Used Versalift Vdt-170-F for sale (8,060)

Condition: excellent (used), machine/vehicle number: 28652, table mounting size: 250 x 800 mm x-axis: 400 mm y-axis: 175 mm z-axis: 450 mm spindle retainer: ISO 30 spindle rotations: 50-2000/50-3400 rpm operating voltage: 380 V Dcob Hlysh D Rzuo Tmjg total energy requirement: ca. 2,5 kVA kW space needed: 1200 x 1000 x 1600 mm weight: ca. 1100 kg

Condition: used, Year of construction: 2017, operating hours: 6,584 h, Functionality: unexamined, Equipment: Basic version DW 3060-F "Buffalo" (carrier machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive 50 mm EC towing eye including slip-on shoe Hydraulically adjustable support leg Splash guard (inside and side fenders) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, meets EUROMOT IV emissions standard Reinforced planetary gear 380 kW Dob Hlevnmfqsy Tmjcg Additional hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Rear conveyor: conveyor length 5,500 mm, conveyor width 1,200 mm, hydraulically foldable, with anti-magnetic middle section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Reversing of the roller using an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Additional equipment: Hydraulic drive SHREDDING SYSTEM SIZE "L" 600/4 KPL. Additional hydraulic connection 70 l/min Radio remote control Comb extension size "L" limiter Mounting comb extension limiter size "L" Overband magnet for rear belt Frame for overband magnet Moistening device

Condition: used, Functionality: fully functional, machine/vehicle number: W41173G04119, Year of construction: 2016, operating hours: 170 h, load capacity: 2,000 kg, lifting height: 3,180 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, drive type: Elektro, net weight: 1,660 kg, High lift truck Fahrgestellnummer: W41173G04119 Mast type: Duplex Condition: Reconditioned without warranty Technical condition: very good Front tires type: Polyurethane Battery Volt: 24V Battery Ah: 300Ah Battery year of construction: 2016 Description: Linde L 20 AP No.: R0322 Year of construction: 2016 Operating hours: 130 The device is visually and technically in good condition. Charger on request Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Wire mesh protection External loader Load rollers Tandem access Key switch intg. Scales Dceb Hlsuhw Htoy Tmeg

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: H3391, height adjustment type: electric, table length: 1,200 mm, power: 7 kW (9.52 HP), table width: 900 mm, extraction nozzle diameter: 120 mm, spindle diameter: 30 mm, pivoting range: 45 °, - Motorized lifting, lowering and swiveling of the milling spindle with numerical displays Dsb Hlsvmzyaoy Tmjcg - Stop adjustment via hand crank with numerical position displays - 3 roller feeder WEGOMA VARIO 3 with continuously adjustable speeds

Condition: new, power: 367.75 kW (500.00 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, wheelbase: 3,600 mm, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Equipment: air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, sleeping cabin, spoiler, STOCK CAR MY2023, example vehicle, while stocks last Highlights: Dceb Hlev Dhz Soy Tmsg - 500hp - 16-speed automatic transmission - 385/55R22.5 steering axle tires - 315/70R22.5 rear axle tires - aluminum rims - LED headlights - side paneling - tank 650 + 450 L - electro-hydraulic steering assistance with 3 driving modes - DAB radio - navigation Price may vary depending on equipment, plus VAT. Alternatively without side paneling, without LED with steel rims but with intarder for the same price.

Condition: used, Year of construction: 1989, 1 – Semi-automatic lower flap folder Manufacturer : Soco System Model: F-100-P Year : 2000 Carton size : Min. carton width: 320 mm Max. carton width: 520 mm Max. case length: 700 mm 2 – Automatic case and flap sealer / Tape sealing machine Dob Hly Tsvly A Remocg Manufacturer: Soco System Soco System Model: T-400 5-5-7 Year: 1989 Adhesive top and bottom closure. Capacity: Max. 18/min. Carton size : Mini: 200 x 120 x 95 Max: 550 x 460 x 470

Year of construction: 1980, Condition: used, machine/vehicle number: 5103811, table mounting size: 440 x 1200 mm table movement x: 950 mm Debjda U Dge Hly Tmocg table movement y: 250 mm table movement z: 475 mm spindle taper: ISA 40 spindle turning speed range: 40 - 1800 rpm carriages longitudinal and cross: 16 - 630 mm/min carriages vertical: 5,6 - 224 mm/min electrical connection: 380 V, 7,5 kVA kW space needed: 2150 x 2000 x 2100 mm weight: 2400 kg

Condition: used, Functionality: fully functional, Stirling Ultracold ULT-25NE Ultra-Low Temperature (-86ºC) Portable Freezer We have three units in stock, price is for one unit only. Dob Hlyjv H Dvws Tmocg Good working condition. Please check out our other listings as well.

Condition: good (used), mileage: 344,146 km, power: 265 kW (360.30 HP), first registration: 12/1986, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/80/22.5, fuel: diesel, wheelbase: 5,600 mm, driver cabin: sleeper cab, gearing type: mechanical, suspension: parabolic leaf (spring), Year of construction: 1986, Equipment: parking heater, sleeping cabin, spoiler, = Further options and accessories = - Leaf spring suspension - Roof hatch - Roof spoiler - Large storage space Dcebevmp Tns Hly Tmog - Air horn - Parabolic suspension - Radio/cassette player - Sleeping cabin - Side door - Sunshade flap - Auxiliary heating = Further information = Technical information Number of cylinders: 6 Gearbox Gearbox: 16 gears, manual gearbox Axle configuration Tire size: 315/80/22.5 Brakes: Drum brakes Suspension: Parabolic suspension Front axle: Steered; Tire profile left: 70%; Tire profile right: 70% Rear axle: Double tires; Tire profile left inside: 80%; Tire profile left outside: 80%; Tire profile right inside: 80%; Tire profile right outside: 80% Dimensions Dimensions (L x W x H): 945 x 250 x 400 cm Weights Empty weight: 11,415 kg Payload: 8,585 kg GVW: 20,000 kg Condition Technical condition: good Visual condition: good More information Contact Bart Companjen, Giel Companjen, Frans Moran Santos, Bertus Companjen or kantoor, office, buro. for more information.

Condition: new, axle configuration: > 3 axles, suspension: hydraulics, color: red, tire size: 245/70 R17.5 Double Fitted (143/141J), Year of construction: 2024, Equipment: tail-lift, Kleur: Rood Load capacity: 100,250 kg. Weights: King pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg GVW: 134,000 kg Empty weight: 33,750 kg Loading capacity: 100,250 kg Axles: Brand Axles: BPW ECO PLUS Hydraulic suspension 7 axles steering (Axle 2 rigid) Dcebeuu E Tio Hly Tmeg first two axle liftable Drum brakes Brake SN 3020 for ABS, with sensors Tires: 245 / 70 R17.5 Double fitted Load index 143/141J Measurements: Length: 17,700 mm Extensions: 19,500 mm Max extended length: 37,900 mm Loading floor width: 3,990 / 3,450 mm Loading floor height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information NATO plug Hydraulic foldable ramps Outriggers + planks for widening loading floor Electro hydraulic pump for functions of trailer Spare wheel + holder Working lamps Rear bumper with lights King-pin 2.0” Central greasing Lashing rings Wooden loading floor Marker boards for oversize load Remote control General information Year of manufacture: 2024 Axle configuration Tire size: 245/70 R17.5 Double Fitted (143/141J) Axle brand: BPW ECO PLUS Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: double tires; lift axle; Max. axle load: 12000 kg; steered; tire profile left inside: 100%; tire profile left outside: 100%; tire profile right inside: 100%; tire profile right outside: 100% Rear axle 2: double tires; lift axle; Max. axle load: 12000 kg; tire profile left inside: 100%; tire profile left outside: 100%; tire profile right inside: 100%; tire profile right outside: 100% Rear axle 3: double tires; Max. axle load: 12000 kg; steered; tire profile left inside: 100%; tire profile left outside: 100%; tire profile right inside: 100%; tire profile right outside: 100% Rear axle 4: double tires; Max. axle load: 12000 kg; steered; Tire profile left inside: 100%; Tire profile left outside: 100%; Tire profile right inside: 100%; Tire profile right outside: 100% Rear axle 5: Double tires; Max. axle load: 12000 kg; Steered; Tire profile left inside: 100%; Tire profile left outside: 100%; Tire profile right inside: 100%; Tire profile right outside: 100% Rear axle 6: Double tires; Max. axle load: 12000 kg; Steered; Tire profile left inside: 100%; Tire profile left outside: 100%; Tire profile right inside: 100%; Tire profile right outside: 100% Rear axle 7: Double tires; Max. axle load: 12000 kg; Steered; Tire profile left inside: 100%; Tire profile left outside: 100%; Tire profile right inside: 100%; Tire profile right outside: 100% Rear axle 8: Double tires; Max. axle load: 12000 kg; Steered; Tire profile left inside: 100%; Tire profile left outside: 100%; Tire profile right inside: 100%; Tire profile right outside: 100% Dimensions Dimensions (L x W x H): 1770 x 299 x 381 cm Weights Empty weight: 33,750 kg Payload: 100,250 kg GVW: 134,000 kg Functional Loading area height: 105 cm Extendable body: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Further information Contact Stefan Schaapveld for further...

Condition: excellent (used), mileage: 340,634 km, first registration: 10/2014, fuel type: diesel, color: orange, axle configuration: 8x6, fuel: diesel, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, sleeping cabin, soot filter, spoiler, = More options and accessories = - Aluminium fuel tank - Brake booster - Electric windows - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Refrigerator - Air suspension - Air horn - Fog lights - Particle filter - Reversing camera - Sleeping cabin - Sunshade - Stability control - Auxiliary heating - Toolbox - Power take-off (PTO) - Central locking = More information = Technical information Number of cylinders: 6 Curb weight: 21,600 kg Drivetrain Fuel tank: 500 liters Gearbox Gearbox: I SHIFT, automatic Axle configuration Front axle: Steered Rear axle 1: Steered Rear axle 2: Dual tires Rear axle 3: Dual tires Condition Technical condition: very good Visual condition: very good VOLVO FMX 500 8X6 + PALFINGER PK 65002-SH F POWER LINK PLUS CRANE + JIB PJ 125 E L PACKAGE 500 HP DRIVE 8X6 WHEELBASE 390 CM AIR SUSPENSION I-SHIFT AUTOMATIC TRANSMISSION FMX SLEEPING CABIN WITH AIR CONDITIONING NAVIGATION FRIDGE CAMERA ADJUSTABLE FIFTH SEAT PLATE MANY TOOL BOXES PALFINGER PK 65002-SH F POWER LINK PLUS CRANE + JIB PJ 125 E TOTAL 13X HYDRAULICALLY EXTENDABLE OIL COOLER FOR CRANE HYDRAULICS 4X SUPPORT Djb Hly Tsuxul Djmscg RADIO CONTROL MAX LIFTING CAPACITY 19100 KG MAX LIFTING CAPACITY OP 3050 CM 470 KG MAX WORKING HEIGHT 34.8 METERS PALFINGER PJ125 E JIB EZ 2014 ONLY USED FOR 1 MONTH ! ! 6X HYDRAULIC EXTENDABLE + 2X MANUAL THIS JIB IS AS GOOD AS NEW! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Dcobsdy Hrde Hly Tmjg Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Year of construction: 2012, Condition: excellent (used), Geppert belt AM-F 7.30m x 0.30m with drive The plastic modular belt AM-F is characterised by its slim design. The width of the frame is only 14mm more than the chain. At the deflection it is also only 40mm more. The frame including the chain is 95mm high. Dcjbsg Ib U Hs Hly Tmog The modular plastic chains of the AM-F are optimal to clean, particularly hard-wearing and maintenance by replacing individual links is easy to realise. Technical data: Year of manufacture: 2012 Length: 7.30m Width: 0,30m Height: 1,00m Drive: 220/240V 1pH Complete factory lock, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2002, width 52 cm age 2002 automatic paper folding machine computer control with monitor flat pile feeder FSA 52 with suction head 1. station: 4 folding pockets 52 cm following knife shaft 2. station: 4 folding pockets 52 cm 3. station: 2 folding pockets 38 cm Dobevphm So Hly Tmecg stream delivery

Condition: used, Year of construction: 2018, operating hours: 2,986 h, JCB 540-170 telehandler from 2018 with only 2,986 operating hours! ----* Manufacturer: JCB * Type: 540-170 4x4x4 * Lifting height: 17 meters * Load capacity: 4 tons * Year of manufacture: 2018 * Operating hours read: approx. 2,986 Dsb Hljvrm R Ujy Tmjcg * Sway = leveling * Power: 55 KW * Operating weight: 12,300 KG * Good condition! * Loading forks * Additional hydraulics * Rear view camera * Cabin * Windscreen protection grille * Video available on request * More photos available on request * Shovel available for an additional charge! * Price: 53,900 euros, net + 19% VAT ----For further questions please call: For more questions please call: Erik Kortum: Whats App Kai Kortum: Whats App

Condition: like new (used), Year of construction: 1989, operating hours: 810 h, Functionality: fully functional, machine/vehicle number: 892161, total height: 2,860 mm, sheet thickness (max.): 6 mm, total width: 2,425 mm, overall weight: 9,000 kg, ram adjustment: 61 mm, pressing force: 160 t, Here you have the unique opportunity to buy a Feintool GKP F 160 that has hardly been used. Feintool GKP F 160. The machine has just 810 hours. As you can see from the pictures, the machine is in top condition. We purchased the press in 2019 but, like its predecessor, never used it. It was tested by us without tools and the machine works. Technical data of the FEINTOOL GKP F 160 fine blanking press Maximum sheet thickness: 6 mm Maximum sheet width: 210 mm Total force including auxiliary functions: 160 t Shearing force: 100 t Hydraulic counterweight force (upper table): 1-40 t Hydraulic force of the ring jaw (lower table): 12-50 t Ejector force (pump pressure): 4-8 t Hydraulic shearing force: 7.5 t Pneumatic shear force: 6.6 t Stroke of the pusher: 61 mm Maximum number of pusher strokes: 72/min Dcsb Hlysumigqs Tmjg Minimum number of pusher strokes: 18/min Motor power: 11 kW Pump power: 4 kW Air connection: 6 bar Dimensions (L x W x H): 2380 x 1870 x 2860 mm Weight of the GKP F 160 machine: 9000 kg

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 5070000136, Large paternoster A Kasto Unitower F 3.0 heavy-duty paternoster from 2004 is for sale. Technical data: Dceb Hlysvz Tkmj Tmjg Manufacturer: Kasto Maschinenbau Model: Unitower F 3.0 Machine number: 5070000136 Year of manufacture: 2004 Max. payload of control unit: 3,000 kg Max. payload per cassette: 3,000 kg Number of compartments: 103 Price on request. Viewing possible by arrangement. If you are interested or have any further questions, please get in touch!

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm table: 1250 x 335 mm table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min Dceb Hlysh Rawfo Tmeg rapid traverse: Connection: 6 kW Accessories/equipment: Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

Condition: good (used), Year of construction: 1995, machine/vehicle number: 61778- 224715, infeed width: 520 mm, Equipment: compressor, Flat pile feeder 4 folding pockets Dsbev Amcrj Hly Tmecg Counter and pre-selection counter Cross-fold station Belt delivery 2nd delivery SAK56 Pump Becker

Condition: good (used), PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, control card Simatic S5 -Type: PC 612 F B1200 6ES5281-4UA12 -Dimensions: 275/200/H50 mm -Weight: 0.5 kg Dcob Hly Tjhy Rpmomeg

Condition: used, Year of construction: 2018, operating hours: 2,986 h, load capacity: 4,000 kg, lifting height: 17,000 mm, fuel type: diesel, construction height: 2,690 mm, gearing type: semi-automatic, Equipment: cabin, head guard, JCB 540-170 telehandler from 2018 with only 2,986 operating hours! Dcjb Hlevrm Rnsy Tmog ----* Manufacturer: JCB * Type: 540-170 4x4x4 * Lifting height: 17 meters * Load capacity: 4 tons * Year of manufacture: 2018 * Operating hours read: approx. 2,986 * Sway = leveling * Power: 55 KW * Operating weight: 12,300 KG * Good condition! * Loading forks * Additional hydraulics * Rear view camera * Cabin * Windscreen protection grille * Video available on request * More photos available on request * Shovel available for an additional charge! * Price: 53,900 euros, net + 19% VAT ----For further questions please call: For more questions please call: Erik Kortum: Whats App Kai Kortum: Whats App

Condition: excellent (used), mileage: 1,125 km, fuel type: diesel, color: white, axle configuration: 6x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, cruise control, navigation system, sleeping cabin, soot filter, spoiler, trailer coupling, = More options and accessories = - Aluminium fuel tank - Brake booster - Electric windows - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Media system - Fog lights - Particle filter - Sunshade - Stability control - Toolbox - Power take-off (PTO) - Central locking - Tow bar = More information = Drivetrain AdBlue system: Yes Axle configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Weights Empty weight: 17,712 kg Functional Mast: Telescopic (8 sections) Mast length: 24.5 m Deb Hleuxxupey Tmocg Lifting capacity: 13,500 kg Lifting height: 2,450 cm Crane: FASSI F485RA.2.28 XE-DYNAMIC, behind the cabin Brand of the body: FASSI F485RA.2.28 XE-DYNAMIC CE marking: yes Condition Technical condition: very good Visual condition: very good NEW AND UNUSED MAN TGX 33.520 6X4 SZM TRUCK COMBI WITH FASSI F485RA.2.28 XE-DYNAMIC CRANE + WINCH EURO 6 L PACKAGE 520 HP DRIVE 6X4 10 TONNES FRONT AXLE WHEELBASE 430 CM AIR SUSPENSION TGX SLEEPING CABIN WITH AIR CONDITIONING REFRIGERATOR NAVIGATION WEBASTO AUTOMATIC TRANSMISSION WITH MOTOR BRAKE SZM TRUCK COMBI FIFTH PLATE + TRAILER COUPLING TOOL BOXES FASSI F485RA.2.28 XE-DYNAMIC CRANE + WINCH OIL COOLER FOR CRANE HYDRAULICS TOTAL 8X HYDRAULICALLY EXTENDABLE MAX WORKING HEIGHT 24.5 METERS !! MAX LIFTING CAPACITY 13,500 KG MAX LIFTING CAPACITY OP 20.75 METERS 1325 KG LARGE HYDRAULIC WINCH WITH HOOKS AND ROLLERS 4X SUPPORT RADIO CONTROL PREPARATION FOR REMOVABLE BALLAST BED TRUCK AND CRANE ARE NEW AND UNUSED !!!!! 4X IN STOCK !!!! FOLLOW OUR INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY FOR SALE WE SPEAK ENGLISH WE SPEAK ESPANOL

Condition: used, color: other, Year of construction: 2018, Year of construction: 2018 Part suitable for: machines VAT/marginal taxation: VAT deductible = Company information = Watch out! Prevent Internet Fraud. Always check our bank account number on our website before transferring money. We or our employees will never ask you to make a payment to a different bank account number than the bank account number which is mentioned on our website. If someone asks you to transfer money to a different bank account number, please always contact us by phone before you transfer the money Bank: RABO BANK / Apeldoorn IBAN no.: NL39RABO0366234978 Bic/Swift code: RABONL2U Euro Trucks Little Enkweg 4 7383 DC, Voorst Djbjuxp Itj Hly Tmscg Holland Huig Kalberg: Fax: E-mail:

Condition: new, Year of construction: 2025, Functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Dcob Hlyjvca Dpe Tmsg Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, Year of construction: 2025, Functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump Dcob Hly Tjvca Egomjg > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)