Baldų linija, UAB

Condition: good (used), Year of construction: 2006, Arburg 370U 600-290 (2006) CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Dedpfo Aid Srox Apiekw Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A Clamping force: 60 t Screw diameter: 35 mm Shot weight: 132 g Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Shot volume: 144 cm3 Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030716, type of input current: three-phase, total length: 18,000 mm, total height: 4,000 mm, total width: 5,000 mm, input voltage: 400 V, overall weight: 8,000 kg, compressed air connection: 1 bar, control cabinet length: 600 mm, control cabinet width: 1,600 mm, control cabinet height: 1,800 mm, year of last overhaul: 2025, Machine Description Sano Sp. z o.o. offers for sale a used production line consisting of two automatic bagging machines from Arodo (Belgium) and an automatic palletizer. The equipment is designed for the automatic packaging of bulk materials, powders, and granular products into bags, followed by automatic palletizing. The machines operated in daily production and remained in working order until they were replaced with new equipment. The machines are in good technical condition and ready for further use. Technical Specifications: 1. Automatic Bagging Machines – 2 units - Year of manufacture: 2003 - Manufacturer: Arodo (Belgium) - Weight range: 10–50 kg per bag - Output: 600–800 bags per hour - Digital weighing system - Siemens control. 2. Automatic Palletizer – 1 unit - Output: up to 1500 bags per hour - Automatic system for stacking bags on pallets - Supports EURO pallets. Key Advantages: - Robust, industrial design - Automation of the bagging and palletizing process - Ability to package bulk materials and granules - Automated weighing systems - Available technical documentation - Can be used in the food, chemical, construction, and agricultural industries. Dsds Aid Snepfx Apiskw Dimensions: length 18 meters, width 5 meters, height 4 meters Weight: 8,000 kg Price: 80,000 EUR gross. It is possible to inspect the machines at the Sano Sp. z o.o. premises by prior arrangement. Phone numbers: +4861 29 41 105, +4861 29 41 160, +48 669 330 409

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Dkjdpfx Ao Aid Skjpiew Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, Sepation for Gravel and Stone Dksdpfx Aj Aid Sgepiew Year - 2002 Capacity - 300t(h Number of fractions - 4 - ( 0-4 mm ; 4- 8 mm; 8-16 mm; 16-90 mm ) Line still in production !!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, AUTOMATIC CHOPPING MACHINE FOR STONES, MAXIMUM LENGTH 425 MM, MAXIMUM WIDTH 50 MM. COMPLETE WITH VARIOUS ACCESSORIES, DIVIDERS, BUSHINGS, AND TOOLS. Djdpfxo Aid Sco Apiokw

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Channel baling press Paal Konti 200 D, year of manufacture 2000 Technical data: Manufacturer: Paal Type: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-way automatic Throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Dkjdpfxe Aid R Ue Apiew Transport dimensions approx. 10123 x 2152 x 2720 mm (L x W x H) Machine weight approx. 15,000 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: excellent (used), mileage: 336,181 km, power: 279 kW (379.33 HP), first registration: 01/2004, fuel type: diesel, tire condition: 60 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, air conditioning, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Central lubrication - Day Cabin - Disc brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = More information = General information Year of construction: 2004 Axle configuration Tyre profile: 60% Brakes: disc brakes Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Functional Tipper: Back Dsdpfo Aid R Rsx Apijkw Condition Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 1995, operating hours: 55,000 h, functionality: fully functional, machine/vehicle number: 162573, clamping force: 800 kN, overall weight: 4,500 kg, Overall condition good. Machine was working in production until the operations were stopped. Machine is stored into a warehouse since 2024. Location - Estonia, Hiiumaa Dedpfe Aid R Hjx Apiskw

Condition: used, capacity 500L. all stainless steel double jacket Dkjdpfj Aid Rxjx Apiew 36 kW tiltable drum stirring system with scrapers electric heating dimensions (l x w x h) : ± 1.900 x 1.900 x 1.800 mm

Condition: ready for operation (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Channel baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connection: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at: Dkedpfx As Aid Ruspiew 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in fully functional condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, continuous grilling line suitable for: roasting, cooking or browning electric heating 108 kW 3 x 400 V with lower and upper belt : bottom and top grilling overall dimensions (l x w x h) : ± 5.150 x 1.800 x 2.250 mm net length 2.900 mm belt width 600 mm max 265 degrees Dedpfx Ape Aid Rqsiokw gap height adjustable adjustable speed pneumatically controlled belt with belt wash system

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Product ejector (right) Knife cover Bowl cover Automatic lubrication Loader for Eurobins 200L (left) Weight: ± 5.390 kg Dedpfxs Aid Rme Apiekw Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists Djdpfe Aid Rijx Apiskw dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, Year of construction: 2006, Arburg 370 U 600-290 (2006) CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Dkodpfx Apj Aid Rfoijw Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Dodpfs Aid Rbox Apiokw Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, Year of construction: 1994, operating hours: 64,000 h, functionality: fully functional, machine/vehicle number: 160059, clamping force: 1,000 kN, overall weight: 5,000 kg, Overall condition good. Machine was used in production until the operations were stopped. Dkjdpfx Ae Aid N Tspiow It has been stored into a warehouse since 2024. Location - Estonia, Hiiumaa

Condition: used, all stainless steel for product up to 530 x 530 mm Dimension: (L x W x H): 950 x 1.450 x 1.900 mm 3 x 380V, 50Hz, 22kW Dkjdpfx Aj Aid N Nepiew

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, Sheet metal round bending machine 3 rollers Manufacturer: Seravesi Model: E 79 3162 Bending length: 3100 m Diameter of upper roller: 620 mm Diameter of lower roller: 520 mm Dedpfxe Aid N Ej Apijkw Pre-bending: 1.5 x material thickness, 48 mm Rolling: 5 x material thickness, 67 mm Working height: 1800 mm Weight: 48000 kg Dimensions: 700 x 328 x 307 cm Rotation speed: 3-6 m/min 400 V, 50 Hz, 3-phase 60 kW Other models available upon request Bending lengths from 1000 mm to 6000 mm Bending thicknesses from 20 mm to 150 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 20,636 h, load capacity: 1,000 kg, lifting height: 5,100 mm, free lift: 1,670 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,185 kg, total height: 2,250 mm, total length: 1,650 mm, total width: 1,280 mm, fuel: electricity, Equipment: sideshift, STILL FM-X 10 – Reach trucks TECHNICAL DATA Lifting capacity: 1.000 kg Lifting height: 5.100 mm Closed height: 2.250 mm Free lift: 1.670 mm Mast: Triplex (3F510) Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V/620 Ah (2016) Charger: Dreiphasig 48 V - not tested Tyres: Polyurethan Service weight: 3.185 kg Length: 1.650 mm Width: 1.280 mm Year of manufacture: 2017 Operating hours: 20.636 h Condition: working condition EQUIPMENT 4th valve, Front work lights Dkodpfx Apo Aid Nzeiew ATTACHMENTS Sideshift Internal no.: 1309091 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, total width: 3,200 mm, total length: 1,600 mm, total height: 1,400 mm, warranty duration: 6 months, overall weight: 900 kg, Gluing machine LN 3000 – in excellent condition Technical characteristics: Working width: 3000 mm Dimension: 3200 W x 1600 L x 1400 mm H Capacity: 1500 pcs/h Year of manufacture: 2023 Mass: 900 kg Buying directly from the manufacturer EMproject89 Dedj Aid Ntepfx Apiskw The machine is inspected by EMproject89 technicians and has extended warranty of 6 months. During the extended warranty period, we grant 20% discount on spare parts.

Condition: used, Year of construction: 1998, functionality: not functional, machine/vehicle number: 154322, clamping force: 1,500 kN, overall weight: 7,100 kg, Overall machine condition is good. Dkodpfx As Aid Nhspiew Machine was working in production until plant operations were stopped. Machine was stored into a warehouse in 2024. Since then it has not been in use. Machine is not connected to power outlet, battery from the electronic plate has drained. Therefore some data is missing from the machine. Machine powers up, but it is not functional at this moment. Location - Estonia, Hiiumaa.

Condition: excellent (used), Year of construction: 2002, Brand - PINOSA Italy Djdpfe Aid Ndsx Apiskw Model - EPC 3300 Construction year - 2002 The condition is excellent Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons.

Condition: ready for operation (used), Festo Didactic Pneumatics Workbench Learning System, Training Trolley with Accessories Accessories: see photos You are welcome to visit us for a viewing. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Djdpfj Aid Najx Apiokw Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2022, operating hours: 634 h, functionality: fully functional, Manufacturer: Glass Model: VSM80F Year: 2022 Condition: Used Dodps Aid I Sofx Apiokw Serial number: 4396 Stock number: 3377 Capacity: 80 liters Infeed height: 950 mm Outfeed height: 870 mm Compressed air: 6 Bar Steam: 4 Bar, DN25 Power: 3 x 400V, 50Hz, 2.8kW Dimensions: 1400 x 2100 x 1650 mm Weight: 780 kg With double-walled construction and steam injection. Includes temperature sensor and 10.4" touch panel. Only 634 operating hours, in new condition!

Condition: like new (used), mileage: 106,000 km, fuel type: diesel, Year of construction: 2021, FIAT DUCATO 2.3MJT, 2021 model, 106,000 km, with a fixed body measuring 4.20 x 2.10 meters, air conditioning, recently serviced, 1-year warranty. On-site financing options available. Dsds Aid Ivspfx Apiskw