Flatbed truck

TATRA 41.500 8x8 Phoenix Fassi F710 Kran

Condition: new, mileage: 500 km, power: 367 kW (498.98 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Tatra Phoenix 41.500 8x8 All-Wheel Drive with Fassi Crane including Jib and Winch New vehicle with day registration 06/2025 Long-haul driver cab Removable flatbed body Can be used as a tractor unit * * Model: TATRA PHOENIX * Drive: 8X8/6, last axle driven and steered, AP axles * Engine: MX13, 390 kW (530 Hp) at 1675 rpm, 2500 Nm * 1000 - 1425 rpm range * Transmission: Automated ZF TraXon 16TX2640, 16 speeds * Steering: Left-hand drive * Cab: Sleeper cab, H3279WHTE * Gross vehicle weight: 41,500 kg * Sleeper cab * Side fenders * External sun visor (green, translucent) * Non-heated windscreen * Non-glazed side / non-glazed rear * Electrically adjustable mirrors * Convex mirrors * With curb view mirror, front * Central locking with remote control, 2 keys Cabin – interior: * Luxury Air * Storage compartment below dashboard, long * Lower sleep mattress, standard * Lower bunk raised 250 mm (sleeper cab, storage space 260 liters) * No upper bunk (long driver cab) * Trailer couplings without center section * Cool box or refrigerator (sleeper cab) * Manual aluminum roof hatch * Controls for cab climate system * Dashboard – Black Rock * Textile wall covering in driver cab * Interior trim color "DARK SAND" * Immobilizer 5-minute SCM BV03-B1 * Standard auxiliary power supply Communication and driving management: * ALPINE communication system with camera * Antennas: AM/FM + 2x GSM + GPS * Digital tachograph * With cruise control * Pre-installation for toll system (Germany only) Wheels: * Continental 385/65R22.5 HSC1 XL TL [4] (10t) +315/80R22.5 HDC1 ED TL [9], mixed operation * Spare wheel mounted on frame in transport position Powertrain: * MX13, 390 kW (530 Hp) at 1675 rpm, 2500 Nm * 1000 - 1425 rpm range * ZF 16TX2640TO TraXon, engine MX13 (355 kW, 390 kW) * 2-stage gear reduction 2.30 TRK 0.61/1.44 H8, downshift, shiftable at standstill Chassis: * Driven axle, axle load capacity 10t, small wheels * 8X8/6 Crane: Fedpfxsxb Hxmo Abrogh - Type: F710RA.2 xhe-dynamic - Continuous slewing range - All hydraulic cylinders double-acting - Piston rods hard-chromed - Double linkage system with PROLINK (articulating arm can be extended up to 10 degrees) - Electronic overload protection with FX900 - FASSI Stability Control FSC-SII incl. LMB II - Emergency stop as well as optical alarm (90% and 100%) - Pressure relief and load retaining valves - XF (Extra Fast) + XP (Extra Power) + FL (Full Lift) systems - RCH or RCS FASSI remote control with linear levers and display of - Pressure values (in bar and %) and 90% + 100% warning on display - Danfoss D900 control block with 4 control valves mounted on crane column - Emergency control for crane operation - High-pressure filter delivered pre-piped - Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base - Hydraulic outriggers, extendable on both sides, support width 8.29 m - Outriggers can be operated via radio control (black/white) - IMC (Integral Machine Control) system and ADC (Automatic Dynamic Control) = load-dependent speed control - Standard color RAL 3020 traffic red – all cylinders painted black - Load hook and fixing brackets (short/500 mm) - Transport position: folded crosswise to direction of travel - Note: Observe on-board voltage / 12V or 24V, standard is 24V - FASSI Stability Control FSC-S/II - IE742 connection box - Pre-installation for operation with variable displacement pump (LS) - Prop

Condition: new, mileage: 500 km, power: 367 kW (498.98 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Tatra Phoenix 41.500 8x8 All-wheel drive with Fassi crane, jib, and winch New vehicle with day registration 06/2025 Long-distance driver's cab Removable platform body Possible use as a tractor unit * Model: TATRA PHOENIX * Drive: 8x8/6, last axle driven and steered, AP axles * Engine: MX13, 390 kW (530 hp) at 1675 rpm, 2500 Nm * 1000–1425 rpm * Transmission: Automated ZF TraXon 16TX2640 gearbox, 16-speed * Steering: Left-hand drive * Cab: Long-distance driver's cab, H3279WHTE * Gross vehicle weight: 41,500 kg * Long-distance driver's cab * Side fenders * External sun visor (green, translucent) * Non-heated windshield * Side/rear without glazing * Electrically adjustable mirrors * Convex mirrors * With front curb mirror * Central locking with remote control, 2 keys Cab – interior: * Luxury Air * Storage compartment under dashboard console, long * Mattress lower bunk, standard * Lower bed raised 250 mm (sleeping cab, storage space 260 liters) * No upper bed (long cab) * Couplings without center section * Cool box or refrigerator (sleeping cab) Fgjdpfxexb Hwvj Abroh * Aluminum roof hatch, manual operation * Manual control for cab air conditioning * Dashboard – Black Rock * Cab wall cladding textile * Interior trim color: "DARK SAND" * 5-minute immobilizer SCM BV03-B1 * Standard accessory power supply Communication and driving management: * ALPINE communication system with camera * Antennas: AM/FM + 2x GSM + GPS * Digital tachograph * With cruise control * Toll preparation (Germany only) Rims: * Continental 385/65R22.5 HSC1 XL TL[4] (10t) + 315/80R22.5 HDC1 ED TL[9], mixed operation * Spare wheel mounted on the frame in transport position Drive unit: * MX13, 390 kW (530 hp) at 1675 rpm, 2500 Nm * 1000–1425 rpm * ZF 16TX2640TO TraXon, MX13 engine (355 kW, 390 kW) * 2-stage ratio 2.30 TRK 0.61/1.44 H8, downshifting, shiftable from standstill Chassis: * Driven axles, axle load capacity 10t, small wheels * 8x8/6 Crane: - Type: F710RA.2 xhe-dynamic - Endless slewing range - All hydraulic cylinders double-acting - Piston rods hard-chromed - Dual linkage system with PROLINK (overbending knuckle boom up to 10 degrees) - Electronic overload protection with FX900 - FASSI stability control FSC-SII including LMB II - Emergency stop function and optical alarm (90% and 100%) - Pressure relief and load-holding valves - XF system (Extra Fast), XP system (Extra Power), FL system (Full Lift) - RCH or RCS FASSI remote control with linear levers and display of - Pressure values (in bar and %) and 90% + 100% warning on the display - Danfoss D900 valve block with 4 control valves mounted on the crane pillar - Emergency control for crane operation - High-pressure filter supplied piped - Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base - Hydraulic outriggers, hydraulically extendable on both sides, support width 8.29 m - Outriggers operable by remote control (black/white) - IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control - Standard color RAL 3020 traffic red – all cylinders painted black - Load hook and mounting brackets (short / 500 mm) - Transport position: folded crosswise to direction of travel - Note: observe on-board voltage / 12V or 24V, standard 24V - FASSI stability control FSC-S/II - IE742 connection box - Prepared for operation with variable displacement pump (LS) - Prop