Used Roller Center Punch With Interchangeable Inserts for sale (24,694)

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D Dsdswc Nyxspfx An Hsuu As New Condition

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Dujdpfxouzv Tzo An Hsu Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Perfecta BSB 3L Paper Jogger with Roller The machine is 100% functional and in perfect condition. Dujdsy Sd T Eopfx An Hsu This is the latest design from a German manufacturer. Year of manufacture: 2016. Technical specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table with micro-perforation Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable force and speed of the air squeezing roller. Chrome-plated table surface Full documentation set.

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Dusdpfxek Aa Rrj An Heu Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1995, Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Type: TS 2712 Year of construction: 1995 Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Duodjk Aa N Aopfx An Hju Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2012, TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Duodpsk Aa Nqofx An Hou Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2008, Transnorm Roller Alignment Centering Conveyor 2500-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 700 mm Length: 2500 mm Roller diameter: 50 mm Roller distance:76 mm Drive motor: R17DT71D4/TH Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. Duodpfxjn R Uawo An Heu We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): Djdey Ui Rnepfx An Hsuu machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, The machine's control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for blanks with tensile strength 400 N/mm² max.: 3.5 mm Minimum sheet thickness: 0.5 mm Punch head force max.: 40 presses with max. force 7 t & 4 presses with max. force 26 t Lower cylinder force max.: 6 t Double punch force: 12 t (2 hydraulic punches) Minimum input table length: 370 mm Maximum input table length: 3,048 mm Minimum input table width: 300 mm Maximum input table width: 1,524 mm Maximum input table diagonal: 3,408 mm Minimum output table length: 250 mm Maximum output table length: 3,048 mm Minimum output table width: 60 mm Maximum output table width: 1,524 mm Vertical stroke of scissor lift table: 550 mm Usable load capacity of scissor lift table: 5,000 kg Minimum size of transportable sheet stacks: 300 x 100 mm MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller conveyor PRL3814F Universal destacking device DUF15 Punch head H2 Hydraulic power unit C1515 (3-unit pump system) Lower cylinder EI09 Double rotary punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 MHz Dujdpfsy Emr Dex An Hju WINDOWS NT Documentation

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Dujdpfx Asx U Eiasn Hju Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 Duodpohlnzkofx An Heu - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: good (used), Centering feed with toothed chain and 2 pressure rollers from above. Hydraulic / Pneumatic. Pressure rollers driven by oil motors. Adjustable centering rollers. As infeed for resaw / multirip saw etc. Dodpfx Aenqzuysn Hjuu

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment Dedpfx Asxb Ucasn Heuu - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale Dusdpfjwt Sqhsx An Hou The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Center support can only be adjusted manually. Djdpfxoxlqnys An Hjuu Machine location is EU. Ask for additional information!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, product height (max.): 60 mm, product height (min.): 12 mm, product length (max.): 3,200 mm, product length (min.): 240 mm, product width (max.): 800 mm, product width (min.): 140 mm, TECHNICAL DETAILS Components: ESSE2 cross-loader: automatic BIESSE FTT: with 4 heads, drilling and milling, automatic tool change Tilter: available BIESSE FTT: with 2 heads, drilling and milling, automatic tool change BIESSE FHT: horizontal drilling and dowel insertion ESSE2 cross-unloader: automatic Panel dimensions Panel length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Panel width: 140 - 800 mm Panel thickness: 12 - 60 mm Drilling units FTT 1 drilling heads: 4 FTT 2 drilling heads: 2 Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Dedpfx Aswmcxijn Hsuu Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Turret cartridges: 2 Positions per cartridge: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B Milling spindles Electric spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-station tool change rack Electric spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-station tool change rack Lateral positioning units Workstations: 2 for parallel machining of identical or mirror-image panels Left positioning element: fixed to the lateral reference Right positioning element: movable in the X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X-length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross-feed, single drive Unloading system: 1 belt conveyor with cross-feed, single drive Additional features: Cleaning fan in the unloading area Safety features Standards: CE-compliant Safety equipment: Extensive protective enclosures

Condition: new, Year of construction: 2025, ABB IRB1200-7/0.9 NEW!!With Omnicore C30 controller 09.2025 ABB warranty untill have 2 robots on stock. DEVELOPMENT OF GSG ROBOTICS Dedpfexq Tugjx An Hsuu GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 285 kg, load capacity: 6 kg, arm reach: 1,915 mm, pivoting range: 360 °, controller manufacturer: Yaskawa Motoman, controller model: NX100, input voltage: 400 V, type of input current: three-phase, For sale in excellent condition industrial robot Yaskawa Motoman YR-HP20 6-axis robot with NX100 controller robot model: Motoman YR-HP20-B10 Stable design, 285 kg, 6 kg load capacity and 1915 mm arm reach. The rotation range is 360°, making it versatile for various work processes Robot, control unit, cable, teaching panel, operating instructions robot: Yaskawa Motoman YR-HP20-B10 year of manufacture: 2008.08 load capacity: 6kg repeatability: 0.06 mm Serial number: SBM254-1-3 controller: MOTOMAN NX100 ERCS-HP20-AE00 year of manufacture: 2009.02 voltage: 400v 50Hz Robot Range of movement: J1: ±180° J2: +155° - 110° J3: +255° - 165° J4: ±200° J5: +230° - 150° Duedpeyhxc Ajfx An Hsu J6: ±360° Speed ​​of movement: J1: 170 °/s (2.97 rad/s) J2: 170 °/s (2.97 rad/s) J3: 175 °/s (3.05 rad/s) J4: 355 °/s (6.2 rad/s) J5: 345 °/s (6.02 rad/s) J6: 525 °/s (9.16 rad/s)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, FANUC S-420iF industrial robot available due to production reconfiguration and automation upgrade in automotive manufacturing environment. Previously used in high-volume automotive production for a leading Tier 1 automotive customer. The robot is offered in complete condition and has been operating in an industrial production environment. Key information: • Manufacturer: FANUC • Model: S-420iF • Controller: RJ-2 Duodpjy S A T Refx An Hou • Condition: Used / industrial environment • Origin: Automotive manufacturing • Complete unit available • Spare parts available for this model Selected robots remain in active production and can be inspected under power until August 2026. Ideal for: • Automation retrofits • Material handling • Heavy industrial applications • Spare parts or refurbishment projects

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Number of axis: 6 Payload: 5 kg Dusdjv Hdk Iepfx An Hsu

Condition: used, REF: MM6436 Dusdpfoza T I Hjx An Hsu Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD Duodpfxecqxv To An Hsu 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Duodpjw A Nnpefx An Hju

Condition: like new (used), Year of construction: 2015, functionality: fully functional, roll diameter: 75 mm, total width: 1,000 mm, conveying length: 3,500 mm, Roller track 1000x3525mm roller line, transport track several pieces /ct1967 Manufacturer: BUDDE Fördertechnik Dusdoubahgepfx An Heu Length: 3525 mm Width: 1000 mm Height: 250 mm Roller: 990 mm Wheel center distance: 75 mm Can be sorted, several pieces for sale

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. Dsdsymn Hwopfx An Hsuu We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.