Used Hub-Lift U-1000 for sale (42,685)

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads Manufacturer EXPRESSO Type Lift & Drive 175 (lift2move) Series. No. 19153-0525 Year of construction 2011 Type no. Nominal lifting capacity 175 kg Lifting distance 1880 mm Lifting height 2760 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 730 mm Chassis length 970 mm Underride height 90 mm Underride length 485 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 1220 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack - External charger 24 VDC, 3 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake Dob Hsfr Izgelma Iecg - Handle infinitely height-adjustable - Load-bearing flange to EXPRESSO standard 280 x 50 mm / 3 M10 mounting holes at 110-110 mm intervals Mounted lifting aid: Swivel arm Load capacity of the lifting aid 60 kg Swivel range +-30° (locking only at 0°) Swivel arm length 600 mm - Infinitely adjustable lifting eye, hole diameter 30 mm Total weight approx. 100 kg Good condition

Year of construction: 1978, Condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min Djb Hed Ih Ncelma Iocg rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Year of construction: 2010, Condition: good (used), from injection molding machine KM500 year 2010, Turntable MOD: PRX.1000 Rotary table diameter: 1000mm weight 1500 kg The table is fully functional, but there is no electricity. closet. However, Dcobeu Axhwe Hlma Ieg it can be converted into a hydraulic motor and controlled using a press via hydraulic cores. table load 3020 kg maximum mold weight

Condition: used, machine/vehicle number: 516210E00866, Year of construction: 2015, operating hours: 14,299 h, load capacity: 1,500 kg, lifting height: 6,600 mm, free lift: 2,400 mm, mast type: triplex, construction height: 2,860 mm, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: 516210E00866 Mast type: Triplex Technical condition: very good Dcjb Heuhxx Dolma Ijg Battery Volt: 48V Battery Ah: 575Ah Battery year of construction: 2014 Description: Still RX20-15 No.: M0214 Year of construction: 2015 Operating hours: 14299 The device is visually in good and technically in good condition. Charger on request. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site. Sideshift, 3rd valve,

Condition: used, Year of construction: 2022, load capacity: 1,000 kg, lifting height: 715 mm, construction height: 1,250 mm, fork length: 1,150 mm, total length: 1,526 mm, drive type: Handbetrieb, construction width: 540 mm, net weight: 104 kg, Scissor lift truck Fork width: 160 mm Dsb Hlmorf Ik Toa Iecg Fork thickness: 48 mm Technical condition: New Front tires type: Solid rubber Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Condition: 80 - 100%

Condition: used, Year of construction: 2005, turning diameter 340 mm turning length 1.000 mm control OSP E 100 L greates pass round over bed 530 mm Swing dia. over traverse guideway 420 mm distance between spindles 1.020 mm axis stroke: x-axis 260 (185 + 75) mm z-axis 1.020 mm C-Axis 360 ° Main spindle: turning speed range - main spindle 38 - 3.800 min/-1 power capacity - main spindel 22 / 15 kW transmission ratio 1 spindle nose JIS A2-8 spindle bearing diameter 120 mm max. usable bar diameter 70 mm C - Axis 0,001 ° chucking diameter 250 mm turret: number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 25 mm Drill shank diameter 40 mm tool taper VDI 40 Spindle speed - driven tool stations 45 - 4.500 min -1 power capacity - driven tool-stations 5,5 / 3,3 kW Tailstock: diameter of quill 90 mm Dcsb Hlstqmr Dsma Ijg quill stroke 120 mm taper of center MT 5 feeds: rapid traverse ( X / Y / Z ) 20 / 10 / 25 m/min rapid traverse C-axis 200 min/-1 feed speeds 0,001 - 1.000.000 mm/min total power requirement 25 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC-Turning- and Millingcenter OKUMA - SpaceTurn LB 300 MC / 1000 - Tool-Drive - C-Axis - Without driven toolholders shown on pictures !

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker Dceb Hoflt Edslma Iog for ergonomic handling of small loads Manufacturer EXPRESSO Type Lift & Drive 225P (lift2move) Series. No. 19500S-0150 Year of construction 2008 Type no. Rated capacity 225 kg Lifting distance 1680 mm Lifting height 2200 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 861 mm Chassis length 1020 mm Underride height 90 mm Underride length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack - External charger 24 VDC, 3 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load lifting flange according to EXPRESSO standard Special version: Lifting aid from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting aid 25 kg - Lifting aid can be swiveled 90° via hand hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping via handwheel - Dead weight of lifting aid 60 kg Total weight 140 kg Very good condition

Year of construction: 2013, Condition: excellent (used), Lifting and tipping device - swiveling device for emptying, filling, tilting bulk goods / small parts etc. Manufacturer: Schuessler Type: HS-F1000 Year of construction: 2013 Hydraulic pivoting Dcsb Hleh Dbnpsma Iog Load capacity: 1000 kg Movable, locking spindle for swivel operation. Version with bulk material chute, infinitely adjustable manually. Button operation up/down and emergency stop. Weight: 700 kg

Condition: used, mileage: 318,000 km, power: 272 kW (369.82 HP), first registration: 05/2015, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 05/2025, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Scania P370 with automatic transmission, lift/steering axle, air suspension, 50% tires, Palfinger T20 roll-off tipper body, Palfinger Epsilon M120Z95TR crane with radio remote control and scrap grab, rear differential lock, reversing camera, Maul trailer coupling, Deb Hljvw Hbwema Iscg Sold on behalf of the customer, vehicle is still registered, so the mileage may increase. All information without guarantee, errors excepted,

Condition: used, machine/vehicle number: 516211D00767, Year of construction: 2013, operating hours: 8,047 h, load capacity: 1,600 kg, lifting height: 3,240 mm, free lift: 1,430 mm, mast type: duplex, construction height: 2,090 mm, fork length: 1,300 mm, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: 516211D00767 Mast type: Duplex Condition: Ready for use and fully functional Dsb Hlmaeuhxwyo Ijcg Technical condition: good Battery Volt: 48V Battery Ah: 625Ah Battery year of construction: 2018 Description: Still RX 20-16 M0557 Year of construction: 2013 Operating hours: 8,047 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site Push fork, sideshift, fork positioner, Push fork 1300 - 2000 mm 3rd valve, 4th valve,

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 48V 5PZS 775AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Dsb Hjt R Sblolma Iscg Test date 2024 Dimensions: 1220 x 424 x 782 mm Weight: approx. 1,125 kg Capacity: min. 90-100% (C5 protocol is enclosed on delivery) Suitable for the following models and more: Linde A/R14/- R16/- R20-/ R25 Still FM-X12/FM 14/-FM17/-FM-X20-/FM-X25 Jungheinrich ETV 214/- 216/-318-/ 320/-325/-C20 -/ETW 216 Crown ESR 3020 1.4/1.6/2.0 Crown ESR 4000 1.4/1.6/2.0 Crown ESR 4500 1.4/1.6/2.0 Crown ESR 5000 / 5240 1.4 / 5260 1.4 / 5280S-1.6 /5280S-2.0 Atlet push mast Caterpillar NR14N/-16-/NR20-/NR25 Mitsubishi RB14 RB14N RB14-25 Hyster R1.0-/1.4-/1.6-/2.5 Yale MR 16 All common battery sizes available

Condition: used, mileage: 722,000 km, power: 228 kW (309.99 HP), overall weight: 19,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: mechanical, loading space width: 2,300 mm, loading space length: 5,700 mm, Year of construction: 2005, first registration: 02/2005, Equipment: ABS, air conditioning, crane, DAF CF 75.310 Platform 7,00 m + CRANE + REMOTE CONTROL + LIFT Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2005 ? MILAGE: 722 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL MIRRORS ? POWER STEERING ? TACHOGRAP PLATFORM: 570 x 230cm (L x W) CAPACITY: 8 000 kg TOTAL WEIGHT: 19 000 kg WHEELBASE: 540 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: PALFINGER 12000 + REMOTE CONTROL Dceb Hljmv Ikwsma Isg TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Dsb Hlsflt Ebsma Iscg Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, mileage: 116,000 km, power: 106 kW (144.12 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, maximum load weight: 835 kg, first registration: 06/2019, emission class: euro6, color: grey, suspension: steel, Year of construction: 2019, machine/vehicle number: 1067, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, tail-lift, Mercedes Sprinter 314CDI furniture box tail lift     2143cc 105kW 143hp     EURO 6c-EVAP     116700km               - automatic air conditioning     - central locking with remote control 2 keys     - start button -key free     - navigation system GPS MBUX 7"     - Multimedia system MBUX 7"     - Voice control MBUX     - DAB digital radio     - bluetooth for mobile phone     - Browser     - Carplay     - electric windows and mirrors     - light and rain sensor     - 1+2 seats     - furniture box 4.36m x 2.10m x2.10m     - tail lift dhollandia     - load capacity 835kg     - tire pressure detection          Price: 26500€ +21% VAT = 32065€   car is sold with inspection for sale and carpass   Dob Hlmelxykzsa Iecg     

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 3,853 h, load capacity: 2,000 kg, lifting height: 3,700 mm, free lift: 1,730 mm, fuel type: electric, mast type: duplex, construction height: 2,372 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Dcob Hlmsvxxy Isa Isg Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 48V Battery Ah: 750Ah Battery year of manufacture: 2018 Description: Side shift, 3rd valve, rear work light, front work light, safety light, LED,

Year of construction: 2012, operating hours: 5,882 h, Condition: used, lifting height: 3,700 mm, mast type: standard, construction height: 2,660 mm, drive type: Diesel, load capacity: 4,500 kg, net weight: 6,485 kg, machine/vehicle number: H2X394H02430, Diesel forklift truck Fahrgestellnummer: H2X394H02430 Mast type: Standard Condition: Limited operational Dcsb Hlmjuhxahja Iog Technical condition: Normal Description: Linde H45D-02 No.: R0043 Year of construction: 2012 Operating hours: 5882 The device is visually in a normal and technically in a normal condition. Subject to errors and prior sale. If you have not found your stacker, please contact us. We have a large selection of other trucks on site.

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 48V 4PZS 620AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Test date 2024 Dimensions: 1,220 x 352 x 782 mm Djb Hlmaouiqrfj Ijcg Weight: approx. 969 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Suitable for the following models (reach trucks) and more: Linde A/R10/-R12/-R14/- R16/- R20 Still FM-X12/FM 14/-FM17/-FM-X20 Jungheinrich ETV 112/- 214/- 216/- 320/-325/-C16 Toyota /BT RRE 200 Crown ESR 3020 1.4/1.6/2.0 Crown ESR 4000 1.4/1.6/2.0 Crown ESR 4500 1.4/1.6/2.0 Crown ESR 5000 / 5240 1.4 / 5260 1.4 / 5280S-1.6 /5280S-2.0 Atlet push mast Caterpillar NR14N/-16 Mitsubishi RB14 RB14N RB14N2S Hyster R1.6 Rocla push mast Yale MR 14 /16 All common battery sizes available

Condition: excellent (used), Welding current max.: 5kA Welding force: 45-150N Closing stroke: pneumatic Welding pressure: pneumatic, resetting unit with disk spring Dceb Hlmetq Ez Eea Iog Force adjustment: Proportional valve Electrode shape: cylindrical, 6mmØ --- Welding control: optional (according to recommendation) --- equipped with: - Base body with welding heads on aluminum - Modular design - Electrodes top and bottom with feed cylinder - Welding head top F120K with repositioning unit - pneumatic valve units - Pneumatic air cooling unit for electrodes - Workpiece carrier on dovetail guide, for exact positioning to electrodes positioning to electrodes --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads Manufacturer EXPRESSO Type Lift & Drive 175 (lift2move) Series. No. 19152-0918 Year of construction 2010 Type no. Nominal load capacity 175 kg Lifting distance 1090 mm Lifting height 1780 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 800 mm Chassis length 1100 mm Underride height 175 mm Underride length 670 mm Chassis design (front / rear) Ø 120 / 150 mm (2 swivel castors / 2 swivel castors) Overall length 1220 mm Overall width 700 mm Overall height 1950 mm Maximum height 2870 mm (with lifting aid extended) Motor power 400 W Deb Hjflt Efjlma Iocg Battery capacity 24 V / 17 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack - External charger 24 VDC, 3 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support Double flange according to EXPRESSO standard 2 pieces mounted on top of each other, each 280 x 50 mm / 4 M10 mounting holes Mounted lifting aid: Swivel castor support Expresso type 04175470 Load capacity of the lifting aid 70 kg Rotation via electric drive with infinitely variable speed control Rotation range 360° endless Roller arms on linear guides individually infinitely adjustable Roller arm span min./max. 1350 - 2050 mm (infinitely adjustable) Roller arm depth 560 mm A workpiece holder is located in the center of the roller arms (adjustment range 0 - 80 mm) Total weight 150 kg good condition

Condition: used, Year of construction: 1994, plate width 630 mm Dcsb Hjunuptjlma Isg plate depth 500 mm plate height ? mm weight of the machine ca. ? t dimensions of the machine ca. Ø 900 m Pallet / Clamping pallet / Interchangeable pallet with hole grid Clamping surface 630 x 500

Condition: good (used), Year of construction: 2002, Functionality: fully functional, clamping force: 17 kN, screw diameter: 135 mm, displacement volume: 8,160 cm³, injection pressure: 1,600 bar, ENGEL 1750 T injection molding machine Reference : T18000/1000 Year : 2002 Clamping force : 1750 T Dcjb Hlmaeummkto Iog Screw diameter : 135 mm Maximum material pressure: 1600 bar Injection volume: 8160 cm3 Distance between columns (H x V): 1805 x 1405 mm Platen dimensions (H x V): 2660 x 2250 mm Minimum mold thickness: 700 mm Maximum mold thickness: 1500 mm Hydraulic cores: 2

Condition: used, machine/vehicle number: H2X388H01286, Year of construction: 2017, operating hours: 6,460 h, load capacity: 5,000 kg, lifting height: 2,600 mm, free lift: 1,250 mm, mast type: duplex, construction height: 2,200 mm, fork length: 1,800 mm, drive type: Elektro, net weight: 7,942 kg, Electric 4-wheel forklift truck Fahrgestellnummer: H2X388H01286 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Deb Hlmaouhw A Io Iocg Battery Volt: 80V Battery Ah: 930Ah Battery year of construction: 2017 Description: Linde E 50 L -01 No.: R0159 Year of construction: 2017 Operating hours: 6,460 The device is visually in very good and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other equipment on site. Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 48V 3PZS 465AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Test date 2024 Dimensions: 1,220 x 280 x 782 mm Weight: approx. 770 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Suitable for the following models and more: Linde R14/- R16/- R20 Dcjb Hlsuiqquoma Iog Still FM 12/- FM 14/- FM-X14 Jungheinrich ETV 114/- 214/- 216/- 314 Crown ESR 3020 1.4/1.6/2.0 Crown ESR 4000 1.4/1.6/2.0 Crown ESR 4500 1.4/1.6/2.0 Crown ESR 5000 / 5240 1.4 / 5260 1.4 / 5280S-1.6 /5280S-2.0 Atlet push mast Caterpillar NR14N Mitsubishi RB12 RB14 RB14N RB14N2S Rocla HS14F Yale MR 14 / H All common battery sizes available

Condition: used, mileage: 254,000 km, power: 235 kW (319.51 HP), first registration: 12/2018, overall weight: 26,000 kg, fuel type: diesel, color: black, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 50 m³, loading space width: 2,490 mm, loading space length: 9,030 mm, loading space height: 2,200 mm, Year of construction: 2018, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * Location SafeServer structure * certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Waste paper certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing * Large folding steps on the side * Ball and jaw trailer coupling * Liftable self-steering axle * Differential lock * Sat nav * Automatic gearshift Dsb Hjvtu Ukjlma Iecg * Euro 6 * Adaptive cruise control * Lane keeping assistant * Rear view camera * Automatic climate control * Seat heating * Fully air-suspended

Condition: used, mileage: 187,000 km, power: 235 kW (319.51 HP), first registration: 12/2018, overall weight: 26,000 kg, fuel type: diesel, color: black, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 50 m³, loading space width: 2,490 mm, loading space length: 9,030 mm, loading space height: 2,200 mm, Year of construction: 2018, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * Location SafeServer structure * certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate Dcjb Hlmasvtigns Isg * Waste paper certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing * Large folding steps on the side * Ball and jaw trailer coupling * Liftable self-steering axle * Differential lock * Sat nav * Automatic gearshift * Euro 6 * Adaptive cruise control * Lane keeping assistant * Rear view camera * Automatic climate control * Seat heating * Fully air-suspended