Ecmo Industrie

Year of construction: 2001, condition: ready for operation (used), Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Individual sale possible. Ncjdpfxjy E S D Sj Ah Njr

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Ncodpey E S Drsfx Ah Njr

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2300mm/800mm/600mm, table dimensions X/Y: 1400mm/750mm, rotary table dimensions X/Y: 800mm/630mm, spindle speed: 12000rpm, tool positions: 30, tool holder: SK40, coolant pressure: 20bar, feed rate: 30m/min, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6200mm/3700mm/3600mm, weight: approx. 16000kg, control: Heidenhain iTNC 530, control hours: 63330h, machine hours: 61892h, operating hours: 28295h. Including internal coolant supply, 3D measuring probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Ncedpey E S Dlofx Ah Njr

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Ncedpfxoy E I R Uo Ah Nsr Machining length up to 6100 mm Automatic material feed Automatic infeed Drive: 5.5 kW Accessories: support tables Tool holders, cutters Coolant system Digital display Weight: 4 t Price: EUR 3,000 – plus VAT ex location

Year of construction: 1985, condition: ready for operation (used), A conventional milling machine Zimmermann including a Heidenhain digital display is available. Table dimensions X/Y: 1400mm/800mm, tool holder: SK40, travel X/Y/Z: 1600mm/900mm/300mm, spindle-table distance range: 30mm-1180mm, milling head swivel: 45°/90°, feed rate: 2400mm/min, speed: 2800rpm. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/3150mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible. Nsdpfxsy Eqtpe Ah Necr

Year of construction: 1994, condition: ready for operation (used), A Graule notching machine and a Rotox copy milling machine are available. 1) Graule AS 450 notching machine, year of manufacture: 1994, saw blade diameter: 350mm/450mm, bore: 40mm, speed: 2800rpm, max. notching dimensions X/Y/Z: 250mm/110mm/153mm, weight: approx. 400kg. 2) Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible. Nedpoy D Tq Dofx Ah Njcr

Year of construction: 1990, condition: ready for operation (used), Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible. Ncsdpey D Trhjfx Ah Ner

Year of construction: 2015, condition: ready for operation (used), X-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24000rpm, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle taper: HSK 40, total connected load: 85kVA, weight: 33t, with paper filter. an on-site inspection is possible. Nsdpfxoy A Slkj Ah Nocr

Year of construction: 2010, condition: ready for operation (used), X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible. Nsdpfxjy A Sldo Ah Njcr

Condition: ready for operation (used), A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible. Ncjdsy Anubjpfx Ah Ner

Year of construction: 2012, condition: ready for operation (used), travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, spindle motor power: 35,000 W, spindle speed (max.): 18,000 rpm, table load: 2,000 kg, number of axes: 3, This 3-axis Eumach LBM-1500 bed type milling machine was manufactured in 2012. It features a generous table dimension of 1600 x 1000 mm and impressive axes strokes of 1750 x 1000 x 650 mm. With a rotation speed of 18000 rpm and a forward speed of 10000 mm/min, this machine is designed for high-performance milling applications. If you are looking to get high-quality milling capabilities, consider the Eumach LBM-1500 machine we have for sale. Contact us for further details. Ncsdey Amrxepfx Ah Nsr • Table dimensions (X/Y): 1600 x 1000 mm • Feed rate (forward speed): 10,000 mm/min

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, total width: 600 mm, total height: 2,000 mm, spindle motor power: 35,000 W, product length (max.): 1,400 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis Eumach LBM-2000 was manufactured in 2013. It features a generous table dimension of 2100 x 1600 mm and impressive axes strokes of 2200 x 1750 x 650 mm. The machine is equipped with a HEIDENHAIN controller and offers a maximum rotation speed of 18000 rpm. If you are looking to get high-quality milling capabilities, consider the Eumach LBM-2000 bed type milling machine we have for sale. Contact us for further details. Ncsdpfey Amngex Ah Nsr • Table Dimensions (X/Y): 2100 x 1600 mm • Forward Speed: 10000 mm/min

Year of construction: 2012, condition: ready for operation (used), A CNC vertical milling machine POS is available. Travel X/Y/Z: 1050mm/530mm/630mm, table dimensions X/Y: 1150mm/560mm, max. table load: 700kg, tool holder: SK40, tool stations: 30, speed: 10000rpm, feed rate: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 7600kg, control: Heidenhain. Documentation available. An on-site inspection is possible. The machine has a defect. Ncedpjyz Antofx Ah Ner

Year of construction: 1998, condition: used, ID No.: F40205, T-slot clamping table: approx. 4,200 x 960 mm; HEIDENHAIN control; chip conveyor KNOLL 200 S-1/50, year of manufacture: 1997, serial no.: 33897; belt filter KNOLL VRF 150, year of manufacture: 1998; hydraulic unit; control cabinet; cooling system BKW DL32V/4519-1KKSRZP, total machine length: approx. 10 linear meters. Ncodjyzthqopfx Ah Nor

Condition: ready for operation (used), Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment. Ncsdpfx Aeyzr H Esh Nsr

Year of construction: 1996, condition: ready for operation (used), Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible. Nodoyyy Nrspfx Ah Necr

Condition: good (used), Year of construction: 1962, Manufacturer: VEB Fritz-Heckert-Werk Karl-Marx-Stadt Model: GFL 400x1000 Machine designation: GFL Year of manufacture: 1962 Serial number: 47015 Machine type: Long thread milling machine Total weight: 3 t Table size: 400 x 1000 mm Power supply: 3~ three-phase Frequency: 50 Hz Operating voltage: 380 V Ncsdpfxsyyvtge Ah Nsr Control voltage: 220 V Connected load: 3.7 kW Rated current: 8 A Fuse: 10 A Condition: operational

Year of construction: 2025, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, spindle motor power: 20,500 W, spindle speed (max.): 5,000 rpm, table load: 3,000 kg, number of axes: 5, This 5-axis SACHMAN TS10 bed type milling machine was manufactured in 2025. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details. • Gooseneck: 1,000 mm • Axis speed (rapid): 25 m/min • Table size: 2,700 x 800 mm • Handwheel: Portable HR 510 • Milling head: KOSMO3 Universal • Spindle taper: SK50 BIG PLUS • Indexing: B/A 0.02°/0.02° (Hirth coupling) • Tool magazine: MRT24 (24 positions), vertical change position • Enclosure: Standard housing (no roof) • Training: 2-day operator course at customer site Ncjdpfeyxpmqox Ah Ner • Delivery time: Approx. 4 months from order • Warranty: 12 months Additional equipment • Chip management: 2 x screw conveyors along X-axis + additional belt conveyor in Y-direction • Internal cooling: 15 bar through-spindle coolant with bag filter • External blow-out air

Year of construction: 2013, condition: ready for operation (used), A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible. Ncsdpfxeyw Svle Ah Njr

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible. Nedpfx Aeyw Swcsh Nscr

Condition: used, Year of construction: 1978, functionality: fully functional, wheel diameter: 500 mm, Bevel Gear Milling Machine ZFTKK 500 (spiral bevel) For sale: bevel gear milling machine ZFTKK 500 designed for machining spiral bevel gears. The machine is ideal for gear production applications, offering high precision and consistent repeatability. Technical specifications: Ncsdpfxeyw Rpkj Ah Ner Max. gear diameter: 500 mm Max. module: 10 mm Max. face width: 71 mm Number of teeth: 6 – 100 Max. ratio: 1:6 Radial adjustment: 30 – 220 mm Bevel angle adjustment: 0 – 90° Cutting speed: 40 – 80 m/min Machine in very good technical condition, ready for operation.

Year of construction: 2014, condition: used, functionality: fully functional, CNC Gear Hobbing Machine Vistan 53B30P For sale: CNC gear hobbing machine Vistan 53B30P equipped with Siemens Simatic Touch control. The machine is designed for precise gear manufacturing, offering high productivity and repeatability. Technical specifications: Max. gear diameter: 320 mm Max. module: 6 Max. gear width: 220 mm Ncjdpfxjyw Nw Tj Ah Nor Clamping spindle diameter: 250 mm Max. hob diameter: 160 mm Max. vertical travel of chamfering unit: 250 mm CNC control: Siemens Simatic Touch Machine in very good technical condition, ready for operation.

Year of construction: 2001, operating hours: 26,266 h, condition: used, Empty weight: 7.000 kg Dimensions (LxBxH): 350 x 220 x 240 cm Price: On request Milling machine, VMC Model: CNC Manufacturer: DMG / Deckel MAHO Type: DMU60T Year of manufacturing: 2001 Control: Heidenhain Working-hours: 26266 Travel: 630x560x560mm Spindle-speed: 10.000 rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes Ncsdpfxoywt Nyj Ah Nor - CE certificate present: No - Operating hours: 26266 - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 560 - Z-axis travel [mm]: 560 - Table length [mm]: 1000 - Table width [mm]: 600 - Tool holder: SK40 - Max. spindle speed [rpm]: 10000 - Options: External cooling, Tool magazine - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Ncjdpfoyv H Hisx Ah Nsr

Condition: ready for operation (used), Year of construction: 1992, travel distance X-axis: 1,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, overall weight: 10,000 kg, spindle speed (max.): 2,000 rpm, number of axes: 3, This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details. • Spindle: Universal head • Table: Fixed table • Tooling: Tool changer — No Nsdpfjyvuclox Ah Necr