Used Versalift Etl-32-125 Rlc for sale (24,959)

Condition: used, Year of construction: 2022, operating hours: 64 h, carrying capacity of cage: 227 kg, construction height: 2,150 mm, wheelbase: 1,300 mm, total length: 1,850 mm, front tire size: 12x4,5, rear tire size: 12x4,5, drive type: Elektro, construction width: 820 mm, net weight: 1,173 kg, working height: 7,790 mm, front tire type: Genie, rear tire type: Genie, - Arbeitshöhe max. 7,79 m - Plattformhöhe – eingefahren 5,79 m - Plattformlänge - außen 1,63 m - Plattformlänge - ausgeschoben 2,54 m - Plattformausschub 0,91 m - Plattformbreite – außen 0,74 m - Geländerhöhe 1,10 m - Höhe der Fußleiste 0,15 m Dob Hcjvkhxqsmyascg - Höhe – eingefahren: inkl. Geländer, klappbar 2,11 m - Höhe – eingefahren Geländer heruntergeklappt 1,75 m - Länge – eingefahren 1,83 m - Länge - eingefahren, mit ausgefahrenem Plattformausschub 2,74 m - Max. Personen auf der Plattform (innen/außen) 2/1 - Tragfähigkeit 227kg - Fahrgeschwindigkeit - eingefahren 4,0 km/h - Fahrgeschwindigkeit - ausgefahren 0,8 km/h - Steigfähigkeit - eingefahren 25% - Wenderadius - innen Null - Wenderadius - außen 1,55 m - Hub-/Senkzeit 16/29 Sek - Steuerung proportional - Antrieb Zweirad-Vorderradantrieb - Mehrfachscheibenbremsen Zweirad-Hinterachse - Nichtmarkierende Vollgummi-Reifen 30x11x20 cm/12 x 4,5 x 8 in - Antriebsart 24 V (4 x 6 V 225-Ah Batterien) - Tankinhalt Hydrauliksystem 14,2 L - Geräusch-/Schalldruckpegel (Boden)

Condition: excellent (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001° Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Dob Houkgacocmyaocg Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 turning speeds 50 - 12000 U/min no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Furnishing: - HEIDENHAIN control TNC530 - chip conveyor - Coolant system 350 / 2.5 bar - Working area hood Dcebov S Irte Hcmyasg Machining values: - max. milling capacity: 600cm³/min - max. drilling Ø: 44 mm - max. thread Ø: M30 operating hours: - control on = 68283 hours - machine on = 67782 hours - program run = 20891 hours

Condition: good (used), Lamina 1110 FA Fully automatic Sheet to sheet laminator The machine is fully operational and ready for production, in perfect condition. Year of production 2017. The machine has an automatic sheet and cardboard feeder, glue pump, built-in vacuum, pressure module and receiving table. Control from a touch computer. Description: Lamina 1110 FA is a very precise, fully automatic sheet laminating (gluing) machine. The machine is designed for materials with dimensions of up to 1100 x 1050 mm. Thanks to the compact design of the machine, the set-up time is short and the operation is uncomplicated. The machine’s construction is based on a very durable, rigid frame made of extruded aluminum structural profiles. Thanks to this design, we get an attractive machine with durable surfaces, the coating of which will remain in good condition for many years. Any of the options can be added at any time Technical data: Working width max/min: 1100 mm / 200 mm Sheet length max/min: 1050 mm / 350 mm Feeder capacity Upper feeder: 500 mm Lower feeder: 800 mm Dob Hcmowhayyjyaecg Upper sheet 130 to 450 g/m2 Lower sheet From 250 g/m2 to 10 mm, corrugated from 0.6 to 10 mm Accuracy Up to 0.2 mm Total installed power 6.0 kW Power supply 380V Weight 4500 kg

Condition: ready for operation (used), Siemens 1FT5036-1AK71-3EA0 permanent magnet motor SN EH583205903001 + HE 65M encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Deb Hcmjl Syg Ueyajcg

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Deb Hcmyswf Rg Eeaocg --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, Year of construction: 2025, operating hours: 1 h, power: 1 kW (1.36 HP), carrying capacity of cage: 227 kg, construction height: 2,000 mm, wheelbase: 1,550 mm, ground clearance: 40 mm, total length: 1,880 mm, front tire size: 12x4,5, rear tire size: 12x4,5, drive type: Elektro, construction width: 820 mm, net weight: 1,306 kg, working height: 7,640 mm, front tire type: Genie, rear tire type: Genie, - Max. Personen auf der Plattform (innen/außen) 2/1 - Tragfähigkeit 227 kg - Tragfähigkeit – ausgefahrener Plattformausschub 113 kg - Verfahrbar bis max. Plattformhöhe 5,55m - Fahrgeschwindigkeit – eingefahren 4,0 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25%/14° - Wenderadius – innen/außen 0/1,37m - Hub-/Senkzeit 26/20 sec - Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° - Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm Dsb Hcmyewgpkloascg - Antriebsart 24V DC (2 × 12V 115Ah) - Tankinhalt Hydrauliksystem (E-Drive) 5,7 L - Max. Reifen-Traglast 570 kg - Reifenkontaktdruck 1.133 kPa - Bodenlast 12,14 kPa - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s2

Condition: used, Functionality: fully functional, machine/vehicle number: E1X355B00010, Year of construction: 2011, operating hours: 2,700 h, load capacity: 32,000 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: duplex, construction height: 6,950 mm, power: 209 kW (284.16 HP), fork length: 2,400 mm, engine type: Cummins QSC8.3, drive type: Diesel, net weight: 46,100 kg, Heavy-duty forklift truck - Diesel Fahrgestellnummer: E1X355B00010 Load center: 1200 Fork width: 300 mm Fork thickness: 120 mm Mast type: Duplex Gearbox: Clark-Dana TE17 Condition: Ready for use and fully functional Technical condition: good Front tires type: Air Front tires Size: 16.00-25 Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Size: 16.00-25 Rear tires Condition: 80 - 100% Deb Hcmjwfi H Rjyaecg Description: good running and working machine. New tires on back axle. Sideshift, tine adjuster, Centrallubrication = central lubrication el. lifting cabin = electric cabin lift. Heating, full cab,

Condition: used, Year of construction: 2009, cutting diameter 300 mm saw band length 3320 mm cutting width 330 mm 3320 x 27 x 0,9 mm 15 + 100 m/min 300 mm 260 mm 330 x 260 mm 180 mm 170 x 170 mm 170 mm li. 260 / re. 200 mm li. 270x200 / re. 200x160 mm li. 250 / re. 180 mm 2,2 kW Dsb Hetxcypocmyaecg 1060 kg 2300 x 1945 x 2000 mm Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band

Condition: new, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 5 h, General information Field of application: Construction Technical information Track width: 60 cm Empty weight: 19.800 kg Make of engine: ALUW06DTI Top speed: 6 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 400 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,52x2,8x3,1 Dsbswdwuys Hcmyaocg Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, Siemens 1FT5034-0AK01-1-Z permanent magnet motor, Z= see rating plate, SN:EF393299701001, unused in opened original packaging, 100% functional, scope of delivery as per photos Dcjbji D Rx Ne Hcmyaeg

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V Djb Hcewf Rgxjmyascg --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, Year of construction: 2025, operating hours: 1 h, power: 1 kW (1.36 HP), carrying capacity of cage: 227 kg, construction height: 2,000 mm, wheelbase: 1,550 mm, ground clearance: 40 mm, total length: 1,880 mm, front tire size: 12x4,5, rear tire size: 12x4,5, drive type: Elektro, construction width: 820 mm, net weight: 1,306 kg, working height: 7,640 mm, front tire type: Genie, rear tire type: Genie, - Max. Personen auf der Plattform (innen/außen) 2/1 - Tragfähigkeit 227 kg - Tragfähigkeit – ausgefahrener Plattformausschub 113 kg - Verfahrbar bis max. Plattformhöhe 5,55m - Fahrgeschwindigkeit – eingefahren 4,0 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25%/14° - Wenderadius – innen/außen 0/1,37m - Hub-/Senkzeit 26/20 sec - Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° - Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm - Antriebsart 24V DC (2 × 12V 115Ah) - Tankinhalt Hydrauliksystem (E-Drive) 5,7 L - Max. Reifen-Traglast 570 kg - Reifenkontaktdruck 1.133 kPa - Bodenlast 12,14 kPa - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s2 Dcjbswgpihs Hcmyasg

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm 40 / 80 m/min 3650 x 27 x 0,9 mm 300 mm 260 mm 330 x 260 mm 260 mm 250 mm 270 x 200 mm 180 mm 170 mm 170 x 170 mm 870 mm 2,35 kW 0,7 t 2,7 x 1,6 x 2,0 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear Dcsbsuia D Do Hcmyajg size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically returned) Description: Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks

Condition: new, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 5 h, Equipment: air conditioning, General information Field of application: Construction Technical information Track width: 60 cm Empty weight: 19.800 kg Make of engine: ALUW06DTI Top speed: 6 km/h Dcsb Hcmswdwumeyaeg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 400 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,52x2,8x3,1 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: ready for operation (used), Siemens 1FT5044-0AC01-1 - Z AC-VSA-Motor SN:E9L82362101010 + 6FC9-320-3 KN 00 / ROD 426.016 Encoder Id. 238 694 23 SN:2838063 , Z= H27: Encoder system / 2500 pulses / revolution ( axial power output ), the encoder connection cable is missing, see photo,used, normal signs of wear, 100% functional, scope of delivery as per photos Djb Hovabh Rocmyaecg

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V Dsb Hcmyowf Rgreascg --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, cutting diameter 300 mm saw band length 3650 mm cutting width 330 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round L 260 mm capacity 45 degrees: square L 250 mm capacity 90 degrees: flat L 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm capacity 45 degrees: round R 200 mm capacity 45 degrees: square R 180 mm capacity 45 degrees: flat R 200 x 160 mm saw band length 3650 x 27 x 0,9 mm cutting speed 40 / 80 m/min total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,640 t dimensions of the machine ca. 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Description: CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) Either automatic or manual cutting cycle Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Doboppgdwe Hcmyaocg Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm with millimeter scale Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks

Condition: ready for operation (used), Siemens 1FT5044-1AF71-3AB0 AC VSA motor SN:EJN10049332006 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dcob Hevc Npnecmyasg

Condition: ready for operation (used), Siemens 1FT5066-0AC71-2 - Z AC-VSA motor Z= see type plate, SN:YFC233289101002, the motor was overhauled at Siemens and then stored for a long time, used, normal signs of wear, 100% functional, scope of delivery as per photos Dsb Hsi D Sd Aecmyaocg

Condition: ready for operation (used), 1FT5066-0AF71-1 Motor AA 824206 with 6FX2001-2CC50 ID: 521 285-38 Rotary encoder SN: 42673732A,used, good condition, 100% functional, scope of delivery as per photos Dcob Hou Hu Rpscmyaeg

Condition: ready for operation (used), Rexroth HDS03.2-W075N-HS32-01-FW MNR: R911279891 SN:278088-08621, used, normal signs of use, 100% functional, scope of delivery as per photos Dcsboi Ect De Hcmyaeg

Condition: ready for operation (used), Fanuc A16B-3200-0042 / 02A - A16B-3200-0042/02A CPU Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Dsb Hcsi D U D Rjmyascg

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EB0 Motor SN: EH583205901001 with Heidenhain ROD 426 2500 03S12-03 encoder SN: 8564836A, used, good condition, 100% functional, scope of delivery as per photos Dcsb Hcmyju I Npvjasg

Condition: ready for operation (used), Heidenhain UM 112 inverter ID 325 001-01 SN 8377884 A, the item has been completely overhauled and has a 3-month warranty, professionally completely overhauled and tested, minor signs of wear, 100% functional, scope of delivery as per photos Dsbjvmu Nhe Hcmyaecg