Χ & Ε Χαιρετη Ο.Ε.

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) Application: Depalletising of new glass containers Configuration: Z-arrangement with pallet infeed and upper-level container discharge Pallet handling: Pallet lifting unit with automatic empty pallet discharge Discharge table: approx. 5,000 mm length Conveyor: Steel chain conveyor Drives: Servo drives (SEW) Sweep-off system: Four-sided centring carriage, servo-driven Layer handling: Integrated handling module with suction gripper system for layer pads and top frames Vacuum system: Ejector-based System Configuration: Pallet lifting unit Container discharge table (approx. 5,000 mm) Steel chain conveyor system Handling module with suction gripper Packing material magazine Empty pallet discharge system Safety fencing (approx. 25 m) Light barriers and safety circuits Isdey Tn D Dopfx Ahqetg

Condition: used, Year of construction: 2011, Overview This fully automatic palletizing and pallet wrapping system was manufactured in 2011 by Italy SIPA / ROBOPAC. The system is designed for palletizing and wrapping of shrink-packed PET beverage products. It includes a complete palletizing setup with infeed conveyor, layer forming, interlayer handling, pallet transport, and downstream ring wrapping. The system is dismantled, complete, and in good condition. It is available immediately.  Technical data Capacity: approx. 39 pallets/hour 2.0 L (3x2): approx. 2,500 packs/hour 1.5 L (3x2): approx. 2,500 packs/hour 1.0 L (3x2): approx. 2,600 packs/hour 0.5 L (4x3): approx. 1,300 packs/hour Formats: 2.0 L / 1.5 L / 1.0 L / 0.5 L PET shrink packs Euro pallet (1200 × 800 mm) Application: Palletizing and wrapping of shrink-packed PET bottles Configuration: Palletizer: SIPA GENIUS PTF/1 Ring wrapper: SIPA / ROBOPAC HELIX HS30 System Configuration: 1 infeed line Infeed conveyor system Layer forming system Palletizing unit Interlayer magazine Interlayer placement robot with vacuum system Empty pallet magazine Pallet conveyors (infeed and outfeed) Ring wrapper (automatic pallet wrapping) Safety fencing Two electrical cabinets Ijdpfxey Tnz No Ahqetg

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Capacity: 20000 l/h Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Material: stainless steel Position: mounted on stainless steel frame with feet Itjdpfx Aoy Ti Anehqog Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping

Condition: used, CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings Additional title: Cleaning system with 5 vessels Material: vessels from stainless steel Position: vessels standing on 3 feet each Base construction: flatconical vessels Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterfly valves; pipe panels various other valves, pipework and fittings Isdpfey Tizwox Ahqstg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: Z00004955, input voltage: 400 V, Equipment: documentation/manual, Professional essential oil and hydrosol extractor manufactured by Albrigi Luigi S.r.l., model DRAGO PRO 250L. This machine is designed for steam distillation of medicinal plants, aromatic herbs, flowers, and plant-based raw materials. The unit is in excellent condition, fully functional, used very little, and carefully maintained. Key technical specifications: Manufacturer: Albrigi Luigi S.r.l. Model: DRAGO PRO 250L Type: essential oil extractor / steam distillation unit Capacity: 150–250 liters Year of manufacture: 2019 Power supply: 380/400 V Phases: 3 phases Frequency: 50/60 Hz Power: approximately 18.75 / 19 kW Structure: stainless steel Machine on wheels User and maintenance manual available CE marking present CAREL humiSteam x-plus system visible on board the machine Machine condition The machinery is in very good overall condition, fully functional, and used very little. Stored in a suitable environment. It shows normal aesthetic signs of use, without affecting its functionality. Reason for sale Sale due to disuse following a change in the production line. Iedpfxey S A S Ts Ahqetg Available for viewing by appointment. Additional photos, videos, and technical documentation are available upon request. Sold with a valid invoice.

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum filling Bottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage productio.. Itedpfxey Szcwe Ahqjg

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements includin... Itodpfx Aoy Szb Hjhqeg

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer prepares ca... Itsdpfxey Szbye Ahqog

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line fro glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 200 BPM (miniature 0.05L bottles)Filling type: vacuum filling Bottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant au... Itedoy Sxgmspfx Ahqog

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 19-6-1, Equipment: documentation/manual, Complete Craft Brewery Equipment We are offering for sale a complete and fully functional equipment for a small craft brewery in top condition. The equipment is located in Slovakia. We can arrange for careful dismantling and loading of the technology. Detailed technical documentation is available. Basic Specifications: Brewhouse - 4-vessel system (Mash/Boil tun, Lauter tun, Whirlpool, Hot water tank) - Net wort volume per batch: 1000 l - Number of pumps: 3 - Stainless steel exhaust chimneys - Boil tun heating: Steam (two circuits: 1. bottom, 2. jacket) - Hot water tank heating: Steam - Thermal insulation of vessels - Vessel lighting - Boil tun agitator with speed controller - Grain rake in the lauter tun - Control unit - Stainless steel platform and stairs Steam Generator - Gas-powered - Output: 120 kg of steam / hour - Steam temperature: 170 °C - Water tank capacity: 40 l Malt Scale - Platform scale CAS DB2 - Max. capacity: 150 kg - Division - accuracy: 50 g - Platform dimensions: 460 x 570 mm Malt Mill - Electric roller mill with adjustable gap - Capacity: 600 kg / hour - Hopper capacity: 150 l - Power supply: 380 V - Motor power: 2.5 kW - Speed: 1400 RPM Tanks (Fermenters) - 8 pcs - Fermentation, cylindroconical, vertical tank (CCT) with cooling jacket and thermal insulation - Total volume: 1200 l - Net volume: 1000 l - Max. working pressure: 1.5 bar - 2-circuit cooling jacket - Manhole (inspection opening) - Pressure relief safety valve - Spunding valve with pressure gauge - Rotary CIP spray ball - Temperature sensor - Beer inlet/outlet valve - Sample valve Cold Water Tank (CWT) - Vertical tank with cooling jacket and thermal insulation - Volume: 2000 l Plate Heat Exchanger for Wort Cooling - Capacity: 500 l / hour - Number of working plates: 21 - Working plate area: 0.09 m² - Total heat exchange area: 1.89 m² Cooling System for CWT and Tanks - Two units (internal and external) - Cooling capacity: 10.6 kW - Cooling medium: Monopropylene glycol and water mixture - Coolant tank volume: 200 l - Power supply: 380 V Iedoy Sv Hkspfx Ahqjtg - Power consumption: 4.5 kW - Tanks cooling control unit CIP Station - Number of vessels for sanitation mixtures: 2 - Volume of each vessel: 100 l - Power supply: 380 V - Heating element power: 4 kW - Pump motor power: 0.75 kW KEG Washer and Filler - Capacity: 10 KEGs / hour - Power supply: 380 V - Heating element power: 3 kW - Pump motor power: 0.45 kW Bottle Filler - Semi-automatic bottle filler for 0.33 l and 0.5 l bottles - Capacity: 200 bottles / hour - Power supply: 220 V

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data Manufacturer: Kisters Maschinenbau GmbH Model: Wrap Around Packer 420/50 Machine Type: Wrap-around packer / secondary packaging machine Year of Manufacture: 2001 Capacity: up to approx. 50,000 bottles/hour Operating Hours: 16,976 h Application: Packaging of PET one-way bottles Previous Use: PET one-way beverage line Current Status: Taken out of operation due to line reconfiguration Bottle Formats: 0.33 l, 0.355 l, 0.5 l Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 inkl. shrink application for trays  Listed Formats: 0.33 l LNB 2x12 tray 0.355 l LN 2x12 tray 0.33 l LNB 4x6 tray 0.355 l KN 4x6 tray 0.33 l LNB 3x8 tray 0.355 l LN 3x8 tray 0.5 l LN 4x6 tray 0.5 l LN 6x4 tray 0.5 l LN 4x6 KLW full carton 0.33 l LN 4x6 loose wrap-around 0.33 l LNB 4x6 90° tray 0.355 l LN 4x6 90° tray 0.33 l BA 4x6 loose wrap-around 0.33 l BA 3x4 loose wrap-around 0.33 l Miller 4x6 loose wrap-around 0.33 l Salitos 4x6 loose wrap-around 0.33 l Vichy 4x6 tray cluster 0.33 l LN 4x6 tray cluster 0.33 l LN LCE 4x6 full carton 0.33 l EW 4x6 export full carton 0.33 l EW 4x6 export tray 0.5 l EW 4x5 loose wrap-around Itedpfx Ahsy Sidvjqeg

Condition: used, Year of construction: 2012, Overview This craft brewery system was manufactured in 2012 by Slowbeer and other manufacturers. The system is designed for beer production and includes brewhouse, fermentation vessels, milling equipment, and temperature control units. The machines are described as in very good condition with low operating usage. Technical data Capacity: 250 L brewhouse Application: Beer production Configuration: Brewhouse, multiple fermenters, malt mill, heating and cooling unit Scope of Delivery  Brewhouse | Slowbeer | MB 250E | 2012 | 250 L brewhouse system Fermenter | 2012 | 500 L stainless steel fermenter with CIP system Fermenter | 2012 | 2 × 1,200 L isobaric conical fermenters Fermenter | 2012 | 1,200 L isobaric flat-bottom fermenter Malt mill | Sommer | Piccolo 11S | 2012 | Capacity 100–150 kg/h with support frame and hopper Heating and cooling unit | Winus | Model M | 2012 | Control unit with 4 digital thermostats for up to 10,000 L Pump | 2012 | Transfer and cleaning pump with inverter Itjdpfx Ahsy Sic Soqog

Condition: used, Year of construction: 2006, Overview This Tetra Pak Tetra Fino Aseptic filling line, manufactured in 2006, is designed for the filling of UHT milk and other liquid food products in pillow-shaped aseptic cartons (Tetra Fino® 1000 ml format). The system enables aseptic filling of ultra-pasteurized products, allowing extended shelf life without refrigeration. With a capacity of approx. 3,600 packs per hour, the line is suitable for small to medium-capacity dairy production. The line consists of a bag forming and filling machine, conveyor systems, and a carton closing module, with manual packing into boxes. The equipment is currently in production and reported to be in good condition. Technical data Manufacturer: Tetra Pak Machine type: Aseptic carton filling line (pillow pack) Format: Tetra Fino Aseptic 1000 ml Year of manufacture: 2006 Operating hours: approx. 18,625 h Capacity: approx. 3,600 packs/h Filling stations: 1 Filling system: tbc Filling type: Aseptic filling Product: UHT milk (example: 137°C / 4 sec) Suitable for liquid food products Equipment Aseptic filling machine (bag forming from roll) Conveyor system for package transport Conveyor system for carton handling Manual packing station (bags into cartons) Automatic carton closing module (SOCO System, year 2014, approx. 740 h) 1 m mesh conveyor (outfeed for full cartons) Roll handling trolley (for heavy packaging rolls) Aseptic filling valves (ABC Valve) Itsdpfoy Sh Tvjx Ahqsg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, tank capacity: 700 l, A small brewery is being offered as a complete package – perfect for getting started right away! The setup has been in use since 2022 in this configuration and is in excellent condition. Plug & play – no complicated installations required. Simply connect and start brewing! Brewiks 500 Two-Vessel Brewhouse * Electrically heated with 36kW – can also be operated with 18kW * 760-liter brew kettle, lauter tun with 840-liter capacity * For grain bills up to 190kg and 640l of cold wort * Brewing control via touch interface with recipe management, automatic mashing program, timer function, and manual mode * Hot liquor is heated via integrated heat exchanger * Wort chilling also integrated! * With steam condenser * Optional double-batch extension available directly from the manufacturer – efficiency boost! * Version with detachable sidearm – allows vertical transport through relatively narrow doorways Speidel ZKGs (Cylindroconical Fermenters) * 2.5 bar test pressure * 3 units of 625l each * 1 unit of 240l * Jacket-cooled * Including complete accessories + additional clear-outlet taps Kreyer Chilly 35 LT cooling unit Sommer Piccolo Malt Mill Incl. chassis and bagging spout Bottle Guard Counter Pressure Filler 2-head machine Incl. rinser Ercole Electric Crown Capper Godex Label Printer + Rewinder Manual Labeler Flexlabeller Ijdpfxoy Shzge Ahqstg Various additional accessories and small equipment, KEGs including filling technology, etc., available on request.

Condition: used, Year of construction: 2015, Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data Application: Beer (bottles & cans) Filling type: Isobaric Filling & Seaming Bottle formats: 33 cl, 50 cl, 75 cl Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) Can formats: 33 cl, 44 cl, 50 cl Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse Capacity: 650 L Heating: Propane gas Electrical: Single-phase Fermentation & Cooling Total fermentation capacity: 9,800 L Stabilization capacity: 2,940 L Dimensions (refrigeration unit): approx. 1,100 × 930 × 840 mm Scope of Delivery  Isobaric Bottle & Can Filler | Inox CG | — | — | 350–400 bph/cph Can Seamer | — | — | 2022 | Brand new, never used Brewhouse | — | — | 2015 | 650 L, propane gas, agitator Refrigeration Unit | W3/4 | — | 2020 | Multi-unit control, 4 zones Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, cooling jacket (Unit 1) Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, airlock (Unit 2) Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 650 L, dry-hopping port Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 320 L, dry-hopping port Atmospheric Fermenter | — | — | 2015 | 650 L, non-insulated Semi-Automatic Labeller | — | — | 2015 | Circular reel labels Stainless Steel Kegs | — | — | — | 50 pcs, 30–50 L Itsdpfx Aey Sccxshqjg

Condition: used, Year of construction: 2011, Overview This shrink-wrapper was manufactured in 2011 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) and PET bottles (0,5L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data  year of manufacture: 2011 capacity 60/min  adjusted formats: 1,5L PET (2x(3x2)) and 0,5L PET  operation: film only  application: water, beer, CSD condition: very good, still connected  Additional information conveyor for packages available Isdjy Sccrjpfx Ahqjtg

Condition: used, Year of construction: 1991, Overview This isobaric PET bottle filling and capping machine was manufactured in 1991 by German company SEN AG (Seitz Enzinger Noll AG). The block machine includes an Zalkin capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 124 number of capping stations: 20 isobaric filling system suitable to carbonated soft drinks capping system: Zalkin for screw caps  cap feeding system: Gassner  capacity: 19.900/h at 1,5L formats: 1,5L PET and 0,5L PET   direction: left-right  Iedey Sccljpfx Ahqstg

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 5,1kW Two lanes Additional information conveyor for packages available Isdpfsy Scb Ujx Ahqotg

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 3,6kW Two lanes Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available Itjdpfx Ahsy Sccfsqsg

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  manufacturer: ENOS, Italy model: Eticap year of manufacture: 2008 labelling Heads: 2 (wet-glue heads) Head 1: front and neck labels Head 2: back labels operation Direction: Left to right production Capacity: 4.000/h adjusted for: cylindrical glass bottles 0,7 L = Ø75mm 1,0 L = Ø86mm condition: Stored off-line since 2020, machine in a good condition actual label sizes:  front label: 131mm height, 77mm width back label: 114mm height, 66mm width Itedpfxsy Scb Ie Ahqog

Condition: used, Year of construction: 2001, GIANAZZA Vacuum Evaporator - Grape Must Concentration Plant Description: Professional industrial plant for the concentration of grape must and fruit juices. Manufactured by the world-renowned Italian specialist Gianazza Technology, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Gianazza Technology SpA (Italy) Year of Construction: 2001 Material: High-grade Stainless Steel (Inox) System Type: Multi-stage Vacuum Evaporator Components Included: * Main Evaporation Columns Complete Control Panel (Digital PID Controllers) Pumping Station (Salvatore Robuschi centrifugal pumps) External Cooling Tower / Heat Exchanger unit Stainless Steel Storage/Buffer Tank Condition: Professional industrial condition, regularly maintained within a winery environment. Itedpey R I Dxsfx Ahqsg Applications: Enrichment of grape must (Sugar concentration). Production of Rectified Concentrated Must (RCM). Fruit juice concentration.

Condition: used, Year of construction: 2004, functionality: fully functional, SIPREM INTERNATIONAL PCM 400 Professional continuous pneumatic membrane press for high-volume grape processing. Model: Siprem PCM 400 Type: Continuous Membrane Press Processing Capacity: 32 - 45 Tons/hour (Fresh grapes) Max Capacity: Up to 55 Tons/hour (Fermented grapes) Year: 2004 Weight: 13,000 kg Itedpfx Aey R I Drohqeg Condition: Excellent industrial condition, fully operational. Key Advantage: Unlike batch presses, this system allows for uninterrupted 24/7 grape processing with high-quality must extraction.

Condition: used, Year of construction: 2013, machine/vehicle number: LC630, Used KHS Beer can line - 48.000 CPHTechnical Specifications & Performance DataThis KHS complete beer can bottling line is engineered for high-speed beverage production and industrial packaging performance. It is a second hand, used bottling line configured for aluminum cans with robust components across depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The line delivers consistent throughput and quality suitable for large-scale beverage production.Production speed: up to 48,000 cans per hour at 0.5L; 41,000 cans per hour at 0.568LContainer types: Aluminum cansFormats: Compatible with 0.5L, 0.568L can formatsCan dimensions: Diameter 66.30 mm; Height 168 mmLid specifications: Aluminum; Diameter 59.44 mm; Height 2.07 mmFilling technology: Volumetric pressure filling with MID (magnetic inductive flow meters)Seaming technology: High-speed multi-head can seamerPasteurization: KHS INNOPRO KZE 250 flash pasteurizerInspection: KHS Innocheck CUB fill level and closure inspectionPrimary installation year: 2013 (pallet wrapper 2020)Manufacturer: KHS engineering with complementary equipment from leading suppliersAdvanced Automation & Control SystemsThe line integrates modern automation features typical of KHS bottling equipment, ensuring stable high-speed operation and consistent product quality. Automated lid feeding and distribution support uninterrupted seaming, while inline inspection and coding systems help maintain traceability and quality control.Automated depalletizing, conveying, and palletizing for continuous material flowRecipe-based operations and quick adjustments for format changesInline inspection for fill height and closure integrityContinuous inkjet coding for batch and date markingDynamic weight control for in-line verificationSafety guarding and interlocks across critical stationsProduction Line Integration CapabilitiesThis complete packaging machinery setup is designed for cohesive end-to-end operation, from empty can depalletizing through finished pallet wrapping. Conveyors and accumulation are matched for high-speed can handling, and the shrink packer and palletizing cell deliver strong downstream packaging performance.Inline operation with synchronized conveyors: can, pack, and pallet transportFormat change capability for 0.5L and 0.568L cansSuitable for beer production and compatible with aluminum can handling best practicesModular integration of depalletizer, filler, seamer, flash pasteurizer, inspection, shrink packer, palletizer, and wrapperMachine Condition & Maintenance HistoryThe line is in very good condition and has been regularly maintained. It is already dismantled, securely packed, and ready for shipment to reduce commissioning timelines at the new site. Availability is scheduled for Q1 2026, facilitating advance planning for capacity exp... Itjdpfx Asy Rxx Hshqog

Condition: used, Year of construction: 2018, Overview This can filling line consists of equipment from Krones, KHS, Ferrum, Kisters, Hein, Strema and additional line components. The line is designed for beverage production in cans with a nominal capacity of approximately 60,000 cans per hour. The main filling and closing section includes a KHS Innofill EMD 108S filler and a Ferrum F812 can seamer, both rated at 60,000 cans/hour. The line also includes modern inspection and handling equipment, including a Krones Checkmat from 2023, several Krones machines from 2018, and a Strema A5000BII from line covers the core process from can handling and filling through seaming, inspection, pasteurization, packaging and conveying. Several machines have been modernized or upgraded over time, making the line a combination of proven core filling technology and newer inspection, packaging and auxiliary equipment.   Technical Data Capacity: approx. 60,000 cans per hour Container type: Standard cans 500ml & 330ml Condition: used line, very good condition, well maintained Application: Beer, Carbonated soft drinks   Scope of Delivery Can Depalletizer | Krones | Pressant | Automatic can depalletizing system | 2018 Empty Can Inspection | Krones | Cantronic 709 | 2018 Can Rinser | Hein | Can rinsing system | 1978 Can Filling Machine | KHS | Innofill EMD 108S | Can filling machine for beer and carbonated soft drinks | 1997 Can Seaming Machine | Ferrum | F812 | Can seaming machine | 1997 Cap / Lid Feeding System | CSW |Lid feeding system for can seamer | year tbd Fill Height Inspection | Krones | Checkmat 731 | 2023 Tunnel Pasteurizer | KHS | Innopas | Tunnel pasteurization system | 2001 Can Dryer | Gesete | BasicLine | 2018 Fill Height Inspection | Krones | Checkmat 707 | Fill height inspection system | 2018 Tray and Shrink Packing Machine | Kisters+ZEVA | 197/60+ST/II-600V ; completely overhauled in 2015 | 1992 Grouping Station | Krones | Robobox T-GS | Product grouping station before palletizing | 2018 Palletizer | Krones | Modulpal | Automatic palletizing system | 2018 Pallet Stretcher / Wrapper | Strema | A5000BII | 2021 Pallet Labelling Machine | Logopak | 850 P3 T02 P06 | 2022 Pallet Conveyors | Krones | Pallet transport system | 2018 Tray Conveyors | Krones | Tray transport conveyors | 2018 Can Conveyors | Krones | Can conveyor system | 2002 Additional Information The tray and shrink packing machine was originally manufactured in 1992 and completely overhauled in 2015. The line combines proven core filling technology with several newer Krones handling and inspection components. Offered used, as-is, without guarantee. Isdpfx Aoy Rxtqjhqjtg

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 7,500 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2009Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000Ope... Itsdoy Rrirjpfx Ahqjg