Used Tos Fn32 for sale (8,170)

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, Functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg Cob Haev Uh Ndsnyzsgt - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: good (used), vibratory conveyor, vibratory feeder, vibratory feeding device, feeding device, spiral conveyor, vibratory filler, vibratory spiral conveyor, vibratory doser, spiral conveyor Ceb Hansvvtbzsyzegt -Handover: in current condition as viewed -Condition: without control, see photos -Screw conveyor: Vibration conveyor -Type: unfortunately without type designation -Connection: 230 volts -Transport dimensions: 460/300/H325 mm -Weight: 33.1 kg

Condition: used, Year of construction: 1998, operating hours: 13,258 h, 1998 | Liebherr | Liebherr L 522 with High-Tipping Bucket | Used Wheel Loader | 13258 hours 📍Location: Germany, Stuttgart 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 18500 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheel loader Liebherr L522 with high dump bucket. the condition of the machine corresponds to the value of the operating hours. leakage hydraulic oil on one of the two chassis motors. at the time of inspection, the machine ran / functioned without any other abnormalities. the machine shows wear on bolts and bushings corresponding to the age and mileage and the purpose of use, as well as signs of use (dents, abrasions, etc.) and corrosion. the machine has not been tested under load. well maintained and serviced machine. ready for immediate use. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "32949 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery Csb Hanyswg Snyozjgt ❓Got machines to sell? Contact us for a free evaluation

Condition: good (used), mileage: 266,200 km, power: 345 kW (469.07 HP), first registration: 10/2013, fuel type: diesel, color: silver, axle configuration: 6x2, tire size: 385/65R22,5, fuel: diesel, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, Year of construction: 2013, Equipment: air conditioning, crane, cruise control, parking heater, sleeping cabin, - Aluminum fuel tank - Brake booster - Electronic Braking System (EBS) - High beams - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Fog lights - Reversing camera - Sleeping cabin - Power steering - Sunshade - Auxiliary heating - Toolbox - Xenon lights - Power take-off (PTO) 1x Volvo FH460, 6x2*4, Euro 6, 266,200 km, i-Shift, KART 7m3, 2013, 9-meter slide and mixer are remotely controlled, Gross vehicle weight: 27,000 kg, Air conditioning, Rear view camera, Suspension: Steel/air, ABS, First registered October 14, 2013, Year of manufacture: June 2013, Webasto (auxiliary heating), Tires: front 385/65/22.5 at 90% and rear 315/80/22.5 at 80%, electric windows, radio/CD player, total length: 8300mm, total truck width: 2550mm, total truck height: 3900mm, distance between 1st and 2nd axle: 3900mm, properly and timely serviced, 330-liter aluminum fuel tank, first owner! ...Truck, mixer, and chute are in good and working condition! Price: € Stockholm, Sweden For further information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * We speak Swedish * We speak Polish * We speak Spanish * • We speak Ukrainian * We speak Russian * We speak Romanian * We speak German * .----- * Shipping costs for this truck to various destinations * ----- * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 Cjb Haewgpb Djnyzjgt * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only to the purchase of this truck. * -----. _____ _____ General Information Usable Material: Concrete Technical Information Engine Displacement: 12,777 cc Curb Weight: 12,700 kg Drivetrain AdBlue System: Yes Fuel Tank: 330 liters Transmission Transmission: i-Shift Axle Configuration Brakes: Disc Brakes Front Axle: Tire Size: 385/65R22.5; Steered; Left Tire Profile: 90%; Right Tire Profile: 90%; Suspension: Leaf Spring Rear Axle 1: Tire Size: 315/80R22.5; Twin Tires; Tire profile left inside: 80%; Tire profile left outside: 80%; Tire profile right inside: 80%; Tire profile right outside: ...

Condition: used, Year of construction: 2008, operating hours: 38,800 h, Functionality: fully functional, Macpresse MAC 111 / 1 baler, pressing force 170 t, built in 2008 Technical specifications: Manufacturer: Macpresse International S.R.L., Milan, Italy Type: MAC 111 / 1 Year of manufacture: 2008 Operating hours: 38,751 as of March Pressing force: 170 t Drive power: 2 x 55 kW Mains voltage: 400 V / 50 Hz Filling opening: 1,800 x 1,020 mm Press chamber volume: 2.7 m³ Ceb Hajwgkfdjnyzjgt Bale size: 1,100 x 1,100 mm (H x W) Throughput / mixed paper: 30–35 t/h Binding: 5-fold horizontal Transport dimensions: approx. 11,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 39,000 kg Accessories: Hopper, turbulator Note: The press is expected to be in operation until May 16, 2025, and can be inspected in operation upon request. The conveyor belt shown in the photos is not included in the scope of delivery. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by arrangement. Sales against advance payment are ex works, without warranty or guarantee.

Condition: like new (used), Year of construction: 2021, Striebig Standard S 6224 - TRK1 Comfort vertical panel saw with scoring unit, strain gauge, and in mint condition Sliding table length approx. 5300 mm Cutting height approx. 2240 mm vertically and 2100 mm horizontally Max. cutting height 80 mm Saw blade bore 30 mm Saw blade diameter up to 303 mm Drive motor 4.4 kW (S1) VSA scoring unit continuously adjustable Sliding wooden slatted frame, TRK1 Comfort package with pneumatic clamping of the motor carriage, digital measuring system in the Y direction, pneumatically braked support rollers, and laser in the horizontal direction Digital measuring system in the X direction Cgsb Hev Su Nfeanyzjt Aluminum small part support Wall mounting Extraction nozzle 140 mm Emergency stop switch Operating manual CE mark Original condition, extremely little used, see photos. Machine is assembled and ready for demonstration. Dimensions approx. 6630 x 1390 x 3060 mm (L x W x H). Weight approx. 1000 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration. See "Other offers from this supplier."

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Walter Helitronic CNC tool grinding machine Grinding profile machine Manufacturer [manufacturer]: Walter Type [ type]: Helitronic Steuerung [control unit]: HMC 500 (Bosch Intramad controller) Incl. handwheel Year of construction: 10/2001 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle: swiveling +-90˚ Feed speed: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force: 10,000-15000N Grinding spindle motor power: 24 kW Tool holder: SK 50 according to DIN2080 Weight: 7,000kg Space required [needed space ]approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories as per photos Complete documentation is available. Cgsb Hasu Rqw Tsnyzst Viewing under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: good (used), screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Schneider, screw compressor type Airmaster AM7 -Volume flow: 1.12 m³/min -Engine power: 7.5 kW -Operating hours: 6469 h -max. pressure: 8 bar Cgob Hanyjvw A Rbszst -Individual components: see photos -Dimensions: 710/700/H1000 mm -Weight: 186 kg

Condition: used, Year of construction: 2007, 2007 | Holland-Lift | Holland-Lift Q 135 El 24 (15m) | Used Scissor Lift 📍Location: Estonia, Tallinn 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 8900 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 26 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The hourmeter is broken, and the protection plate near the drive motor is bent. The drive motor is in good condition, and all operations work, except the lifting leveling sensor, which occasionally malfunctions. The customer defrosted the remote and charged the batteries before the inspection. Ceb Haowhgyaonyzegt ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38110 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: good (used), mileage: 217,000 km, power: 248 kW (337.19 HP), first registration: 07/2014, fuel type: diesel, color: green, axle configuration: 6x2, tire size: 385/65 R22,5, fuel: diesel, wheelbase: 3,700 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: air conditioning, cruise control, fog lights, parking heater, - Aluminum fuel tank - Brake booster Cgsb Hanjwgnu Ajyzjt - Electronic braking system (EBS) - High beam - Air conditioning - Reversing camera - Power steering - Sunshade - Auxiliary heating - Xenon lighting - Power take-off (PTO) *1x Volvo FM330, 6x2*4, Euro 6, Gearbox: Automatic, 3rd axle is steered, 2-chamber JOAB garbage truck, RHD, 2014*, Mileage 217,000km, 2x reversing cameras, First registered: 16.07.2014, Year of manufacture: 04.2014, Suspension: Front steel / rear air, ABS, Webasto, Distance between 1st and 2nd axle; 3700mm, Total truck length: 8100mm, Total truck height: 3650mm, Tires: front 385/65/22.5 at 60% and rear 315/80/22.5 at 60%, air conditioning, stereo, electric windows, electric mirrors, comfortable driver's seat, heated driver's seat, sunroof, aluminum fuel tank with 210 liters, sanding units on each side, always properly and punctually maintained, last technical inspection (MOT) at 216,800 km (19.08.2024), 1 owner since new purchase... in good and fully functional condition!!! *Price:* €Stockholm, Sweden For more information and photos contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 € * Gothenburg (Sweden) – Leixoes (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices are only valid for the purchase of this truck * -----. _____ _____ Front axle: Tire size: 385/65 R22.5; Steered; Tire profile left: 60%; Tire profile right: 60%; Suspension: leaf spring Rear axle 1: Tire size: 315/80 R22.5; Double tires; Tire profile left inside: 60%; Tire profile left outside: 60%; Tire profile right inside: 60%; Tire profile right outside: 60%; Suspension: air suspension Rear axle 2: Tire size: 385/65 R22.5; Lift axle; Steered; Tire profile left: 60%; Tire profile right: 60%; Suspension: air suspension Engine displacement: 10,837 cc APK (technical main inspection): tested until 06.2025 Technical...

Condition: ready for operation (used), Baldor BSM1R-0.2-40-B5 servo motor. 16724A, SN: BCDBMA1969 + Gysin GPL 52-2S / 25:1 planetary gear, used, good condition, 100% functional, scope of delivery as per photos Cob Hsm Sxqtoanyzsgt

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Gear grinding machine Gleason Pfauter G320 CNC + Promot Automation - Gear grinding machine Manufacturer: Gleason Pfauter G320 + with Promot Automation handling unit Type: G 320 Control unit: Siemens 840 Incl. control panel Year of construction: 10/2001 Module: 0.5-7.0 Min. workpiece diameter: 10 mm Max. workpiece diameter: 380 mm Number of teeth: 10-600 Vertical slide stroke “Z“: 200 mm Horizontal slide stroke “X“: 230 mm Tangential slide stroke (SHIFTING) “Y“: 135 mm Swivel angle of clamping head “A“: +-45° Stroke – tailstock center [ ]: 125mm Tangential slide stroke – dressing [ ]: “V“ 180mm Radial slide stroke – dressing [ ]: “U“ 110mm Rotation speed – grinding wheel in processing [ ]: 3000rpm max - infinitely variable Edge speed – linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RPM Table resolution [ ]: 0.001° Processing feeds [ ]: infinitely variable Working feeds [ ]: infinitely variable Grinding wheel dimensions Min/Max. diameter [ ]: 270/350mm Width [ ]: 104mm/max. Cgebsu Sqgqj Hanyzet Bore [ ]: 160mm System weight [weight]: 11,500kg Accessories [accessories]: as per photos +Promot-Automation +Conveyor belt +Cooling belt system +Hydraulic unit Space requirement for machine [needed space ]approx. (W x D x H): 3.7m x 2.4m x 2.75m Space requirement for Promot Automation [needed space ]approx. (W x D x H): 4.5m x 1.6m x 4.0m Complete documentation is available. Functionality and machine features: Cylinder grinding machine with 8 numerically controlled axes for machining gears with straight and helical gears that can be produced by rolling, including a dressable worm profile disk. Linear and rotary main axes are designed to be hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex warehouse here plus VAT Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: good (used), Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm -Roll: Ø 150 x 160 mm -Individual components: see photos -Transport dimensions: 830/690/H360 mm -Weight: 144 kg Cgob Hajvzqc Hjnyzst

Condition: used, Year of construction: 2012, operating hours: 3,005 h, 2012 | Haulotte | Haulotte HA120 PX (12m) | Used Articulated Boom Lift | 3005 hours Cgsb Howgr Igjanyzjt 📍Location: France, Noyelles-Godault 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 12800 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 46 inspection points 41 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating machine. Significant rust present on the boom and chassis. The machine had a major hydraulic oil leak, which has been repaired, but the area has not been cleaned. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38854 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: new, GMN HSP 150g16000/9 HF - high-speed spindle 10140529 / 1001079 / 0/03.90855.120 for Schaudt Mikrosa, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cob Hanysnkqzmozsgt

Year of construction: 1970, Condition: good (used), Keyseating machine, keyway broaching machine, keyway broaching tool, broaching machine, keyway tool, special tool, keyway tool, keyway machine Cjbovi N D Es Hanyzjgt -Manufacturer: Polymat, keyseating machine type POL-50 with many broaching tools -Broaching tools: Number approx. 210 pieces (3 to 50 mm) -Drive: 5.5 kW -Equipment: Coolant system -incl. accessories: large quantity, see photos -Installation dimensions: 1170/1200/H1330 mm -Transport dimensions: 1170/1200/H1330 mm, 1200/800/H400 mm -Weight: 1930 kg

Condition: used, Year of construction: 2017, operating hours: 6,072 h, 2017 | Caterpillar | Caterpillar M315 with 3 buckets | Used Wheeled Excavator | 6072 hours 📍Location: France, Gimont 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 95000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* Cjb Haswgr H Nonyzjgt 👷‍♂️ Inspected by an independent expert 59 inspection points 53 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in perfect working order. Machine inspected on site. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38399 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type MAC 10x15 A/C TRI -Grain: see photos -Price/tax: complete Ceb Haerxw Ezonyzegt -Transport dimensions: 1200/800/H600 mm -Total weight: 471 kg

Condition: used, Year of construction: 1990, 1990 | Sambron | Sambron BW | Used Site Dumper 📍Location: France, Aups 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 2000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* Cebjwgr H Aj Hanyzegt 👷‍♂️ Inspected by an independent expert 35 inspection points 33 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Working oldskool dumper, all gears function, brakes etc, starts easy with the slingstarter, good Hatz engine, manual tipping dumper, serialplate and year of manufacturing. Cannot be found. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "36253 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2019, operating hours: 6,933 h, 2019 | Caterpillar | Caterpillar 930M High Lift | Used Wheel Loader | 6933 hours 📍Location: Germany, Mönchengladbach 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! Cjb Hswg Ipgjanyzegt 💰 Buy Now for EUR 34500 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 53 inspection points 41 approved ✅ 8 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: The machine had a removed wheel and could not be driven at the time of inspection. Since it was on a stand, the transmission test was not performed properly, but it does engage. There are ongoing repairs by the seller. A lot of aesthetic work is needed, along with some sensor replacements and smaller jobs to be completed. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38426 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2022, operating hours: 572 h, 2022 | Komatsu | Komatsu WA70M-8E0 with bucket and palletfork | Used Wheel Loader | 572 hours 📍Location: Germany, Offenbach am Main 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 44900 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 55 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: No defects found, all functions run through. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37565 Equippo" Cgjbewg Inpj Hanyzjt 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2021, operating hours: 1,725 h, 2021 | Doosan | Doosan DX140LCR-5 with Lehnhoff SW10-3 quickcoupler (without bucket) | Used Tracked Excavator | 1725 hours 📍Location: Germany, Kempten (Allgäu) 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 87500 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 64 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: After maintenance perfect ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37602 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite Cgeb Hajwg Inienyzjt ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2019, operating hours: 514 h, 2019 | Schäffer | Schäffer 2445 SLT | Used Wheel Loader | 514 hours 📍Location: Germany, Friedberg 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 40600 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 53 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ Cgobewg Im Se Hanyzet 📌 Inspector's Comment: ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "32352 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2008, 2008 | Wirtgen | Wirtgen Wr 2400 | Used Asphalt Recycler 📍Location: France, Cagnoncles 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 106000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* Cob Hanyjwgga Rezsgt 👷‍♂️ Inspected by an independent expert 21 inspection points 18 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine was operational, and all functions worked during the inspection. However, the sprayers did not operate as there was no water in the reservoir. The Mercedes engine is in good working condition. The machine has been heavily used, which is visible in certain areas. The deck is getting thin, and there is a significant weld on the main boom. There is a lot of concrete buildup inside the machine, including on the computer, dashboard, and other components. Lubrication is in good condition. There is considerable rust on the cab, and the cab shifting mechanism is not functioning because the cab is out of its rolling rail. The machine requires a thorough cleaning. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38549 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2005, operating hours: 7,863 h, 2005 | Manitou | Manitou 160 Atj (16 meters) | Used Articulated Boom Lift | 7863 hours 📍Location: France, Gannat 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 18000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 47 inspection points 46 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good working condition, with a little play in all joints. The motor was replaced 2000 hours ago. See details below. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37955 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation Ceb Hanewgga Dsyzsgt