Second-hand machinery for sale (200,000)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW Cedpfxozncmao Aitjha DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Chedszlxnhopfx Aitoa Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 300 mm Spindle bore diameter: approx. 52 mm Maximum main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Control system: FANUC CNC Machine weight: approx. 2,200 kg Operating hours: approx. 6,458 h Spindle hours: approx. 4,300 h Voltage: AC 380 V (with or without transformer) Rated power: 14.97 kVA Full load current: 22.74 A Interrupting capacity: 5 kA Short-circuit capacity: 10 kA Power of the electric motor according to the manufacturer: 7.5 kW EQUIPMENT Technical documentation Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with rapid indexing Compact design with low space requirements User-friendly CNC control High reliability Cedpfjznb Ntex Aitoha Low maintenance requirements Complete technical documentation

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: R17393-376-4-0, overall weight: 32 kg, load capacity: 8 kg, controller model: Yaskawa YRC1000, teach pendant manufacturer: Yaskawa, number of axes: 6, TECHNICAL DETAILS Robot axes: 6 Payload: 8 kg Self-weight of robot arm: 32 kg MACHINE DETAILS Controller: Yaskawa YRC1000 Teach pendant manufacturer: Yaskawa Power supply: 3-phase AC 380–440 V, 50/60 Hz Input current: 15 A Cjdpfx Aiozmwafotsha Max. device overcurrent protection current: 15 A Short-circuit current: 2.5 kA Power supply type: ERAR-1000-06VX8-E10 EQUIPMENT Yaskawa Motoman GP8 robot arm Yaskawa YRC1000 robot controller

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 211 S, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar passage max.: 65 mm Diameter of front spindle bearing: 110 / 150 mm Collet clamping system: up to 60 mm HAINBUCH collet system: up to 65 mm Main spindle Spindle speed max.: 3,000 rpm Power of main spindle motor: 11 / 15 kW Main turret Number of tool positions: 8 Tool holder: VDI 30 Max. working stroke Z-axis: 50 mm Rapid traverse speed: 15 m/min Feed force: 6,790 N Additional sub-turret Number of tool positions: 8 Tool holder: VDI 20 Csdpfszpximjx Aitoha Cross slide Number of horizontal slides: 2 Working stroke X1/X2 axis max.: 70 mm Working stroke Z1 axis max.: 230 mm Feed force X1/X2 axis: 8,000 N at 50 bar Vertical slide Number of vertical slides: 2 Working stroke X3/X4 axis max.: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force X1/X2 axis: 8,000 N at 50 bar MACHINE DETAILS Dimensions & Weight Machine height: 1,700 mm Footprint: 2,900 x 1,700 mm Machine weight: 4,100 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over the slide: 350 mm Maximum bar diameter: 51 mm Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Counter spindle Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool stations: 12 Equipment: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Codpfjzpxgxox Aitsha Rapid traverse B-axis: 18 m/min Feed ranges Feed X-/Z-axis: 0–5,000 mm/min Feed C-axis: 1–2,000 rpm MACHINE DETAILS Control system: Mazatrol PC Fusion CNC 640T EQUIPMENT Counter spindle Bar feeder

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) EQUIPMENT Codpfx Aiszpxdwjtjha Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Chsdpfjzpw Iujx Aitja The spindle was replaced on November 14, 2018. TECHNICAL DETAILS Travel in the X-axis: 880 mm Travel in the Y-axis: 630 mm Travel in the Z-axis: 630 mm Spindle speed: 12,000 rpm Controlled B-axis: -15° to +90° Tool holder: SK 40 Number of tool magazine slots: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle operating hours: 50,033 h EQUIPMENT Coolant system

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1119, travel distance X-axis: 1,100 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! Csdpfx Aiozpw Egotoha TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 8,000 rpm Rapid traverse rate, X/Y/Z-axis: 18 / 18 / 15 m/min Table area: 1,200 × 600 mm Workpiece weight, max.: 1,000 kg Spindle connection: ISO 40 Number of tool changer positions: 24 MACHINE DETAILS Control system: Siemens 840D SL ShopMill Coolant pressure through the spindle: 20 bar Connection power: 400 V, 50/60 Hz Current: 50 A Dimensions & Weight Footprint: approx. 3,000 × 2,350 mm Machine weight: approx. 8,000 kg EQUIPMENT ShopMill Preparation for 4th axis

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC530, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in the X-axis: 1,200 mm Travel in the Y-axis: 700 mm Cedpezpwykofx Aitoha Travel in the Z-axis: 750 mm Spindle speed: 8,000 rpm MACHINE DETAILS Control model: Heidenhain TNC 530 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 6.3 A Operating hours Spindle hours: 5,238 h Control on-time: 17,705 h

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, pivoting range: 45 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 560 mm Codpfxozpwydj Aiteha Travel range, Y-axis: 500 mm Travel range, Z-axis: 400 mm Spindle speed range: 25 – 6,300 rpm Swivel range, vertical milling head: +45° Clamping surface, vertical: 300 x 450 mm Number of threaded holes: 2 x 6

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 300 mm, table length: 450 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 400 mm Codpfozpwx Hex Aitoha Work table surface area: 300 x 450 mm Number of threaded holes: 2 x 6

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 18199, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 210, TECHNICAL DETAILS CNC control: FANUC 30iM for 5-axis machining Working area Travel in X-axis: 550 mm Travel in Y-axis: 410 mm Travel in Z-axis: 450 mm Swivel range of B-axis: +110 to −110° Rotational range of C-axis: 360° Feed rate Rapid traverse rate for X, Y and Z axes: 50,000 mm/min Rapid traverse rate for B-axis: 30 min⁻¹ Rapid traverse rate for C-axis: 50 min⁻¹ Tool magazine Number of tool positions (standard): 30 Extension of the tool magazine: 210 tool positions Preparation for expansion to 240 tool positions Pallet system Number of pallets: 10 Pallet size: Ø 130 mm Pallet interface: Capto C6 Workpiece size: max. Ø 250 × H 250 mm Workpiece weight: max. 40 kg Csdpfxezpyh Rj Aitjha Pallet clamping force: 22.5 kN Main spindle Spindle speed: 40 – 20,000 rpm Motor power: 7.5/11 kW Spindle torque: max. 70 Nm up to 1,500 rpm Spindle interface: HSK 63A Special functions: High-speed start-up at machine start, Automatic warm-up cycle MACHINE DETAILS Machine weight: approx. 12,000 kg Coolant system Coolant pressure through the spindle: 70 bar Delivery rate of internal cooling: 24 l/min Pump capacity of internal cooling: 5.5 kW EQUIPMENT Direct linear scale from Heidenhain in the X, Y and Z axes Linear scale with pneumatic locking Direct linear scale via rotary encoder for the B and C axes CE marking KNOLL coolant system Drag chain chip conveyor Coolant filter CTS25-50T External cooling Coolant shower Compact filter KF200 Cooling water cooler VWK 90-D Coolant spray bars in the working area Two spiral chip conveyors Mechanical air filter TEBARON TEB/BV2 Single column with base plate for the air filter system Measuring probe Renishaw OMP 60 Software Easy Probe Pressure sensor for tool length measurement and tool breakage monitoring

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired Chjdpfx Asznmpxoitja TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage Chedpfezmxdlex Aitoa EQUIPMENT Take-out system Conveyor belt, capacity: 1825 lt/h TPS robot, model: TRT-M4-72-E One of the following mold options can be selected: Option 1: MHT mold, 72-cavity, for 30.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5-liter bottles) Option 2: 72-cavity core sets for 27.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0-liter bottles) Note: In addition to the machine, only a dryer and a cooling system are required to start production.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN498167, Year of construction: 2015, operating hours: 15,254 h, lifting height: 4,700 mm, free lift: 1,490 mm, mast type: triplex, construction height: 2,132 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Free lift: 1,490 mm Lift height: 4,700 mm Overall height: 2,132 mm Csdszrlxgepfx Aitsha MACHINE DETAILS Mast type: Triplex Battery voltage: 48 V Battery capacity: 625 Ah Battery year of manufacture: 2015 Hydraulic valves: 3rd/4th valve on the fork carriage Operating hours: 15,254 h EQUIPMENT Triplex lift mast with free lift 3rd/4th hydraulic valve on the fork carriage Charger External reference: SL9789SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 90621285, Year of construction: 2021, operating hours: 560 h, lifting height: 2,800 mm, construction height: 1,950 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 2,800 mm Overall height: 1,950 mm MACHINE DETAILS Mast type: Standard mast Battery type: Lithium-ion battery Operating hours: 560 h EQUIPMENT Initial lift Charger Codpfx Aiezrlw Ajtjha External reference: SL1145SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386H10283, Year of construction: 2017, operating hours: 5,612 h, lifting height: 4,625 mm, free lift: 1,500 mm, construction height: 2,121 mm, Equipment: sideshift, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Overall height: 2,121 mm Free lift: 1,500 mm MACHINE DETAILS Mast type: Triplex mast with free lift Battery voltage: 48 V Battery capacity: 585 Ah Tires: new Operating hours: 5,612 h Cedpfx Aezrlwieitjha EQUIPMENT Cabin Battery Charger Side shifter External reference: SL11370SP

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: TK4S35322107121, working width: 3,200 mm, cutting speed: 90,000 mm/min, sheet thickness (max.): 50 mm, working length: 3,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Suitable materials: corrugated cardboard, cardboard, foam boards, films, label material, textiles, honeycomb panels, and other non-metallic materials Previous area of application: textile cutting Working area: 3,500 x 3,200 mm Max. material thickness: 50 mm Max. working speed: 1,500 mm/s MACHINE DETAILS Chsdpfjzpxg Esx Aitsa Condition: disassembled Rated voltage: 380 V Mains frequency: 50/60 Hz Rated power: 24.38 kW EQUIPMENT - Vacuum table - Powered rotary tool - Drag knife - Pin tool - Camera system - Conveyor system - Roll loading device - Workstation with computer and software

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,421 h, functionality: fully functional, machine/vehicle number: 29100009074, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece diameter (max.): 140 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travel range X-axis: 640 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Clamping area length: 850 mm Clamping area width: 600 mm Chjdpozpxqdjfx Aitsa T-slots: DIN 650-14 Loading height, top edge of table: 850 mm Table load max.: 600 kg Spindle manufacturer: Franz Kessler GmbH Speed: 1,600 - 4,700 / 4,700 - 16,000 rpm Number of magazine slots: 30 Slot coding: Fixed slot coding Load weight max.: 90 kg Chip-to-chip time without free travel logic t3/t2: 6.8 s Chip-to-chip time without free travel logic t1 (30): 7.9 s Chip-to-chip time with free travel logic t3/t2: 8.3 s Chip-to-chip time with free travel logic t1 (30): 9.3 s TOOLS AND TOOL MAGAZINE Diameter, standard tool max.: 100 mm Diameter, special tool with free neighboring slots max.: 140 mm Tool length max.: 300 mm Tool weight max.: 6 kg FEED Feed force X, Y, and Z axes: 7,000 N Feed rate X, Y, and Z axes max.: 40 m/min Rapid traverse speed Y and Z axes: 40 m/min Rapid traverse speed X axis: 70 m/min Ball screw diameter/pitch: 40/15 mm POSITIONING SYSTEMS Positioning accuracy, direct measuring system X-axis: 0.008 mm Positioning accuracy, indirect measuring system Y and Z axes: 0.020 mm Positioning accuracy, direct measuring system (option): 0.010 mm Resolution: 0.001 mm Input fineness X, Y, and Z axes: 0.001 mm MACHINE DETAILS Operating hours: 11,421 h Power-on time: 32,054 h Connected power: 33 kVA Nominal current max.: 58 A Fuse rating: 63 A Mains voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 230 V Control voltage: 24 V COOLANT AND CHIP MANAGEMENT Chip box container capacity: 150 l Pump capacity, external coolant supply: 50 l/min Pressure, external coolant supply: 2.0 bar Pump capacity, chip flushing: 90 l/min Pressure, chip flushing: 1.9 bar Pump capacity, flushing gun: 50 l/min Pressure, flushing gun: 2.0 bar

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Chedpfx Aozpw Hdoitja Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: like new (used), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: S2000BM-00308, turning diameter over cross slide: 360 mm, turning length: 540 mm, turning diameter: 360 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 600 mm, bar passage: 68 mm, Only 3 operating hours - the machine has not yet been used due to a project cancellation. New price: EUR 124,000 plus VAT. TECHNICAL DETAILS Max. swing diameter over bed: 510 mm Max. swing diameter over slide: 360 mm Max. turning diameter: 360 mm Max. turning length: 540 mm SPINDLE Spindle nose: A2-6" Bar capacity: 68 mm Max. spindle speed: 4,500 min⁻¹ Main spindle motor power: 15 / 18.5 kW C-axis: continuous Chedpfxszpwmqs Aitja TURRET Tool stations: 12 / BMT 55 Motorized tool stations: 3.7 / 5.5 kW Speed of motorized tool stations: 5,000 min⁻¹ Max. torque motorized tool stations: 16 Nm Indexing time tool turret: 0.15 s Tool holder for external tools: 25 × 25 mm Tool holder for internal tools: Ø 40 mm TAILSTOCK Tailstock mounting: MK 4 Tailstock type: programmable Tailstock quill stroke: 450 mm Tailstock quill diameter: 75 mm Tailstock taper: MT 8 Tailstock quill force: 5,047 Nm AXES AND FEEDS Travel X-axis: 210 mm (180 + 30 mm) Travel Z-axis: 600 mm Drive power X/Z-axis: 1.8 / 3.0 kW Guide rail inclination: 45° Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Ball screw X-axis: Ø 28 mm Ball screw Z-axis: Ø 40 mm ACCURACY Unidirectional positioning repeatability: 6 µm Positioning accuracy X-axis according to ISO 230-2:1988: 15 µm Positioning accuracy Z-axis according to ISO 230-2:1988: 15 µm MACHINE DETAILS Operating hours: 3 h Control system: FANUC 0i TF PLUS Connected load: 31 kVA Supply voltage: 380 V ±10 % Mains frequency: 60 Hz Phases: 3 Machine length without chip conveyor: 2,643 mm Machine depth: 1,560 mm Machine height: 1,920 mm Machine weight incl. chip conveyor and transformer: 4,000 kg COOLANT SYSTEM Coolant tank volume: 185 l Coolant pump output: 0.5 kW Coolant flow rate: 20 l/min Coolant pressure: 5.0 bar EQUIPMENT - FANUC 0i TF PLUS CNC control system - CE conformity - IndustryNet4 connection: remote maintenance, remote monitoring and Industry 4.0 requirements. - Manual Guide i (MG-i) - Preparation for tool force monitoring - 10.4" color LCD monitor - Electronic handwheel - USB interface - Ethernet interface - RS-232 interface - Memory card slot - Manual tool measurement - Parts catcher - Hydraulic 3-jaw chuck, Ø 200 mm, bore 68 mm - Rigid threading - Control cabinet with heat exchanger - Automatic coolant system with 4.5 bar pressure - Central, time-controlled lubrication system - Cooling system for the hydraulic unit - Belt-type chip conveyor with right-hand discharge - Electrical and electronic preparation for bar loader - Internal machine work light - External machine status indicator

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 117591299, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS MACHINE DETAILS Weight: 17,600 kg Length without attachments: 2.55 m Length with attachments: 3.70 m Width without attachments: 0.9 m Width with attachments: 1.25 m Cedpfjznmdvsx Aitjha Height without attachments: 4.15 m Height with attachments: 4.30 m Mains voltage: 415 V AC Frequency: 50 Hz Hydraulic oil: AGIP OSO 46 Thermal oil: AGIP ALARIA 3 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! Codpfx Aeznmb Ieitjha TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Voltage: 400 V / 50 Hz Design: Industrial design EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 660 t, overall weight: 28,000 kg, heating capacity: 31 kW (42.15 HP), plate length: 1,900 mm, plate width: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 660 t Press plate dimensions: 1,900 × 1,600 mm Heating capacity: 31 kW MACHINE DETAILS Chodpoznmbzjfx Aitsa Electrical data Operating voltage: 400 V Control voltage: 220 V Frequency: 50 Hz Phases: 3 + N + PE Rated current: 160 A Connected power: 108 kW Machine weight: approx. 28,000 kg Design: Lower platen heating press / molding press EQUIPMENT Heated press plates Documentation