Used Separation Column for sale (10,756)

Condition: ready for operation (used), An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible. Nsdpfx Ahoxnbrze Socu

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Ncodek Eakvepfx Ah Seu Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A Ncedpfxelatz De Ah Seu - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: used, Item: A-2600-UF-Microfiltration-Block Nsdpfx Ahskyu Ave Secu UF- /Microfiltration Block (Alcalase) 4 X 38-42 m2 DOW Separation Systems inclusive pumps, tubes and other accessories. To offer 6 pieces identical

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Nodpfxsvq N Due Ah Sjcu

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Ncjdpfszg Dq Dsx Ah Ssu Control system: HEIDENHAIN iTNC530 Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Nedpfjzdtxfex Ah Sjcu Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Ncsdpfslkc I Rsx Ah Sju

Condition: excellent (used), GEA Westfalia separator for dewatering industrial and municipal waste water sludge. In excellent condition. Nodpfx Aheyf Hw Se Socu

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW Ncedpfxsx Td Ile Ah Sou -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m machine is in an excellent condition!! with div. acessories (photos available) Ncsdpeu Sbdgsfx Ah Seu machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Condition: used, Year of construction: 2019, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, position of the milling head: 2,5° x 2.5°, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,000 rpm, torque: 1,638 Nm, coolant supply: 16 bar, Equipment: documentation/manual, rotational speed infinitely variable, On behalf of our client: Used CNC fixed-bed milling machine Manufacturer: KIHEUNG Model: D-TRAX X5500 Year of manufacture: 2019 Operating hours: • Control system on: 12,578 hours • Program run: 6,742 hours • Spindle run: 4,869 hours STANDARD EQUIPMENT: • CNC control HEIDENHAIN TNC 640 with HSCI, 19" TFT monitor, DXF converter, and swiveling control panel • SIEMENS main spindle motor 28/38 kW • 2-stage, cooled ZF reduction gearbox (1–1,000 / 1,001–4,000 rpm) Nodpfjzgw Dwsx Ah Sscu • X-axis drive via TWIN-DRIVE / REDEX rack and pinion system with two servo motors • Y and Z-axis drive via KORTA precision ball screws • HEIDENHAIN linear scales in all three axes with compressed air system DA 400 • INA precision linear guides in all three axes • Hydraulic counterbalance of the Z-axis using nitrogen pressure cylinders • Automatic central lubrication with pressure monitoring • Telescopic guide covers for X, Y, and Z axes • HEIDENHAIN Teleservice dongle for remote diagnostics • HEIDENHAIN handwheel HR-510 • RITTAL control cabinet with air conditioning and interior lighting • CE-compliant complete enclosure with 15 mm polycarbonate safety glass and four front doors • Rear articulated chip conveyor • Coolant system up to max. 8 bar, tank volume 800 l • Ethernet interface • Paint finish in light gray RAL 7035, carmine red RAL 3002, and slate gray RAL 7015 SPECIAL ACCESSORIES: • Universal automatic milling head A4 – 2.5° x 2.5° (bi-rotating, hydraulic clamping) • Horizontal chain-type tool changer for 30 tools (servo motor with HEIDENHAIN encoder) • CTS system 16 bar – cooling through the spindle with paper band filter system • Oil skimmer HAMMA Germany • Magnetic separator • Stand extension for Z-axis travel of 2,000 mm • Preparation for pendulum machining DELIVERY SCOPE / DOCUMENTS • Machine including all existing options and accessories • Available documentation: operating manual, maintenance manual, lubrication manual, electrical wiring diagrams, CE declaration of conformity, and programming manual INSPECTION / CONTACT • Inspection possible by appointment

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm Nsdpjy Nd Svofx Ah Socu total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm Nedpfoy Nd Spox Ah Sscu ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec Ncsdpfx Aheyif Nre Seu rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 2022, x-travel 5.230 mm y-travel 2.750 mm z-travel 1.100 mm control Heidenhain TNC 640 Tool bore DIN69871 A50 BIG PLUS main drive 32/43 kW torque S1/S6-60% 752/1.011 Nm speeds Spindel stufenlos 6.000 U/min ca. 70 kw weight of the machine ca. ca. 43 t Nsdpfszgxgmjx Ah Socu Installation dimensions (length x width x height) ca. 12,2 x 5,7 x 5,1 m

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Nsdpfxexlqxfe Ah Sscu Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN CM 6 Traveling Column Milling Machine – available for short-term delivery The LAGUN CM 6 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-part production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for the operating personnel included Ncsdpfx Aovrv Suoh Seu ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of milling machines. The machines impress with their reliability, ease of maintenance, and economical operation. Technical equipment: Control: Two HEIDENHAIN TNC 7 digital path controls – one on the front of the machine and one at the rear in the cabin 2 x HEIDENHAIN TFT screens 19" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: Automatic tool changer (ATC), 60-position Chip disposal: Hinged belt conveyor Preparation: Preparation for rotary table / 4th axis Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast availability of spare parts ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer.

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Ncsdpey Ih Tzefx Ah Ssu Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Nodpjrx Rtrefx Ah Socu Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: refurbished (used), Manufacturer: Steinert Type: UMS 45 70 80/61 3,1 kW / 51 A. / 61 V. 100% ED Magnet L x W: 806 x 750mm. Ncsdpfx Ajwvaideh Sju Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Condition: new, spindle mount: MK 4, total width: 1,020 mm, total length: 610 mm, total height: 2,450 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, clearance between the columns: 375 mm, mount diameter: 50 mm, quill stroke: 230 mm, Column Drill Ncodpszdq Tmefx Ah Ssu Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total width: 930 mm, total length: 560 mm, total height: 2,220 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, clearance between the columns: 350 mm, mount diameter: 40 mm, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Ncsdpfjzdq S Nex Ah Seu Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total width: 930 mm, total length: 560 mm, total height: 2,220 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, drilling capacity: 40 mm, quill stroke: 180 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Nedpfx Ahezdq Svs Sjcu

Condition: used, SAF Column and Boom approx 8 m high column and 8m boom. with Nertamatic 450 Conrol. Ncsdpfx Ahozgxg He Seu