Used Tos Sui 125 1400 X 3000 Mm for sale (119,952)

Condition: excellent (used), power: 36.04 kW (49.00 HP), fuel type: diesel, We have used Deutz engines in very good condition for sale. Technical specifications: Manufacturer: Deutz Engine: 4-cylinder, air-cooled diesel Type No.: D2011 L04 Power: 36.4 kW / 49 hp at 2500 rpm Condition: Very good (tested) Location: 24229 Dänischenhagen Felqzsv Stumsqpmopg Delivery is available nationwide for an additional charge.

Condition: good (used), Functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: Fpolqzqoticdlepmjg 1400x1400x960mm Mass: 350

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, turning height: 2,200 mm, workpiece weight (max.): 20,000 kg, turning diameter over cross slide: 2,000 mm, turning diameter: 2,600 mm, rotational speed (max.): 250 rpm, spindle speed (max.): 3,000 rpm, table load: 20,000 kg, table diameter: 2,000 mm, Equipment: rotational speed infinitely variable, TOS SKIQ 20 CNC Vertical Borer. 2009. CNC Vertical Borer with Live Tools Drilling and Milling Siemens Sinumerik 840D, ATC 15. With Tools and Renishaw Workpiece Measuring. Table diameter 2.000 mm Max. Swing up to a height of 580 mm 2.600 mm Max. Swing 2.300 mm Turning Heigth 2.200 mm Table speeds, stepless 2,5-250 rpm Table load capacity 20.000 kg Table motor 80 kW Ram 180 x 200 mm, stroke 1.000 mm Fpslqzqpowc R Uwemog Live spindle speed 4 - 3.000 rpm Live spindle motor 28 kW

Condition: ready for operation (used), Year of construction: 1999, 4-Axis CNC Boring Machine Brand: TOS Type: WHN 110 CNC Year: 1999 CN: HEIDENHAIN TNC 430 Specifications: Travel: X cross (table) 2,000 mm Y vertical (slide) 1,600 mm Z (post) 1,250 mm Spindle width 500 mm Spindle diameter 110 mm Spindle taper ISO 50 Max. spindle power 37 kW Max. spindle speed 2,500 rpm Working feeds 5 m/min Rapid feeds 10 m/min Table dimensions 1,600 x 1,400 mm B axis 360,000 positions Equipped with: Folqzqjwdhwfjpmepg TOS universal milling head Dual chip conveyor

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) Fpelqzjlkgvbeqpmsg accessories: coolant equipment, collet chuck incl chucks

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. Foljmhhf Soqzqpmjpg According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Functionality: fully functional, total width: 1,700 mm, total height: 1,800 mm, total length: 2,200 mm, planing width: 500 mm, height adjustment type: electric, overall weight: 2,000 kg, planing height: 200 mm, chip removal: 160 mm, number of blades: 4, working height: 200 mm, number of planer blades: 3, worktable width: 500 mm, pass-through height: 200 mm, extraction connection diameter: 160 mm, number of feed rollers: 3, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: Fpelqewfihuezqpmjg - length: 2200 mm - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl I invite you to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, Functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Fpjlqzqpjwc Ryaomog Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Year of construction: 1990, Condition: good (used), Vat not included in price. Folqod Hgf Rezqpmopg

Year of construction: 2025, Condition: new, RC1100G5 FREE SHIPPING TO EUROPE Product from Serbia 100%. Felqsgd Ucgozqpmjpg 1. Platform diameter: 1100mm 2. Maximum height : 650mm (from platform to nozzles) 3. Maximum load : 350kg 4. Pumps : 2 pumps, each to 2,2kW 400L/min 3,7 bar. stainless steel AISI304 5. Special shape of laser-made nozzles (The best ratio of pressure and width of the jet) 5. Platform drive : Step SERVO MOTOR with with collision detection 6.Heaters : 2x(2x3kW) = 12kW stainless steel AISI304 7. Cover sensor: YES 8. Liquid sensors : YES 9. Platform overload detection : YES 10. Oil skimmer : YES 11. Digital control unit with color screen, 3D notifications, time regulator (up to 80 min.) and temperature regulator (up to 80C) 12. Transport box : Safety wooden packing. WARRANTY 24 months ----- We also offer smaller machines from this series with a platform diameter of 700mm and 900 mm ----- 35 YEARS OF EXPERIENCE IN THE PRODUCTION OF AUTOSERVICE WASHING EQUIPMENT

Year of construction: 1989, Condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Fpolqzqed R Ri Uepmog Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth Folqomhh Dtezqpmjpg 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 3000 Fpoljv U Eu Roqzqpmog Y-Axis Movement 1000 Z-Axis Movement 1400 Additional Equipment Additional Documentation: User manual available This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), The scope of delivery includes: 1x steel panel, used Material color: Sendzimir galvanized Total width: approx. 750 mm Total depth: approx. 1,150 mm Fpelqzqpehzhrgemeg Clear width: approx. 920 mm Crossbeam support: approx. 58 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 15.00 kg Note: - The steel panels have a frame for the crossbeams on one side. (Height: approx. 25 mm) - The other side is continuous and, with an approx. 22 mm high upstand, serves as a push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 3 pieces 3,000 mm – 4 pieces 3,750 mm – 5 pieces Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Hobelbreite 500 mm Max. Hobelhöhe 200 mm Untere Hobelwelle 4 Messer 5.5 kW Motor Obere Hobelwelle 7.5 kW Durchmesser der rechten Spindel 40 mm Motor 4 kW Linker Spindeldurchmesser 40 mm Motor 4 kW Elektrische Höhenverstellung Folqzqowc T Dzjpmepg

Condition: new, Year of construction: 2024, HD-F fiber laser cutting systems Durma fiber laser cutting machines feature faster cutting and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting machines, you are provided with quality, performance and efficiency at the same time, which increases your business value. Thanks to high-precision helical gears, very high acceleration values (28 m/s2), high movement speed (170 m/min) and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design and efficient and user-friendly structure. X axis: 6000 mm Folqzqpeg Adu Hemspg Y axis: 3000 mm Z axis 125 mm Max. sheet dimension: 6048x2024 mm Max sheet weight: 200 kg/m2 X axis: 100 m/min. Y axis: 120 m/mm. Synrochnization: 156m/min. Acceleration: 16m/s2 positioning accuracy: + 0,05 mm Repeatability: +0,05 mm Cutting thickness mild steel: 25 mm Stainless steel: 15 mm Aluminium: 20 mm Standard equipment Automatic shuttle table Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameters

Condition: new, Year of construction: 2025, Functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Felqswc Nrnezqpmopg Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Folqzsmhh Dhoqpmjpg - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Clamping plate diameter: 800 mm Clamping plate speed: 3-304 /min. - increased: 4.5 - 400 /min. - reduced: 2.5 - 225 /min. Max. turning diameter: 950 mm Max. slide stroke: 750 mm Max. turning diameter with side slide: 800 mm Max. slide stroke: 500 mm Fpslswdmxbeqzqpmog Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Electric motor for plate drive: 3-30 kW Machine weight: 10000 kg Hydraulic 3-jaw chuck

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Fpeljv Hxxyjqzqpmjg Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Fpjlqzqsmhhyaepmeg - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Touches 3-points Steady for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Fpolqzqjv Hxv Eopmog Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Fjlqzsmhhx Ijqpmjpg Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Fpelqzemhh Ansqpmeg The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Fslqzqpjmhh Dzomepg The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.