ICL bv

Condition: excellent (used), Vötsch Shock Test Chamber Here we offer you a Vötsch shock test chamber. Water-cooled Temperature range: -80°C to +220°C Warm chamber: +50 to +220 Intermediate chamber: -10 to +90 Cold chamber: -80 to +70 Supply voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Iodpfx Adjzd Uzusrjau Rated power: 13.5 kW Refrigerant VK: R 404A 3.00 kg p*: 25 bar Refrigerant TK: R23 15 bar p*: 25 bar Condition: used Type: VT 7012 S3 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Espec We are offering an Espec (ThermoTec) stress test chamber. Overpressure and humidity tests at over 100 degrees Celsius in various modes. Program capacity for 10 samples with 30 steps per sample. A variety of safety mechanisms: overheating/overpressure protection, detection of water supply failure, complete door locking, and temperature sensor. Saturated temperature range: 105 to 142.9°C. Unsaturated temperature range: 105 to 132.9°C. Humidity range: 50 to 100% RH. Nominal pressure: 0.196 MPa at 132.9°C and 100% RH. External dimensions: Width 740 x Height 1553 x Depth 1000 mm. Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm. Other features: With rails and grid. Test item connections inside the chamber. Type: EHS-221M Scope of delivery: See images. 300 kg Condition: Used Scope of delivery: (See image) Iaedpfxjzd Uy Do Adreu (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Heating and Drying Cabinet We offer a Heraeus heating and drying cabinet here. Heraeus Heating and Drying Cabinet Up to 250°C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 250°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage: 230V, 50/60Hz Rated current: 6.8 A, Rated power: 1.50 kW Type: UT 66060 Condition: used Iasdpfxozd Uydo Adrou Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here, we offer you a Köhler salt spray chamber. Köhler salt spray chamber, corrosion testing chamber Köhler salt spray chamber HKT 500 Iasdpfxszd Ux Te Adrju Operation via touchscreen Internal dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Test chamber volume 500 l Temperature range, chamber: ambient temperature to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Active Cooling System We offer you an active cooling system here. Active Cooling System Type: EOL EMP 242 Condition: used Iajdpfxozd Uuzj Adreu Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS TV-70/530 Climate Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Machine type: Climate test chamber / Shaker chamber Test chamber volume: approx. 530 liters For sale is a used climate test chamber from CTS Clima Temperatur Systeme GmbH. The system was developed for combined temperature and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and stress tests. Note: Shaker/vibration exciter is not included in the offer. Technical data Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Iaedpfxezd Uq Ao Adrju Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Scope of supply 1x CTS TV-70/530 climate test chamber Scope of supply as shown in the pictures Condition Used Optical condition as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. Scope of supply as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), Here we offer a TIRA temperature testing chamber. TIRA temperature testing chamber, air-cooled. The chamber has the option for an external test box, including an external sensor connection, and can therefore also be used as an external temperature control unit. Iedpfx Aszd Umqodrsau Temperature range: -20°C to +140°C Temperature stability over time: ±0.1°C to ±0.3°C External dimensions: Width 860 mm x Depth 1500 mm x Height 2100 mm Test chamber dimensions: Width 601 mm x Depth 545 mm x Height 692 mm Electrical connection: 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max. 17) A Rated power: 5.2 (max. 9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Iodpfszd Umkex Adreau Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation via a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Internal dimensions W x D x H (without hood) 1080 x 675 x 580 mm External dimensions W x D x H 1940 x 900 x 1220 mm Test chamber volume 500 liters Chamber temperature Room temperature +5 – 60°C Humidifier temperature Room temperature +5 – 75°C Mains connection 230V 1P 50/60Hz 2000W Compressed air 4.5 – 8.0 bar / 3 Nm³/h Brine reservoir 140 liters Material: Stainless steel Completely overhauled and converted to a Comfort control system - Replacement of all electrical components - Replacement of all hose connections Type: HK 500 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer an LDS shaker with power amplifier and control unit. Shaker technical data: Shaker type V 875 Isdpfx Adjzd Umdsrjau Peak force SINUS 35.6 kN Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max. acceleration SINUS 1078 m/s² Max. acceleration RANDOM 735.5 m/s² (rms) Max. velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types: horizontal, vertical, any angle Excitation types: Tests with sinusoidal excitation Tests with noise-shaped excitation Tests with sine and noise-shaped excitation Tests with shock-shaped excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Type: SPA56/40K v3 V875 TC Condition: used Scope of supply: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80, water-cooled Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Isdezd Ultepfx Adrjau Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Iaodpfx Aezd Ulgsdrou Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), RMS Vibrations Testing System SW 8100/1 Manufacturer: RMS Type: SW 8100/1 Machine Type: Electro-dynamic Vibration and Shock Testing System Design: With sliding table, head expander and amplifier For sale is a used electro-dynamic vibration and shock testing system from the manufacturer RMS. The system is suitable for vibration, shock and fatigue testing in the areas of development, quality assurance, research, material testing and product testing. Technical Data Sinusoidal Force: 24 kN Random Force: 20 kN Shock Force: 28 kN Displacement: 1.5" Armature Stroke: ±22 mm Armature Diameter: 284 mm Thread: M10 Max. Acceleration: 130 g Acceleration at 60 kg payload: 30 g Frequency Range: 5 - 3000 Hz Weight Compensation: up to 500 kg Total Connected Power: approx. 35 kVA Required Cooling Water: optimally 15 °C - 20 °C Water Flow Rate: approx. 25 l/min Water Pressure: approx. 3 bar Compressed Air: 6 bar for weight compensation and center suspension Total Weight: approx. 3,500 kg Equipment Vibration Exciter SW 8100/1 Sliding Table Digital Amplifier Control Cabinet with Water Cooling Connection Box / Fuse Box Head Expander made of Magnesium Angle for Sample Mounting / Horizontal Shock Testing Water-Cooled System Head Expander / Test Table Head Expander Weight: approx. 50 kg Mounting Surface Head Expander: 800 x 700 mm Grid: 50 x 50 mm Ijdpfjzd T Rhox Adrjau Thread: M8 Angle for Sample Mounting: approx. 25 kg Mounting Surface Angle: 230 x 230 mm Thread: M8 Suitable for use in high-performance horizontal shocks Modernization / Expansion 2021 The system was expanded in 2021 to achieve higher performance levels. The water cooling system was expanded with an additional plate heat exchanger for better heat dissipation to the cooling water. The main transformer for the digital amplifier was replaced. The power was increased from 15 kW to 24 kW. The voltage was increased from 92 V to 120 V. The capacitor bank was expanded to achieve better shock performance. The weight compensation was renewed. Scope of Delivery 1x Connection Box / Fuse Box 2x Control Cabinet, Water Cooling and Amplifier, approx. 250 kg each 1x Shaker / Vibration Exciter, approx. 2,200 kg 1x Sliding Table, approx. 450 kg 1x Head Expander, approx. 50 kg 1x Angle for Test Specimen Mounting / Horizontal Shocks, approx. 25 kg Condition Used Amplifier Serviced New Main Transformer New Capacitors Capacitor Bank Enlarged Water Cooling Optimized with Additional Plate Heat Exchanger Weight Compensation Renewed Optical Condition according to Pictures Sale from our location. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), Here we offer you a Thermotron environmental test chamber. Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Iaedpezd Snrjfx Adrsu Heating time in minutes -65º to 71ºC: 17 Heating time in minutes -65º to 180ºC: 43 Heating time in minutes -40º to 85ºC: 16 Electrical requirements in full load amps 230/3/60: 19 Electrical requirements in full load amps 230/1/60: 25 Electrical requirements in full load amps 220/1/50: 27 Cooling time in minutes 85º to -40ºC: 32 Cooling time in minutes 71º to -65ºC: 54 Cooling time in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Iasdpfjzd Slksx Adreu Here, we offer a Weiss emission test chamber. Mini - SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation; scope of supply: connecting flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3-phase + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ + 18-45 Condition: used Sale from our location Scope of supply: (Only the Weiss emission test chamber WT 5.1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), LDS Shaker Special We are offering an LDS Shaker Special for sale. Shaker Vibration testing: Iedpfx Ajzd Sldjdrsau Shaker – Type V870-640T Testing for vibration and shock resistance during use and transport. Determination of vibration-related material parameters. Application areas: engine components, exhaust turbochargers, vehicle parts, electronic assemblies. Type: V870-640T Condition: used Scope of supply: (See images) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Lindner Burst Test Stand We offer a Lindner burst test stand here. AGB Burst Test Stand TMM4 Technical Data: AGB Burst Test Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Chamber temperature range: RT ... 180°C Medium temperature range: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Dimensions: Length 2150 mm x Width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuses: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required for commissioning the burst test stand: Pump, cooling tower & fire alarm control panel – these are not included. Type: AGB Burst Test Stand TMM4 Weight approx. 705 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by telephone. Iedjzd Sivjpfx Adrsau

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Here we offer a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber VTS 7033, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Heating rate: 7.5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x Depth 800 mm x Height 870 mm Housing dimensions: 1080 mm x 1710 mm x 1950 mm Iasdpfx Aezd Sf Dedreu Side openings: 12 cm and 13 cm Voltage: 400V +6/-10%, 3/N, 50Hz Rated power: 9.5 kW, Rated current: 22 A Refrigerant: R404A / R23 Approx. 570 liters, Weight: 580 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Type: VTS 7033 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), RS Simulators Iaedpfx Adszd Sfqorsu Here we offer a temperature test chamber. Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 in an empty test chamber Average heating time: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling time: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Switching time, hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW Iodpfjzd Sfdsx Adrjau Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a temperature shock testing chamber. Weiss temperature shock testing chamber, air-cooled Specification: Temperature range, warm chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Changeover time, warm/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: Ijdpfx Aezd Sd Hodreau External dimensions: height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): height 450 mm, width 500 mm, depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Iaodjzd Sdyepfx Adrsu Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climate test chamber Technical data: Nominal volume of test chamber: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width 2000 mm, height 1000 mm Viewing window, heated, 2 pieces, width 500 mm, height 600 mm Feed-through opening, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, time-dependent ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 % RH Iaedszd Sdmopfx Adrou Humidity difference, time-dependent ≤ ± 3.0 % RH Dew point range, intermittently up to -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Power plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Iajdpfx Aszd Sdgjdrsu Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. Max. workpiece weight 30 kg at a center height of 100 mm 80 kg at a center height of 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable throw: 100 mm Center height: 100 mm Measuring blades/probe and caliper: 1 mm x 5 mm Dimensions (W x D x H) Ijdpfxszd R U Do Adreau Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Type: Helio-Pan II 700 Scope of delivery: (See image) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: excellent (used), Here, we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -65°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Iasdpfx Ajzd R Uwodrou Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Type: HT 7012 S2 Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.