Bridge Crane 5t, Demag Bridge Crane 5t

Mannesmann DEMAG

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Pedpfx Aeby Hpbef Togi Space requirement: 820 x 950 x 1200 mm high Weight: 360 kg Air vessel, make KAESER, year of construction 1999 Capacity: 1000 l max. operating pressure: 11 bar Space requirement: 800 Ø x 2300 mm high

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Podpfsqakhuox Af Tsgi Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: repair required (used), functionality: fully functional, Demag T12 / KBA125 / FG08 / KBA80 Psdpfxoywk Erj Af Tsgi New! T12 i = 24.8 KBA125 B-4 FG08 i = 9.87 KBA80 A-4 Price on request

Condition: used, Year of construction: 1994, functionality: fully functional, power: 0.75 kW (1.02 HP), protection type (IP code): IP55, We offer this used Mannesmann Demag 500-K-V1 Big Bag Discharging Station, year of manufacture 1994. Permissible load capacity: 0.5 t Year of manufacture: 1994 Hook lift: 10 m Chain dimensions: 5.8 x 15.2 mm Pgedpfsyv Uz Ujx Af Toi Chain group: 10 H Lifting speed under load: 8 m/min Lifting speed unloaded: 4 m/min Rated motor power: 0.75 kW Rated current: 2.3 A Rated motor speed: 2680 rpm Protection class: IP55 If you have any questions or require further information, please send us a message or call us.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN7088302, For sale Used Demag single girder overhead crane ± 11,365 mm x 5,000 kg We can optionally supply the cranes including: * adjust in length * Assembly and inspection * conductor rails * radio control Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. Psdpfx Ajv Ipr Hsf Tegi * overhead cranes * hanging cranes * jib cranes * KBK installations * boat lifts All our new and used cranes that we supply (within NL and BE) are supplied including warranty! In addition, we have our own stock of approx. 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. keywords: Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, bruckenkrane, workstation crane, lagerkrane, hebezeuge, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Enke

Condition: excellent (used), For sale: professional pneumatic turbine GTV 1000 from the renowned brand Mannesmann Demag – original, fully functional, and in excellent condition. - Technical specifications: • Rotational speed: 100,000 rpm • Power supply: compressed air (approx. 6 bar) Podpjw Rd I Esfx Af Tsgi • Air consumption: approx. 318 l/min • Spindle diameter: 30 mm • Total length: approx. 120 mm • Weight: only 210 g • Collet: 3 mm • Oil-free version – clean operation without lubrication - Why choose this? • Extremely lightweight and compact – ideal for continuous operation • German quality – precise bearings, no vibration • Perfect for deburring, micro-milling, and robotics applications • Oil-free – cleaner operation and reduced material wear

Condition: used, Year of construction: 1995, functionality: fully functional, total width: 900 mm, total length: 1,300 mm, shelf height: 900 mm, total height: 900 mm, load capacity: 1,000 kg, Automatic pallet racking system by Mannesmann Demag Fördertechnik AG Solomat 1010 from 1995 with upgraded Siemens Semiautomatic SIMATIC HMI control from 2024. Travel speed: 115 m/min Lifting speed: 23 m/min Extension speed: 87/50 m/min Podpfjykz Dksx Af Tjgi

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Pgsdpfoqa Dv Tjx Af Tji Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Podpfx Afsygikwj Togi Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 20,000 kg, number of seats: 1, first registration: 01/1992, Year of construction: 1992, machine/vehicle number: 20412, Equipment: additional headlights, cabin, parking heater, We offer this used Mannesmann Demag V 73 mobile crane, year of manufacture 1992. Pgjdpfx Aeyi D Ddsf Tsi Type: V 73 Chassis number: 20 412 Year of first commissioning: 1992 Permissible total weight: 20,000 kg Permissible front axle load: 10,000 kg Maximum lifting capacity: 14 t Maximum outreach: 13 m Last inspection: 2023 The load moment limiter is not operational. If you have any questions or require further information, please feel free to send us a message.

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures GDR3 H12 Pgedpjvylhbefx Af Tei Motor ZBR100 B4 B050

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos Pedpfxjn Hbc Io Af Tjgi -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg Pgodpjn Hbckjfx Af Tji

Condition: ready for operation (used), Specification: Overall length – 12.4 m Belt width – 60 cm Large selection of conveyor belts on site Please feel free to contact me Possibility of transport. Podpfjwtfm Nox Af Togi

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from injection molding machine Demag D 100-275 NC -Type: QVA 30/1 Item No.: 2442/00 Pedjn Hbcyspfx Af Tjgi -Quantity: 2x amplifiers available -Price per piece -Total dimensions: 100/40/H110 mm -Weight: 0.3 kg/pc.