Used Nilfisk-Alto Floortec 560 B Obc for sale (9,244)

Condition: reconditioned (used), Year of construction: 1981, Functionality: fully functional, machine/vehicle number: 1816-257, planing height: 130 mm, spindle diameter: 40 mm, planing width: 230 mm, rotational speed (min.): 6,000 rpm, planer shaft diameter: 40 mm, workpiece height (max.): 130 mm, workpiece width (max.): 180 mm, shaft diameter: 40 mm, Weinig Hidromat H22B .8 spindles. Coln Eovk Sfusikajrb Passage 230 x 130 mm. Станок посельно ТО. Machine for the production of high-quality propellant. Year of manufacture: 1981. №1816 - 257 Speed of feeding 6-50m\min, electric motor-7.5 kW, frequency РАСПОЛОЖЕНИЕ ШПИНДЕЛЕЙ / МОЩНОСТЬ ДВИГАТЕЛЕЙ: 1. Horizontal lower – 5.5 kW. 2. Vertical right – 5.5 kW. 3. Вертикальный левый –7.5 kW; 4. Vertical right – 5.5 kW, 5. Vertical left – 5.5 kW. 6. Горизонтальный верхний – 5.5 kW. 7. Горизонтальный верхний - 5.5 kW, counter + jointer 8. Горизонтальный нижний - 5.5 kW, контропора + джоинтер Spindle speed 6000 rpm diameter of spindles-40mm Автоматический насос резиги стола. Пневмо прижим, давление вудка 6 Bar 5 leading rollers in the table There are video scrolling mechanisms

Condition: new, Exhibitor compressor Condition: very good Features: * Durable, V-belt driven compressor blocks * Motor and compressor protection against overheating * With refrigeration dryer mounted on container * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: Creln Esvf Sa Ujikaob . H704106 Compression end pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.5 m³/min Compressor speed 6,010 min-1 Rated power drive motor (V/Hz) 4 kW Electrical connection 400 V / 3 phases / 50 Hz Protection class drive motor IP 55 Ambient temperature min. / max. +5°C / +40°C Oil capacity 2.5 l Sound pressure level (LPA1 -DIN 45635 T13) 61 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1498 mm x 582 mm x 1340 mm Weight 204 kg Technical data refrigeration dryer DK 600 SMART: Volume flow at pressure dew point +3°C 600 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.16 kW Air connection 3/4 "a Refrigerant charge R134a

Condition: new, Year of construction: 2024, Oil lubricated rotary vane vacuum pump. Available in stock. Completely new. 12 months warranty Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Any clarification, do not hesitate to contact us. Crjln Eoftzx Esikaeb

Condition: used, TECHNICAL DETAILS For CNC lathes with fixed or mobile headstock and for transfer machines. - bar diameter : round, 5 - 65 [mm] hexagonal, 5 - 56 [mm] - max bar length : 6 [m] - magazine capacity (with bundle) : 2500 [kg] - weight : 2700 [kg] EQUIPMENT Crelnouhbg Ds Eikasb - pushcart length : 1250 [mm] - pushcart axis height : 1100 [mm] - pushcart diameter : 63 [mm] - canal diameter : 70 [mm]

Condition: excellent (used), Year of construction: 2017, operating hours: 39,047 h, Functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, bar diameter: 52 mm, controller manufacturer: FANUC, controller model: 32i-B5, number of slots in tool magazine: 12, BIGLIA B 545YS CNC turning center with Fanuc 32i - B control, C-axis on main and counter spindle, Y-axis, 12 driven tool stations and CNC-controlled counter spindle Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS CNC control: FANUC 32i-B5 Main and counter spindle: 2 C-axes, 1 Y-axis and 1 turret with 12 driven stations each Main spindle: A5' 15 kW Counter spindle: A5' 11 kW Bar capacity: 52 mm Spindle bores: 59.5 mm Rotation diameter over bed: 580 mm Max. Turning diameter: 220 mm Turning length: 560 mm Control: Fanuc 31i B-5 Y-axis: 105 mm X-axis with flat guide: 173 mm Z-axis: 560 mm Turret: 1 piece with 12 driven tool stations each 12 driven tool stations 2 C-axes Celjt N Sm Ssn Eikaerb MACHINE DETAILS Machine dimensions: approx. 4300 x 2000 x 2200 [mm] Machine weight: approx. 5050 [kg] Loading magazine dimensions: approx. 2200 x 1000 x 1700 [mm] Weight of loading magazine: approx. 800 [kg] Dimensions peripherals & accessories: approx. 1900 x 700 x 800 [mm] Weight of peripherals & accessories: approx. 300 [kg] Chip conveyor dimensions: approx. 4100 x 2100 x 1300 [mm] Weight of chip conveyor: approx. 800 [kg] Workpiece unloading system: with tray for removing the finished parts and transferring them to container or conveyor belt Max. part length: 150 mm Hinged belt chip conveyor: with ejection height 820 mm Interior rinsing with pump: 4 bar Flushing gun for cleaning the work area Work area light splash-proof Handwheel: electronic Control cabinet: air-conditioned Flat screen: 10.4" LCD Central lubrication: automatic Color: light grey/anthracite RAL 7035/7016 EQUIPMENT - Measuring probe, swiveling, with 1 head for tool measurement - MANUAL GUDIE , dialog programming turning/milling cycles, 3-D simulation, manual (on CD) - SBS tool breakage/wear monitoring system - HAINBUCH SPANNTOP AXFIX 52-A6 NOVA offset, length 150mm - Three-jaw wedge bar chuck 165/45 / A5 SMW HFKN-D 165-3 1/16 (still to be tested) - Bar feeder LNS Quick Load SERVO 80 S2 (year 2017_QLS 8O S2) - Short bar loader Quick Load Servo 80 Bar length 900mm / ®6-65/80mm Feeding ramp 600mm - Transverse/longitudinal shifting device - HD high pressure system approx. 30-40bar High pressure pump for coolant emulsion - Coolant fine filter cartridge, supplies turret - Hinged belt conveyor - Various tool holders - Flat and external turning holder, 20 x 20 mm - Rotating holder - Axial turning holder - Cut-off and turning holders - Face / turning holder, recessed - High-precision boring bar holder - Reduction sleeve - Rotating material stop - ER25 drilling and milling head with IKZ, i1:1, radial - Drilling and milling head ER25 with IKZ, i1:1, axial, increased to 100mm - Drilling and milling head ER25 with IKZ, i1:1, axial - Tool measurement Measuring probe for turret to determine the tool correction value (automatically swivels into the machining area for tool measurement when setting up the turret) - Extraction units - Air cleaner, mechanical AR VF, 5-stage for emulsion mist/smoke Due to the discontinuation of the trade, there is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring equipment, measuring machines, cooling medium etc. in high quality at a favorable price. Shipping, dismantling and loading costs can be reduced when buying several auction machines from the same seller.

Year of construction: 2022, Condition: new, we offer you our oil cooler to reduce the cutting oil temprature at CNC Turning Machine. Croln Eelzghpsikajb if you have some question please let us know.

Condition: used, Functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2455238, lifting height: 19,500 mm, overall weight: 10,900 kg, transport length: 4,740 mm, transport width: 2,440 mm, fuel type: diesel, color: blue, load capacity: 750 kg, Equipment: UVV, differential lock, Technical Data - Year of construction: 2007 - Drive: Diesel 4WD - Working height: 21.50 m - Platform height: 19.50 m - Load capacity: 750 kg - Platform dimensions with extension (LxW): 7.00 x 2.30 m Celjtyl Apen Eikasrb - Total weight: 10900 kg - UVV: new All-wheel drive, loader, differential lock, hour meter, platform control, fully functional, general signs of use

Condition: new, Exhibitor compressor Schneider compressor AM B 11-10 Operating hours 16 h Features: * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * Electronic AIR ENERGIE CONTROL 3 control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. * 1 year guarantee Technical data compressor AirMaster Professional Solo . H711100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.5 m³/min Compressor speed 6,115 min-1 Rated power drive motor (V/Hz) 11 kW (400 V / 50 Hz) Motor efficiency 91.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,800 m³/h Ambient temperature min. / max. +5°C / +40°C [?T] +18°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 65 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 266 kg Crelevf Sblon Eikajb

Condition: used, total length: 3,400 mm, lifting height: 6,550 mm, free lift: 2,260 mm, mast type: triplex, construction height: 3,350 mm, fork length: 2,400 mm, fork carriage width: 2,000 mm, drive type: Elektro, load capacity: 8,500 kg, construction width: 2,000 mm, net weight: 13,416 kg, Heavy-duty forklift truck - electric Load center: 600 Csln Ejt Dfahsikajrb Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Technical condition: Good Front tires type: Non marking Rear tires Type: Non Marking Tine adjustment ( IK - IK = 470 mm - 2.980 mm ) ( AK - AK = 770 mm - 3.280 mm

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL Crjln Eikeuhatpsaob - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: excellent (used), Year of construction: 2015, operating hours: 4,162 h, Functionality: fully functional, turning diameter: 100 mm, spindle speed (max.): 7,000 rpm, bar diameter: 36 mm, TECHNICAL DETAILS Number of axes: 10 (X1 / Z1 / Y1 / C1 / X2 / Z2 / Y2 / C2 / X3 / Z3) Number of spindles: 2 Number of turrets: 2 Main spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. Diameter of the main spindle chuck: 100 mm Min. resolution C-axis: 0.001° Counter spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. machinable diameter: 100 mm Minimum C-axis resolution: 0.001° Turret head 1 Celn Eikouv Eh Roaerb Number of positions: 12 Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW Turret head 2 Number of positions: 12 Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW MACHINE DETAILS Supply voltage: 400 V Space requirement: 3,682 x 1,430 mm Height of the machine: 1,900 mm Weight of the machine: 5,000 kg Switch-on time: 6,602 h Operating time: 4,162 h EQUIPMENT - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Part removal - Counter spindle prepared for pneumatic chuck - Optional: It is possible to purchase a large number of clamping devices as well as fixed and driven tool holders in high quality. (to be seen on the last pictures)

Condition: good (used), Manufacturer Thurm type B 20 R 100 L 4-2 HL H STR Engine number 12618430011409 power 3,7 / 4,4 kW speed 1.425 / 2.890 rpm Coln Eiomw Uncskajrb Shaft length Shaft diameter Weight 48 kg Dimensions Motor of milling machine Deckel FP3A CNC machine number 2206 - 0443

Condition: used, Functionality: fully functional, fuel type: diesel, color: red, Year of construction: 2012, machine/vehicle number: 2490178, Equipment: UVV, Technical data: * Working height 25.8 m * Loading platform length 1.4 m Creln Ejqya Sioikaob * Loading platform width 0.7 m * Reach 13.5 m * Passengers 2 * Payload 200 kg * Wheelbase truck 2.9 m

Condition: new, Exhibitor compressor Schneider AM B 7-10 Crslnsvap Uxs Eikaob Operating hours 4 h Features: * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * AIR ENERGIE CONTROL 3 electronic control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. * 12 months warranty Technical data compressor AirMaster Professional Solo . H707100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.1 m³/min Compressor speed 4,523 min-1 Rated power drive motor (V/Hz) 7.5 kW (400 V / 50 Hz) Motor efficiency 90.1 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,260 m³/h Ambient temperature min. / max. +5°C / +40°C [pressure difference T] +16°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 63 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 246 kg

Condition: used, Year of construction: 2023, operating hours: 5 h, load capacity: 8,000 kg, lifting height: 4,700 mm, free lift: 1,675 mm, mast type: triplex, construction height: 2,950 mm, fork carriage width: 2,000 mm, fork length: 2,400 mm, drive type: Elektro, Heavy-duty forklift truck - electric Load center: 900 Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: New machine Technical condition: New Cslet Dduken Eikaerb Front tires Type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 1120Ah Battery manufacturer: Hoppecke Battery type: PzS Battery year of construction: 2023 Battery condition: 80 - 100% Sideshift, 3rd valve, 4th valve, Full cabin with heating Complete lighting system Bluespot radio Clipboard with reading lamp Parabolic rear-view mirror

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC Cjln Esuhatcsikasrb - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, Functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2452568, lifting height: 16,500 mm, overall weight: 10,300 kg, transport length: 4,740 mm, transport width: 2,440 mm, fuel type: electric, color: red, load capacity: 500 kg, Equipment: UVV, differential lock, Technical Data - Year of construction: 2006 - Drive: Electric 4WD - Working height: 18.50 m - Platform height: 16.50 m - Load capacity: 500 kg - Platform dimensions with extension (LxW): 7.00 x 2.30 m Coln Eotylnloikajrb - Total weight: 10300 kg - UVV: new Loader, differential lock, hour meter, platform control, fully functional, general signs of use

Condition: new, Exhibitor compressor Schneider compressor AM B 5-10 Screw compressor Condition: like new Features: * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * AIR ENERGIE CONTROL 3 electronic control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. Technical data compressor AirMaster Professional Solo Cjlnjufp Hgo Eikaerb . H705100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.7 m³/min Compressor speed 3,175 min-1 Rated power drive motor (V/Hz) 5.5 kW (400 V / 50 Hz) Motor efficiency 89.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,080 m³/h Ambient temperature min. / max. +5°C / +40°C [?T] +14°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 62 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 241 kg

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC Coln Eijuhar Sokasrb - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, Functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2455328, lifting height: 19,500 mm, overall weight: 10,900 kg, transport length: 4,740 mm, transport width: 2,440 mm, fuel type: diesel, color: red, load capacity: 750 kg, Equipment: UVV, differential lock, Technical Data - Year of construction: 2006 - Drive: Diesel 4WD - Working height: 21.50 m Coln Eietyl Aijkajrb - Platform height: 19.50 m - Load capacity: 750 kg - Platform dimensions with extension (LxW): 7.00 x 2.30 m - Total weight: 10900 kg - UVV: new All-wheel drive, loader, differential lock, hour meter, platform control, fully functional, general signs of use

Condition: new, Exhibitor compressor Schneider compressor AM B 4-10 Condition: very good Celn Eiksufpz Roasrb * Simple handling thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * AIR ENERGY CONTROL 3B electronic control unit with display of operating hours, service messages, load hours, etc. Technical data compressor AirMaster Professional Solo . 4152052419 Compression end pressure 10 bar Working pressure Volume flow at working pressure (ISO 1217) 516 l/min Voltage 400 V Drive power 4 kW Weight 120 kg Noise 62 dB(A) Air outlet 3/4" Dimensions (W x D x H) 620mm x 630mm x 950mm

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/38 F - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer Celn Eijuhar Eekasrb

Condition: used, Functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2455328, lifting height: 19,500 mm, overall weight: 10,900 kg, transport length: 4,740 mm, transport width: 2,440 mm, fuel type: diesel, color: red, load capacity: 750 kg, Equipment: UVV, differential lock, Technical Data - Year of construction: 2006 - Drive: Diesel 4WD - Working height: 21.50 m - Platform height: 19.50 m - Load capacity: 750 kg Crslotyl Acsn Eikajb - Platform dimensions with extension (LxW): 7.00 x 2.30 m - Total weight: 10900 kg - UVV: new All-wheel drive, loader, differential lock, hour meter, platform control, fully functional, general signs of use

Condition: new, Exhibitor compressor Features: * Durable, V-belt driven compressor blocks * Motor and compressor protection against overheating * With integrated refrigeration dryer mounted on tank and fine filter * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: Celn Eieufp Hmokasrb . H705106 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.7 m³/min Compressor speed 3,175 min-1 Rated power drive motor (V/Hz) 5.5 kW (400V/50Hz) Motor efficiency 89.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,080 m³/h Ambient temperature min. / max. +5°C / +40°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 62 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1550 mm x 690 mm x 1560 mm Weight 338 kg Technical data refrigeration dryer DK 1200 SMART: Volume flow at pressure dew point +3°C 1200 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.27 kW Air connection 3/4 "a Refrigerant charge R134a

Condition: new, Exhibitor compressor Features: * Durable, V-belt driven compressor blocks * Motor and compressor protection against overheating * With integrated refrigeration dryer mounted on tank and fine filter * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: Crjln Eiouzn Spokasb . H707106 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.1 m³/min Compressor speed 4,523 min-1 Rated power drive motor (V/Hz) 7.5 kW (400V/50Hz) Motor efficiency 90.1 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,260 m³/h Ambient temperature min. / max. +5°C / +40°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 63 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1550 mm x 690 mm x 1560 mm Weight 346 kg Technical data refrigeration dryer DK 1200 SMART: Volume flow at pressure dew point +3°C 1200 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.27 kW Air connection 3/4 "a Refrigerant charge R134a