Used Schaffer 9380 T for sale (13,103)

Condition: new, overall weight: 38,000 kg, maximum load weight: 25,600 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * Gooseneck Light, length approx. 4,080 mm * Gooseneck can be raised/lowered hydraulically and moved away * For tractor units: 4 x 2 and 6 x 2 Low bed * Low bed designed as a telescopic excavator bridge with extension at the front and with mechanical locking. Length x width approx. 6,350 mm x 1,300 mm Rear chassis * Rear chassis in short version with closed outer frame and checker plate cover with excavator trough, this is closed in the rear half to accommodate the air tanks Axles and suspension * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Axle tool Tires * 235/75 R 17.5 3PMSF twin tires * Load index 143/141J (144/144F) Brake system * WABCO EBS-E brake system in accordance with EU regulations * Without connection cable to the tractor unit Paintwork * 6-K final treatment * Complete steel construction after welding shot blasted * 1 layer of zinc-based base paint, 1 layer of adhesion primer * Final coat with 2 layers of 2-component paint (acrylic) in single color RAL 3002 carmine red, then sealing of the cavities with special wax. Rims in silver Accessories included * Steel bulkhead, pluggable, approx. 400 mm high * Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches * 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) * 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the bulkhead and at the rear on the gooseneck * 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck * On the gooseneck 2 pairs of pluggable ALU side walls, approx. 400 mm high, in anodized design * On the gooseneck a pluggable aluminum back wall, approx. 400 mm high, in anodized design * Above the gooseneck approx. 12 mm thick Delignit coating * 2 inch kingpin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air pistol on the gooseneck * Possibility to climb onto the gooseneck * 2 pairs of stake pockets embedded on the gooseneck, for stakes approx. 100 x 100 mm * On the inner tube on the outside, threaded holes for mounting screwable lashing rings M24 (LC 8,000 daN) * 2 pairs of screwable lashing rings M24 (LC 8,000 daN) included * On the upper belt on the outside approx. every 1,200 mm, attachment option ø26 mm for screw rings (LC 8,000 daN) * 10 pairs of lashing rings on the RBS-5 outer beam (LC 10,000 daN), under and between the extensions * Foldable, extendable extensions, lockable at approx. 2,550/2,750/3,000 mm, split-design wooden mattresses, with wooden flooring * Bevel at the front of the chassis, approx. 350 mm x 12°, including integrated hanging rails at the front and rear for loose docking ramps * 2 pairs of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * 3 pairs of recessed lashing rings in the outer frame of the chassis, foldable outwards: 1 pair each at the front and rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) * 2 pairs of LBS-3 lashing rings (LC 6,000 daN) welded above the wheel arch on the rear chassis Dueb Hhvorympps Sust * S

Condition: used, mileage: 212,811 km, power: 310 kW (421.48 HP), first registration: 02/2021, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, loading space volume: 33 m³, loading space width: 2,480 mm, loading space length: 6,153 mm, loading space height: 2,163 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, ACTROS 1842 L box 6.15 m with tail lift 1.5 ton. + ZAA-AHK * Vehicle no. for customer inquiries: 4193 * Predictive Powertrain Control * Turning assistant * Rear axle differential lock * Air conditioning * Engine version Euro VI, D * Navigation system * Lane keeping assistant * Tail lift * Trailer coupling comfort, D40, ring spring * Light sensor * Air suspension, rear axle * Multimedia cockpit, interactive * Rain sensor * Stability control assistant (ESP) * Hot water auxiliary heating, driver's cab * Active Brake Assist 5 * Trailer brake, 2-line, brake connections on the left * Electronic braking system with ABS and ASR * Driver's suspension seat, comfort * Parking brake, electronic * Gearbox G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Engine brake, standard system * Particle filter * Locking system, with central locking * Tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Preparation for Mercedes-Benz Truck App Portal * Storage compartment, high, on engine tunnel * AdBlue tank 60 l, left * Trailer socket 24 V, 15-pin * Roof hatch/roof ventilation flap * Heating, electronic compressed air supply unit * M-cab ClassicSpace, 2.30 m, tunnel 170 mm * Engine OM471, R6, 12.8 l, 310 kW (421 hp), 2100 Nm * Wheelbase 4600 mm * Tubeless tires, 315/70 R 22.5 HA * Tubeless tires, 385/65 R 22.5 VA/VLA/NLA * Stabilizer, front axle Duobsv Arb Te Hhv Sujt * Preparation for toll collection * Actros S/M cab * Attention assistant * Weight variant 18.0 t (8.0/11.5) * Steering oil cooling * Fan position, on crankshaft * Digital tachograph, 2nd generation, ADR * Traffic sign assistant * Requires FleetBoard Manager app * Environmental sticker (green) * Service booklet maintained * Two-seater * 2/3 doors No liability for printing and spelling errors Sale only to traders Subject to errors and prior sale* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to make you a LEASING-FINANCE-LEATHER PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV LBW / speedometer inspection and installation of OBU device by our local partners * Customs license plate for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL/TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * always over 150 vehicles in stock

Condition: used, mileage: 180,441 km, power: 55 kW (74.78 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 2,810 kg, empty load weight: 1,724 kg, maximum load weight: 1,086 kg, first registration: 10/1997, next inspection (TÜV): 09/2023, emission class: euro2, color: red, suspension: other, number of seats: 9, total length: 5,107 mm, Equipment: ABS, had accident, trailer coupling, Vehicle has rust damage, non-binding offer - subject to change and prior sale - sale is subject to exclusion of any warranty - all information without guarantee! Dusb Hovidwashv Sust

Condition: new, Wide span shelving, new Dimensions: L 2050 x H 3000 x D 800 mm incl. 4 shelves Shelf load: ~ 300 kg with evenly distributed load Dueb Hscfbyhohv Suot #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelf uprights, 800x3000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. locking pins 4x insert shelves approx. 1930x745mm, Thickness: 22 mm

Condition: new, overall weight: 59,000 kg, maximum load weight: 41,600 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Gooseneck * in SNT design to optimize the loading area length, length approx. 3,750 mm * Gooseneck can be raised/lowered hydraulically and removed * Technical fifth wheel load: 34,000 kg. For tractor unit: 6 x 4 or 8 x 4 (or 6 x 4 with 1-axle dolly 235/75-17.5) Low bed * designed as a telescopic tank bridge in low construction, with extension at the front and mechanical locking * Length x width approx. 7,550 mm x 2,740 mm Chassis * with closed outer frame at the rear * Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Brake system * WABCO EBS-E brand in accordance with EU regulations Axles and suspensions * PENDEL-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Technical axle load: 12,000 kg each * Hydraulic Axle compensation Tires PA * 245/70 R 17.5 3PMSF * Load index 143/141L(146/146F) Paintwork, color of the trailer * RAL 3002 carmine red Accessories included * Steel bulkhead, pluggable, approx. 400 mm high * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) Dob Hhveuzdf So Sueut * 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches * Outer support of the gooseneck with mounting holes for screwable lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screwable lashing rings included (LC 5,000 daN) * 1 lashing ring on the left and right on the rear bevel of the gooseneck (LC 10,000 daN) * Checkered sheet metal covering above the gooseneck * 3.5 inch king pin * Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * 1 pair of steel ramps with climbing rails and fastening bolts to bridge the hooks of the low bed * Fastening option for the steel ramps at the rear between the outer supports of the gooseneck * 1 lashing ring on the left and right on the front cross member (LC 10,000 daN) * 6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 (LC 8,000 daN) * 2 pairs of screw rings M24 (LC 8,000 daN) Other accessories included * 6 pairs of recessed lashing rings on the outside of the outer supports of the loading area, inwards and foldable on the outside (LC 10,000 daN) * 1 pair of threaded blocks at the front and rear on the outer supports of the loading area for mounting screwable rings M24 (LC 8,000 daN) * 1 pair of screw rings M24 (LC 8,000 daN) included * Preparation for mounting screwable container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locks * Mechanical bolt-tab coupling from the low bed to the chassis, for changing the loading area or installing extension supports * With electro-pneumatic-hydraulic couplings * Hanging bar at the front of the rear chassis to the low bed for loose docking ramps * 4 pairs of lashing rings hanging in the outer frame of the rear chassis (LC 10,000 daN) * 1 pair of lashing rings lying at the front in the excavator trough of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying in the excavator trough in the area of the 2nd axle of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying at the rear in the excavator trough of the rear chassis (LC 10,00

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used material color: blue Dob Hshm Stzjhv Suout frame profile: 76.2 - 100 mm stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: orange box profile: 85 x 40 mm type of truss: GN85x41mm clear width: 2.775 mm 08x safety pins, used finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.980 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.755 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: new, overall weight: 43,000 kg, maximum load weight: 30,235 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Extract from the equipment * Chassis with excavator trough * Low bed with central carrier in extendable version, length approx. 6,000 mm Gooseneck * Hydraulically raised/lowered, and can be driven off Dsb Hhjrirzqov Susut Axles * BPW axles * Hydro-mechanically forced steering Brake system * Wabco in accordance with EU regulations with EBS-E (2S2M) Air suspension * With raising and lowering valve Tires * 245/70 R 17.5 3PMSF load index (146/146F) Incl. accessories * 2 inch kingpins * 1 pair 1pc. Steel ramps for forestry machines, approx. 2,000 x 700 mm, with hydraulic lifting mechanism * A galvanized steel front wall, approx. 400 mm high * Steering can be operated from the front and rear using a cable remote control via push buttons * Electro-hydraulic unit * Load pressure gauge for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approx. 2,440 x 400 mm (L x H) * Hydraulic connections from the gooseneck to the low bed with multi-coupling * 1 pair of galvanized steel docking ramps with climbing strips from the low bed to the chassis * A painted layer of sand on the loading area as anti-slip protection * 2 LED reversing lights mounted on the rear panel * Central lubrication system with 2 BEKAMAX (Pico) pumps * An acoustic warning signal when reversing Painting * HRM metallization (High Resistance Metallisation) * Single-colour paintwork in MB 7350 nova grey

Condition: new, Year of construction: 2024, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the shelf trolley: Manufacturer: LPR Type: 600 Dusb Hhvjdb N Hmo Sust 01x Shelf trolley, new Material color: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Consisting of each: 02x shelf uprights, new Material color: blue Frame profile dimensions: 50 x 50 mm incl. cross and diagonal braces, metal base plates, plastic Cover caps The stands are pre-assembled (bolted framework) 2,000 mm high 600 mm deep 06x workbench crossbars, new Material color: orange Design: stepped crossbar Clear width: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x safety pins, new To secure the length supports against unintentional lifting out 03 x insertion sockets, second choice used Thickness: 22 mm Dimension: 1,430 x 545 mm 02x double-stop swivel castors, new 02x swivel castors, new 08x machine screws: M8 x 20 mm 08x Nuts: M8 08x washers: The pictures serve to illustrate the material. The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. Our services at a glance: (Prices on request) - Assembly and installation Our general assembly conditions must be observed - Shelf inspection Rack inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all racking systems - Delivery with our own fleet of vehicles (without unloading)

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled Duob Hehq Txhjhv Suet (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, shelf height: 2,500 mm, Wide span shelving, new dimensions: L 2550 x H 2500 x D 800 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2500mm Dobjcfby Ts Hhv Sujut unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2430x745mm, thickness: 22 mm

Condition: new, Wide span shelving, new dimensions: L 2550 x H 2000 x D 600 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2000mm unassembled, incl. cross and diagonal braces, plastic base plates Duob Hhvocfb Ale Sujt 8x crossbars 2450mm, incl. safety pins 4x shelves 2440x545mm, thickness: 22 mm

Condition: good (used), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench rack of the manufacturer Vogelsang for sale. Technical data of the workbench frame: Manufacturer: Vogelsang Type: NS The scope of delivery includes: 02x workbench stand, new Material color: sendz. galvanized stand height: 900 mm Dujb Hehm Sr Dohv Sust stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: orange box profile: 110 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame Dusbohm Sr Ss Hhv Suet of the manufacturer Vogelsang for sale. Technical data of the workbench frame: Manufacturer: Vogelsang Type: NS The scope of delivery includes: 02x workbench stand, new Material color: sendz. galvanized stand height: 900 mm stand depth: 1.000 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: orange box profile: 110 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D Duobshq Twyj Hhv Sujt 01x Angle set, new for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black Duob Hhshq Txwsv Sujt 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new for mounting the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, Wide span rack, new dimensions: L 2050 x H 3000 x D 600 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x3000mm unassembled, incl. cross and diagonal braces, plastic base plates Dsb Hjcfbx Ijhv Susut 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, thickness: 22 mm

Condition: new, Wide span rack, new dimensions: L 2050 x H 2500 x D 800 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2500mm Duob Hhv Socfby Rsujt unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x745mm, thickness: 22-25 mm

Condition: new, Wide span shelving, new dimensions: L 2050 x H 2000 x D 600 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load Duob Hhvocfb Abj Suet #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, thickness: 22 mm

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 Dujbjhq Tqde Hhv Sust incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, - Basic shelf - wide span shelving, new dimensions: L 2050 x H 2500 x D 600 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, Dusb Hhvjcfbzfj Suet thickness: 22 mm

Condition: new, Wide span shelving, new dimensions: L 2050 x H 2000 x D 800 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: Dob Hhvecfbzys Suout 2x shelf uprights, 800x2000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x745 mm, thickness: 22 mm

Condition: new, Wide span shelving, new dimensions: L 2550 x H 3000 x D 600 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x3000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. safety pins Duob Hscfb Axehv Sujt 4x shelves 2440x549mm, thickness: 22 mm

Condition: new, Wide span shelving, new dimensions: L 2550 x H 2000 x D 800 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2000mm unassembled, incl. cross and diagonal braces, Dueb Hhecfb Apsv Sujt plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2430x745mm, thickness: 22 mm

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer here a used workbench of the manufacturer Jung Heinrich for sale. Dsbehm Stls Hhv Sueut Included in delivery are: 02x workbench stand, used material color: blue frame profile: 76.2 - 100 mm stand height: 900 mm stand depth: 800 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: orange box profile: 85 x 40 mm type of truss: GN85x41mm clear width: 2.775 mm 08x safety pins, used finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.980 mm depth chipboard: 800 mm Surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 - 46 mm width chipboard: 2.755 mm depth chipboard: 800 mm Surface: coated if necessary (two-part if necessary) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: new, Wide span shelving, new Dimensions: L 2550 x H 3000 x D 800 mm incl. 4 shelves Shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelf uprights, 800x3000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. locking pins Djb Hhv Secfbyzeusut 4x shelves 2430x745mm, Thickness: 22 mm