Used Versalift Etl-36-130-F for sale (25,277)

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli MVF 49/F angular gear (i=14) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 14 mm ,used, small traces of use, 100% functional Cobvsi D Hrushu Izerb

Condition: used, Year of construction: 1994, x-axis 3000 mm y-axis 2000 mm z-axis 1250 mm load of moving table 12,5 t table surface area 1600 x 2000 mm tool taper SK50 Angle heads 0° - 180° Grad control TNC 335 Serial number 12517 total wight 28 t control HEIDENHAIN TNC 335 UNION BFK 130 - CNC boring machine x-axis: 3000 mm y-axis: 2000 mm z-axis: 1250 mm Table load: 12.5 tonnes Total weight: 28 tonnes Csbvsu Dpfcehu Izsrb Serial number: 12517 Operating hours: 39030 hours Control: HEIDENHAIN TNC 335

Condition: ready for operation (used), Year of construction: 2005, Krauss Maffei KM 130 - 380 CX injection molding machine Year: 2005 Controller version: MC5 Technical details Clamping unit Clamping force: 1300 kN Mould opening force, max.: 70 kN Moving platen feed force Opening: 35.4 kN Moving platen feed force Closing: 31.4 kN Mould platen size (h x v): 840 mm x 840 mm Distance between pressure beams (h x v): 530 mm x 530 mm Mould opening stroke: 600 mm Mould height min.: 300 mm Daylight max.: 900 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit Crsbvhu Ijv H Au Sszsb Screw diameter: 40 mm Ls/D ratio: 23 Injection pressure: 1860 bar Sweep volume: 201 ccm Injection weight, PS: 183 g Injection rate: 377 ccm/s Screw speed: 390 1/min Maximum plasticization rate: 25 g/s Nozzle pressure: 50 kN Electrical and hydraulic equipment Nominal pump motor capacity: 18.5 kW Installed heating power: 8.12 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1700 1/h Drying cycle time: 2.1 sec. Tank capacity: 489 ltr. Dimensions and weight Machine dimensions: 4.30 m x 1.6 m x 2.1 m Total machine weight: 5600 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 38,732 h, Functionality: fully functional, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 250 mm, pressing force: 130 t, bending length: 3,100 mm, travel distance X-axis: 600 mm, TECHNICAL DETAILS Control: MMC ByBend Working area Csbvhuev E Iu Us Izsrb Bending length: 3100 mm Column clearance: 3200 mm Pressing force: 130 t Working height: 1060 mm Thrust: 250 mm Stroke: 400 mm Installation height: 915 mm Axes & travel paths Controlled axes: Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 X-axis travel path: 600 mm X-axis travel speed: 500 mm/s R-axis travel path: 250 mm R-axis travel speed: 200 mm/s Y-retraction: 150 mm/s Y-working speed: max. 1-10 mm/s Y-rapid traverse: 150 mm/s Back stop: 1200 mm MACHINE DETAILS Machine dimensions (LxWxH): 4440 x 2950 x 3100 mm Machine weight: approx. 13,400 kg EQUIPMENT - Tool holder with hydro cushion (top) and 3-point die holder (bottom) with hydraulic tool clamp - Sliding table for flattening operations - BWS-T protective devices as access protection at the rear (Sick safety curtain) & BWS at the front - Bending aid at the rear (0-75°) with brush inserts, H, A, W axes continuously programmable - Pair of stop fingers (complex) - Side stop for dies - Table extension (station) left for supports - Additional plates for dies V=60 and larger - Additional foot switch for second operator or station - Articulated arm for control Extensive tool package included in delivery

Condition: new, power: 367.75 kW (500.00 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, Equipment: air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, sleeping cabin, spoiler, STOCK CAR MY2023, example vehicle, while stocks last Highlights: - 500hp - 16-speed automatic transmission - 385/55R22.5 steering axle tires - 315/70R22.5 rear axle tires - aluminum rims - LED headlights - side paneling - tank 650 + 450 L - electro-hydraulic steering assistance with 3 driving modes - DAB radio - navigation Crsbvhuev Dh Ekj Izsb Price may vary depending on equipment, plus VAT. Alternatively without side paneling, without LED with steel rims but with intarder for the same price.

Year of construction: 1989, Condition: good (used), Langsbeweging: 1,350 mm Cross movement: 600 mm Vertikaalbeweging: 500 mm Table: 2,000 * 600 mm Crebvhued Ht R Se Izsb Control: Heidenhain TNC 355 Equipped with the following accessories: ISO 40 spindle taper with 8 KW drive Tool changer 18 PCs.

Condition: new, Heller SL90 F A 23 slide-in card Uni Pro CNC 90 < unused > in opened OVP 100 % functional Crsbvji Ea E Rshu Izsb

Condition: refurbished (used), Functionality: fully functional, load capacity: 150 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Croberwnphsvhu Izeb Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: used, Year of construction: 2014, Type: IRB 6640 M2004 Crsbvhevwb Ireu Izeb Variant: IRB 6640-130/3,2 Year: 2014 The ABB IRB 6640-130/3.2 robot is a 6-axis robot arm, it has a payload of 130 kg and a reach of 3200 mm. Manufacturing applications include Finishing. Machine has Pendant + Elektrobox / however it was used in Line there the box is maybe needs some adjustment for working alone. Weight ca: 1340 kg

Condition: used, Year of construction: 1999, Used Shrink Wrapper OCME VEGA S 60-2-F 48000 bph The used shrink wrapper OCME VEGA S 60-2-F is a high-performance and reliable packaging solution, ideal for wrapping bottles, cans, or other containers using shrink film. Designed for high-speed production lines, this machine can achieve an impressive output of up to 48,000 bottles per hour (BPH), making it suitable for large-scale production needs while ensuring accuracy and efficiency. Main Features Model: OCME VEGA S 60-2-F Maximum speed: Up to 48,000 bottles per hour Configuration: Operates on 2 tracks to optimize production capacity Supported formats: Various bundle configurations such as 3×2, 4×3, and 6×4, compatible with PET bottles, glass bottles, or cans Packaging material: Shrink film, with or without tray support Cobjvgu Dxevhu Izerb The OCME VEGA S 60-2-F is engineered to support different formats, enabling flexibility in meeting various packaging requirements. With its dual-track setup, the machine maximizes production efficiency, ensuring consistent throughput even during intensive operation. Benefits of the OCME VEGA S 60-2-F High productivity: Thanks to its dual-track design, the machine is tailored to meet the needs of high-demand production environments, such as large beverage or food processing plants. Format versatility: It seamlessly handles multiple packaging configurations, whether you need multipacks for retail or bulk distribution. Energy efficiency: Designed with optimized thermal systems to reduce energy consumption while maintaining fast and reliable shrink wrapping. Robust and reliable: Built with industrial-grade components, the machine ensures long-lasting operation, even in challenging production settings. Easy maintenance: Features accessible components for fast, routine maintenance and minimal downtime, enhancing productivity on the production floor. Applications The OCME VEGA S 60-2-F is versatile and ideal for various applications, including: PET or glass bottles: Suitable for packaging water, soft drinks, beer, and oils. Cans: Designed to handle beverage cans for soft drinks, beer, or food products. Other containers: Handles a wide range of plastic, glass, or composite containers, making it suitable for both food and non-food industries. The ability to switch between different formats and configurations ensures that the machine is ready to adapt to changing production demands. Whether you are packing small retail units or larger multipacks, this machine guarantees flexible operation without sacrificing efficiency. Why Choose a Used OCME VEGA S 60-2-F? Opting for a used shrink wrapper like the OCME VEGA S 60-2-F offers businesses the opportunity to acquire premium packaging equipment at a fraction of the cost of a new machine. Each unit undergoes rigorous inspection, testing, and servicing to ensure full functionality and operational readiness before delivery.

Condition: used, Year of construction: 2000, operating hours: 2,755 h, Field of application: Construction Make of engine: Deutz Capacity: 3,7 m³/m General condition: average Technical condition: average Visual appearance: average Compressor type: Screw compressors Working pressure: 7 bar Please contact Sales Department for more information Crsbsq Ea Abjvhu Izeb

Condition: ready for operation (used), Indramat MAC112B-0-GD-2-C/130-B-0/S005 permanent magnet three-phase servo motor , serial no. according to photo , hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm ,used, minor signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Csbvhuei D Ip Hj Izorb

Condition: refurbished (used), Functionality: fully functional, load capacity: 60 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Crjbvhusrqgduo Izob Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: ready for operation (used), Indramat MAC117E-0-ES-2-F/180-B-1/S001 Permanent magnet motor , hole spacing of the mounting holes: 152 x 152 mm, Ø drive shaft: 28 mm, used, normal signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Crsbvhu Ioi D Irpozeb

Condition: refurbished (used), Functionality: fully functional, load capacity: 240 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Cjbvhsrqgfkou Izerb Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: ready for operation (used), Indramat MAC112B-0-GD-2-C/130-B-0/S005 permanent magnet three-phase servo motor , serial no. according to photo , hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm ,used, minor signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Crebvsi D Ip Ajhu Izeb

Condition: new, Siemens 6FX1120-3BC01 Sinumerik module board Vers F < unused > 100 % functional Csboi Ed N Aovhu Izerb

Condition: ready for operation (used), Siemens 6FX1110-7AB01 Sinumerik card E Stand F used 100% functional Csbvji Ed Iwjhu Izerb

Condition: ready for operation (used), Indramat MAC112D-0-HD-2-C/130-A-2//SO18 servo motor , serial no., 41402 V , hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm, used, good condition, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Cebei D Iqysvhu Izerb

Condition: new, Heller uniPro SYS90-F CNC card C 23.020206X-00711 < unused > in sealed OVP 100 % functional Cjbvhuoi Ea Hrs Izorb

Condition: new, SKF 7026 ACD/P4ADGA Precision angular contact ball bearing Bore 130 mm Outer diameter 200 mm Width 34 mm < unused > in OVP 100 % functional Crebvhuoudrlpj Izsb

Condition: ready for operation (used), Indramat MAC112B-0-GD-2-C/130-B-0/S005 permanent magnet three-phase servo motor , serial no. according to photo , hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm ,used, minor signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Csbvhuoi D Ipxo Izsrb

Condition: ready for operation (used), Indramat MAC115D-0-DS-2-F/180-B-0// Permanent magnet three-phase servo motor , used, overhauled by the manufacturer in 2010 and not used since then, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Cjbvsi D Irlshu Izjrb

Condition: ready for operation (used), MAC115D-1-DS-S-F/180-B-0 Permanent magnet motor, hole spacing of the mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm, used, normal signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Cjbvhusi D Ngke Izerb

Condition: new, Dittel F 20971 Built-in balancing head 829-5-10 , serial no. according to photo ,unused with traces of storage, 100% functional Cjbvhei D Upnsu Izsrb