Straw Shredding Machine

muetek MHZ 600

Condition: new, Year of construction: 2024, Consisting of bale loosener for large bales type MHB and straw shredder type MHZ 1) Bale breaker MHB: Special price from 24.975 € net Production time approx. 15 weeks Suitable for round or square bales. Including FU (frequency converter) - this regulates the speed of the scraper floor The bales are placed on the scraper floor and the tiller feed is switched on. The tines of the scraper tear the straw off the bale and throw it into the hopper. Ideally, the combination of bale breaker and straw shredder is ideal here Bale breaker technical data: Output: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of straw mill. Without a straw mill, the bale breaker can even break up to a maximum of 900 kg / h. straw) max size square bale 2400x1200x800 mm lxwxh Tiller motor 5.5 KW 380 Volt Scraper floor feed 0.75 KW 380 Volt Dimensions 3750x1730x2460 mm lxwxh Weight 400 KG 2) Straw mill MHZ 600 - 11/15 kW; available immediately Special price from 7.995 € net Special hopper: + 495 € (only in combination with bale shredder) Surcharge for the even larger straw mill (18.5 kW) + € 1,440 net Technical data mill MHZ with special hopper: Motor 15 KW 380 Volt electric motor Diameter: 600 mm Hardened cutting blades sieve with interchangeable inserts optional 10, 12,15,22,30,45 mm perforation with star delta switch Ue protection and 8 m supply cable ready to plug in Discharge nozzle 160 mm Blowing range approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm lxwxh Weight approx. 240 KG --- Options: Special dissolver extension 3 m *other dimensions would have to be calculated + 6.995 € net Cyclone (suspension by customer) *Should be a maximum of 10 m away + 970 € net Surcharge for an extraction system (demonstrator) (can also sit on the press; for transporting the chips) + from 9,990 € net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette up to a maximum of 100 kg / h from 39.700 € net Briquetting press MPP 280 S; little used demonstrator 80 mm briquette up to a maximum of 120 kg / h from 44.990 € net * larger machines on request --- Description: muetek bale loosener was developed for loosening round and square bales of hay and straw. The shredder flanged to the bale loosener shreds straw from all types of grain, hay, maize and miscanthus. The muetek machines in the MHZ / MHB series are characterized by their robust design and solid construction. This guarantees consistent quality in continuous operation. muetek bale loaders of the MHB series are equipped with a chain conveyor onto which the straw bale is placed with the front loader. The support can be adjusted depending on the type of bale. The chain conveyor presses the bale against the milling rotor and the feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The straw separated from the bale is ejected. Sieves 10-60 mm Rxqwlvgbg --- Basically, the machines work for dry raw materials: - Straw - hay --- The pulping of hemp only works with a special pulper Surcharge approx. 9,700 € net * depending on version. The shredding of hemp does not work with the straw mill. *If at all on a cutting mill

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput highly dependent on screen and source material: - up to 60 kg / h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput Motor 9.2 / 11 KW - 400 Volt, sturdy steel construction, hardened cutting blades, sieve with replaceable inserts, optional (8), (10),15,22,26,30,40,or 60 mm perforation with electric drive with star delta switch Ue protection and 8 m supply cable ready to plug in, Outlet connection 150 mm, optionally for plastic or core pipes, Blowing range approx. 12 m, Chassis with 2 running wheels Ø 380 mm, and one swivel support wheel Ø 125 mm, all wheels with solid rubber tires, Dimensions approx. 1000 x 850 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 knives, hardened € 9.90 net each Ccdlqcpak9 6 bolts € 14.90 net each 1 sieve per 475 € net Lid € 290 net each

Condition: used, Year of construction: 2021, Used machine Year of construction 2021 525 operating hours Deduster Bpzmg00J Suction nozzle diameter 350 mm Motor 11 kW, 400 V, 50 Hz Volume flow max. 8000 m³/h Nominal volumetric flow at 20 m/sec: 6950 m³/h Negative pressure at total connection at 20 m/sec: 2630 Pa Filter: 23 cartridge filters Filter surface 71 m³ H3 "GS dust-tested residual dust content < 0.1 mg/m³ Pneumatic JET filter cleaning (compressed air supply on site) Compressed air connection 3/4 inch, connection pressure 7-12 bar with 50 NL/min Operating pressure in the device 6 bar Extinguishing device with powder extinguisher, dry fire extinguisher 12 kg Frequency converter Weight approx. 865 kg with briquetting press MPP 60 Briquette diameter 50 mm Throughput capacity (depending on material) max. 60 kg/h (based on a bulk density of 200 kg/m³ Motor power 5.5 kW Oil volume 110 l Silo diameter 1000 mm Silo content; approx. 0.7 m³ Pump 27 l Hydraulic pre-compressor with cooling oil hydraulics with fill level monitoring incl. special tank for RL 350 Base area approx. 2200 x 1100 x 3100 mm availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2025, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm Bq9Ixnblmu - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: excellent (used), Catalog number 7268 TECHNICAL DATA - top loading hopper dimensions L/W 1000x600mm - bottom loading hopper dimensions L/W 650x600mm - rotor width 570mm - 15kW engine - 16x12mm sieve - knife dimensions 40x70mm - number of knives 18pcs - auto reverse - pressure drawer - 0.75kW pump engine - dimensions L/W/H 1900x1450x1450mm - weight 1040kg ADVANTAGES – German production – unpainted – very good condition Oj9Smsllpb – used chipper Original photos Movie of the machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35900 PLN Net price: 8160 EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations)

Year of construction: 2018, Condition: used, fuchs hdms polyp grab capacity: 600 liters machine class: 25 to 55 tons weight: 1745 kg neat, well-functioning grab Dqwozh completely checked and tested always large stock of grabs and other attachments if your grab is not among them, please contact us by mobile, email, whatsapp. price excluding VAT. trade-in/transport possible. we also have a workshop with various welding and turning equipment. we work with the following brands: #verachtert#lehnhoff#smp#eurosteel#GP#oilquick#steelwrist#engcon #beco#kinshoffer#hammer #knikmops#yanmar#kubota#wacker-neuson#houlotte#takeuchi#cat#boma g#atlas#sennebogen#hyundai#iseki#solis#avant#ihi#newholland #gehl#kramer#jcb#weidemann#schaffer#terex#schaeff#manitou#dieci# work ethic#jlg#caterpillar#fuchs#giant#ahlmann#hitachi#komatsu #doosan#kramer#liebherr#volvo#zettelmeyer#merlo#bobcat#snelwisse l#coupler#cw00#cw05#cw10#cw30#cw45#cw55#cw70#kniklader #mobielekraan#wielkraan#excavatorbucket#zijtveld#grabs#grabs#gre iffe r#dehaco#ACDE#vematec#hydraram#pladdet#J&B#overslaggrijper #clamshellbucket#umschlaggreifer#bennes de transbordement##earthmovingmachines #mining #loaders #excavators #frontshovel #surfaceminging #undergroundmining #miningmachinery #goldmine #coalmine #coppermine #ironoremine #diamondmine #mininglife #heavyequipment #miningequipment#recycling #recyclen #recyclage#Kinshofer#recycling#recyclen#recyclage#MultiQuickProz essoren #demolition#demolition #abbruch #démolition#demolition#demolition#abbruch#démolition#demolition #demolition #abbruch #démolition#Combimulti #recycling#recycling#recycling#polypgrab#orangepeelgrab#multiple chalengreifer#GrappinsMultiprises#orange#peel#grab#recycling #demolition#demolition#abbruch#démolition#polypgrab #orangepeelgrab #multiple chalengreifer #GrappinsMultiprises#recycling #recycling #pulverizer #Pulverizers #Pulverisierer #Croyeursfixes#Scrap shears#iron shears#scrapshear#ironshear# Scrap shearing #concrete pulverizer #concrete shear #concretecrusher #concreteshear #Crushers #betonschere #Pincesàbéton#pulverizer#Pulverizers #MultiQuickProcessors #MQP #Multishear #multishear #MultiQuickProzessoren #Combimulti#MultiQuickProcessors#MQP#Multischaar #Scrap shears #iron shears #scrapshear #ironshear #Scrottshearing #Combihydraulique#betonverpulizer#betonschaar #concreteshear#Crushers#betonschere#Pincesàbéton#Pulverisierer#B roye

Condition: new, Welding turntable KT 500, with 100 mm through-hole Horizontal load 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 700mm Height 700mm, width 800mm, length 800mm Weight 155 KG Infinitely variable electric tilt range 0 - 90° Speed 0.3 - 2.5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Thcafi2V2 Quick clamping jaw chuck Diameter 400mm, 550.-€ CE mark/approval

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 19,100 mm Number of bays / row of shelves: 10 units of 1,800 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 06 pcs. Pallet spaces per rack row: 60 pcs. Total pallet spaces: 60 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,400 kg The scope of delivery includes: 11x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P173 Dpnvah Profile dimensions: 100 x 75 x 2.00 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,000 mm high 1,050 mm deep 40x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 80 x 42 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 80x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 44x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Cgfperr8 Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Welding rotary table 600 kg load capacity, electrically swivelling immediately availableModel KT 600 / 380 V Connection AC 380V frequency control Load capacity（horizontal/vertical 600Kg/300K Rated Center Of Gravity 30Jit003 250mm Rated Eccentricity 150mm Table diameter 1000mm Speed from 0.1 to 1.2 rpm Rotation motor 370W Tilt motor 550W Mass: 1200*1100*850mm

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 2,550 mm Number of bays per row of shelves: 01 pcs. 2,400 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes: 02x pallet rack uprights, new Material color: sendzimir galvanized Material color base plates: RAL 5010 gentian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal struts, foot plates The uprights are unassembled ( bolted framework ) 2,350 mm high 800 mm deep Remark: The shelf stands are supplied unassembled. We are happy to pre-assemble the shelf uprights for a an additional charge of € 17.50 plus 19% VAT. 04x Pallet rack beams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE Odpdftk Agraffe: 5 HK (hooks) Clear width: 2,400 mm Max. load per truss pair 1,600 kg, with evenly distributed load 08x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 08x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete Push-through installation: M 12-13/95 04x shims, new Version: completely galvanized for leveling the shelf uprights that are are set up on an uneven floor 01x Load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of march 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Sigba0Id Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Welding rotary table 600 kg load capacity electrically infinitely variable swivelling and adjustable, foot remote control Power consumption AC220V 50Hz Load capacity 0° / 90 600Kg / 300Kg Table diameter 650mm Table height 675mm Speed Gthb2W Mass 650×800×675mm

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 2,550 mm Number of bays per row of shelves: 01 pcs. 2,400 mm each Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x pallet rack uprights, new Material color: sendzimir galvanized Material color base plates: RAL 5010 gentian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal struts, foot plates The uprights are unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The shelf stands are supplied unassembled. We are happy to pre-assemble the shelf uprights for a an additional charge of € 17.50 plus 19% VAT. Sanrh 08x Pallet rack traverse, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: ASM50-CES80|40|1.5 Version: Stepped beam Bracket: 5 HK (hooks) Clear width: 2,400 mm Max. load per pair of spreader beams 1,600 kg, with evenly distributed load 04x chipboard II. Choice, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated ( if necessary two-piece ) 16x locking pins, new Design: completely galvanized To secure the side rails against unintentional lifting out 08x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 04x shims, new Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2024, Demonstrator; immediately available ex works Neckartailfingen Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for demonstration cooling unit + 4,980 € net, (can also be retrofitted at a later date) * Cools the press tongs (important from 4 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 4 hours at a time. Product code: 84793010, Briquette diameter: 70 mm, Beyiwm8Wjh Front bush: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk weight, *based on a bulk weight of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling press tongs option: yes, with optional cooling press tongs Hydraulic oil cooling option: yes Cooling of the press tongs and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Briquette option; yes (depending on material) Enlarged filling slide option: yes, with special accessory Enlarged filling slide CE compliant Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Maximum chip length 20 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), clear span: 3,300 mm, Technical data for the pallet racking traverse: Racking system: SSI Schäfer Type: PR 600 The scope of delivery includes: 01x pallet racking beam, used Material color: grey INP: 120 x 60 mm Cross beam type: Head cross beam Bracket: 5 HK (hooks) Clear width: 3,300 mm Max. load per truss pair 4,000 kg, with evenly distributed load 02x safety pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation Lbew9Horyr or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) Bea9Ia3L27 - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 24,450 mm Number of bays / row of shelves: 13 units of 1,800 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 06 pcs. Pallet spaces per rack row: 78 pcs. Total pallet spaces: 78 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,400 kg The scope of delivery includes: 14x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P73 Profile dimensions: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,000 mm high 1,050 mm deep 52x pallet rack beams, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair Clkibwyqx3 2,800 kg, with evenly distributed load 104x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 56x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 28x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Year of construction: 2023, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Suitable for shredding all types of waste wood and pallet offcuts. The pallet should be prepared with the jigsaw or chainsaw so that it fits upright in the hopper - see picture 2. 40x20x20 cm would be ideal so that the wood can lie flat on the pusher floor. This is where the machine works most effectively. At the bottom of the shredder there is a hydraulic pusher which presses the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput of up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overbelt magnet at extra charge. + Powerful 18.5 kW motor, + concave knives, + large high-performance gearbox, + special, load-dependent pusher control, Product code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Knives: 15 pieces, multi-rotatable Option double row of blades + 995 € net Rotor diameter: 260 mm Control: SPS Siemens S7-1200 Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 qbm Hydraulically operated pusher Screen perforation of your choice (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm Moisture content: ᐸ 30 % Atro . Included as standard: - V-rotor for maximum throughput - Switch cabinet with Siemens PLC control - Automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idling - speed 70-90 rpm for high throughput capacity - Cycle control to avoid idling times - Performance-enhancing step control of the hydraulic slider - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE Conform. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net Jux3Pi - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Hopper adjustment + 940 € net - Eco rings: + € 1,980 net (recommended for more than 15 % hardwood) - Special scraper + 990 € net (recommended for veneer or paper) - Double row of knives + 995 € net . Requirements for the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones etc. lead to increased wear.

Condition: as good as new (ex-display), Technical data for the wide span racking traverse: Racking system: SSI Schäfer Type: WR 600 Included in delivery: 01x wide span shelf truss, II. choice Material color: RAL 5010 gentian blue B7Yj00M03M box profile: 60 x 40 x 1.25 mm Type of truss: TR4-240-064-25CEL QV71|71|3 clear width: 2.400 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, Year of construction: 2024, operating hours: 6 h, ready produced Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Bst09Lehrk Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 13,230 mm Number of bays per shelf row: 06 pcs. Number of levels plus base level: 04 pcs. Ccbpatg The scope of delivery includes: 07x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P 95 Frame profile dimensions: 90 x 75 x 2.50 mm Adjustment grid: 50 | 50 mm Bay load: 10,400 kg with buckling height 1,500 mm (with at least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 6,295 mm high 850 mm deep 48x pallet rack traverse, used Material color: grey INP profile: 80 x 42 mm Beam type: TRV1-210-08-l Bracket: 5 HK (hooks) Clear width: 2,100 mm 96x locking pin, used Version: completely galvanized For securing the side rails against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2023, Special price for trade fair machine Special price: €39,995 net Combination of: mütek briquetting press MPP 60 + suction device MMJET 350 *Approved for indoor installation *Both individual machines fully produced and in stock, they only need to be connected to each other 1. Technical data for briquetting press: Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Trade tariff number: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phases, Floor area of entire system: 2.2x1.1x 2.8 m LxWxH Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg, Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press tongs: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data for clean air extraction device MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content: ᐸ0.1 mg/m³ Max. volume flow: 8000 m³/h Nominal volume flow (20 m/s): 6950 m³/h Filter area: 71 m² Underpressure: 2630 Pa Automatic filter cleaning Cartridge filter JET cleaning Powder fire extinguisher installed (checked every 2 years by a specialist company) Requirements for the raw material: - The moisture content (atro) must be between at least 6 and a maximum of 18% - Compressed air provided by the customer - Maximum chip length 15 mm B3T3Gvt - Installation temperature: temperate room at at least +5°C - The customer must choose a press that is large enough so that it removes more material than is sucked in at peak times - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 600 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized Ckctgytdni 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 600 mm surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 600 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: new, Year of construction: 2024, Delivery time approx. 4 months . The hydraulic briquetting presses of the MPP NEM series press materials such as aluminum, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process is carried out without the addition of binding agents using hydraulic pressing pressure alone. Depending on the material, the volume of the starting material can be reduced by up to 90%. Throughput rate: up to a maximum of 80 kg/h (depending on material), Briquette diameter: Ø 50 mm, Motor: 5.5 KW, 400 Volt / 50 Hz / 3-phase, Pump: 40 liters, . Briquette length max.: 50 mm, Briquette length opt.: 40 mm, Diameter silo: 1,000 mm, Oil tank 110 liters . Dimensions: 1750x1130x1100 mm lxwxh Weight: 780 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level indicator: yes Bixvstdg . Requirements for the starting material - Max. chip length: 15 mm - Installation temperature: tempered room at a minimum of +5°C - Max. Weight on agitator: 200 kg. - The feed must be free of magnetic metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result