Habers Machine Support

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 026694, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530i, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Blodpoyg D Evofx Ac Noc Travel X-axis: 3,200 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK40 Speed: 50 – 12,000 rpm Number of tools in magazine: 30 pcs Table clamping surface: 3,900 x 750 mm Rapid traverse x/y/z: 12/12/12 m/min MACHINE DETAILS Control: Heidenhain iTNC 530i Total power requirement: 29 kW Dimensions & weight Space required: approx. 7,200 x 3,500 x 3,100 mm Machine weight: approx. 15,000 kg EQUIPMENT Chip conveyor 30-position tool changer High-pressure belt filter system Through-spindle coolant (IKZ) 15 bar SK40 tool holders Operating manual

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Bjdpfxeyf Hyge Ac Nelc Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,577 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Matec HV 30 was manufactured in 2007, featuring a Heidenhain iTNC 530 control, a new spindle installed in August 2021 with 5,577 hours, and a spindle speed of 12,000 rpm SK40. It offers X-axis travel of 3000 mm, Y-axis travel of 1000 mm, and Z-axis travel of 1100 mm. Consider the opportunity to buy this Matec HV 30 vertical machining centre. Contact us for more information about this machine. • Operating hours: 83,000 h • Total spindle hours: 32,800 h • New spindle installed: Aug 2021 → current spindle hours: 5,577 h • Material history: ~95% aluminum machining • B-axis: ±105° • C-axis: 360° • Handwheel • Tool magazine: 60 positions, SK40 • Internal coolant supply Additional equipment • Oil mist extraction • Renishaw probe Blsdpfx Aoyfunrjc Nsc Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm feed: 1 - 8000 mm/min Bjdpfx Acoyfpfxs Nelc table size: 2120 x 550 mm table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Accessories: Chip conveyor

Condition: good (used), Year of construction: 2007, Used Mazak Machining Center Bedeyfmz Dopfx Ac Nolc X-axis travel: 1,740 mm Y-axis travel: 760 mm Z-axis travel: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Including magnetic table Spindle speed: 12,000 rpm Main drive power (5 min rating): 18.5 kW Main drive power (30 min rating): 11 kW Tool changer: Number of stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent stations empty: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg Control: Mazatrol 640M Interfaces: RS232, LAN, floppy disk drive Dimensions & Weight: Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 12,000 kg Included: Various tools + Renishaw probe Documentation/manual Chip conveyor Partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar A complete, very good machine, immediately available!

Condition: ready for operation (used), Year of construction: 2006, operating hours: 7,647 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,500 W, tool weight: 10,000 g, number of axes: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006, featuring a robust vertical machining center design. It boasts a large travel range of 2300/800/850 mm and a high spindle speed up to 12,000 rpm. The machine includes a B-axis NC swivel head, a 40-position tool magazine, and supports a maximum workpiece weight of 2500 kg. Consider the opportunity to buy this HEDELIUS T8 - 2300 vertical machining center. Contact us for more information. • NC swivel head B-axis: +92° / -92° • Max pendulum operation: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5000 N, Z 9000 N • Spindle: • Max torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping (pull-in force): 12 kN • Tool magazine/changing: • Tool positions (standard): 40 • Tool positions (Magnum): 80 • Max tool diameter: 125 mm (180 mm with adjacent positions empty) • Max tool length: 330 mm • Tool change time (approx.): 3.5 s Blsdeyfiapopfx Ac Njc • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z travel vertical (L2): 850 mm • Spindle nose to swivel axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z travel horizontal (L5): 1000 mm • Spindle axis to table surface (L6): 210 mm • Y travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Hours: • Operating hours: 21,100 h • Spindle hours: 7,647 h Additional equipment • Chip conveyor • Internal coolant through spindle, 40 bar • Paper belt filter • Oil and emulsion mist separator • Rotating viewing windows (2) • Cleaning guns (2) • Renishaw touch probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully operational. Of particular note, each of the two NC tables allows fixture diameters of up to Ø1,100 mm—see drawing. Technical Data: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Operating hours: Spindle hours: Travel X-axis: 2,360 mm Travel Y-axis: 600 mm Travel Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 stations (2 chains) NC Rotary Tables (2 units) Type: SKH-NC 7/T Table diameter: Ø 630 mm Max load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: ICS 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (viewing window), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Transport and loading can be organized Europe-wide upon request and for an extra fee. Blodpfxoyfhrds Ac Njc Prices are net plus VAT. Inspection possible by appointment. Please contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,032 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Blsdpfx Acsyfhdys Njc Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Spindle power (optional): 26 kW Torque (optional): 1,067 Nm MACHINE DETAILS Control unit: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Bjdpfeyfgf Nsx Ac Nelc Travel X-axis: 3,000 mm Travel Y-axis: 630 mm Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm MACHINE DETAILS Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis

Condition: good (used), Year of construction: 2007, Pinnacle QV 209 Year of manufacture: 2007 Control: Heidenhain iTNC 530 Table dimensions: 2200 x 850 mm Table height (from floor): 920 mm Max. workpiece weight: 3,000 kg Spindle taper: MAS BT-40 Tool changer double gripper: 40 positions Max. tool weight: 15 kg Tool change time: 3 sec. Chip-to-chip time: 8 sec. X: 2,000 mm Y: 900 mm Z: 850 mm Number of T-slots: 5 T-slot spacing: 150 mm T-slot width: 18 mm Central T-slot: 18H7 Spindle motor: INTRAMAT QAN 260L Speed range: 40 to 8,000 rpm Low gear range: 40–1,700 rpm High gear range: 1,701–8,000 rpm Torque: approx. 650 Nm Repeatability: +/- 0.005 mm Bjdpfx Aoyfc N Roc Njlc

Condition: new, For sale is a spindle cover suitable for a Mazak VTC 30C. The cover is new and has never been installed. Blodeydvi Uspfx Ac Njc

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Blsdpfeyddlwsx Ac Noc Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2015, Mazak VTC 800 SR, year of manufacture 2015, Mazak Mazatrol Matrix 2 control, travel X/Y/Z 3000/800/720 mm, CNC rotary table Nicken 601 MA Ø 600 mm, 48-position tool changer, SK 40 taper, high-pressure coolant IKZ 70 bar, partition wall, 3D probe, CAD/CAM software Topsolid 7.18, table size 3,500 x 820 mm, rapid traverse X/Y/Z: 50 m/min, postprocessor. Bjdpfxsydcz Rj Ac Njlc

Condition: used, Year of construction: 2001, Technical details: x-travel: 2030 mm y-travel: 810 mm z-travel: 810 mm control: SELCA S3045PD turning speeds: 6.000 1/min tool change unit: 16 tool taper: SK 50 table-size: 2200 x 780 mm table load capacity: 2010 kg rapid traverse: 20 m/min spindle drive: 20 / 17 kW weight of the machine ca.: 11;6 t space requirements approx. LxWxH: 6,2 x 3,2 x 3 m vertical machining center, chipconveyor (backside), flat track guideways, internal coolant device, direct measuring system, Bledjych T Aepfx Ac Nec HF-spindle 27.000 1/min, exchangeable, 3D touchprobe RENISHAW MP 12, no hour meter *

Condition: used, Year of construction: 1998, Technical details: x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm table surface area: 3.600 x 650 mm max. table load: 2.800 kg control: TNC 426 HEIDENHAIN turning speeds: 6.000 1/min tool change unit: 30 Pos. taper ISO: SK 50 rapid motion - x-axis: 30 m/min rapid motion - y-axis: 30 m/min rapid traverse Z-axis: 30 m/min spindle drive: 31 / 21,5 kW total power requirement: 45 kW dimensions of the machine ca.: 5,5 x 3,4 x 3 m weight of the machine ca.: 15,5 t 3-axis vertical machining-center, prepared for 4th axis (wire and plug), internal cooling device 40 bar, Bsdsychidjpfx Ac Njlc chip conveyor, el. handwheel HR 410, 3D-touch probe, direct measuring system, dividing wall, twin table machining, flush gun, table elevation 100mm, bed flushing, coolant of spindle (oil), approx. 53.000 switch on hours, 18.500 spindle hours *

Condition: excellent (used), Year of construction: 2001, Heidenhain TNC 426 control Travel X/Y/Z: 1760/600/600 mm Blodeycc Nfspfx Ac Njc Left table dimensions: 1,350 x 600 mm Right table dimensions: 1,000 x 600 mm Spindle speed: 8,000 rpm Tool magazine for 36 tools SK40 4th axis 3D probe

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 900 mm, number of axes: 5, This 5-axis FAMU ACTIVE FIVE 3000 was manufactured in 2010. It features extensive travels of 3000 × 1200 × 900. Notably, the electrospindle and Z axis components were replaced in March 2025, and the X axis components in 2024, ensuring enhanced reliability and performance. If you are looking to get high-quality milling capabilities consider the FAMU ACTIVE FIVE 3000 machine we have for sale. Contact us for more information about this machine. Blsdpoyca I Eefx Ac Noc • Service/Upgrades: • March 2025: Electrospindle replaced; Z-axis ballscrew, guides, and linear blocks replaced • 2024: X-axis ballscrew, guides, and linear blocks replaced

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 2,135 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, table load: 2,300 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 90, number of axes: 3, This 3-axis Hurco VMX 84i was manufactured in 2018, featuring a large table area of 2185 x 865 mm and a robust table load capacity of 2.3 tons. It boasts a spindle speed of up to 12,000 rpm and a high-capacity tool magazine with 90 slots. Ideal for demanding machining tasks, consider the opportunity to buy this Hurco VMX 84i vertical machining centre. Contact us for more information. Blodjyb A R Hjpfx Ac Nec • Table area: 2185 x 865 mm Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPABILITIES Table work surface (length): 2,500 mm Table work surface (width): 820 mm Longitudinal (crosswise) X-axis travel: 2,000 mm Column (crosswise) Y-axis travel: 800 mm Spindle head (vertical movement) Z-axis: 720 mm Minimum distance from spindle nose to top of table: 140 mm Maximum distance from spindle nose to top of table: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ± 110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 min⁻¹ Minimum spindle speed (standard): 35 min⁻¹ Main spindle motor output (continuous rating): 26.0 kW FEED RATES Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between T-slot centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool storage capacity (standard): 30 Tool storage capacity (optional): 48 Tool selection: Mazatrol memory random access type Tool shank: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tools: 80 mm Max. tool diameter without adjacent tools: 130 mm Max. tool weight (with holder & taper pin): 8 kgf Max. total tool magazine weight: 150 kgf Max. tool length (from gauge line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Compressed air pressure: 0.5–0.9 MPa Compressed air capacity: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of adjusting tools Work area lighting Bsdpfx Acjya Hngj Nolc Power transformer for European market USB I/F (1 port) MANUALS, DOCUMENTATION One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) MACHINE FRAME COLOR Mazak standard color (F white / S black) SAFETY, HEALTH Global safety measures Work area door interlock with locking switch Full machine enclosure Full-cover chip and coolant protection TOOL MAGAZINE 30-position tool magazine COOLING SYSTEMS Complete cooling system HIGH PERFORMANCE/HIGH PRESSURE COOLANT Through-spindle coolant (5 bar, 71 PSI) PRODUCTION AUTOMATION SYSTEMS Automatic ON/OFF + warm-up MEASURING SYSTEMS Automatic tool length measurement & tool breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Preparation for chip conveyor (left side) NC CONTROL UNIT – 15 Functions 19" color LCD (touch screen) 3-D coordinate conversion Position sensor B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background tool path check LAN connection High smoothing control Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak thread tapping / pre-tapping Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory I/F (1 slot) + USB I/F (1 slot) Smooth standard software

Condition: excellent (used), Year of construction: 2017, MAZAK vertical machining center in excellent condition. Built in 2016, first use in april 2017. Only used for occasional and simple machining tasks > only 2500 spindle hours (!) Including: High pressure cooling through spindle (15 bar) Dividing wall (removable) Mayfran chip conveyor on left side Synchronous tapping Viewing of the machine in running condition is possible upon appointment. Availability: end of February 2026 Blsdpfsya Etuox Ac Njc Cnc control Mazatrol Matrix Nexus 2 Number of Axes 3 X-axis Travel 1740 mm Y-axis Travel 530 mm Z-axis Travel 510 mm Spindle Speed 12000 RPM Tool taper CAT Number of tool positions 30 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Documentation/manual Chip conveyor Relocation detector Bledpfx Aceya Dh Rs Nsc Automatic tool length measurement system Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: good (used), Year of construction: 2008, Ref. -No.: 10624 Manufacturer: HEDELIUS Type: RS 100 MAGNUM Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN 530i Storage location: Halberstadt Country of origin: Germany X-Travel: 3500 mm Y-Travel: 1000 mm Z-Travel: 770 mm Main spindle drive power: 55 kW Table Load: 4000 kg Max. Tool Weight: 20 kg Max. Tool Length: 330 mm Max. Tool Diameter: 125 mm Tool Taper: SK 50 Tool Piece Magazine With: 50 Pcs./pcs. Turning Speeds: 6000 RPM Blodpeya Dbkefx Ac Nec Feed Speeds X/Y/Z Axis: 30000 mm / min

Condition: used, Year of construction: 1992, travel distance X-axis: 1,800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 800 mm, controller manufacturer: UniPro NC 80 C, total height: 3,450 mm, total length: 6,100 mm, total width: 3,600 mm, table width: 710 mm, table length: 2,100 mm, table load: 800 kg, rotational speed (min.): 45 rpm, rotational speed (max.): 2,000 rpm, overall weight: 1,000 kg, spindle motor power: 26,000 W, spindle nose: SK 50, number of slots in tool magazine: 24, CNC Milling Machine, Tilting Head horizontal/vertical, Control UniPro NC 80 C, Travel X/Y/Z 1800/710/800 mm, Spindle speed 45-2000 rpm, Motor 26 KW, tool system ISO 50, Table size 710x2100 mm, table load max. 800 kg, tool changer 24 Pos., dimension 610x360x345 cm, weight ca. 10'000 kg; with chip conveyor, band filter unit, tool holders, YOP 1992 Bledpoyaq D Ejfx Ac Noc

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Model: VTC 300C-II Control: PC Fusion 640M Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Bedpfxoyanuhs Ac Nslc Tool holder: SK 40 Spindle power: 15 kW Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Can be inspected under power.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: na, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 30 positions • High-pressure through-spindle coolant: yes • Dividing wall for pendular job: yes • Chip conveyor: yes Extra Information Machine still under power Bjdpfxeyalkao Ac Nolc Technical Specification Taper Size ISO 40