Ventilation system

Rippert 040 HDW-ADK

Year of construction: 2011, Condition: ready for operation (used), A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available. Uomz3Mdr8H

Condition: used, Type: ST 2500 Condition: function-tested, very good, used - integrated suction 1.5 kW - air duct 1600 m³/h - suction surface 2400 x 900 mm - 2 dust drawers Css903Lhk8

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Hardening plant 1st hardening furnace Manufacturer:RIPPERT Year of construction: 2005 - max. temperature: 250°C - Dimensions LxWxH: 3700 x 2,200 x 4870 mm - usable space: 12.0 m3 - Total power requirement: 65 kW Bse8Qfzu9By - Manufacturer:: Manufacturer: - Year of construction: 1977 - Heating medium: EL heating oil

Condition: good (used), Year of construction: 2000, Functionality: fully functional, total length: 23,000 mm, total width: 18,000 mm, Industrial paint shop with 3 paint booths and extensive conveyor technology Manufacturer of painting technology: Rippert Manufacturer of conveyor technology: Schierholz (Bremen) Year of construction: 2000 General / technical data: Offered here is a painting system with 3 painting booths, paint room storage with central supply, evaporation, drying and cooling room with an extensive overhead conveyor system. Paint booths: 1 piece approx. l=2500mm x w=2000mm x h=2000mm 2 pieces approx. L=3000mm x w=1250mm x h=2000mm Each with overhead conveyor and crane system Evaporation room approx. 45 running meters with overhead conveyor, each can be loaded from the painting booths via airlock gates, temperature approx. 30° Drying room approx. 60 running meters. Overhead conveyor connected to the drying zone Temperature approx. 35° Cooling room Approx. 15 running meters. Cooling zone with overhead conveyor connected to the drying conveyor with its own external ventilation system Heating No independent heating. The heat exchangers are integrated in the paint shop, but the heat is supplied (generated) via a central system. The external heat generation system is not included in the scope of delivery. The temperatures have been lowered to save energy and can be raised again if necessary. Conveyor technology The conveyor technology system consists of an approx. 250 m long system with approx. 110 trolley units. The system has 7 integrated crane systems, 5 loading terminals and a storage warehouse. (see attachment pictures color-coded conveyor technology) The packaging systems with the loading manipulators can be offered if required, but are not currently part of the offer. Overall dimensions Painting technology: approx. 23,000mm x 18,000mm Painting & conveyor technology: approx. 55,000mm x 22,000mm Remarks: Dpqyz9 The entire system is in good condition. The painting system is designed for use in series production. The painting system with the conveyor technology is offered ex location (Lower Saxony, greater Hameln area) for self-assembly.

Condition: used, Year of construction: 1990, Radial fan, chip extractor, fan, suction, chip fan -Centrifugal fan in a galvanized housing, soundproofing Qkwihij3A -Motor power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Connection input: Ø 800 mm -Connection output: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Year of construction: 2012, Condition: good (used), Medium pressure conveyor for wood chips approx. 4 tons per hour conveyor pipe originally 180 m 150 mm partly existing Air capacity approx. 2.350 m³/h Motor power three-phase motor according to IEC 55 kW Protection class IP54 1 Housing made of high quality grey cast iron, equipped with two dynamically balanced dynamically balanced rotary pistons, with hardened and ground, angularly toothed precision timing gears, each mounted in roller bearings. Drives by means of V-belts, with the two pulleys and the corresponding high-performance narrow V-belts as well as a protective cover. 1 drive unit with motor tensioning rails, shaft connection with easy-to-fit Taper-Lock tensioning bushes, completely mounted on a common base support. 1 combined intake-filter-silencer (absorption silencer) S82C89Wlv 1 resonance-absorption-pressure silencer, version as base unit 1 basic unit 1 pressure valve 1 non-return damper 1 elastic connection sleeve with clamps 1 pressure gauge 1 set of vibration isolators with fixing screws 1 Electrical pressure monitoring consisting of pressure transmitter and display unit as well as electrical output signal 1 acoustic enclosure made of galvanized sheet steel with oil collecting tray and ceiling painting RAL 5001, segmental construction with inner lining and forced ventilation, fan wheel driven by fan shaft. Sound hood for outdoor installation.

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: paint wall, paint booth -Motor: Ex protected -Motor power: 5.0 kW -Speed: 1455 rpm -Connection input: Ø 430 mm -Connection output: Ø 450 mm -Impeller: Ø 660 mm Tkdkzziyo -Dimensions: 1350/900/H1240 mm -Weight: 236 kg -unfortunately no further data available

Year of construction: 1983, Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h Qlwjnvdhq -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Year of construction: 1992, Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan I2Ib9Atx8 -Motor power: approx. 3 kW -Connection input: Ø 230 mm -Connection output: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Year of construction: 2000, Condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 Djbc3J -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: painting wall, painting booth -Motor: Ex protected -Motor power: 3.6 kW -Speed: 1440 rpm -Connection input: O mm -Connection output: 450 mm -Dimensions: 1260/1100 / H815 mm -Weight: 188 kg Bawmg7Tcsm

Condition: as good as new (ex-display), Wika differential pressure transmitter DPT-10 ( 21060550/040 )   Condition  DE: unused, in original packaging EN: unused, in original packaging Dqzmjd  

Condition: used, Vernier caliper, vernier caliper, vernier caliper -Manufacturer: CSE, tooth width caliper sprocket caliper with fine adjustment -Measurement scale: mm -Vernier: on both sides -Dimensions case: 175/155/H30 mm Djykqdk2 -Weight.: 0.5 kg

Condition: new, Rexroth / Indramat MDD093B-N-040-N2M-130PA1 Permanent Magnet Motor SN:MDD093-16165, unused in opened original packaging, 100% functional, scope of delivery as per photos Bdkqc2Hjk

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: Fabr.-Nr.21690522, New filling and portioning machine for fine sauces, soups and desserts. Included is: Bz33Jpvblg - mobile base frame, suction hose - hygienic design - - hose filling and portioning device - pinch valve with compressed air unit - compressed air compressor

Condition: excellent (used), Year of construction: 2008, IDEAL BAS 040 Flash butt welding machine for band saw blades Buqzmllzdm BiMetal bandsaw blades 13 to 27 mm Wood bandsaw blades 6 to 40 mm The machine is in perfect condition and fully functional.

Condition: used, Used angle head Max. Speed n= 2000 min-1 Max. Torque MT= 17Nm O0L3Fnky3X Transmission ratio i= 1/0.9 Lubrication type Oil lubrication SK 40

Condition: new, Indramat MDD065B-N-040-N2L-095GA0 Permanent magnet motor, SN:MDD65-11230 ,unused, 100% functional, scope of delivery according to photos Cj2Pa30Rlt

Condition: new, Indramat MDD065B-N-040-N2L-095GA0 Permanent magnet motor, SN:MDD65-10904 ,unused, 100% functional, scope of delivery according to photos Cj2O8G98Xk

Condition: new, Indramat MDD065B-N-040-N2L-095GA0 Permanent magnet motor, SN:MDD65-11228 ,unused, 100% functional, scope of delivery according to photos Hsrdxtn

Condition: new, Indramat MDD065B-N-040-N2L-095GA0 Permanent magnet motor, SN:MDD65-11229 ,unused, 100% functional, scope of delivery according to photos Bdfgg7Apq

Condition: ready for operation (used), Neugart WPL 70-05 angular planetary gear OP: 2 Serial number: 44529-040-09, used, good condition, 100% functional, scope of delivery as per photos Sbfk38A2Fb

Condition: ready for operation (used), Indramat TDM 1.2-30-300W0 Servo Controller SN 219099-703378-040 professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately Ibn8Xxx

Condition: ready for operation (used), Rexroth MDD071B-N-040-N2S-095GR1 3-Phase Synchronous PM-Motor MNR: R911266334 SNMDD071-17401, the motor has been overhauled by the manufacturer, used, in good condition, 100% functional, scope of delivery as per photos Cxc8Ktxg0H

Condition: new, Rexroth Indramat MDD112D-N-040-N2L-130GA0 Permanent magnet motor, SN:MDD112-20415 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bdlk7Fbue