Used Parvalux 12./174778/4H for sale (21,275)

Condition: used, DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Speed: 40 rpm -Power: 0.19 kW -Construction: angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 Iodpfx Adjci Ahue Ejar -Number: 2x motors available -Price: per piece -Dimensions: 310/150/H160 mm -Weight: 10 kg

Condition: used, Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1405 rpm -Shaft: Ø 28 mm -Design: B3 -with extra cooling fan -Protection class: IP 55 -Dimensions: 410/260/H195mm -Weight: 20kg Isdpfoct Er Tox Ad Esar

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Iedpfx Aeytr Rmed Esar Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Treif Breadslicer 10/12/14MM Iajdpoumphbjfx Ad Esr

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit Isdpfx Adjy Atwbe Ejar All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: Iaodpfx Adoy A H Hce Ejr - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Isdpfx Asw R E Hved Eoar

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Ijdoyxtabjpfx Ad Ejar Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Manufacturer: LUKAS (Germany) Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Applications: Fire brigades (voluntary and state) Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications.

Condition: used, FANUC A06B-6124-H205 Servo Drive Amplifer Iaedpfx Adjyn Sbbe Eer Condition: Used (functional) incl. 7-day functional warranty

Condition: used, FANUC Servo Amplifier Module Type: A06B-6124-H205 Iaedpfeyn Sa Dex Ad Eor Condition: used (functional)

Condition: used, FANUC A06B-6124-H109 Servo Amplifier Module Iaedpfsyn Saqjx Ad Esr Welcome to the Fanuc A06B-6124-H109 servo amplifier, a masterpiece of precision and performance. This servo amplifier is the ideal solution for industrial applications that demand the highest levels of accuracy and reliability. Developed by Fanuc, a global leader in CNC control technology, the A06B-6120-H075 stands for quality and innovation. With its impressive power output and robust design, this servo amplifier is perfectly suited to meet the most demanding requirements of modern manufacturing environments. Its precise control and fast response times ensure outstanding performance across a range of applications, from machine tool control to robotics. Experience the unmatched precision and reliability of the Fanuc A06B-6120-H075 servo amplifier and take your industrial applications to a new level of performance.

Condition: used, FANUC A06B-6124-H109 Servo Amplifier Module Welcome to the Fanuc A06B-6124-H109 Servo Amplifier, a masterpiece of precision and performance. This servo amplifier is the ideal solution for industrial applications that require maximum accuracy and reliability. Developed by Fanuc, a global leader in CNC control technology, the A06B-6124-H109 stands for quality and innovation. With its impressive power and robust design, this servo amplifier is perfectly suited to meet the most demanding requirements of modern manufacturing environments. Its precise control and rapid response times ensure outstanding performance in various applications, from machine tool control to robotics. Discover the unparalleled precision and reliability of the Fanuc A06B-6124-H109 Servo Amplifier and take your industrial applications to a new level of performance. Iasdpfx Adsyn Sadj Esr

Condition: used, FANUC A06B-6124-H109 SERVO AMPLIFIER MODULE Condition: Used (functional) incl. 7-day functional warranty Iedpfx Adeyn R Sls Eear

Condition: used, FANUC Servo Amplifier Module Type: A06B-6124-H105 Condition: used (functional) Iodpfsyn R N Rox Ad Eoar

Condition: used, mileage: 398,000 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2021, Equipment: ABS, EBS, air conditioning, - Brake system For inquiries about the vehicle, Mr. Seidel is at your service (by phone). Iodpfx Asyw E D Asd Esar Mercedes-Benz Arocs 2551 L 6x2/4-4 Timber Truck Crane: Cranab TZ12.2, high seat, A1D front axle 8.0 t, A1H Hydraulic Auxiliary Drive (HAD), A1Y front axle, straight version, A2G rear axle, crown wheel 300, planetary, 13.4 t, A4T trailing axle, 8 t, steered, relieved, liftable, A5P axle ratio i = 3.714, B1B Electronic braking system with ABS and ASR, B1D Electronic air supply unit, medium, B1F Heating, electronic air supply unit, B2A disc brakes, on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for air system, B4M air tank, steel, B5A trailer brake, 2-line, brake connectors left, C2R wheelbase 4800 mm, C4L frame overhang 2550 mm, C6J power steering pump, non-regulated, C6Q stabilizer front axle, C6U additional stabilizer rear/trailing axle, C7A rear underride guard (ECE), C7F front underride protection (ECE), aluminum, C8F mudguards for chassis transfer, C8I spray protection (EC), front, CLW power steering oil cooling, D0S compressed air connection in cab, D1C driver's air-suspended comfort seat, D1N co-driver functional seat, D2N seatback release driver's seat, D2W armrests both sides, co-driver seat, D3B comfort bed lower, D3Q seat cover velour driver's seat, D3T seat cover velour co-driver/center seat, D4T curtain across bed(s), D4Y side sunblind driver side, D5Y rubber mats driver and co-driver side, D5Z carpet on engine tunnel, D6F air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater in cab, D7G stowage compartment cover driver and co-driver side, D7J drawers under bed, D7K drawer under ledge, D7R storage flaps above windscreen, D8N electric sunroof, D9A preparation for upper comfort bed, wide, E0D battery sensor (Hella), E1C batteries 2 x 12 V/220 Ah, low maintenance, E1N alternator 28 V/100 A, E3B 12 V/15 A supply point for additional consumers, E3L 24 V/15 A socket passenger side footwell, E3Q additional socket 24 V/15 A passenger side footwell, E4W starting aid, speed limit 30 km/h, E5H night driving light switch, E6A trailer socket 24 V, 15-pin, E7F remote cable control for air suspension, E9G prep. for electrical devices, F0Y mirror trim construction vehicle, F1I L-cab StreamSpace, 2.50 m, level floor, F2P cab 765 mm mounting height, F3B cab suspension comfort, steel-sprung, F3W cab tilting device, mechanical-hydraulic, F4X exterior stowage compartment flap left, F5L exterior sun visor, transparent, F6C tinted windscreen, F6I heated front mirror, F6Q air horn, F7B bumper corners steel, F7D bumper center section towing eyes, coupling jaw, F7T door extension, F7Y cab access left/right movable, F8E locking system with central locking, G0A drivetrain 44 t to 68 t, G0W off-road driving program, G2F transmission G 330-12/11.63-0.77, G5A single-disc clutch, G5G Mercedes PowerShift 3, I6X air suspension rear axle, J1E instrument cluster 12.7 cm with additional displays, J2H multimedia radio touch, J2K 2-way speaker system, J3Z axle load measuring device, JBFE parking brake on front axle activation via additional switch, K0T main tank left, K1M tank 510 l left alu, K3V AdBlue tank 60 l left, L1N fog lamps, LED daytime running light, cornering light, L1Q construction taillights, in metal housing with grille, L9C preparation headlamps...

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 Iedpoyga Ugsfx Ad Ejar • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: excellent (used), Year of construction: 2001, Tool milling machine Macmon M 100 NC Infinitely variable speed control, Tool holder SK 40 Coolant device Operating manual Iaedpfjx Hga Dex Ad Ejr

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,564 h, load capacity: 1,200 kg, lifting height: 6,500 mm, free lift: 2,140 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load center: 600 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: very good Front tire type: Vulkollan Ijdpfsw N Trkex Ad Esar Front tire condition: 80 - 100% Rear tire type: Vulkollan Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: overhauled and tested battery Battery type: PzS Battery year: 2019 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift Mast traverse Safety light, beacon light Lift height display, 360° steering

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 2000 mm 11 mm 11 mm 7 mm 8 mm 6.4 mm 225 mm 215 mm 165 mm 8 m/min 3950 mm 1200 mm 1200 mm 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Iasdpfx Aoypbp Red Eor Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guide for the movement of the lower rolls Ultra wide rolls blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Central lubrication system Pressure manometer for constant pinch roll control Extra torque and special braking system Safety cord with emergency stop Equipped according to "CE" regulations OPTION: CNC control Siemens PSG-Absolute with 15" touch screen (automatic calculation of the process for simple and complex shapes)

Condition: used, mileage: 275,000 km, power: 265 kW (360.30 HP), first registration: 12/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, Manufacturer Scania Model P360 6x4 Hvidtved Larsen Flexline 312 Euro 6 Year 2014 Condition Very good Serial Number YS2P6X40002102182 Ref. nr. 598073 Reg. date: Hk: 360 Km: 275000 Gearbox: Manual GRS905 Eurotype: 6 Diesel tank: 1 Tank liter: 300 Cabin heater: ? Cabin type: CP16L Radio: ? Drum brake: ? Isdpfx Adsyra A Us Eear ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 315/80 Cover% left 40 - 100 - 80% Front suspension: Springs Suspension rear: Springs Wheelbase: 4500 mm. Toolbox: ? Hydraulic system: ? Total weight: 26000 kg. Manufacturer: Hvidtved Larsen FlexLine 312 Tank capacity: 12.000 l. High pressure pump: Uraca KD 718G High pressure capacity: 390 l/min 140 bar High pressure pump hours: 1057 Vacuum pump: CVS Vacustar W1600 Vacuum capacity: 26,667 l/min. Vacuum pump timer: 1659 h. Water heater: ?

Condition: excellent (used), Professional set of milling and drilling tool holders with SK40 / ISO40 taper, compliant with DIN 69871 A standard. The set includes approximately 25 ready-to-use tools with mounted milling cutters and drills. Tool diameter range: from Ø4 mm to Ø12 mm – an ideal set for serial production. Holder length: 50 mm – compact and precise, perfect for CNC machining centers. The set includes various tool types: end mills, taps, countersinks, solid carbide drills, and chamfer mills. Some tools are coated – suitable for machining steel, stainless steel, aluminium, and cast iron. All holders are used and in good technical condition – inspected and ready for immediate use. Products from renowned brands: ZÜRN Germany and Orion. Option to purchase the entire set or individual items. Iedpfxsxldr Eo Ad Eoar

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Iedpfxexcg H Ho Ad Eear Please note that several units are available, all in the same Ø12×50 size.

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) Capacity: Up to 3,000 bottles/hour (330 ml) Filling system: 12 counterpressure long-tube valves Capping system: 4-head crown capper (26 mm) Bottle format: 0.33 L (prepared) Working pressure: 2.0 – 2.2 bar Working temperature: 0 – 4 °C (optimal) Oxygen pickup: 10–12 ppb dissolved oxygen Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump Product pump: Included CIP system: Automatic and programmable Machine direction: Left to right Construction: AISI 316L stainless steel Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) Capacity: 2,000 – 6,000 bph Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm Labelling stations: 1 (option for second station) Label type: Self-adhesive (also supports polypropylene labels) Bottle infeed: Screw conveyor system Sensors: Self-adjusting photocell for transparent labels Control system: Processor board with inverter-based speed regulation Output system: Smoothing unit with adjustable perforated belt Transport system: 1.5 m conveyor with traction motor Rotary tables: 1 infeed + 1 outfeed, both motorized Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer Function: Seals top and bottom of cartons Adjustments: Width and height adjustable Conveyor: Plastic rollers, 1.5 – 4.5 m   Iodpfxeyb S S He Ad Eoar

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Iajdpfxsxxrhno Ad Eer Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: new, Technical data for the pallet rack traverse: Shelf system: Kimer Iasdsnmytcepfx Ad Eer The scope of delivery includes: 01x pallet rack traverse, new Material color: RAL2004 pure orange Type of cross beam: TB120x50 agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.400 kg, with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.