Machinery Network

Year of construction: 2000, condition: excellent (used), functionality: fully functional, MEYN/BAADER 61 Knife sharpener for poultry. Manufacturer: BAADER GmbH Model: BA 61 Year of production: 2000 Technical condition: functional Condition: very good Power supply: 230 V, 50 Hz Bedpjyy Slljfx Abwowk Power: 0.27 kW Speed: 1450 rpm poultry/sharpening/cut up/MEYN/BAADER

Year of construction: 2019, condition: ready for operation (used), Automation Buchsenpresse manufactured in 2019. This EMS model features a maximum joining force of 50 kN and a joining stroke typically ranging from 100 to 300 mm. It utilizes an electromechanical servo drive for precise force and displacement control. If you are looking to get high-quality joining capabilities, consider the EMS Automation Buchsenpresse machine we have for sale. Contact us for further details. Bwodjyyyk Ajpfx Abwek • Joining stroke: typically 100–300 mm • Frame options: C-frame or gantry frame (custom design) • Guide/drive: Backlash-free linear guide, preloaded ball screw drive, electromechanical servo drive • Mounting interfaces: Customer-specific workpiece and tool holder • Joining modes: Force-controlled, displacement-controlled, combined force–displacement • Process monitoring: Force–displacement diagram (XY curve), limit curve monitoring, OK/NOK evaluation • Accuracy: Force typically ±1% of final value; displacement typically ≤0.01 mm • Operation: Touch panel (HMI) • Interfaces: Digital I/O • Sensors: Integrated strain gauge force sensor (50 kN); displacement measurement via absolute or incremental encoder on the spindle drive

Year of construction: 2015, condition: used, functionality: fully functional, The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Bjdpfx Abjyyxp Rjwswk

Condition: excellent (used), functionality: fully functional, For sale: used Tejero H-130 mandrel tube bending machine. The machine is in very good technical condition and ready for operation. A comprehensive set of tooling shown in the photos is included with the machine. Machine weight approximately 7.5 tons. Machine dimensions: 7200x2600x1600 mm. Total machine power: 20 kW. Three bending speeds. Bending tubes up to a diameter of 139.7 mm and a wall thickness of 5.6 mm. Numerous features facilitate the bending process. Bedpfoyyvhdex Abwewk

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Bwjdpfx Asyypl Nobwek

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 12,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,500 rpm, spindle diameter: 160 mm, travel distance W-axis: 1,000 mm, PEGARD PRECIRAM 4 TX CNC: SIEMENS 8401 D Bedpfx Aoyynitebwjwk 80-position tool magazine Internal spindle coolant 2 automatic orientable angle heads – Pick-up heads

Condition: excellent (used), Optimatic rsmo 090 -tensioning, leveling and back correction for bandsaws. Fully functional. Year of manufacturing 2011 Bwsdpfx Aoyym S Tjbwok Vollmer Depomatic-System ALIGATOR . Perfect working condition, 1997 , equipped with induction heater for annealing welded teeth

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Bedpfxjyyktnj Abwowk Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Piesok Guillotine Shear Bwodpfx Abjyykthewek Type NTH 3150/16 Year of manufacture: 1977 Cutting length: 3150 mm Material thickness: 16 mm Electric rear stop: 1000 mm Drive power: 26 kW Weight: 28 t Offered at a price of EUR 6,500—plus VAT, ex works location.

Year of construction: 1984, condition: ready for operation (used), Immediately available from business closure: Motorized four-roll plate bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness up to 4 mm Drive power: 1.5 HP Weight: 800 kg Price: EUR 1,750 plus VAT, ex location. Bsdoyyktbjpfx Abwowk

Condition: used, functionality: fully functional, Year of construction: 1991, working width: 3,050 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 15 mm, input voltage: 380 V, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 220 V, oil tank capacity: 650 l, We are offering this used Eisen u. Hammerwerk ISS 16-31 guillotine shear, year of manufacture 1991. Machine type: ISS 16-31 Capacity: 16 mm Working length: 3050 mm Year of manufacture: 1991 Serial number: 104849 Bsdpfsyyg Izox Abwowk Power supply: 3~ Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 64 A Main fuse rated current: 80 A Wiring diagram no.: 103-1230/7 Hydraulic oil capacity: 650 L If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, for extended medium to heavy-duty applications. With switchable power levels and mode control for a wider range of uses. • Cleans and passivates in a single operation • Can process any thickness of stainless steel • Electropolishing possible • Low operating costs • Cost-effective consumables and spare parts, saving time • Up to 10 times faster than pickling paste • No reworking required • No need for regrinding or polishing Flexible and robust • Ideal for large objects • Durable high-performance brush • Splash-proof housing • Machine does not overheat • Cable can be extended up to 12 meters • Operates at 250 watts • Can be powered by a generator Bwodpfxjyx Sq Es Abwok

Year of construction: 2006, operating hours: 1,357 h, condition: ready for operation (used), number of axes: 3, This 3-axis Rasi S 80.6 L G-V3C50 was manufactured in 2006. It can bend pipes with a diameter ranging from 4 to 82 mm and features a bending radius of 240 mm. The machine is lightly used and comes with many tools included. If you are looking to get high-quality bending capabilities, consider the Rasi S 80.6 L G-V3C50 machine we have for sale. Contact us for further details. • Pipe bending capacity: 4–82 mm diameter • Bending radius (RM): 240 mm • Nominal voltage: 400 V • Nominal current: 26 A • Condition: Lightly used Bwjdeyx Hdgopfx Abwsk Additional equipment • Included tooling set (many tools included)

Year of construction: 2013, condition: used, Make: EXTRUDEX, Year of manufacture: 2013, comprising: Granulate drying/conveying unit, Manufacturer: Koch, Model EKO300F, Year: 2013, Serial No.: 4459, microprocessor control, drying cylinder ETB1000, capacity: 1,000 l, vacuum conveyor, 2 dosing/conveying units, IFS exhaust air system, single-screw extruder, 3-part cooling section, refrigeration unit by Daikin, diameter measuring system by Zumbach, inkjet coder by VideoJet, Model 1710, microprocessor control, flame treatment unit by Hill, Model MF20-2-1, Year: 2013, caterpillar take-off by Extrudex, Model BC105, discharge conveyor belt, discharge chute, waste container, mobile, forklift pockets, peripheral devices, control cabinets, set of long part racks, 2 accessory cabinets, 2-door, industrial vacuum cleaner, workbench, 1,500 x 700 mm with base cabinet, 3 drawers. Bodpjyx Eytsfx Abwswk

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Bjdpfxsyx Exvs Abwewk

Year of construction: 2023, condition: used, Make: H2O, Model: Vacudest XS Clearcat, Year of manufacture: 2023, Max. treatment capacity: 300 m³/year, Machine control with Vacutouch touch display, 5 IBC tanks, 3 IBC drip trays, manufacturer: CHEMO, year: 2023, capacity: 1,100 l, CIP system, piping, pump, operating hours: 4,868. Bwsdpfx Aeyx Excobwsk

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Bodpfx Asyx Ev Ujbwowk

Year of construction: 2016, condition: used, Manufacturer: FELSS, Model: CBC, Year of manufacture: 2016, Serial number: 15-5164B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, Maximum tube length: 1,200 mm, 2 CNC bending heads, PC control with touch display, operator console, double-deck feeder system, loading station, robot manufacturer: Yaskawa, type YR-MA1440/MH12-A00, robot controller type DX200, teach-in terminal, small parts feeder with supply hopper, vibration feed bowl, singling station, unloading/alignment station, crate removal conveyor: length 7,000 mm, crate size 350 x 250 x 150 mm, switch/control cabinets, safety fence/Plexiglas enclosure, staging platforms/racks, label printer manufacturer: CAB, model eos 1, barcode scanner manufacturer: Zebra, model Omni tc15. Bodpfx Aboyx Euqswjwk

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Bwodoyx Etyspfx Abwsk

Year of construction: 2014, condition: used, Make: ROSENBERGER UNISON, Type: RB Breeze50, Year of manufacture: 2014, Machine No.: M1322, CNC bending head, Bending capacity Ø 50 x 4 mm (steel), Any bending planes up to total tool height of 210 mm, Bending radius 125 mm, mandrel, L 3,000 mm, PLC control, touch display, safety devices, steel cabinet, double-door, internal/external tube deburring station. Bedpfsyx Eq Esx Abwjwk

Condition: excellent (used), Professional hydraulic set from the renowned German manufacturer LUKAS Hydraulik GmbH, designed for technical rescue operations and industrial applications. Condition: - Used, fully functional and tested equipment - Shows normal signs of use - Good technical condition – ready for operation - Visible signs of wear on the housing (do not affect performance) Technical data: - Manufacturer: LUKAS Hydraulik GmbH (Germany) - Set type: hydraulic rescue set - Working pressure: up to 630 BAR - Power supply: 230V (single phase) - Standard: DIN 14751 Included in the set: - LUKAS hydraulic pump - Hydraulic cutter - Hydraulic spreader - Hydraulic hoses - Hose/cable reel - Quick couplings - Transport frame Application: - Road rescue (volunteer/professional fire departments) - Rescue and technical operations - Industrial and demolition work - Cutting and spreading of steel structures Bjdpjyxr I Defx Abwewk Advantages: - Robust German LUKAS quality - Very high operating force (up to 630 BAR) - Complete set – ready for use - Mobile design with hose reel

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Bwsdoyxr Dxspfx Abwek Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: excellent (used), I offer a professional hydraulic rescue device from the renowned company LUKAS, model LSP 44 B. The equipment is used in rescue operations (e.g., fire brigade) and is distinguished by its very high build quality and reliability. Technical condition: The device is fully functional, tested, and ready for operation. It shows normal signs of use as visible in the photographs. Bedpfoyxrbdox Abwowk Technical specifications: Manufacturer: LUKAS / FAG Kugelfischer Model: LSP 44 B Type: DSH-20-2 Power supply: 230 / 240 V Motor: Leroy Somer, approx. 1.1 kW Country of origin: Germany Set includes: Hydraulic power unit Hydraulic hoses Hose reel Working element as shown in the photographs Application: Technical rescue Fire services Emergency services Hydraulic work

Year of construction: 1999, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: Sinumerik 840D, overall weight: 12,000 kg, total width: 6,700 mm, total height: 3,000 mm, product length (max.): 7,700 mm, number of axes: 4, This 4-axis Holroyd 3EX-R CNC rotor profile milling machine was manufactured in 1999. It features a maximum workpiece diameter of approximately 300 mm and a length capacity of 1,200-1,600 mm, making it suitable for high-precision rotor and shaft machining. If you are looking to get high-quality milling capabilities, consider the Holroyd 3EX-R machine we have for sale. Contact us for further details regarding this machine. Bwsdpfx Ajyxpyqjbwok • Machine configuration and features: • Fully enclosed machine housing with mist extraction • Hydraulic tailstock for long workpieces • Prepared for automation and integration (hydraulic and electrical interfaces present) • Spindle and tool: • Main spindle: approx. 46 kW AC motor • Tool interface: HSK-100 • Tool change: manual • Working range and capacity: • Max. workpiece diameter: approx. 300 mm • Max. workpiece length: approx. 1,200–1,600 mm • Suitable for rotors and shafts with high forming and positioning accuracy • Utilities: • Electrical connection: 400 V, 3-phase, approx. 80 kVA • Condition: • Used, operational (last in production Q4 2025) • Regularly maintained; maintenance history available on request • Known point of attention: cooling system/chiller requires repair or replacement; other mechanical and electrical systems functional Additional equipment • Integrated chip/swarf conveyor • Coolant system with filtration • Chiller for cooling system (requires repair or replacement) • Available spare parts (including belts and filters)

Condition: used, Double disc press 520 t Bsdpoyxm U Ssfx Abwjwk