Used Schaffer 3150 for sale (440)

Condition: used, machine/vehicle number: 2801-0234, x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min spindle taper:SK 40 milling-head swivable +/-:90° quill stroke:60 mm total power requirement:1,09 / 2,0 / 4,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,3 x 1,1 x 1,6 cm m Deckel FP2 NC Milling Machines. - Spilndle Head can be swiveled left or Right (90 °) - Angular Fixed Work Table: 620 x 390 mm (Max. Load 250 kg) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic handwheel for Easy Axis movement - Deckel Dialog 4 CNC control Systems - Mechanical hand-wheels for all axes to operate manually, Central Lubricant system, Chip tray with Splash cabin Cjlocxxm Ejn U U Eisgt

Condition: used, Year of construction: 2019, _____We sell here 1 used Mercedes Benz Unimog U 427 from year of construction 2019 with approx. 3,100 operating hours and approx. 60700 kilometers with the following equipment:6 cylinder MB engine with 272 hp, Euro 6, wheelbase 3150 mm, weight variant 12.7 tons, approval as a tractor, front PTO, electric pneumatic shift EPS, downshift transmission with work and creep speed group, cruise control, 365/80R20 Conti MPT 81, front mounting plate size 3, AHK 38.5 mm, heated windshield, radio, air conditioning, reversing camera, hydraulic system 2 circuit, 4 cells, snow plow relief, flatbed 2385x2075x400, tipping cylinder,,storage location:94491 Hengersberg Cgolnot Du H De U U Eiot

Condition: reconditioned (used), Functionality: fully functional, Year of construction: 2018, operating hours: 11,449 h, load capacity: 1,800 kg, lifting height: 3,150 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,050 mm, fork length: 1,200 mm, empty load weight: 3,100 kg, color: red, Equipment: additional headlights, cabin, lighting, pallet forks, sideshift, trailer coupling, Linde E18 Duplex Three-wheel electric forklift from 2018 with a load capacity of 1800kg. Please note that this forklift is equipped with a 48V battery. Battery tested with 86% Cjlju Shtzen U U Eijgt Mast is a triplex mast with full free lift and a lifting height of 4320mm. The forklift is equipped with a side shift. Flutter cabin pre-installation available. Double pedal. Rear loading possible. Charger included Hydraulics are tight, customer service done! All work carried out by a specialist dealer! Battery serviced. Battery was tested by a specialist service using the C5 procedure 92% (C5 test) Technical data: Manufacturer: Linde Model: E18 Year of manufacture: 2019 Load capacity: 1400kg Hours: 11449 Height: 2050mm Fork length: 1600mm. 1200mm or 1000mm possible Lifting height: 3150mm Mast: duplex mast with full free lift Side shift Rear loading connection Double pedal control Battery 86% remaining capacity Grammer seat Heat seating Street legal lights Hydraulics tight Work lights front and rear. Tires Very good, Charger 48V included Forklift in very good condition, with UVV inspection on request. Transport possible VAT can be declared Net export possible with either a valid VAT number in the EU or when exporting to a third country.

Condition: good (used), Year of construction: 2017, ​Vaadake üksikasju 346 / 5 000 Tõlke tulemused Colop Nbzhsn U U Eiogt Tõlketulemus The printer is little used, approx. 10 hours per month. A very robust machine, does everything it needs to do. The print quality is very good. Prints on all kinds of materials, we mainly used for printing on glass. Prints on material up to 100mm high. Colors CMYK, plus white option. dimensions of the printing area 3150 x 2000 mm. The work surface has the possibility of blowing and vacuum.

Condition: new, Functionality: fully functional, power: 6 kW (8.16 HP), operation weight: 3,000 kg, Year of construction: 2024, operating hours: 1 h, machine/vehicle number: 0058, Equipment: hydraulics, rubber tracks, Vibrating sorter Molesorter PREMIUM 3VD PHG-PD Cgjleunr Nksn U U Eijt The new vibratory classifier for bulk materials. Input hopper with regulated feed conveyor, 3 fractions + oversize. Side telescopic conveyors 5,5 m, built-in generator, hopper width 2800 mm, container carrier DIN 30720 hook height 1000 or 1570 mm, maximum weight 3150kg hourly output up to 90 t/hr, power 6 kW. Delivery 1/2025

Condition: excellent (used), Year of construction: 2007, TOSHIBA IS650GTW injection molding machine Year : 2007 Screw diameter : 95mm Injection weight : 2900 g Injection volume : 3150 ccm Short circuit force : 650ton Column spacing : 1080 x 1080mm Plate size : 1530 x 1530mm Celn U Usi Dbtrs Eisgt Opening path (Max. Distance): 1800mm Opening path (Min. Distance): 450 / 900mm Machine Weight: 30ton Machine size: 7.9 x 2.5 x 2.2m Core function : 5 Core Function Pneumatic drive : yes Hydraulic clamping function : yes Machine Dimensions (LxWxH): 7.9m x 2.5m x 2.2m Machine weight : 30 tons

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 11522-20, total width: 2,250 mm, total length: 16,610 mm, total height: 3,039 mm, overall weight: 20,000 kg, temperature: 140 °C, pressure: 6 bar, working width: 1,330 mm, plate width: 1,400 mm, Technical Data: Size of platens 1500x3400mm Useful surface oft he tray 1330x3240mm Maximum size of boards 1250x3150 Specific pressure max 6bar Total press power max 3078kn Number of pistons 6 Diameter of pistons D 145/250mm Filling of hyfraulic oil approx. 200 Liter Max. Operating termperature 140o C Weight of press approx. 14 000kg Load on foundation approx. 32N/cm2 PNEUMATIC: Air consumption press With 4 bar forming pressure approx. 950 Nl/cycle Air consumption pin system maximum 1800 Nl/cycle Required air pressure max. 6 bar Quality of compressed air DIN ISO 8573-1 Klasse/grade Pressure dev point: 4 Maximum particle size: 3 Maximum oil content: 3 ELECTRICKS Connected load E1: 61KW Csln Uouzgnps U Eisgt Nominal current: 115 A Supply fuse: 125 A

Condition: used, control: Heidenhain TNC 155 tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm Celn U U Eec Tt Hrsisgt accessories: angle table, coolant equipment, div. retainers

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, overall weight: 545 kg, load capacity: 15 kg, arm reach: 3,150 mm, controller manufacturer: Kawasaki, controller model: E02G-A001, Kawasaki RS015XFE02 industrial robot. Cgoln Ujuh Tmve U Eist 6-Axis robot, Handling, E02-Controller Payload: 15kg, Reach: 3150mm

Condition: used, Year of construction: 2007, Technical details: grinding length: 3150 mm grinding width: 800 mm workpiece height: 650 mm table surface area: 3.150 x 600 mm magnetic clamping plate: 3.000 x 600 mm table load: max. 6 t dimensions of grinding wheel: 450 x 100 x 127 mm : 22 kW total power requirement: 70,6 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 11 x 3 x 2,4 m surface grinding machine, CNC Flachschleifmaschine, Cjln U U Ejuh H Iyoisgt coolant device 2.500l, magnetical adhesive force control, semi automatic balancing system, *

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; -mode of operation – pneumatic; -table size (front to back) - 700mm; -stroke - 800mm; -number of blows per minute – 110; -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; Cgsln Ujfbnhws U Eiet -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; -height of machine above floor - 3750mm; -total machine's height - 4380mm; -total weight - 35t;

Year of construction: 2021, Condition: new, Field of application: Construction Empty weight: 2.450 kg Attachment suited for: Loaders Selling price: € 5.750, US$ 6.051 Bucket volume: 3.4 m^3 Edge Length: 3150mm Capacity: 3,4m^3 Cgjln Ujn Tm Sfe U Eijt Manufacturing Time: 12±3 workdays We manufacture high quality buckets and attachment for all brands. For detailed information, please contact us.

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks Cslelkgvbon U U Eijgt

Year of construction: 1982, Condition: ready for operation (used), Plate bending G 30 max tickness -30 mm max length 3150 mm rools diameter 500 mm Cgelnsnfu S Do U U Eiet main motor 37 kw

Condition: ready for operation (used), Year of construction: 2000, Universal tool milling machine TOS FNGJ 40 Csljv Tn H Hjn U U Eiogt TECHNICAL DATA: Year of manufacture 2000 X,Y,Z travels: 600,400,400 mm Table clamping area 800 x 480 mm Table load max. 400 kg Speed range 63 – 3150 rpm Quill travel 100 mm SK 40 Total power requirement 4 kW Space requirement approx. 2.2 x 2.2 x 1.9 m Machine weight approx. 2200 kg Accessories/options: Tool holders Hydraulic vice Documentations Heidenhain digital readout system for 3-axis Under power in our warehouse!