Verso UG

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, controller manufacturer: HEIDENHAIN, total height: 2,300 mm, total width: 3,250 mm, overall weight: 3,200 kg, spindle speed (max.): 8,000 rpm, product length (max.): 2,900 mm, number of axes: 3, This 3-axis Eikon MV2 was manufactured in 2003. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 300 mm, and Z-axis travel of 350 mm. The machine is equipped with an automatic tool changer with 20 positions and a maximum tool diameter of 80 mm. If you are looking to get high-quality machining capabilities, consider the Eikon MV2 vertical machining centre we have for sale. Contact us for further details. • Number of tool slots: 20 (one is defect) • Max tool length: 200 mm • Height adjustment: 860 mm • Rapid Traverse: 50 m/min • Main electronic connection: 380 V / 50 Hz / 3-Phase • Power consumption: Approx. 12 kW • Air pressure: 6 bar • Chip conveyor: Length with chip conveyor: Approx. 3,200 mm • Internal cooling: Integrated air cooling system • Air supply: Average air consumption: 3 m³/h • Spindle nose: DIN 2079-40 • Optional spindle speeds: 12,000 rpm or 20,000 rpm • Electronic spindle orientation • Feed rate: 1 – 15,000 mm/min • Absolute rotary serial encoders • Programming resolution: 1 μm • Z-axis equipped with safety brake Bdjdpfx Adezrg Uvoqef • Maximum tool diameter: 80 mm • Maximum tool weight: 3 kg • Tool-to-tool change time: 2 seconds • Minimum spindle-to-table distance: 145 mm • Coolant tank capacity: Approx. 200 litres • Coolant pump capacity: 50 l/min • Coolant wash gun • Length with chip conveyor: Approx. 3,200 mm

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Bdedpjzrbz Refx Adqef Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Bdjdezqunuepfx Adqjf Note: without the machine vice located on the clamping surface.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Huron KX20 vertical machining centre was manufactured in 2002. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. With a spindle speed of 18,000 RPM and a tool magazine with 30 positions, this machine is designed for high-speed performance in molds, dies, and aerospace components. If you are looking to get high-quality machining capabilities, consider the Huron KX20 machine we have for sale. Contact us for further details. Bsdpfx Adozqczcsqodf • Quantity available: 2 units • Purchasing: Special bundle conditions available when buying both units • Key highlights: • High-speed performance for molds, dies, and aerospace components with excellent surface finish • Siemens control and HSK40 taper for seamless integration into modern production Technical Specification Taper Size HSK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,283 h, functionality: fully functional, machine/vehicle number: 7076, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Work table Table clamping area: 1,300 × 600 mm Maximum table load: 1,200 kg Distance from table to spindle bottom edge: 125–725 mm Spindle and tool holder Maximum spindle speed: 6,000 rpm Spindle taper: SK 50 Spindle motor power S1: 10 kW Feeds and rapid traverses Feed rate: 1 – 10,000 mm/min Rapid traverse, X-axis: 20 m/min Rapid traverse, Y-axis: 20 m/min Rapid traverse, Z-axis: 15 m/min Tool changer Number of tool positions: 24 Maximum tool diameter: 80 mm Bsdpezqcu Nofx Adqedf Maximum tool diameter with free adjacent positions: 150 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg MACHINE DETAILS Control operating time: 60,822 h Power-on time: 59,602 h Program runtime: 22,283 h Spindle time: 19,522 h Control type: CNC Control system: Heidenhain iTNC 530 Internal coolant supply: 20 bar Total power consumption: 25 kVA Dimensions & Weight Machine dimensions: 3,600 × 2,300 × 3,000 mm Machine weight: approx. 7,500 kg EQUIPMENT CNC axis control Heidenhain iTNC 530 Electronic handwheel Spindle oil cooler 24-position duplex arm tool changer Preparation for hydraulic machine vise Preparation for 3D measuring probe Chip conveyor Coolant system with internal coolant supply Machine documentation

Condition: used, Year of construction: 1981, functionality: not functional, machine/vehicle number: 24003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Control system modernization, 2007 Control: SINUMERIK 802D sl X/Y/Z axis travel: 1600mm/1200mm/1400mm Tool holder: ISO50 Tool holder diameter: 110 mm Pallet fixture: 800x800 Bedpfxjzqbbzo Adqedf Table dimensions: 1200x1200 Setting accuracy: 10s

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in 06/2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. In addition, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Bdodpfx Adezp Iz Eoqof Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Date of manufacture: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color display Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Direct drive spindle Travel X-axis: 1,200 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Type A High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Heidenhain infrared probe system TS 640 Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Alignment screws and washers CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connected load: 25 kVA Frequency: 50/60 Hz 3 phases Condition: The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off • Maximum height when the Z-axis is fully extended: 3107mm Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) • basic package of tool holders included • no bar feeder included (can be purchased optional, price upon request) • no chuck included • retrofits possible (price upon request) Technical Specification Taper Size ISO 40 Bdsdpfx Adjzn Uqqsqsf

Condition: excellent (used), Year of construction: 2010, Technical specifications: Travel ranges (X/Y/Z): 1460 / 610 / 500 mm Clamping capacity 4th axis: 320 mm CNC control: SIEMENS 840 D - SL Number of axes: 3 Spindle mount: ISO 40 Max. workpiece weight: 800 kg Bdsdpfx Adjzn Rdaoqef Number of positions in the tool changer: 32 Spindle speed: 12,000 RPM Dimensions (length x width x height): approx. 420 x 2500 x 3000 mm Machine weight: approx. 9.5 tons Accessories: Chip conveyor The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-4SSHE was manufactured in 2007. It features a maximum spindle speed of 12,000 rpm and a generous X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a capacity for 24 tools and includes cooling through the spindle and a chip conveyor. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SSHE vertical machining centre we have for sale. Contact us for further details. • Cooling through spindle Bdsdjznv Iwspfx Adqef Additional equipment • Chip conveyor Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, DAHLIH VERTICAL MACHINING CENTRE MODEL MCV 1450 CONTROL FANUC 50 TAPER SPINDLE Bdodoznm Uuopfx Adqef TABLE SIZE 1600 X 800 TRAVELS - 1450 X 750 X 750 MM TABLE LOAD 2000 KGS GEARED HEAD SPINDLE MOTOR 15 KW ATC MACHINE WEIGHT 14.5 TON

Condition: excellent (used), Year of construction: 2005, Hartford VMC 1270 A Year of manufacture: 2005 Control system: Bdedpeznbn Aefx Adqjf - Fanuc - Electronic handwheel Main spindle: - Spindle speed max. 8000 RPM - Tool holder BT40 Travel distances: - X - 1270, Y - 600, Z - 725 mm Tool changer: - 25 magazine positions Table: - Clamping area 1370 x 600 mm Cooling: - Internal coolant supply 20 bar - Chip conveyor Delivery time: - Immediate

Condition: used, Year of construction: 2014, operating hours: 3,600 h, functionality: unexamined, Agie Charmilles / Mikron VCE 1600 Pro CNC machining center Manufacturer: Bdedozmh Nqspfx Adqjf Type: VCE 1600 Pro Year of manufacture: 2014 Operating hours: see photos Further information available upon request.

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 101,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Upon request, the following equipment can also be provided: Bdjdpfx Aozmfn Redqof * Fourth-axis table * Tailstock * Set of tool holders The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2001, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: 810D, total height: 2,830 mm, total length: 2,200 mm, total width: 2,650 mm, overall weight: 7,500 kg, input voltage: 380 V, type of input current: three-phase, In this advertisement, we are offering two machines for sale: a used Quaser MV204II vertical machining center, manufactured in 2001, and a used DMC 103V, manufactured in 1988. Both machines are not fully functional! According to the latest technician's report, the following problems exist: Quaser: - The ball screw of the X-axis needs to be replaced. The function is present (makes noise). - The slide carriage in the Z-axis needs to be replaced. The ball screw is subjected to excessive load. Error: Motor overheating in the Z-axis. - Possible replacement of the data cable connecting the control unit to the control panel. Loose connection. - Age-related wear and tear on other components. DMC 103V: - The machine is partially operational. - Sporadic error during tool change. - Error: Data should be generated in/by the control system. Bsdpfxszl T H So Adqsdf (A data backup must be performed, and then the appropriate software must be installed. See the software version of the control system 810.) - Age-related wear and tear on other components. Quaser Model: MV204II Serial number: 120J430 Control: SIEMENS 810D Date of manufacture: February 2001 Gildemeister Model: DMC 103 V Serial number: 2886-0193 IBN date: June 29, 1988 Operating hours: approx. 9200 If you have any questions or need more information, please send us a message or call us. The price in this advertisement applies to both machines together; dismantling and transportation are the responsibility of the buyer. If there is interest in purchasing only individual parts, this can be discussed.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Spindle speed: 12,000 rpm Tool interface: CAT40 Tool positions: 30 Bdodpfxszl Rzye Adqsf MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Bsdpszlpgnjfx Adqsdf

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PR721523001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC-460, spindle speed (max.): 15,000 rpm, The new price of the machine was approximately €140,000 in 2023! No tools or a vise are included. However, these can be purchased separately upon request. TECHNICAL DETAILS Travel range X-axis: 1,300 mm Travel range Y-axis: 650 mm Travel range Z-axis: 600 mm Spindle speed: 15,000 rpm Main spindle servo motor Siemens: 20/53 kW Main spindle servo motor Fanuc: 15/30 kW Spindle taper: SK 40 Work table Table dimensions: 1,500 × 650 mm Table load: max. 1,200 kg T-slots: 18 × 5 × 100 mm Distance spindle to table surface: 150–750 mm Distance spindle center to Z-axis cover: 697 mm Rapid traverse X/Y axis: 36 m/min Rapid traverse Z axis: 36 m/min Working feed rate: max. 1–12,000 mm/min Feed motors X/Y/Z: 3.2/3.2/4.3 kW Torques of the feed motors X/Y/Z: 20/20/27 Nm Tool positions: 28 Tool length: max. 300 mm Tool diameter: max. 75 mm Tool diameter with free auxiliary positions: max. 125 mm Tool weight: max. 8 kg Tool change time: 1.6 s MACHINE DETAILS Control system: Heidenhain TNC-460 Accuracy without linear glass scales Positioning accuracy over the entire travel range: 0.012 mm Repeatability accuracy over the entire travel range: 0.008 mm Bdjdpfx Ajzlh S Asdqof Accuracy with linear glass scales Positioning accuracy over the entire travel range: 0.008 mm Repeatability accuracy over the entire travel range: 0.006 mm Cooling and power supply Coolant tank volume: 250 l Coolant flow rate: 40 l/min Mains voltage: 400 V ± 10 % Number of phases: 3 Mains frequency: 50 Hz Connected power: 85 kVA Dimensions and weight Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm Weight: 8,000 kg EQUIPMENT Direct drive Double-arm tool changer O-BLUM tool measuring system Lasercontrol NT O-BLUM workpiece measuring system TC50 Electronic handwheel (MPG) Thread drilling without compensation chuck USB interface CF card interface Ethernet interface HIWIN linear guides with roller guides in all axes HIWIN ball screws Directly driven main spindle NSK/FAG main spindle bearings Separate oil-air spindle cooling unit Fully enclosed tool changer for protection against chips Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop Fully enclosed splash guard Separate air conditioning system for heat dissipation from the control cabinet Siemens electrical components Automatic, path- or time-controlled central lubrication system Kyarow telescopic covers in all axes Coolant system with adjustable nozzles as a coolant ring around the spindle Chip flushing system in the interior for optimal chip collection Spiral chip conveyor working in the Y-direction for removing chips from the machining area Rear chain chip conveyor

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: i series, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 6700 was manufactured in 2024. It features an impressive X-axis travel of 1,300 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine includes a robust table size of 1,500 × 670 mm and a maximum table load of 1,300 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 6700 vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Table size: 1,500 × 670 mm • Spindle motor power: 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle head cooling system Bdedpfjzlg Icex Adqjf • Tool magazine type: geared driven • Tool holder type: BIG PLUS BT40 • Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through-spindle coolant: 1.5 kW / 2.0 MPa (20 bar) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • Program capacity: 1,000 programs • AICC II – 200 blocks • iHMI Easy Operating System (EZI & Machining Cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics)

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i Series, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 750 II was manufactured in 2023. It features an impressive X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,800 × 750 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 750 II vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Table size: 1,800 × 750 mm • Spindle motor power: 28 / 15 / 11 kW • Spindle taper: BIG PLUS BT40 Bodozlg Amepfx Adqsdf • Spindle air curtain • Tool holder type: BIG PLUS BT40 • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Machine enclosure: Full splash guard with top cover • Tool load monitoring • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • Data server & memory card: 1 GB • AICC II – 200 blocks • iHMI easy operating system (EZI & machining cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Coolant tank on right side • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Machine lifting hooks

Condition: used, Year of construction: 1998, Mazak 3-axis vertical machining center available for immediate delivery. In good working condition with chip conveyor, synchrotapping and cooling through the spindle. Viewing possible upon appointment. FYI: second identical machine available at the same location in West-Flanders (Belgium). X-travel 1,660 mm Y-travel 510 mm Z-travel 510 mm Bdedpfx Adjzldbaeqsf Table dimensions 2,000 × 510 mm Maximum table load 1,000 kg Spindle taper BT40 / ISO40 Spindle speed 40 – 7,000 rpm Main motor approx. 11 kW Tool magazine 2 × 24 = 48 tools Max. tool length 350 mm Max. tool weight 8 kg Max Tool Diameter Ø 80 mm (110 mm if adjacent position is empty) Rapid traverse X/Y 24 m/min Rapid traverse Z 20 m/min Machine weight 7,320 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Matec 30 L, Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, Bdjdpfxozlc Hnj Adqof 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,300 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, table load: 1,000 kg, spindle speed (max.): 9,000 rpm, number of axes: 3, This 3-axis Cincinnati MAG CFV1300i was manufactured in 2010. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 540 mm, and Z-axis travel of 720 mm. The machine includes a maximum table load of 1000 kg and a maximum spindle speed of 9000 rpm. If you are looking to get high-quality machining capabilities, consider the Cincinnati MAG CFV1300i vertical machining centre we have for sale. Contact us for further details. • Internal cooling: yes • Number of places in the magazine: 24 Bdjdpfozkriiex Adqjf • Accessories sold with the machine: 4 pcs of hydraulic vices • Accessories sold with the machine: tool holders approx. 24 pcs SK 40, both used • Latest replacements/investments/repairs: new spindle + replacement of backup battery in 02/2026

Condition: ready for operation (used), Year of construction: 1998, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, controller manufacturer: Mazatrol M Plus, table width: 510 mm, table length: 2,000 mm, overall weight: 7,320 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 36,000 h, number of spindles: 1, number of slots in tool magazine: 48, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, We are offering this used Mazak VTC-20C vertical machining center, manufactured in 1998. Manufacturer: Mazak Model: VTC-20C Year of manufacture: 1998 Condition: ready for use Category ID: 1452 Type ID: 4156 Machine type: vertical machining center Control: Mazatrol M Plus Operating hours: approx. 68,000 Spindle hours: approx. 36,000 Work table Table size: 2000 x 510 mm T-slots: 5 pieces Distance between T-slots: 100 mm Slot width: 18 mm Travel distances X-axis: 1660 mm (with partition 2 x 560) Y-axis: 510 mm Z-axis: 510 mm Rapid traverse rate Rapid traverse: X/Y/Z-axis: 20 m/min X/Y/Z-axis 1 - 5,000 mm/min Tool magazine Bodpfjzkklisx Adqsdf Tool holder: SK 40 Tool positions: 2 x 24 Spindle speed: 10,000 rpm Accessories: Partition; Renishaw probe; chip conveyor !!! Optionally with 2 Röhm vices If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Bdedpfxjzkbr Te Adqof Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.