Used Tabe Agb-10B for sale (590)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, overall weight: 198 kg, total length: 740 mm, total width: 554 mm, space requirement height: 1,014 mm, power: 7.5 kW (10.20 HP), volume flow: 1.09 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Stock machine, immediately available in 10 bar version incl. the options: - Direction of rotation control No.10867 (€230,-) - Sound insulation box (noise reduction by approx. 4 dB, +14 kg, length +200 mm) No.20902 (€439,-) 7.5 - 10 - 13 - 15bar possible at very short notice 2-year full functional guarantee Easy to maintain thanks to easily removable doors The right solution for every requirement: as a free-standing system, with attached refrigeration dryer and as a complete unit on pressure vessels in various sizes Intensive cooling in conjunction with an effective aftercooler guarantees operational safety and good air quality Developed for industrial use - even in continuous operation Standard components from German brand manufacturers offer a high quality standard and flexibility in the event of faults Powerful compact compressor stages with integrated oil control valve Effective sound insulation box and multiple bearings on vibration metals enable low-noise and low-vibration operation Cehsvb Agwsxyxf Ijgt Controlled via the RENNERlogic Optionally available: RENNERtronic / RENNERtronic Plus control system Options: Direction of rotation monitoring via phase sequence relay RENNERtronic electronic control unit RENNERtronic Plus electronic control unit Sound insulation box (noise reduction by approx. 4 dB, +14 kg, length +200 mm) Super sound insulation box (sound reduction by approx. 6 dB, +23 kg, length +280 mm) Exhaust air box Filter grille for sound insulation box (2x required)

Condition: like new (used), Floor covering stage covering chipboard NEW As good as new, see pictures. Chipboard type: A SF TYPE P6 38mm according to Din EN312 Top side uncoated, bottom side white coated, Cshjd E Izzsxyxf Isgt grooved as required, cuts according to DIN EN324 Negotiable price: from € 32,-- net per m² ex stock The following quantities & dimensions are available: +200 pcs. length 2.295 mm x width 1000 mm + 60 pcs. length 2.460 mm x width 1000 mm + 70 pcs. length 2.520 mm x width 1000 mm + 60 pcs. length 2.580 mm x width 1000 mm + 80 pcs. length 3.410 mm x width 1000 mm Attention, only complete panels are sold, cutting to size is not possible! Goods are in stock. Transport possible on request. Viewing possible at any time by arrangement. Further information on request. Constantly over 5000 running metres of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from a wide variety of areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our page, please click on our logo!

Condition: refurbished (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 0-261-97-5392, RECONDITIONED SINGLE-SIDED EDGEBANDING MACHINE BRANDT KDF 650 Cshxeu Eflnoyxf Isgt

Condition: new, Pressure Controllers RT-116 017-520366 / RT200 017-5237 / RT5A (AMMONIA) 017-504666 / RT112 017-519166 / Cgjhxyxoum Rlbof Ist

Condition: new, Galen Hot Slag buckets are made of Hardox HiTemp material, special adapters, teeth and welding wire. Hot slag can reach temperatures of approximately 750 °C so extend durability with Galen bucket Cgshxyxfotn Dh Ej Iet

Condition: new, Manufacturer: REXROTH Cjhxyxfeviylye Isgt Type: SERVO DIRECTIONAL VALVE Model: 4WS2EM10-45/10B2ET315K8BM-52 MNR: R900501001

Condition: new, Manufacturer: REXROTH Type: SERVO DIRECTIONAL VALVE Model: 4WS2EM10-45/10B2ET315Z8BM MNR : R900380085 Cgoheviyltexyxf Ijt Size: 10 Flow Rate: 45 l/min Maximum Operating Pressure :315 bar Ambient temperature range: –20 …. +60 °C

Year of construction: 2020, operating hours: 1 h, Condition: as good as new (ex-display), High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Flow rate: 12 l/min. - motor: electric 4-pole 230V 2,2kW, 1400 1-min - dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START device - Handle with holders for mains cable and high pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm Ø) for easy movement on steps and over uneven terrain - Pressure gauge - Built-in professional relief valve - Delayed TotalStopp - Pulsating system - Rotary switch - Thermal motor protection - Stainless steel manual hose reel with 30 m of 1/4" HD hose - 2 pieces 1/4" F pipe cleaning nozzles - Gun with wash lance and flat spray nozzle Cohxyxfjgcbzcs Iegt The CJ-1E is a mobile high pressure washer ideal for cleaning and unclogging pipes 30 to 120 mm. Equipped with a 2.2 kW and 230V electric motor, it can be used in apartments, houses or commercial spaces for sinks and toilets, as well as garden and general cleaning. The Comet LW-K pump with Easy-Start and pulsation function guarantees extreme reliability and high cleaning performance.

Condition: new, Year of construction: 2025, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key advantages strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components for safe and effective work Cgjhomqlguoxyxf Ijt a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the cooler to the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filter system with triple separation for efficient work the compressor uses a reliable and reliable transmission system using a belt transmission, which ensures high effective efficiency low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) MAM series electronic control allows you to set parameters, including: service intervals, lack of alarms power supply, phase reversal, phase loss, overheating, other, Master/Slave operation, possibility of connecting up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and others Technical parameters Voltage 400V/50Hz Dimensions 810 x 610 x 850 mm Weight 120kg Performance 0-6 bar - average 720 L/min At 6 bar - 650 L/min At 8 bar - 650 L/min At 10 bar - 630 L/min The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2009, Boiler Astebo 5500kw,10Bar,120°,year 2009,capacity 5250l Cehxyxfovu I Dnj Ijgt

Year of construction: 2020, operating hours: 0 h, Condition: as good as new (ex-display), PTC JTR-C cold water trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, stands, rear lights and reflectors, towing eye for 50 mm coupling, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min at 210bar | Engine: Kohler KDW 2204 37,5kW JTR-C 84/190 | 84l/min at 190bar | Engine: Kohler KDW 2204 37,5kW JTR-C 102/150 | 102l/min at 150bar | Engine: Kohler KDW 2204 37,5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 Cohxysfdkbgsxf Iogt - Empty weight: approx. 600 kg - High pressure pump: HPP - HD-reel: fixed and manual or hydraulic with max. 100 m 1/2" and 60 m. 3/4" hose (included) - Water supply reel: manual with 50 m. 3/4" hose - water tank: 600 l - Options such as radio remote control, warning light, work light and accessories on request

Condition: new, Year of construction: 2025, The LUFT screw compressor is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key advantages strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components for safe and effective work a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the cooler to the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filter system with triple separation for efficient work the compressor uses a reliable and reliable transmission system using a belt transmission, which ensures high effective efficiency low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) MAM series electronic control allows you to set parameters, including: service intervals, lack of alarms power supply, phase reversal, phase loss, overheating, other, Master/Slave operation, possibility of connecting up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and others Cehsmqlhvoxyxf Ijgt Technical parameters Engine power 7.5kW Voltage 400V/50Hz Dimensions 810 x 610 x 850 mm Weight 120kg Performance 0-6 bar - average 920 L/min At 6 bar - 750 L/min < /b>At 8 bar - 750 L/min At 10 bar - 730 L/min The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2018, Condition: excellent (used), machine/vehicle number: B8.01142.0395, Stationary high pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Working pressure: 610 bar Delivery rate: 78 l/min. Drive speed: 1500 rpm. Driving power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x850x1.450 mm Cgohxyxoh E Dgzof Ijt Weight: approx. 1.200 kg Year of manufacture: 2018 Condition: after service by Hammelmann in October 2020 run only a few weeks and out of service for more than a year. In very good used condition.

Condition: new, Year of construction: 2025, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Additional double filtration in the air-dryer. Set by default includes: Theor 20 screw compressor N20S air-dryer 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" The price is a net price. Price does not include shipping costs. Cgohjmqlm Tsxyxf Ist For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1 h, High-pressure cleaning device, high-pressure flushing device, high-pressure built-in flushing device on hot-dip galvanized and painted high-quality steel frames with forklift lugs suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no finishing time & jib, Karo, Leistikow, Müller, Rioned, Rockstrah, Rom, Rowo,... The following models are available: Whale 36/210 | 36l/min at 210bar | Engine: Honda GX630 14,7kW Whale 43/180 | 43l/min at 180bar | Engine: Honda GX630 14,7kW Whale 55/160 | 55l/min at 160bar | Engine: Honda GX690 17,7kW DIMENSIONS / WEIGHT: dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm empty weight without water tank : approx. 250 kg Cgjhxyodqmttjxf Iot Dimensions and empty weight with 300 l water tank: approx. 1.160x1.000x1.030 mm and approx. 280 kg Dimensions and empty weight with 500 l water tank: approx. 1.260x1.000x1.030 mm and approx. 300 kg HIGH PRESSURE PUMP: Manufacturer: COMET Model: TW 13022S Premium MOTOR: Manufacturer: Honda Model: GX 690 Fuel: petrol Cooling: Air Cylinders: 2 Displacement: 688 cm³ Max power: 24 PS (17.7 kW) Max engine speed: 3,600 1-min. TRANSLATION: Gearbox CONTROL PANEL: ignition key Operating hours counter Electronic fuel gauge LED display for low pressure of lubricating oil Emergency stop button INSTALLED ALARM: Low-water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: The device is equipped with a safety valve, a D [...]

Condition: new, Year of construction: 2025, CORMAK THEOR series is a modern solution used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device promise efficient and trouble-free operation. Most important advantages: sturdy, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for efficient work efficient motor with power 5.5 kW made in IP54 standard, using a belt transmission, which ensures high effective efficiency lower noise due to the sound dampening plates electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other Cohxyjklz Syoxf Isgt Technical data Power 15 kW Power supply 400V/50Hz Supposed air flow 2.2 m3/min Actual air flow 1.768–1.86 m3/min Dimensions 1080 x 750 x 1000 mm Weight 290 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: like new (used), Brother Printer Laser HL-l6250DN , low meters , in perfect condion ( as new ) . Cehxokuzv Esyxf Isgt 60 € unit . Minimum order : 10 units Fast print speeds of up to 46ppm Combined paper input of 570 sheets Automatic 2-Sided Printing High-Yield Replacement Cartridges - Optional super high yield 12,0001 page toner cartridge 1 line, 16 character backlit LCD display High speed wired (10Base-T/100Base-TX /1000Base-T) and USB 2.0 connectivity

Condition: used, Year of construction: 2015, Field of application: Construction Serial number: 11-1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17783 Specifications AMV: - 2015 model - Not certified - Engine hours: 2297 hours - Transmission hours: 688 hours - compressor hours: 8056 hours - Pump hours: pump V: 8878t- Pump S: 9170t- Pump H 8788t - Percussion hours: stroke v: 2950t-stroke s: 3142t- stroke H 2984t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) Cgohxysvg Rcdoxf Ist - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery

Year of construction: 2001, Condition: like new (used), Roller coater Brand:Sorbini Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Techn info: Working width max 1300mm Thickness of workpiece 0-80mm Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Cjhxofw Nc Uoyxf Iogt Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Condition: excellent (used), Functionality: fully functional, power: 66 kW (89.73 HP), overall weight: 7,720 kg, Year of construction: 2015, Equipment: additional headlights, air conditioning, cabin, hydraulics, Komatsu WA100M-6 solid rubber/additional hydraulics/air conditioning - Manufacturer: Komatsu - Type: WA100M-6 - Year of manufacture: 2015 - Operating hours: 7175h - Perm. total weight: 7720kg - Power: 66kW - CLIMATE - Solid rubber industrial tires - Fast and slow - Auxiliary headlights - Auxiliary hydraulics - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, Cohxyxfovgdgco Iogt - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, Year of construction: 2014, Field of application: Construction Serial number: 11-xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17779 Specifications AMV: - 2014 model - Not certified - Engine hours: 2097 h - Transmission hours: 612 hours - Compressor hours: 10999 hours - Pump hours: pump V: 10840t- Pump S: 11232t- Pump H 10736t - Percussion hours: stroke v: 3923t-stroke s: 3811t- stroke H 3770t - Engine: Deutz TCD 2012, 140 kW at 2300 rpm (water-cooled) - Diesel tank of 160 litres - Transmission: Dana hydrostatic C272.5 - Max speed 15 km/h (horizontal) - 50 Ton Machine weight - Central lubrication - Width: 2,920 mm - Height: 3450 mm - Total length w/18ft. feeders 16,100 mm - 4 support legs - Montabert HC 110 - Max stroke frequency: 35 kW - Max impact pressure: 187 bar - Rotation speed: 50-300 rpm - Lubricating air consumption: 300 L/min - Flushing water consumption: 133L/min (per hammer) - Electronic feeder - Charging basket - Fixed drilling automation - Dafo Forrex Fire extinguishing system for engine compartment - Feeding beams BDS-8000 Cgjhxyxfevg Nble Iot - Ready for delivery Description: Amv 21sgbc-cc tunnel rig for sale. Services are taken continuously Everything works as it should according to the owner. It can come with spare parts for an additional price if desired. Ready for delivery.

Condition: excellent (used), Functionality: fully functional, power: 130 kW (176.75 HP), empty load weight: 17,800 kg, Year of construction: 2018, operating hours: 3,953 h, Equipment: additional headlights, adjustable boom, air conditioning, cabin, hydraulics, CAT M318F ZSA/Auxiliary hydraulics/Hydr. SW/3953h - Manufacturer: CAT - Type: M318F - Year of construction: 2018 - Operating hours: 3953h - Weight: 17.800kg - Power: 130kW - Hydraulic quick coupler - Additional hydraulics - Hammer grapple - Adjustable boom - Central lubrication system - Backhoe bucket 75cm - F.O.P.S. stone guard - Dozer blade - Fast and slow - All-round camera - Auxiliary headlights - AdBlue - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs declaration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - Cehxeviuhijyxf Iogt - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: excellent (used), Functionality: fully functional, mileage: 92,926 km, power: 265 kW (360.30 HP), first registration: 08/2017, overall weight: 26,000 kg, axle configuration: 6x2, maximum load weight: 9,950 kg, empty load weight: 16,050 kg, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, hydraulics, Mercedes Benz Antos 2536 Side loader Inch SLF XL 28 - Manufacturer: Mercedes-Benz - Type: Antos 2536 - First registration: 08/2017 - Kilometers: 92.926km - Unladen weight: 16.050kg - Payload: 9.950kg - Gross vehicle weight: 26,000kg - Power: 265kw/360PS - Lane keeping assistant - Right-hand drive - Automatic air conditioning - Adblue - 6x2 - Inch side loader (right) - Type: SLF XL 28 - Operating hours: 9764h - With integrated dumping - Type: Zöller FLEX 1100 - Tiltable emptying container - Telescopic emptying mechanism - Vertically and horizontally adjustable - Internal and external operation - Euro 6 - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone Cgjhxyxfevdc Uye Ist - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: excellent (used), Year of construction: 2016, operating hours: 4,960 h, Functionality: fully functional, overall weight: 19,500 kg, power: 240 kW (326.31 HP), Doppstadt DW2060K Shredder/Shredder/Shredder 4960h - Manufacturer: Doppstadt - Type: DW2060K - Year of construction: 2016 - Operating hours: 4960h - Perm. total weight: 19500kg - Power: 240kW / 326PS - Engine: OM926LA - Maximum efficiency thanks to 100% mechanical drive - Limiter" fine shredding system - Contamination-resistant shredding - Grain limitation with limiter system - Choice of shredding packages - Robust tracked undercarriage with two speeds - Lower belt NEW - Discharge conveyor NEW - Rear steering NEW - Remote control NEW - German machine - Ready for immediate use Cgjhjvkfp Tsxyxf Iet You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: excellent (used), Functionality: fully functional, mileage: 364,122 km, power: 170 kW (231.14 HP), first registration: 07/2000, overall weight: 11,990 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 5,958 kg, empty load weight: 6,032 kg, Year of construction: 2000, Equipment: ABS, air conditioning, - Manufacturer: Mercedes-Benz - Type:Atego 1223 - First registration: 07/2000 - Kilometers: 364122km - Unladen weight: 6.032kg - Gross vehicle weight: 11.990kg - Power: 170kw /230PS - Gearbox: Manual gearbox - 4x2 - ADR - Aurepa tank body - 2 chamber - 1st chamber: 4,200L - 2nd chamber: 4.500L - Total capacity: 8,700L - A1 Delivery: gasoline, heating oil, diesel - Sening measuring system - Air conditioning - Diesel fuel - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - Cgjhevgv Thsxyxf Ist - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.