Tractor

Massey Ferguson MF 6465

Condition: used, Year of construction: 2017, working width 4 m Ledpjyv Iu Uefx Aphshl Number of gangs . 0 Number of folders 2 0 Number of rollers 1 St.

Condition: excellent (used), Corner jointing machine, Pressta 4000 Lsdpfx Apel Skl Dshjhl Shipping within the EU: approx. €350

Condition: new, Year of construction: 2026, CORMAK LUP7T WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well-suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation system, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7T if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7T wood splitter The CORMAK LUP7T wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7T model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7T is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for use at home, on a farm, or in a small service point. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage compared to stand-mounted versions The CORMAK LUP7T is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover over the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Technical parameters of CORMAK LUP7T: Splitting force: max. 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: mains Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: not included Standard equipment CORMAK LUP7T hydraulic wood splitter Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Stable splitting blade 230 V / 2200 W motor Ledpfx Apszarp Nshohl Powder-coated steel construction

Year of construction: 2016, condition: used, Manufacturer: Emmegi S.p.A. Machine: PVC Corner Cleaning Machine Model: Trimmer E Year of manufacture: 2016 CNC corner cleaning machine for PVC frame corners, with 3 interpolated axes and automatic cycle. It is equipped with a 300 mm diameter blade that allows, through different machining programs, the cleaning of the external corner of various profiles. Weight: 600 kg Air pressure: 6 – 7 bar Lodpeywu A Iefx Aphjhl Motor: E48 63/2 Speed: 2850 1/min Power: 3.5 kW Current: 6 A Power supply: 400/3 V Frequency: 50 Hz

Condition: used, Year of construction: 2023, operating hours: 1,007 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, Tire size (rear): 710/70 R42, Operating hours: 1007, First registration: 19.12.2024_____Price: 199,000.00 Euro net. First registration: 19.12.2024, Operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/hp (ISO 14396), Max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with pre-cleaning for coarse dirt, EasyCare radiator package, Additional fuel pre-filter with water separator, 500-liter fuel tank. Lhjdpfx Apow E N Tdehsl

Condition: used, Year of construction: 2021, front tire size: 600/65R28, rear tire size: 710/70R38, Equipment: compressed air brake,

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Lhjdpfx Apozpcvdohsl Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 159,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle Ledpfx Apjvhqbcshshl * First owner * Condition, see photos * Original: only 8,682 operating hours * Front and rear PTO * Municipal hydraulics at the front and rear * Front mower * Mulag boom MRS300 * Mulag verge mowing head RMK1200 * Rear mower * Mulag rear boom MHS800 * with Mulag mowing head MK1200 * Municipal and rear hydraulics * Rear linkage * Mulag verge mowing unit MRS 300 * Ideal for mowing in areas near roads, operating on the left and right sides * 3-point attachment to the front linkage * Reach up to 3.00 m * Drive via front PTO * Control: electro-hydraulic * Mowing head relief * Distance-dependent feeler automation * Verge mowing head RMK 1200 * Working width 1,200 mm * Telescopic rear boom mowing unit MHS 800 * Lateral displacement 1,600 mm * Reach, left and right 8.70 m * Automatic ground sensing * High portal for driving over obstacles up to 3.90 m * One-hand control panel with multi-function lever * Quick-change device * Mulag flail mowing head MK 1200 * Overall width 1,580 mm * Boom utilization * Comfortable cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfortable driver's suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * All-round warning lights * Wide-angle warning beacons * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Top speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg * LOF approval * In the event of a sale to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that no false impressions arise regarding their condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicle. Subject to change, prior sale and errors.

Condition: used, Year of construction: 2009, front tire size: 600/70R34, rear tire size: 710/75R42, Equipment: compressed air brake, Wheel weights 4x300 kg Gearbox at 8164 Bh NEW / Lhedpfx Ast Hrrpjphol

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Sturtz fully automatic welding (2 machines x 4 head) and double head corner cleaning line Lodpfjvkdubjx Aphehl - 1 x welder VSM40/26 - 1 x welder VSM30/26 - 1 x handling with verticat transport system - 1 x tilting table - 1 x 2 head corner cleaner with drilling head's - 1 x outfeed table adjusted for Rehau Brillant/Euro70, Synego and Geneo the line is still in production, can be inspected in working conditions fully functional, very good conditions