Used Hitachi Ex35-2 for sale (143)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 450 mm, TECHNICAL DETAILS Travel Paths X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Njdpfjw A Rtmsx Ah Nswp Spindle and Tool Tool holder: ISO 40 Number of tool positions in magazine: 30 Spindle speeds – stepless: 0 – 12,000 rpm Table Pallet size: 1,000 x 450 mm Feeds Feed rate stepless: 0 – 30,000 mm/min Rapid traverse: 30 m/min Control: Fanuc 18 M MACHINE DETAILS Electrical Data Total connected load: 32 kVA Total power requirement: 15 kW Dimensions & Weight Machine weight approx.: 6.5 t Required floor space approx.: 3.5 x 2.5 x 2.4 m

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * IFM display (immobilizer, function switching) * Arm 1,300mm * 300mm rubber tracks * Operating weight 2,720kg * Engine power 15.6 kW * Yanmar 3TNV70 engine EU Stage V Njdpoxazy Aofx Ah Newp * AM/FM radio * Mechanical quick coupler MS03 * 2 x digging buckets (300mm and 600mm) * 1 x hydraulic ditch cleaning bucket (1,200mm)

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 580 mm z-travel 580 mm control SEICOS 16M B-axis (table) 360 x 1° mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min turning speed range - stepless 35 - 12.000 Nm spindle drive 22,00 kW max. torque on the spindle 236 tool taper BT40 toolpiece magazine: chain magazine 61 Stück size of pallet 2x 400x400 mm max. workpiece diameter 630 mm workpiece height max. 680 mm Nwodpfx Ahew A Amfe Nsp workpiece weight max. 400 kg total power requirement 30,00 kW weight of the machine ca. 12,00 t dimensions of the machine ca. 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.

Condition: repair required (used), functionality: limited functionality, A used Ink Jet Printer suitable for parts or repair - unit does power up - see error messages in the pictures attached Nedpfx Aet Amk Eoh Nowp

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter Drive Controller Combivert Nedpfxjt Sbagj Ah Nowp -Type: SJ200-005NFE2 -Power: 0.55 kW -Number: 1x frequency converter available -Dimensions: 120/80/H130 mm -Weight: 0.8 kg

Condition: ready for operation (used), Hitachi Seiki tool turret 5-fold , Ø 50 cm , mounting plate: 235 x 345 mm , Ø hole for tool holders: 40 mm ,used, normal signs of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nodpoi Ea Nmjfx Ah Nowp

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. 1. Headstock with chuck. 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions. Nsdpfx Ahswf Afto Newp

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * P-Line (fully hydraulic rotary quick coupler with OQ40-5 mount) * 300mm rubber track * 1,720mm arm * complete piping * Overload warning system * Engine power 18.8 kW Nwedpfx Ahsxazvds Njp * Operating weight 4,040 kg * 2 x digging buckets (300mm and 500mm) and 1 x hydraulic ditch cleaning bucket

Condition: used, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Technical condition: New Njdpfx Ajumy Avsh Nowp Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, pallet forks

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, bar diameter (max.): 42 mm, TECHNICAL DETAILS Bar capacity: 42 mm Turret: 16 positions, driven Tool holder: VDI 30 MACHINE DETAILS Control: Seicos EQUIPMENT Nwodjwtrapjpfx Ah Nep - Tailstock - Tool Eye - Parts catcher - Driven tools

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine Njdpfxedtcrqs Ah Newp -The tool changer comes from CNC machining center make: Hitachi Seiki type: HC400 -Tool changer for: Hitachi Seiki type HC400, other spare parts available. -complete with: gripper arm and drive -Tool changing positions: 80 -Intake: SK40 -Dimensions: 2270/630/H1725 mm -Town weight: 860 kg

Condition: used, color: blue, Year of construction: 1992, operating hours: 12,029 h, Mast: lattice Mast length: 2.800 cm Serial number: 222-1064 Delivery terms: EXW Production country: JP Please contact Christiaan Dekker for more information Hitachi KH125-3 Nodpevkd Twjfx Ah Nowp Year: 1992 Hours: 12028 Lifting computer 28 meter boom Lifting block Winch with free-fall

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: VM43182E, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel distances x-axis: 560 mm y-axis: 450 mm z-axis: 450 mm Nsdpfswm I N Tox Ah Njwp Table Table surface: 760 x 410 mm Spindle Speed range: 8,000 rpm Dimensions Dimensions: 2.16 x 2.32 x 2.37 m

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Year of manufacture: 2025 * Yanmar low-emission engine 3TNV88 with Stage V (TIER 5) – output 18.0 kW (24.6 HP) * Operating weight: 3,720 kg * 300 mm rubber tracks * Monoblock boom * Arm 1,520 mm * Dozer blade * Fully piped/hydraulic lines fitted * Boom cylinder with load-holding valve and overload warning device * Arm cylinder with load-holding valve Nwjdoxazpkjpfx Ah Nsp * Mechanical quick coupler MS03 * 2 x digging buckets 300 mm and 600 mm * 1 x hydraulic grading bucket 1,200 mm * 3 years warranty

Condition: used, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Technical condition: New Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Nwjdpfsumy Apsx Ah Nsp Bulk material bucket, pallet forks

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 500mm/450mm/400mm, tool holder: CAT50, table size X/Y: 900mm/410mm, max. table load: 350kg, speed: 8000rpm, feed X/Y/Z: 15000mm/min, rapid traverse X/Y/Z: 30000mm/min, number of tools: 20, dimensions X/Y/Z: approx. 2200mm/3200mm/2500mm, weight: approx. 5000kg, control: Seicos A10M. Nedpjtufb Sofx Ah Nowp

Condition: used, Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer Nodpsir E Sysfx Ah Newp -Manufacturer: Hitachi, rotary hammer type DH 25V with carrying case -Rated consumption: 600 W -Drilling/impact drilling -Speed: 0 - 800 rpm -Drilling capacity: steel 13 mm / concrete 25 mm -Dimensions case: 445/340/H170 mm -Weight: 10.3 kg

Condition: excellent (used), Year of construction: 2005, Field of application: Construction Technical condition: very good Visual appearance: very good Delivery terms: EXW Please contact Christiaan Dekker for more information Boom section 9 meter Nodpfxetz Sq Ie Ah Njwp 3 Pieces available including ropes Price Euro. 7.500,- /each

Condition: used, Year of construction: 2013, operating hours: 2,383 h, Mini excavator Hitachi, * Type ZX22U-2CLR, * Year of manufacture 2013, * Operating hours 2383lt. Meter read, (Please check as still in use) * Drive via 3 cylinder Yanmar diesel engine with 14.6 KW / 20 HP water-cooled, * 2 gears, * Single cabin with 1 seat, * Overall dimensions in length x width x height 3800 x 1460 x 2500 mm, * Weight 2360 kg + 180 kg additional weight, * Blade support, hammer and grapple line, * Dipper stick 1300 mm, * Undercarriage length x width 183 x 250, 70% good, * GRL 120 wide, with power tilt, quick coupler, MS 03 Nwjdpfx Ahoq I Hndo Nep More detailed information and more pictures available on request, this description does not represent a binding offer and may contain errors, no guarantee for all information

Condition: used, fuel type: diesel, first registration: 07/2015, Year of construction: 2015, operating hours: 3,600 h, 3600 operating hours – Hitachi ZX65USB-5A CLR crawler excavator – grading blade – additional piping for hammer and rotation – year 2015 – total weight 6160 kg = Further Information = Model year: 2015 Unladen weight: 6,160 kg Nwedsw E Di Topfx Ah Njp Reference number: 36 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), Year of construction: 2002, A 3-axis horizontal machining center with approx. 150 additional tools. Tool magazine SK40: 61 places. Travel X/Y/Z: 600mm/580mm/580mm, max. tool size: 400mm x 400mm, max. tool weight: 400kg. Power: 35-12000rpm, rapid traverse X/Y/Z: 50m/min, feed speed: 1-50000mm/min. Dimensions X/Y/Z: approx. 4000mm/3700mm/2900mm, weight: approx. 400kg. Operating time: 73,974h, machining time: 25,714h, machining cutting hours: 21,591h. Cabinets for tools can also be handed in. Documentation available. Nsder Ezitspfx Ah Newp

Condition: used, Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal consumption: 620 W. -Mains connection: 230 V -Drill -div. drill -Suitcase -Weight: 5.5 kg Nwsdpfx Aob A Hxush Nop

Condition: used, Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm Nsdpfx Ahedwc I So Njwp -Weight: 0.6 kg

Condition: used, Hitachi starter -Voltage: 12V -Type: S114-443 -Teeth: 8 -Weight: 5 kg Nwjdpfxeb A R Utj Ah Nop

Condition: used, PLC, control panel, operator panel, control machine -The front of the control panel comes from: a Hitachi Seiki type HC400 machining center -Manufacturer: Hitachi Seiki -Control: FANUC -Dimensions: 400/310/H100 mm Nwjdpodryd Eofx Ah Njp -Weight: 3.8 kg