Febalux S.A.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Podpfoz Dth Rox Apperb Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: ready for operation (used), Year of construction: 2020, total width: 865 mm, total height: 2,175 mm, overall weight: 470 kg, cutting speed: 68,000 mm/min, product length (max.): 1,335 mm, Circular Metal Saw manufactured in 2020. This Behringer VMS 370 PV features a cutting capacity of up to 130 mm for round material and 120 x 120 mm for square material. It includes a saw blade diameter of 370 mm and a hydro-pneumatic saw feed. If you are looking to get high-quality cutting capabilities, consider the Behringer VMS 370 PV machine we have for sale. Contact us for further details. • Cutting capacity at 90°: Prjdoz Dg Idopfx Appob • Round: up to 130 mm diameter • Square: up to 120 × 120 mm • Flat: up to 200 × 100 mm • Cutting capacity at 45°: • Round: up to 130 mm diameter • Square: up to 100 × 100 mm • Flat: up to 140 × 100 mm • Cutting capacity at 30°: • Round: up to 105 mm diameter • Square: up to 90 × 90 mm • Flat: up to 100 × 100 mm • Saw blade diameter: 370 mm • Motor power: 2.0 / 2.6 kW • Saw blade speeds: 17 / 34 / 68 rpm • Optional saw blade speeds: 8 / 16 / 32 / 64 rpm • Saw feed: Hydro-pneumatic • Material clamping: Pneumatic • Mitre cutting range: -45° to +45° • Additional mitre angle: 30° on one side • Coolant system: Integrated • Material support height: 900 mm

Condition: ready for operation (used), Year of construction: 2022, This 3-axis PERTICI 600TSE Circular Metal Saw was manufactured in 2022. It features a cutting length of 5100 mm and a saw blade diameter of 600 mm. The machine is equipped with a hydropneumatic feed mechanism and a double-cylinder clamping system for enhanced precision. If you are looking to get high-quality cutting capabilities, consider the PERTICI 600TSE machine we have for sale. Contact us for further details. Prsdpfx Ajzzp Nbjppob - Cutting Length: 5100 mm- Saw Blade Diameter: 600 mm- Controlled Axes: 3 controlled axes (Electronic positioning X-axis, controlled tilting angles)- Cutting Angles: Inward up to 45°, Outward up to 20° (Variable angle range 20° - 135°)- Feed Mechanism: Hydropneumatic cylinder with infinitely variable feed adjustment and rapid return, linear guide rails with recirculating ball bearings- Clamping System: Double-cylinder horizontal clamping system and vertical material clamping system for both heads- Safety System: Local pneumatic drop-down safety guards on both heads- Control Unit / Display: Industrial PC panel with 15" TFT Touchscreen monitor, USB port, Ethernet port (LAN)- Operating System: Windows Embedded- Control Features: Memory capacity up to 1000 profile data, cutting list optimization, online diagnostic assistance

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Prodpfjzzp Epsx Appsb Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: n/a, This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits Prodpfx Aezzcwxoppsb • No defects; the system was refurbished in 2024 and is in like-new condition. / scope of delivery: machine without extraction system, including technical documentation (2 copies in binders) Technical Machine Benefits • Sawing of solid material made of aluminum and aluminum alloys / sawing of profiles, tubes, and flat material / right-angled and mitre cuts up to ±45 degrees / in combination with a length stop, up to ±90 degrees / slot cutting • Rotating table for mitre and longitudinal cuts, with a rotation range of 180 degrees / rotary table adjustment: manually continuously adjustable ±90 degrees • Comes with 450 mm carbide-tipped saw blade, standard tooling, and coolant system / saw blade diameter (standard): 450 mm / kerf width (max. ): 4 mm / saw blade types: carbide-tipped saw blade (hm) / high-speed steel saw blade (hss) / saw blade mounting: mounting hole according to din 8576 • Cutting speed (with 400 mm blade diameter): two-step with v-belt: 1950 / 3900 m/min / feed speed: continuously adjustable: 0–3500 mm/min /rapid return speed: 4500 mm/min • Electrical connection power (two-step with v-belt): 3. 7 / 4. 7 kw (optional: 4. 7 / 6. 3 kw) / compressed air supply: 6–8 bar • Weight: 1480 kg / dimensions (l × w × h): 2700 × 1450 × 1900 mm • Electrically adjustable stroke limit for the saw feed / hydro-pneumatic saw blade feed, infinitely adjustable / rapid return stroke for short cycle times / large cabinet-style door for easy saw blade change, electrically interlocked / protective machine hood with large viewing windows, electrically secured / automatic minimum quantity lubrication (mql system)

Condition: ready for operation (used), Year of construction: 2017, total height: 1,900 mm, overall weight: 1,260 kg, This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Podpfxezvu Nps Appjrb Additional equipment • Pneumatic saw feed • Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders Machine Benefits Qualitative Machine Benefits • The machine ran in two shifts for approximately 3 years and in one shift for the last few years. Technical Machine Benefits • Max blade diameter: 500 mm • Swivel range: manual 45° to 90° • Cutting lengths: 3700 mm Extra Information Drive: 2 x 2.2 kW motors Unit adjustment: Motor-initiated Saw feed: Pneumatic Swivel range: 45-90°, manually adjustable Clamping device: Two horizontal clamping cylinders Control system: Prepared for the attachment of a Rapid control system Fixed center support to support the profiles Saw blades D=500 2x ball screw spindle for unit adjustment Smallest sawing dimension: approx. 310 mm Equipment: DGL-200/R600 ELEKTRONIK with ATV 32 DGL200SE VERT. CLAMP NO. M. AGAINST DGL-200E DGL200TK SHORT T. CONNECTION DGL-200RB Movable roller conveyor, width 215 mm DGL-200E CONNECTION 2.2KW Preparation for FRENIC EXTRACTION CONNECTION Socket connection for extraction up to max. 2.2 kW prepared at the factory DGL200VP - PLANK PACK. FIXED CONTROL PANEL DG1.200 Dimensions Machine Depth 5250 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,484 h, overall weight: 2,580 kg, controller manufacturer: SIEMENS, controller model: S7-300, Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details. Pjdjzt Sa Hjpfx Appsrb - Machine Type: Double Caterpillar Saw Combination- Operating Voltage: 400 V- Connection Power: 22 kW- Nominal Current: 55 A- Frequency: 50 Hz- Operating Hours: 3484 h- PLC / Control Unit: Siemens S7-300 / Dual Siemens SIMATIC HMI Touch panels- Height Adjustment: Electrical height adjustment of the entire system- Caterpillars & Saws Adjustment: Both caterpillars and saws individually adjustableCaterpillar (Haul-off) Specs:- Total Pull-Off Force: 10 kN- Pull-Off Speed: 0.1 to 10 m/min- Belt Contact Length: 1000 mm- Upper Edge Lower Cleat Min. / Adjustment Travel: 1000/150 mm- Belt Width: 100 mm- Maximum Temperature: 120°C- Upper Part Stroke: 200 mm- Center Distance: 220 mmSaw Specs:- Regulated Saw Blade Nominal Speed: 500 - 4200 rpm- Motor Power: 3 kW- Motor Voltage: 230/400 V- Max. Saw Blade Diameter: 400 mm- Max. Material Speed: 10 m/min- Saw Repeat Accuracy: +/-0.5 mm/m- Longitudinal Stroke (Extruder Direction): 900 mm- Average Working Height: 1100 mm- Adjustment Option: +/-50 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 5,000 mm, feed length X-axis: 500 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, compressed air connection: 7 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 500 mm Rotational speed: 2,800 rpm Podezqbltspfx Apporb Feed length per cycle: 5,600 mm Cutting angle: 90° Miter function depending on machine configuration MACHINE DETAILS Suitable materials: Aluminum profiles, thin-walled light metal profiles, window and door profiles Power supply: 230/400 V, 3~ Frequency: 50 Hz Compressed air connection: 7 bar EQUIPMENT Chip extraction

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular saw machine VELOX 350 VA-MPS Hydro-pneumatic fully automatic model For saw blades up to 350 mm in diameter, mitre cuts left and right 45° and bevel cuts up to 45° left. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45° left 65mm round, 60mm square, 180x50mm flat - 45° right 115mm round, 100mm square, 150x80mm flat Standard features: • State-of-the-art micro-processor control with multi-function display • Safety package with the following functions: 1. Minimum inlet pressure monitoring 2. Clamping jaw monitoring/material tension • Hydro-pneumatic control of the saw head • Pneumatic double clamping device Predpjzpxh Nofx Appob • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for fine length adjustment • Integrated coolant spray device • Connection nozzle for chip extraction system Speed 3600 min-1

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation Pjdpfszlr Rcjx Apporb • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping Pjdozi S R Ropfx Appjrb • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Prodpfsy N D Nhjx Appjb Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: ready for operation (used), Year of construction: 2005, Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details. • Saw blade diameter (vertical): 550 mm • Saw blade diameter (horizontal): 500 mm Psdpfey H Ecdox Appjrb • Maximum profile height: 250 mm • Maximum feed: 830 mm

Condition: excellent (used), Full automatic Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Misc. accessories MARCELS MASCHINEN AG Predpey H Dmnefx Appeb

Condition: ready for operation (used), Year of construction: 2007, total width: 1,070 mm, total height: 1,780 mm, overall weight: 820 kg, product length (max.): 800 mm, Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details. • Saw blade diameter: 400 mm • Saw blade types: HSS solid steel, HSS segmental • Saw blade mounting: DIN 8576 • Centering bore: 50 mm • Number of carrier bolts: 4 pcs • Bolt circle diameter: 80 mm • Diameter of carrier bolts: 13 mm • Feed speed rate: 0–1000 mm/min (infinitely variable) • Quick return: 1550 mm/min Pedpoy D Srmefx Appjrb • Rotary table adjustment: Manual, +/- 90° • Cutting speed (with 400 mm blade): 10/20, 13/26, or 15/30 m/min • Electric power equipment: 1.7 / 2.6 kW • Operating voltage: 3x 400V / 50Hz • Control voltage: 24V DC • Total current: 9 A • Main fuse: 16 A Additional equipment • Length stop T3/L 41 NC, 6 meters (Year 2013)

Condition: excellent (used), Year of construction: 2023, operating hours: 499 h, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Psdpfjyyz Txsx Appjrb Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: Prodpfx Aeyyz Ebjppjb - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. Prjdpjyyzxhefx Appob 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut Prsdpfx Asyyxxfsppeb • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: good (used), Year of construction: 2012, saw blade diameter: 250 mm, feed length X-axis: 250 mm, total length: 1,400 mm, total width: 1,200 mm, total height: 2,400 mm, rotational speed (min.): 1,400 rpm, rotational speed (max.): 5,360 rpm, overall weight: 450 kg, Equipment: rotational speed infinitely variable, High precision circular cutting machine for für Aluminium +/- 0,02 mm, full automatic, YOP 2012, blade Ø 250 mm, capacity Ø 3-65 mm, motor 2,5 KW, stroke 250 mm, SIEMENS Simatic HMI, high speed gear 1400 - 5360 rpm, oil/air lubrication, spezial jaws 2-30 mm for single/double clamping, roller conveyor 3 m adjustable, LED lamp, warning light, 10 blades, manual Predjyyl Hpopfx Appjb

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,500 h, Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details. • Feed stroke (X-axis): 520 mm (multi-stroke capable) • Saw blade diameter: Ø350 mm • Blade bore: 22 mm Predpfeyxpcrsx Appjb • Spindle speed: 3600 rpm • Control: ENC (Electronic Feed Control) for programming length and quantity • Operating hours: 5,500 Additional equipment • Extraction system • Roller conveyor for 6 m profiles

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units Pjdpfxeyv H Tio Apporb • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: ready for operation (used), Year of construction: 2009, overall weight: 2,600 kg, This 3-axis SCHÜCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 min⁻¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÜCO PDG E CUT double mitre saw we have for sale. Contact us for further details. Prjdpfx Ajyv E Edjppob • Motor speed: 2410 min⁻¹ • Max saw blade diameter: 600 mm • Motor type: M 100, 4 kW • Electrical connection: 3~ 400 V / 50 Hz / 7.7 A • machinable material: Aluminium • Height [mm]: 1870 • Depth [mm]: 2100 • Compressed air: 7 bar • Coverage: 53 • Consumption unit: NL/cycle • Locating hole: 32 mm • Control voltage type: DC • Width [mm]: 7125 • Supply voltage (machine): 400 V • Voltage type (machine): AC • Frequency (machine): 50 • Motor output: 2 x 2.2 kW • Control voltage: 24 V • Max. Cutting length: 5000 mm • Min. cutting length: 350 mm • Min. cutting length with software: 270 mm • Execution: 5 m • Angle setting: Via servo motors • Tilt angle (outside): up to 20° • Tilt angle (inside): up to 45° Additional equipment • Discharge conveyor belt (Abtransportband) • Extraction system (Absauganlage), brand: Emmegi

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm Pedpsyrhu Sofx Appjrb capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 2,800,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. • Blade diameter: 450 mm Pedpfx Apjyhfm Doperb • Blade bore: 32 mm • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments