Used Schaffer 4350 Z for sale (11,359)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 17,985 h, Control Unit Brand HEIDENHAIN Model 426 Main Drive Number of axis 3 Dsb Hcpjviy Inj T Aout Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm This 3-axis DEPO Jet vertical machining centre was manufactured in 2000. It features a HEIDENHAIN 426 control system and a 12-tool magazine. With a travel capacity of 1200 x 800 x 800 mm and 17,985 working hours, consider the opportunity to buy this DEPO Jet vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2015, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Djb Hcpewh Tzwo T Aout Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Movement stroke X 450mm Movement stroke Z 904mm Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Maximum tool length 250mm GENERAL MACHINE OPTIONS

Condition: used, Year of construction: 2006, Control: MSX-850III Travel: X-260 mm, Z-1,345 mm; max. turning length: 1.298 mm turning diameter: 356 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Rod diameter: 80 mm Rapid: 30 m/min Spindle speed: 4,000 rpm Spindle motor: 18.5/15 kW tool turret: 12 powered stations Drive power AGW: 5.5/3.7 kW Speed driven tools: 6,000 rpm programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa Debswg Egvs Hcp T Aeut programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws

Condition: excellent (used), Year of construction: 2002, CNC MACHINING CENTER DECKEL MAHO DMC 64 V LINEAR 2002 Heidenhain iTNC 530 Technical Specifications: X-AXIS MOVEMENT: 640 MM Y-AXIS MOVEMENT: 600 MM Deb Hcpewgk Dgj T Ajut Z-AXIS MOVEMENT: 500 MM SPINDLE SPEED RANGE: 12,000 RPM TOOL HOLDERS: SK 40 OUTER LENGTH: 850 MM OUTER WIDTH: 630 MM MAX. TABLE LOAD: 600 KG

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 315 mm z-travel 495 mm table surface area 1.230 x 410 mm quill travel 180 mm control Heidenhain TNC 426 tool taper SK 30 total power requirement 20 kW weight of the machine ca. 3,2 t In our opinion, the machine is in very good condition and can be viewed under Dobewf D Ato Hcp T Ajut power by appointment. The chuck on the 4th axis and on the table are not included in delivery. Technical features: - incl. 4th axis - Operating hours: 66,200 h - Spindle hours: 21,900 h Accesories: - Renishaw measuring probe Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Year of construction: 2023, travel distance X-axis: 210 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D SL 4.8, overall weight: 6,000 kg, spindle speed (max.): 40,000 rpm, space requirement length: 8,500 mm, space requirement width: 2,500 mm, CONTROLS .. CNC controls SIEMENS 840D SL 4.8 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 210 mm .. Y-axis travel: 270 mm .. Z-axis travel: 360 mm SPINDLE / HEAD .. spindle revolutions (max): 40000 /min .. tool fixture: HSK A40 TOOL MAGAZINE .. number of positions: 72 AUTOMATIC WORKLOAD EQUIPMENT .. workpiece manipulator: articulated robot .. number of store positions: 36 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8500 mm Dsb Hcp Tswg E Ruo Aout .. space requirements -front/back-: 2500 mm .. total weight approx.: 6000 kg ATTACHMENTS .. central lubrication system: yes .. chip conveyor: yes .. coolant unit: yes .. through spindle coolant attachment: yes .. European CE standards: yes -Siemens tool management with retooling -Fanuc Automation Robot M-10IA -Operating hours: 7,200 h - of which spindle 1 original, spindle 2: 3896 h

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,195 h, General Data Measurements width 3767 Measurements depth 4954 Measurements height 3187 Machine weight 8400 Control Unit Brand HURCO Main Drive Spindle speed range 12000 / optional 16000 Spindle motor power 36.5 kw Tool taper SK40 Movement X-Axis Movement 1067 mm X-Axis Rapid Traverse 38 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 38 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 32 m/min B-Axis Movement +/- 90º B-Axis Rapid Traverse 50 rpm C-Axis Movement 360º C-Axis Rapid Traverse 100 rpm Table Tslots size 5 x 18 x 100 Min distance between vertical spindle and table 9 mm Max distance between vertical spindle and table 619 mm Table load 1360 kg Tools Slots in storage 40 Max weight 7 kg Max tool diameter 75 mm Max tool length 250 mm Media Chip conveyor Yes Additional Equipment Coolant capacity (l): 314 Equipped with: Renishaw calibration, through-spindle cooling, linear scales This 5-axis Hurco VMX 42 SRTi was manufactured in 2018. A universal machining centre, it offers advanced capabilities for complex and precise machining tasks. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 42 SRTi machine we have for sale. Contact us for more information. Deb Hov Dyndocp T Ajut Application Types Milling

Condition: used, Year of construction: 2007, x-travel 640 mm Dueb Hourgarecp T Ast y-travel 600 mm z-travel 500 mm control Siemens 840 D total power requirement 19 kW weight of the machine ca. 8 t dimensions of the machine ca. 5 x 4 x 3 m No. 5312: Vertical machining center DECKEL MAHO type DMC 64 V linear year of construction 2007 Working area: 640 x 600 x 500 mm Drive power: 13/19 kW Equipment: Table 850 x 600 mm ( WITHOUT the clamping devices shown ) Preparation 4th axis Production package / IKZ 40 bar: BFA 600 cooling lubricant cleaning system Integrated spiral chip conveyor Separate scraper belt chip conveyor documentation Miscellaneous: Spindle ISO 40 Speed range 1-12,000 min-1 Space requirement see sketch Transport dimensions approx. 6.5 loading meters Weight approx. 8.8 tons The machine is ready for operation with wear and tear due to age and use. Short video: ?v=sDkgx4BYXeY Special price ex works EXW - free loaded on suitable truck - 17.500,-- EUR

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: H-H30888, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Type: "VMX 30i" equipped with WinMax control, chip conveyor, internal cooling, spindle cooling On request CNC configuration: − NC production package − Industrial standard NC − Pocket with islands − Helix − Synchronous thread − Surface selection − Tool & material database − Ultimonitor Machine configuration: Table clamping area 510 x 1020 mm Travel paths X-axis Y-axis Z-axis 760 mm 510 mm 610 mm Spindle mount SK 40 24-station tool changer Infinitely variable spindle speed 12,000 rpm Rapid traverse 35,000 mm/min Contour feed 15,240 mm/min Space requirement 3,900 x 4100 x 2800 mm Transport dimensions 2300 x 2300 x 2550 mm Weight 5 tons The machine is connected to the power grid and can be inspected with power on by appointment. Dob Hcjwgdd Hjp T Asut Technical specifications and dimensions: Errors excepted. Prices are quoted: plus VAT, ex warehouse, freight prepaid. Delivery time: immediately available from stock, subject to prior sale. Payment: Advance payment. Sincerely, Wiegand

Condition: used, Year of construction: 1992, Functionality: unexamined, machine/vehicle number: 447, grinding wheel diameter: 250 mm, total height: 2,200 mm, total width: 2,500 mm, total length: 2,800 mm, overall weight: 4,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 805, Grinding speed: 63 m/s Dueb Hcpewgy Dve T Ast Note: Transportation can easily be carried out on a standard truck.

Condition: used, workpiece length - min. 300 mm workpiece length - max. 1000 mm Duobev N N U Re Hcp T Ajt working lenght 250 - 950 mm clamping diameter 130 mm Inner diameter of milling head 230 / 280 mm cutting speed 120 / 160 m/min x-axis 300 mm y-axis 300 mm z-axis 1085 mm electr. connected load 3x400V / 50Hz installed capacity: 130 KVA current intensivity max. 185 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 8 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 1990, Make: Kunzmann Type: WF5/3 Year of construction: 1990 X - axis: 500 mm Duobeffyfrs Hcp T Aet Y - axis: 360 mm Z - axis: 420 mm Clamping surface: 700 x 350 mm tool holder: SK40 spindle bore: 22 mm quill stroke: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Weight: approx. 1.6 t All information without guarantee. The machine is in a very good condition. A demonstration is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,001 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 620 mm Z-Axis Movement 620 mm Dujb Hcp Tsviy Ibs Ajt This 3-axis ACRA AHSM 1000 L vertical machining center was manufactured in 2005. It features travels of 1020 x 620 x 620 mm and has accumulated 17,001 working hours. If you are looking to get high-quality milling capabilities, consider the ACRA AHSM 1000 L machine we have for sale. Contact us for further details regarding this machine. Application Types Milling

Condition: used, Year of construction: 1991, x-travel 556 mm y-travel 356 mm z-travel 356 mm Control Ultimax 3 table surface area 765*349 mm tool magazin: 16 x Duobev Nw Rgs Hcp T Aot spindle taper ISO 40 turning speeds 60 - 5.000 U/min total power requirement 7,5 / 15 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5*2,5*2,6 m

Condition: used, Year of construction: 2008, turning length: 2,000 mm, turning diameter: 520 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 250 mm, bar passage: 77 mm, workpiece weight (max.): 1,000 kg, total height: 3,300 mm, bar diameter: 77 mm, overall weight: 17,000 kg, controller manufacturer: SIEMENS, controller model: 840 D SL, center width: 2,000 mm, distance between centers: 2,000 mm, machining diameter: 520 mm, number of spindles: 1, space requirement length: 7,700 mm, space requirement width: 4,200 mm, CONTROLS .. CNC controls SIEMENS 840 D SL BASIC FUNCTIONS .. number of spindles: 1 .. live positions: yes .. number of c-axes: 1 .. number of y-axes: 1 .. number of b-axes: 1 Dob Hcp Towg Edhs Ajut WORKING RANGE TURNING .. swing diameter (max): 520 mm .. turning diameter (max): 520 mm .. bar diameter (max): 77 mm .. worpiece length max.: 2000 mm .. workpiece weight max.: 1000 kg MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power S6 40%: 33 kW .. drive power S1 100%: 45 kW .. spindle torque S6 40%: 630 Nm .. c-axis: yes X/Z SLIDE .. Y-axis travel: 250 mm .. rotating range B-axis up to: 220 ° .. rapid traverse Z: 40000 mm/min .. rapid traverse X: 30000 mm/min .. rapid traverse Y: 15000 mm/min .. tool fixture: Milling Spindle .. number of tool positions (total): 80 .. number of live positions: 80 .. - rotation speeds (max): 9000 /min X SLIDE .. X-axis travel: 600 mm TAILSTOCK .. distance betw. centers (max): 2000 mm STEADY .. design: offen .. diameter (min): 45 mm .. diameter (max): 310 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 7700 mm .. space requirements -front/back-: 4200 mm .. total height: 3300 mm .. total weight approx.: 17000 kg ATTACHMENTS (TURNING) .. self-centering chuck: 1 .. - clamping diameter: 340 mm .. tailstock: optional .. steadies (number): 1 .. chip conveyor: yes .. coolant unit: yes .. aspiration unit: yes .. hydraulic system: yes .. European CE standards: yes Equipment: - 3-jaw Autoblok 340-117 chuck Machines in good condition and still in operation 2023 B-axis overhauled (€50,000) 2024 SMW steady rest SR5-ZSW (45-310), almost new 2025 Rotary union replaced Operating hours: - NC program runs: 29200h - Spindle running: 22200h

Condition: good (used), Functionality: fully functional, With : Feed in Y-axis !!!--. Djb Hswg A Rljcp T Ajut Quill stroke 60 mm Table surface 600 x 250 mm Speeds 45 - 1950 rpm Feed rates 10 - 470 mm/min...stepless...adjustable... : Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Vertical travel (Z) 320 mm . .

Condition: used, Year of construction: 2013, x-axis 330 mm z-axis 1.050 mm control Heidenhain spindle tunring speed 3.200 U/min drive capacity - main spindle 33 kW turning diameter 465 mm turning length 1.050 mm swing diameter 680 mm chucking diameter 305 mm spindle bearing diameter 100 mm spindle bore 76 mm max. rod diameter 72 mm number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well Dujb Hcp Tevy Iphe Ast as prior sale!

Condition: used, Year of construction: 1976, x-travel 1100 mm y-travel 700 mm z-travel 550 mm Dob Hswgn Aascp T Aeut surface area 1435 x 700 mm distance spindle /table -10 / 540 mm Number of grooves - width - spacing 8 - 16 - 80 mm min/max distance top edge table - bottom edge spin 0 - 540 mm spindle taper ISO 40 spindle turning speed range 30 - 2066 U/min feed - longitudinal/cross 1,6 - 820 mm/min vertical feeds: 0,8 - 410 mm/min Rapid traverse speed lengthwise and crosswise 2800 mm/min. vertical rapid traverse speed 1400 mm/min total power requirement 15 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,7 x 1,435 x 1,74 m The ‘MU’ universal console milling machine is designed for the fully universal machining of complicated workpieces made of steel, cast iron or non-ferrous metal with the heaviest clamping. The large square working area enables the economical machining of bulky workpieces with surfaces in different planes, often in just one clamping operation. With the Huron fully universal milling head, the milling spindle can be swivelled in quickly and safely in any direction to the workpiece or work table, so that practical and reliable solutions can be found for a wide variety of work tasks while limiting manual and non-productive times. The double control stand - on the machine and front side - allows the machine to be operated while monitoring the tool in operation, even at extreme positions of the milling spindle.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,390 h, General Data Dob Hjv Adguscp T Asut Machine weight 10500 kg Control Unit Brand HEIDENHAIN Model 640 Main Drive Spindle speed range 15000 rpm Spindle motor power 20/52.5 kW Tool taper ISO40 Number of axis 3 Movement X-Axis Movement 1200 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 730 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 650 mm Z-Axis Rapid Traverse 42 m/min Tools Number of index 32 This 3-axis MICROCUT V-30 The Challenger was manufactured in 2016. Ideal for precision machining, this vertical machining center ensures reliable performance. Consider the opportunity to buy this MICROCUT V-30 The Challenger vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), controller model: Siemens Sinumerik 810D, total length: 3,650 mm, total width: 1,738 mm, total height: 1,900 mm, net weight: 5,250 kg, swing diameter over cross slide: 750 mm, C-as lineaire meting in X-as 12 grondstoffen - VDI - max 4000 tpm Inclusief spaantransportband RS232 Swing over bed: 630 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Spindle cone: A2-8 Dia of spindle bore: 92 mm Power on the spindle: 18,5/22 kW Dsbev Sfq Hj Hcp T Asut Number of speeds: 2 > 3000 rpm Total power needed: 52 kVa Chuck: Rohm dia 254 mm Toolchanger: yes, Sauter Number of tools: 12 driven positions

Condition: excellent (used), Year of construction: 2006, 5-axis mobile crossbeam numerical control work center. JOb LINX COMPACT. Numerical Control: Siemens 840D. Year 2007 "CE", Machine works in 5 axes and has 2 electro-spindles: 1 Electro-spindle at 24000 rpm. 1 Electro-spindle at 8000 rpm. Working stroke: X-X1 axis: 6200 mm Y-axis: 3200 mm Duob Hcowhlrzop T Ajt Z-axis: 1250 mm C-axis: 400 (+-200°) A-axis: 190° (-90 / + 100) Machine dismantled in accordance with the rules of the art. Machine in perfect mechanical/electronic condition. Possibility of loading on vehicles. Technical data in attachment.

Condition: good (used), Functionality: fully functional, Data : Mounting ISO 40--- Drive power 4.0 kW--- 18 speeds 35 -2200 rpm--- Travels : 400-300-350 mm--- - Milling head with drilling quill - Universal rotary and tilting table Debowg A N Uo Hcp T Aeut - Rapid traverse in X- and Z-axis - Infinitely variable feeds in all 3 axes

Condition: used, Year of construction: 1996, x-travel 800 mm Djb Hcp Tjwgi Hme Aout y-travel 550 mm z-travel 500 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 17,424 h, General Data Machine weight 15000 Control Unit Brand HEIDENHAIN Model 640 Main Drive Number of axis 3 Movement X-Axis Movement 1750 mm Y-Axis Movement 1000 mm Z-Axis Movement 750 mm Workpiece Workpiece X 1600 mm Dueb Hcpsvz Ir Se T Aot Workpiece Y 1000 mm Workpiece weight 3000 kg This 3-axis Eumach LBM-1500 vertical machining center was manufactured in 2016. Consider the opportunity to buy this Eumach LBM-1500 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 8,827 h, Control Unit Brand HEIDENHAIN Model 640 Main Drive Number of axis 3 Djb Hcsv Adgzjp T Asut Movement X-Axis Movement 800 Y-Axis Movement 500 Z-Axis Movement 500 Table Outer length 900 mm Outer width 520 mm Table load 450 kg This 3-axis AXILE V5 vertical machining center was manufactured in 2018. Consider the opportunity to buy this AXILE V5 vertical machining center. Contact us for more information. Application Types Milling