Used Schaffer 2024 for sale (2,461)

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, load capacity: 100 kg, We are offering you, subject to change, a used universal cable winding machine / electric ring winding machine, with length measuring device, for rewinding and winding cables onto other drum diameters. Manufacturer Vetter GmbH, Germany Type LM 20 (suitable for insulated cables) Year of manufacture 2014 Load capacity 100 kg Applicable cable diameter 1 - 20 mm Measurement accuracy class III, +/- 0.5% at 5 - 40 °C Minimum measuring length 5 m Max. coil diameter 800 mm Max. coil width 340 mm Drive power 0.75 kW Torque 130 Nm Winding speed up to 80 m/min. Note: The aforementioned technical data was taken from the operating instructions, manufacturer brochures or other sources for which we cannot guarantee the accuracy and completeness. Scope of delivery: Duob Hsvl Hpkjbpwwjt Universal cable rewinding machine Cable length measuring device Roller arch, pivoting, for unwinding from higher cable shelves Bracket for power supply from above Machine documentation (only available in German) Area of application and condition: The system is suitable for rewinding (winding) power cables, communication cables and data cables from drum to drum. The length of the cable is measured during the winding process. The system was still in operation until the end of 2024, is fully functional and in good condition. The sale is subject to change against bid, without warranty and guarantee, against advance payment, ex location. We would be pleased if this machine is of interest to you and you make us an offer to purchase. Your Mertens & Frowein GmbH service team

Condition: excellent (used), Year of construction: 2020, operating hours: 1,191 h, free lift: 2,000 mm, fuel type: electric, mast type: triplex, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,600 mm, General information Field of application: Internal logistics Serial number: FBA17-1390-00801 Weights Empty weight: 4.875 kg Battery Battery: 620 Ah, 80 V, Year of manufacture 2020, Brand of battery Espex Functional Lifting capacity: 2.500 kg Maximum passing height: 220 cm Condition Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Fork carriage: Sideshifter Latest inspection: 2024-02-22 Additional information Dsb Hbsrpgvyjpwwsut Please contact Johanny Hendrikse for more information

Condition: good (used), Functionality: fully functional, Year of construction: 2019, operating hours: 195 h, overall weight: 1,415 kg, Brand: Dingli JCPT0807DC Year of construction: 2019 Stock number: HW218-18 Hours: 195 Last inspection: 04-10-2024 Djb Hbpwovhaqtjwout Fuel: electric Remaining tire profile: 75% Platform height: 5.8 m Working height: 7.8 m. Horizontal reach: m. Up and over: m. Platform capacity: 230 kg. Dimensions (lxwxh): 1.87 x 0.76 x 2.02 meters Total weight GVW: 1415 CE (Declaration of Conformity). All necessary documents and papers. Neat machine! Machines come from the rental fleet. We provide inspection, maintenance and transport.

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 516345H00408, Year of construction: 2017, operating hours: 6,660 h, load capacity: 2,500 kg, lifting height: 6,050 mm, fuel type: electric, mast type: triplex, fuel: electricity, Inspection valid until November 2024 Dob Hbpetx Auajwwsut TECHNICAL DETAILS Load capacity: 2500 kg Lifting height: 6050 mm Free lift: 2200 mm Mast type: Triplex Weight: 5054 kg Dimensions: 2400 x 1250 x 2750 mm Operating time: 6093 h EQUIPMENT - Non-marking tires - work light - Charger - 4. function up to the stop

Condition: new, Year of construction: 2022, Automatic short bar loader in excellent condition (NEW) NEW (zero working hours!) > was purchased in June 2022 to be connected to a lathe, but in fact a mistake in configuration was made and the barfeeder was never used. More pictures available on request. Availability: 12/2024 Loading area 630 x 1650 mm Max load 400kg, max 48 kg per bar For bar stock ranging from round Ø 6 until 76 mm For loading of rectangular min. edge length 6 mm, envelope circle max 76 mm Hexagon spanner size 5 until 65 mm Round Ø > 15mm Length 300 mm until 1600 mm Full technical specifications in the attached document. High speed loading Glascover and movement to the front, with controlled drive two step feed, automatic adjustment of the material guidance, the separating device and the centering device without pusher SPS control board integrated terminal with touch screen, LED sign with status information, Portable operating terminal with touch screen Pusher Ø 18mm Pusher Ø 10 mm Parkhilde for pusher Down holder galvanised Storage rack ILS MUK 70 III with chain supply 600mm for profiled material Deb Hbpwovdbvcoweut

Condition: new, Year of construction: 2024, Interbake V-MIX planetary mixer bowl lift is designed to lift mixing bowls from mixers to the desired height and pour their contents into a hopper. Available in two versions: Stationary: designed for production lines and mobile: suitable for transporting bowls between devices year of build 2024 fully stainless-steel construction for durability and hygiene Deb Hsu Ttrcsbpwwsut Tailored design to integrate seamlessly with production lines and stationary equipment

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, load capacity: 100 kg, Hello, we are offering you, subject to change, a used universal cable winding machine / electric ring winding machine, with length measuring device, for rewinding and winding cables onto other drum diameters. Manufacturer Vetter GmbH, Germany Type M 20 (suitable for insulated cables) Year of manufacture 2018 Djb Hbovl Hnyjpwweut Load capacity 100 kg Applicable cable diameter 1 - 20 mm Measurement accuracy class III, +/- 0.5% at 5 - 40 °C Minimum measuring length 5 m Max. coil diameter 800 mm Max. coil width 340 mm Drive power 0.75 kW Torque 130 Nm Spooling speed 0 up to 80 m/minute Machine dimensions 1690 x 900 x 1200 mm (L x W x H) Note: The aforementioned technical data was taken from the operating instructions, manufacturer brochures or other sources for which we cannot assume any liability for accuracy and completeness. Scope of delivery: Universal cable rewinding machine Cable length measuring device Machine documentation (only available in German) Area of application and condition: The system is suitable for rewinding (winding) power cables, communication cables and data cables from drum to drum. The length of the cable is measured during the winding process. The system was still in operation until the end of 2024, is fully functional and in good condition. The sale is subject to change against bid, without warranty and guarantee, against advance payment, ex location. We would be pleased if this machine is of interest to you and you make us an offer to purchase. Your Mertens & Frowein GmbH service team

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW Dusb Hbstumqvepwwjt tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: good (used), Year of construction: 2009, Functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification Djb Hbovpu U Nepwweut -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 3 25°C/60%RH - A0431_00 - Year of construction: 2009 Climate chamber 4 30°C / 65% RH - A0432_00 - Year of construction: 2009

Condition: as good as new (ex-display), Miltenyi Biotec TS510 Tubing Set exp. 2024-01-09. We have 8 pcs in stock, price is for one pc only. The CliniMACS Prodigy® TS 510 is a single-use, biocompatible tubing set used in the CliniMACS Prodigy process LP-14, MoDC Generation. It provides a closed, sterile fluid path and enables all required cell processing steps, including cell enrichment/depletion. Duob Hbsvv Ifuopwwst Detailed product information The CliniMACS Prodigy® TS 510 disposable tubing set includes system tubing, bags and sterile access ports for addition of sample, media, and reagents, CentriCult Chamber for centrifugation/cultivation, cell separation column, and QC sampling pouches. Please check out our other listings as well.

Condition: good (used), Year of construction: 2006, MURATEC MT20GMCY double spindle CNC lathe Machine is in good condition and can be inspected in operation. Availability: end of October 2024 Power on hours (14/05/2024): 41335H Cutting hours (14/05/2024): 10116h Chuck size Ø 210 mm Swing over turret face Ø 250 mm Swing over adjacent tool Ø 225 mm (with plain head) Standard turning diameter Ø 170 mm Maximum bar diameter Ø 65 mm Maximum bar length 1150 mm Spindle speed 4200 rpm Maximum stroke X axis 230 mm Maximum stroke Z-axis1 250 mm Maximum stroke Z axis2 810mm Dueb Hbotq E S Nepwwst Equipped with: Control: FANUC 16Ti Y-axes on both turrets (100 mm stroke total) on both spindles C-axis and on both towers driven pos. 15 pieces (VDI 40) Holders (VDI40): - Drill bit holders: 12 - Rough chisel holders: 13 - Parting chisels: 2 - Axially driven holders: 4 - Radially driven holders: 2 - Chisel holder for face grooving: 1 Free passage through the draw tube 65 mm on the left spindle, 52 mm on the right spindle 18.5 kW spindle motor instead of 15 kW and 4,200 rpm chip conveyor (elevation height 1 m.) and to the rear 3 color tower lamp septum quality and rejection disc auto power off with timer setting quality push button on the control panel extraction preparation (Dormatec mist collector not included) tool monitor system (protection against tool breakage) and tool groups air blowing device on separate M code 2 pieces of chucks diameter 200 mm with passage on the main spindle of 65 mm, excluding claws automatic tool presetters left and right including fracture detection software Gantry loader with magazine WF20L-160, 30 pallets 4 pins (Ø30 mm-0170 mm) robot arm 270° indexable extended Gantry (left and right) multi position spindle stop both sides part catcher with drainage system (strap) cooling by spindle (right side) Part catcher with conveyor belt LNS bar feeder connection (bar feeder itself is not sold) Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, Interbake V-MIX 120 planetary mixer 120 liter with 2 bowls. The very solid construction of the device allows you to work with cakes and masses in the baking and confectionery industry. Thanks to the mechanical system of lifting and lowering the bowl, it is possible to work continuously without removing the tool. The innovative solution of the gearbox allowed for multiplication of the torque, which translates into higher efficiency with lower energy consumption. A very precise arrangement between the tool and the cauldron allows you to knead small amounts of masses, creams, cakes. Available in 60,80,100 and 120 liter digital control panel stepless regulation - frequency inverter control Duob Hju S E Ugsbpwwot programming 20 mix recipes programming the time of mixing automatic lifting of the bowl 3 tools included: dough hook wire whip flat beater year of build 2024 new

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, operating hours: 3,550 h, Hello, we are offering you, subject to change, a used cable winding system (cable winding reel system) with a length measuring device for picking and winding cables onto other reel diameters. Manufacturer Jakub Thaler GmbH, Germany Type KU-07 KKS Type measuring device ME01 Year of manufacture 2019 Operating hours only 3,550 hours Load capacity 10,000 kg Applicable cable diameter 10 – 80 mm Measurement accuracy +/- 0.5% Min. reel diameter 500 mm Max. reel diameter 2,800 mm Max. reel width 1,750 mm Drive power 5.5 kW Winding speed 1 – 85 m/min. Note: Dusb Hevl Hcwsbpwwjt The aforementioned technical data was taken from the operating instructions, manufacturer brochures or other sources for which we cannot guarantee the accuracy and completeness. Scope of delivery: Cable drum unwinding unit Layering stand with length measuring device Cable drum winding unit with hydraulic unit Control panel Machine documentation (only available in German) Area of application and condition: The system is suitable for rewinding (winding) power cables, communication cables and data cables from drum to drum. The length of the cable is measured during the winding process. The system was still in operation until the end of 2024, is fully functional and in good condition. The sale is subject to change against bid, without warranty and guarantee, advance payment from location. We would be pleased if this machine is of interest to you and you make us an offer to purchase. Your Mertens & Frowein GmbH service team

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: C7004367, Year of construction: 2019, operating hours: 1,706 h, load capacity: 3,800 kg, lifting height: 13,800 mm, arm reach: 8,600 mm, Equipment: sideshift, TECHNICAL DETAILS Lifting height: max. 13.80 m Reach: max. 8.60 m Load capacity: max. 3,800 kg Load capacity at full reach: max. 800 kg Drive and engine Engine: diesel (Kubota engine) Drive: 4x4 all-wheel drive Steering: all-wheel steering Tires Tires (VR/VL, HR/HL): approx. 75% Type: off-road tires MACHINE DETAILS Transport dimensions (L x W): 5.24 x 2.22 m Clearance height: 2.44 m Own weight: 8,900 kg Operating hours: 1,706 h (as of January 20, 2025) Previous owner: first owner Visual condition: good Technical condition: good Place of use: inside, outside, Terrain Maintenance and inspections Last service: 11/2024 Last UVV inspection: 11/2024 UVV valid until: 11/2025 Condition: Without UVV-relevant defects EQUIPMENT - Tow bar - Heating Dujb Hbjvr Tdzjpwwst - 4x4x4 drive - Kubota engine - Quick coupler - Level control - Supports - Merlo sideshift - All-wheel steering - Cab with heating

Condition: good (used), Year of construction: 2005, Functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. Deb Hbovpu Tlspwweut The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 1 25°C/60%RH - A0429_00 - Year of construction: 2005 Climate chamber 2 25°C/60%RH - A0430_00 - Year of construction: 2005

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 3,700 h, Functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, workpiece weight (max.): 5,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,100 mm, tank capacity: 8,000 l, pressure: 4,200 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, table height: 1,100 mm, operating pressure: 4,000 bar, warranty duration: 6 months, input current: 60 A, year of last overhaul: 2024, water pressure: 4 bar, compressed air connection: 7 bar, pump pressure: 4,200 bar, overall weight: 5,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), 3D waterjet cutting machine used by stone customer. Completely reconditioned in 2024 / 2025 ( still in progress ) by official CMS dealer. Pictures are before / during the overhaul, machine condition when delivered is like new ( last picture is an example of how we supply reconditioned machines ) Cutting head full 3D with 150 mm Z-axis range. Rotating axis range +/-274 degrees. Tilting axis +/- 62 degrees Fully 3D operated with intelligent Kerf Compensation ( IKC ) , no 2,5D head like most competitors We have been official CMS dealer since 13 years in the Benelux Rental / Lease / all in lease possible depending from geographical area. Electronic sand doseage with vacuum control 60HP Jetpower Evo pump with 3 cilinders, bringing 5 L/min at maximum 4200 bar ( L/min determine cutting speed, not the pressure ) The machine will be delivered fully reconditioned with official warranty. Off course with 100% technical performance. Deb Hbjvdnn Espwwout Installation and training possible.

Condition: as good as new (ex-display), Functionality: fully functional, Year of construction: 2024, operating hours: 105 h, lifting height: 6,010 mm, fuel type: electric, mast type: telescope, construction height: 2,645 mm, TECHNICAL DETAILS Load capacity: 3,500 kg Mast type: Telescopic Lifting height: 6,010 mm Duebouzvw Ts Hbpwwot Overall height: 2,645 mm Front tires: Non marking Rear tires: Non marking Battery: 2024, 80 V, 620 Ah Operating hours: 105 h Drive type: Electric EQUIPMENT - Sideshift - Fork positioner - 3rd valve - 4th valve - Full free lift

Condition: new, Year of construction: 2024, Interbake V-MIX 100 planetary mixer 100 liter with 2 bowls. The very solid construction of the device allows you to work with cakes and masses in the baking and confectionery industry. Thanks to the mechanical system of lifting and lowering the bowl, it is possible to work continuously without removing the tool. The innovative solution of the gearbox allowed for multiplication of the torque, which translates into higher efficiency with lower energy consumption. A very precise arrangement between the tool and the cauldron allows you to knead small amounts of masses, creams, cakes. Available in 60,80,100 and 120 liter Dujb Hbeu S Eqbopwwet digital control panel stepless regulation - frequency inverter control programming 20 mix recipes programming the time of mixing automatic lifting of the bowl 3 tools included: dough hook wire whip flat beater year of build 2024 new

Condition: good (used), Year of construction: 2018, operating hours: 1,750 h, Functionality: fully functional, machine/vehicle number: 4466, overall weight: 9,400 kg, tank capacity: 1,100 l, power: 774 kW (1,052.35 HP), continuous power: 800 kW (1,087.70 HP), continuous power (apparent): 850 kVA, total length: 66,600 mm, total width: 21,600 mm, total height: 30,000 mm, type of cooling: water, fuel: biodiesel, input voltage: 400 V, connection type: 400 volts + neutre, frequency: 50 Hz, rotational speed (max.): 1,500 rpm, type of input current: AC, warranty duration: 1 months, KOHLER SDMO generator type MTU850 Continuous power 800 KVA. Dujb Hbperh Ehrswwot MTU 12-cylinder V engine, type 12V2000TD G26F. Alternator LEROY SOMER type LSA 49.3 M8 Self-priming, protected, ventilated and Excitation and static regulation - without rings or brushes. 820 KVA - 656 KW - Cos. 0.8 - continuous duty + 10% emergency duty 400 Volts neutral out 50 HZ Machine maintained, maintenance invoices, last maintenance January 2024. Certificates oil analysis diagnosis OK Price including self-supporting INOX chimney Price excl. tax, truck-loaded

Condition: new, Year of construction: 2024, machine/vehicle number: MA0172, new KAESER EPC 630-250 St piston compressor - 10 bar with horizontal lacquered 250 litre container Year: 2024 2 cylinders max pressure: 10 bar Rated power: 3.0 kW Dusb Hbpwoity Dqswot Volume flow at 6 bar : 410 l/min Volume flow at 8 bar : 375 l/min Sound level: 75 dB(A) Compressed air output: 1/2" Dimensions length x width x height: 650 x 700 x 1810 mm Weight: 150 kg Visit our shop. We always have a wide range of new and used compressors on hand!

Condition: refurbished (used), Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 1102-073, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 4,000 mm, workpiece weight (max.): 6,000 kg, Condition: completely overhauled and modernized in 2020, comprehensively revitalized in November 2024 Guarantee: 3 months (material, spare parts, electronics) No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Turning length: 4,000 mm Turning diameter over bed: 800 mm Turning diameter over slide: 530 mm Turning diameter over top slide: 530 mm Spindle Spindle bore: 95 mm Spindle mount: MK 6 Workpiece weight Max. between centers: 6,000 kg Max. with 1 steady rest: 7,500 kg Max. with 2 steady rests: 9,000 kg MACHINE DETAILS Total length: 6,500 mm Total width: 1,500 mm Total height: 1,500 mm EQUIPMENT - Digital Read Out (DRO) with 3 axes and display - Steady rest (Ø 0-400 mm) with rollers Dujb Hbpwjvryhmowjt - 4-jaw chuck (800 mm, BISON) - Universal Multifix tool holder - Tailstock - Cooling pump - Chuck protection cover

Condition: good (used), Year of construction: 2006, Functionality: fully functional, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld Dobouthz Ts Hbpwwsut - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Drive type: Electric Load capacity: 5,000 kg Mast type: Triplex Lifting height: 4,700 mm Dusb Hbpjtqnb Dowwet Fork length: 1,200 mm Free lift: 1,500 mm Overall height: 2,340 mm Front tires: Superelastic Rear tires: Superelastic Battery: 2024, 80V, 930Ah EQUIPMENT - Sideshift - 3rd valve - 4th valve - Full free lift - Forward and reverse switch on the lever - Fully suspended driver's seat - Panoramic mirror - LED lighting

Condition: new, Year of construction: 2024, Interbake V-MIX 80 planetary mixer 80 liter with 2 bowls. The very solid construction of the device allows you to work with cakes and masses in the baking and confectionery industry. Thanks to the mechanical system of lifting and lowering the bowl, it is possible to work continuously without removing the tool. The innovative solution of the gearbox allowed for multiplication of the torque, which translates into higher efficiency with lower energy consumption. A very precise arrangement between the tool and the cauldron allows you to knead small amounts of masses, creams, cakes. Available in 60,80,100 and 120 liter digital control panel Duobou S Axps Hbpwwet stepless regulation - frequency inverter control programming 20 mix recipes programming the time of mixing automatic lifting of the bowl 3 tools included: dough hook wire whip flat beater year of build 2024 new

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Dujb Hstqnaxjbpwwet Drive type: Electric Load capacity: 3500 kg Mast type: Triplex Lifting height: 4700 mm Fork length: 1200 mm Front tires: Superelastic Rear tires: Superelastic Battery: 2024, 80V, 620Ah EQUIPMENT Sideshift 3rd valve 4th valve Full free lift Forward and reverse switch on the lever Fully suspended driver's seat Panoramic mirror LED lighting