Mitsubishi

MITSUBISHI FB35AN

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,245 mm, fuel type: electric, mast type: triplex, construction height: 2,290 mm, fork carriage width: 1 mm, fork length: 1,200 mm, empty load weight: 5,654 kg, total length: 2,558 mm, drive type: Elektro, construction width: 1,190 mm, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New Technical condition: New Front tire type: Superelastic Front tire size: 23x10-12 Front tire condition: New Rear tire type: Superelastic Rear tire size: 18x7-8 Rear tire condition: New Battery voltage: 80V Battery capacity: 775Ah Battery type: PzS Kodpfx Aszbd Nwsgrjnb Battery condition: New Description: New unit with a manufacturer's warranty of 24 months in accordance with the manufacturer's warranty conditions. 3rd valve, 4th valve, rear work light, front work light, windshield, heater, load guard, compliant with STVZO (German Road Traffic Regulations), full cabin, full free lift, CE certificate, safety light, non-marking tires, rotating beacon, windshield wiper, seat.

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Knjdswwq Hcopfx Agrsb Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 38 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,245 mm, fuel type: electric, mast type: triplex, construction height: 2,290 mm, fork length: 1,200 mm, empty load weight: 5,654 kg, total length: 3,628 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load center: 500 Kjdpfxszrcure Agrjnb Mast type: Triplex Condition: New machine Technical condition: New Front tires size: NON MARKING Front tires condition: New Rear tires size: NON MARKING Rear tires condition: New Battery voltage: 80V Battery capacity: 775Ah Battery type: PzS Battery year: 2024 Battery condition: New Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, heater, full cabin, full free lift, CE certificate, safety light, seat,

Condition: excellent (used), Load capacity (approx.): 2 t Fork length: 770 mm Fork spacing: 105 mm Fork width (external): 400 mm Knedsd D U Uaepfx Agrob Overall length: 1100 mm

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. Kodpfx Agsikivmjronb The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, 1 brand new hydraulic oscillating shear Manufacturer: LAMI NOVA / Exclusive dealership! Model: SC 4006 Max. cutting length: 4100 mm Max. sheet thickness, for normal steel: 6 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting rate: 14 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 4630 x 2050 x 1700 mm Weight: 9600 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning indicator for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal plates • Central cutting gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the hold-down device • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Knedpjd Ad Dbefx Agrjb Fig.: with option! Delivery time: approx. 3 months after order receipt plus pre-carriage costs China - Germany Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,518 h, load capacity: 2,500 kg, lifting height: 4,440 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Knedoradizjpfx Agrsb Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 620Ah Battery year of construction: 2017 Description: Sideshift, 3rd valve, rear working lights, front working lights, semi-cab, STVZO, LED,

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 8500messurements (LxWxH): 4650 x 1700 x 1800 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Kjdpfx Ajd Ab Hhjgrsnb Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, max. cutting length 4000 mm max. sheet thickness, for normal steel 12 mm Knjdpfx Aegiud Ujgrob max. sheet thickness, for stainless steel 8 mm cutting angle 1.5° overhang 350 mm cutting speed 12 / min drive power 18.5 kW dimensions without support arms and rear safety guard L x W x H approx. 4765 x 2000 x 2370 mm weight approx. 13,300 kg Accessories / Special features: • Electronic positioning display ELGO P 40 for the motorized back gauge o Length approx. 800 mm o Ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal panels • Central cutting gap adjustment • Cutting line illumination • Flat, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the hold-down • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical components SCHNEIDER, SIEMENS, TELEMECANIQUE • Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE compliant Delivery time: approx. 2-3 months after order receipt plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 9,976 h, load capacity: 2,000 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,055 mm, power: 6 kW (8.16 HP), fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 3,680 kg, total length: 1,988 mm, drive type: Elektro, construction width: 1,152 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Knedozx Ixpjpfx Agrjb Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Speed class: 15 Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Geraer Batteriedienst Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Side shifter, 3rd hydraulic valve, rear work light, front work light, full free lift, CE certificate, non-marking tires, interior mirror, seat heating, LED, 3-wheel, seat, Lift mast cylinder completely filled with oil, LED rear combination light, panoramic mirror, blue LED warning light, display of load weight, overload alarm setting, display of mast inclination, clipboard A4, I_Site fleet management including shock sensor and pre-operational check, Smart-Access, retention system HSH-E-8FB-90-48KASII, automatic parking brake.