Used Atlas 1805M for sale (749)

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 30 - 30 l/s - 1800 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 30 l/s Volume flow 1800 l/min Volume flow 1.8 m³/min Pressure dew point 3 °C Differential pressure 0.25 bar Power consumption 0.41 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 34 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.48 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with fan, condenser pressure regulator Direct refrigerant injection with hot gas bypass valve * Dew point alarm as collective warning (potential-free contact) Cgsbsufp Aujvpvypst * Electronic control unit * Dew point temperature alarm symbol * Message symbol ambient temperature Optionally available * Spin

Condition: excellent (used), Year of construction: 2008, volume flow: 31.2 m³/h, operating pressure: 11 bar, Adsorption dryer ATLAS COPCO CD 520 CE Output 31,20 m3/min, Cebstxrc Hevpvypsgt Year of production 2008 THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Cgjbveq E Iraepvypot Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: used, operation weight: 19,000 kg, Year of construction: 1993, operating hours: 9,000 h, Atlas 1604 LC crawler excavator Year of construction 1993 Cgsbvpvyjr Ddwqspot 9000 operating hours 19000 kg 6 cylinder Deutz engine All lines Quick coupler

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Maximum operating pressure: 10 bar Compressed air production: 192 l/s Power: 75kW Speed: 3000 r/min Weight: 1550kg Cjbvpst Du Syjvypogt

Condition: good (used), Functionality: fully functional, power: 87 kW (118.29 HP), fuel type: diesel, fuel tank capacity: 80 l, overall weight: 8,350 kg, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: CRG108371810-1, Equipment: crane, gripper hydraulics, hydraulics, rubber tracks, Atlas Copco drilling rig MUSTANG 4 - F1 Composed by: DRILL MAST BMI 3.9 HD - New roller type incl. chain feed, hyd. feed motor with gear reducer and neg. brake, Force on the Feed beam 85 kN Feed and retract force on Rotation Head 47 kN Feed length ..... 3900 mm Total length..... 5650 mm Cgebvpvysuwfnaepjt Feed rate speed..... 26m/min HOSE REEL. FOR FEED BEAM 3.9 and 3,9HD for guiding hyd. hoses to power head. OFF-HOLE SHIFT, hyd. operated, allows rotation head to move laterally 270 mm SERVICE CONTROL PANEL with valves laterally mounted DRILLING CONTROLS mounted on flexible arm SILENCED POWER UNIT with 2 hydraulic pumps A10V+A10V, Engine Deutz D 914 L06 2V step III, air cooled diesel engine rated 86,5 kW, 2300 rpm, 24V El. and safety system, oil tank 180l, filling pump, filter unit , fuel tank 80l and piping. Electrical oil cooler incorporated. MAST ATTACHMENT with hydraulic elevating device (double cylinder) and clamp for drill mast. ATTACHMENT for FEED HD type with 500 mm feed advance cylinder CRAWLER, U-F25-1-67 (7 rollers) hydraulically driven, with Rubber pads, Ground clearence 310mm Track width: 300 mm Track length: 2570 mm Crawler width: 1950 mm / Rig width 1950 mm Weight: 1050 kg crawler / 6300 kg rig Max inclination: 30° Max speed: 2,2 km/h Max totally traction force: 66,1 kN HYDRAULIC JACKS Set of four. stroke 4x 450 mm in rear and front elephant foots incl. EMERGENCY STOP DEVICE Always included in basic unit. ASSEMBLY KIT ROT.HEAD DHR48H56-68 Note: rotary head is not incl. in kit ROTARY HEAD DHR48H68-3 Rotation motors 2xOMSS250 Gear ratio : 4,31 :1 , Including floating sub 2 3/8 API Reg box SELECTOR VALVE KIT serial/parallell mode ROT. HEAD DHR48H68 given Serial mode rot.: 0-80 RPM - Torque 2850Nm Serial mode rot.: 0-40 RPM - Torque 5700Nm Figures at 90 l/min and 175 Bar HYD. ROD HOLDER AND BREAKER Incl. plate jaws. Free opening 250 mm. (Extend feed 360mm) Gripping force 88,25 kN (19,730 lbf.) at 180bar Breaking torque 23,8 kNm (5,400 lbf.) at 180 bar HYD OPERATED DIVERTER HEAD DHR48, basic kit including cutting collector head, attachment and two hyd cylinder Guides and seals for ODEX strings not included, To be specified and ordered separately GASKET DIVERTER HEAD tube 89mm GUIDE KIT Diverter head for casings 178mm 7 , MAIN HOIST with short crown block Hydraulically driven hoist HP6/E FH, with disc brake.Hydraulic shut-off device for minimum rope capacity. Steel wire 10mm, L=30m. Lifting hook. Short crown block Lebam type, to handle tubes in drill center. Max. pull capacity 1st layer :10,0 kN Max. lifting speed 1st layer :38m/min HOLD BACK DEVICE new type DTH HAMMER FOG LUBRICATOR LUBROSTAR type incl. high pressure air hose to swivel. Max. 30 bar operating pressure. Lubrication oil tank holds 10 litres. FOAM-WATER PUMP max flow 30 l/min Max delivery pressure 25 bar. RIG CLEANING DEVICE spray gun kit to be used in conjunction with foam water pump SWIVEL 4.5-SI for mud drill activities BELLIN PUMP type NG1200- L2PC max flow 660l/min at max 25 bar - rotor and stator fault WANGEN mud pump with helical rotor, 470 L/min, 25 bar - rotor and stator fault TILTABLE PIPE RACK 40PCS x 76mm x 3 tubes 7 BAR AIR OUTLET for grinder HYDRAULIC OUTLET FOR WELDER HYDRAULIC WELDING UNIT HWG 200-30 defective ROUND JAWS SET FOR CASING OD 178 mm HOLD BACK PRESSURE SYSTEM drill pipe and accessories are sold separately

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FX15 - 14 l/s - 840 l/min Condition: Very good Technical data: Volume flow 14 l/s Volume flow 840 l/min Volume flow 0.84 m³/min Pressure dew point + 3 °C Differential pressure 0.250 bar Power consumption 0.190 kW Operating voltage/frequency 230/1/50 Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Cebvsufp A Iopvypsgt Ambient temperature min. 5 °C Ambient temperature max. 43 °C Inlet temperature min. 3 °C Inlet temperature max. 55 °C Operating pressure min. 6 bar Operating pressure max. 16 bar Dimensions, weights and connections: Length/width/height 493/350/450 mm Net weight 20 kg Compressed air connections 3/4 " Equipment features and special features The FX series refrigeration dryers offer a reliable, cost-effective and simple solution for anyone who requires high-quality compressed air for their production processes. To avoid condensation and thus the risk of corrosion and damage to systems and end products, the compressed air must be dry - which is exactly what the FX dryers are designed for. The FX dryer range is simple yet robust and reliable. It is a simple range that relies on proven technology, solid components and a straightforward design; these features combine to deliver a constant dew point and reliable performance at any volume flow - in almost any production application. Functional principle Refrigeration drying means that the compressed air is cooled, resulting in a large amount of water that must be separated from the air. After cooling and condensation, the compressed air is reheated to around room temperature so that no condensation forms on the outside of the pipe system. This heat exchange between incoming and outgoing compressed air also reduces the required cooling capacity of the refrigerant circuit. Cooling takes place via a closed refrigerant system. Direct refrigerant injection reacts immediately to a load change and a high-precision hot gas bypass valve ensures a constant temperature ratio

Condition: excellent (used), Year of construction: 2008, volume flow: 31.2 m³/h, operating pressure: 11 bar, Adsorption dryer ATLAS COPCO CD 520 CE Output 31,20 m3/min, Year of production 2008 THE DEHUMIDIFIER IS FULLY FUNCTIONAL. Cobvpetxrcyevypogt

Condition: new, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW Cgjbvpohkttpsvypet • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: used, Functionality: fully functional, Manufacturer: Atlas Copco Type: ZT132VSD-FF Power: 132kW/50Hz Max. pressure: 8.6 bar Air delivery: 19.5 m³/min Operating hours: 71 979 h Cgebvpvysuh N S Iepet Dimensions: 4040mm L x 1650 W x 2000 H Net weight: 3700 kg

Condition: used, Atlas Copco GA 410 Cgjbvpvyerw H Daspjt

Year of construction: 1995, Condition: used, machine/vehicle number: AII 318838, SECOND-HAND SCREW COMPRESSOR ATLAS COPCO GA37 KW 7,5 13 BAR - CE RULES - SN AII 318838 - Year 1995 Cebvjr Ilrlopvypogt

Condition: good (used), Good working condition. Please check out our other listings as well. Cgebvpvysqpfnbopet

Year of construction: 2013, Condition: like new (used), REFRIGERATION DRYER ATLAS COPCO FD 185 OUTPUT 11,10 m3/min, YEAR OF PRODUCTION 2013 THE DEHUMIDIFIER IS FULLY FUNCTIONAL. Csbvpsp Ayuqevypsgt

Condition: new, Atlas Copco G5FF 500 lt screw compressor NEW with refrigerant dryer Specification: • condition - New • manufacturer - Atlas Copco • capacity - 790 l/min • main engine power - 5.5 kW • tank - 500 l • maximum working pressure - 10.0 atm • built-in refrigerant dryer Cobvpvog Tzvxjypjgt • electronic setting of compressor operating parameters • soundproof cabin (only 65 dB) • meets CE standards • weight - 221 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • user manual in Polish • available within 7-10 working days

Condition: used, Year of construction: 2001, ATLAS COPCO GA110 SCREW COMPRESSOR Cgsbveuufycjpvypjt

Year of construction: 2021, Condition: like new (used), Air compressor which is used very little because of the lack of work. The reason for it to be sold is the closing of the factory. Cobenl Dvdjvpvypjgt

Year of construction: 2020, Condition: new, Field of application: Construction Attachment suited for: Loaders Selling price: € 100, US$ 105,9 Galen Group is very experienced in delivering custom solutions to the underground mining industry. No matter the need, Galen’s experienced design, engineering and manufacturing teams deliver the solution that is right for you. More heavily guarded underground mining buckets designed for corrosive mining materials. For the entire underground loader line, Galen Ground Engaging Tools system now offers bolt on half arrow ground engaging tools (GET) for bucket edges. The system is designed for high abrasion applications where weld-on GET experience high wear rates. Cgsbvpvon Tm A Tsypst With the retention system, the bolt-on GET offer more wear material than standard weld-on GET, and the bolt-on design enables quick removal and replacement. Despite additional wear material, the low-profile front edge eases pile penetration and promotes fast bucket loading.

Year of construction: 2018, Condition: excellent (used), ATLAS COPCO GX 2 screw compressor on a 250 l pressure tank Cgebvpvop Ebv Ieypet 2.2 kw engine Capacity 0.25 m3/min Pressure 10 bar Mileage 5519 hours THE COMPRESSOR IS FULLY FUNCTIONAL

Condition: new, Year of construction: 2023, overall weight: 340 kg, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards - weight - 340 kg Csbvoh Unupepvypsgt Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: used, ATLAS COPCO TYPE: ZR90 Cgobouruf Novpvypet SCREW COMPRESSOR

Condition: used, Year of construction: 2008, operating hours: 9,700 h, ATLAS COPCO QAS80 2008 1960 KG TOP ----VEHICLE HISTORY * FIRST HAND * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * YEAR OF CONSTRUCTION 2008 * TYPE: QAS 80 * OPERATING HOURS: 9700h * KW: 64 * TOTAL WEIGHT: 1960 KG * READY FOR USE IMMEDIATELY ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATE AND 15 DAYS AUSTRIAN LICENSE PLATE EURO 1 Cebvpervu Ubjvypjgt TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU & third countries, a deposit of at least 500.00 ¤ / 1,000.00 ¤ levied (For sales to the EU and third countries will be levied deposit/guarentee of at least ¤ 500.00 / ¤ 1000.00) Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see homepage Important note - Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, Year of construction: 2014, operating hours: 1,020 h, Delivery rate 3.7 m³/min, pressure range 3.5 - 9.5 bar, 2 air connections, overrun brake, support wheel, vehicle may be covered with advertising and/or lettering. Csbvpvjv Shbboypjgt Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: used, Year of construction: 2023, operating hours: 275 h, 7 bar, power 19.4 kW, new condition, volume flow 2.0 m³/min, support wheel, 2x air connections, Kubota 3 cylinders, all papers, vehicle can be pasted with advertising and/or labeled Cgjbvjvnp Tkspvypet Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!