Used Gesan Dpr 100 for sale (40,378)

Condition: new, Year of construction: 2024, overall weight: 3,650 kg, warranty duration: 12 months, Standard Accessories Steel construction welded frame 3 Rolls are powered Hardened and ground shafts made of high tensile special steel Crjb Ettvju E Rk Nokob Rolls are hardened and ground Horizontal and vertical working position Hardened standard rolls Mobile control panel 3 Axis mechanical lateral angle guide rolls Brake motor equipped for the precision bending Digital Read-Outs (2pcs) Model PKH 100 Shaft diameter Ømm 100 Roll diameter Ømm 315 Working speed m/min 7 Motor power kW/V 7.5/380 Dimensions (L x W x H) mm 2000x1450x1700 Weight kg 3650

Condition: excellent (used), Year of construction: 2012, Arburg 375 V 500-100 Vertical Injection Molding Machine Year of manufacture - 2012 Closing system : Closing force : 50 Ton Opening force max KN/mm: 40/250 Mould height, fixed / variable min. Mm: 200 Ceboi Dahls Ettvksrb Daylight of plates fixed/variable max. Mm: 450-550 Weight of the moving half of the mold max kg: 230 Ejector force/jump max. kN/mm: 30/70 Injection unit 100 Auger diameter : 20 mm Effective screw length l/d 25 Injection volume : 31 cm3 Injection weight : 29 g /PS Machine weight3049 kg

Condition: used, Column-mounted slewing jib crane DEMAG type KBK 100 Year of construction approx. 2008 Load capacity 80 kg Slewing range 270° Projection 2500 mm Overall height 1980 mm Height to lower edge of jib 1580 mm - KBK 100 crane column - Boom profile DEMAG C-profile KBK 1 - Base plate L x W x H = 260 x 260 x 25 mm (4 holes Ø 18 mm) - painted yellow Cjb Ettoixxqysvksrb - Info about the short column, this jib crane was mounted on a machine stand. The last picture shows a jib crane hanging mounted dead weight approx. 100 kg good condition

Condition: used, Item: AV-11957-Vertical-Insulated Tank 100m3 Vertical Silos Tanks capacity 110.000 L Dimensions: Dia Ø3600/3900 mm Total H 13900 mm. Cylinder height 12300 mm. Vertical isolated tank - 1 pc. Isolated with 100 mm wool completed with stainless steel trapez plates. Jacket at the cylinder. Height under outlet 1500 mm. Cob Etouhnn Uotvkorb Year 1993. AISI 316.

Year of construction: 1992, Condition: ready for operation (used), Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once. Crjb Etotk Nx Estvkob

Condition: excellent (used), Year of construction: 1997, Face plate diameter 400 mmHeight 100 mm Crob Ettjd Tyu Sevkjb

Condition: new, Year of construction: 2025, ram adjustment: 85 mm, drop-through hole in table: 200 mm, table width: 700 mm, table length: 880 mm, stroke adjustment: 110 mm, pressing force: 100 t, table height above floor: 850 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 Cjbevxhprs Ettvkjrb o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg

Condition: refurbished (used), Year of construction: 2014, operating hours: 1,200 h, Functionality: fully functional, machine/vehicle number: 1312T04-901, total width: 2,200 mm, total length: 3,700 mm, total height: 2,900 mm, maximum load weight: 3,000 kg, outer dimension length: 3,700 mm, outer dimension width: 2,200 mm, heating capacity: 22 kW (29.91 HP), tank capacity: 90 l, type of input current: three-phase, inner dimension height: 510 mm, inner dimension length: 450 mm, inner dimension width: 450 mm, compressed air connection: 6 bar, overall weight: 3,000 kg, input voltage: 380 V, year of last overhaul: 2024, Automatic multi-chamber ultrasound system UCS ATS 6-100 (used) self-supporting frame construction made of aluminum profile with removable cladding parts made of stainless steel (material 1.4301). Welded stainless steel tanks (material 1.4571 2.0 mm) Crebjvyqqbe Ettvkob suitable for holding aqueous-alkaline (or aqueous-acidic) liquids surfaces pickled. tank bottom slanted height-adjustable feet ultrasound generators (integrated) electrical distribution cabinet as a standing cabinet (LWH 1200 x 500 x 2000 mm) can be set up up to 5 m from the system 5 sealing hinged lids 1 automatic lid (dryer)

Condition: used, power: 18 kW (24.47 HP), fuel type: diesel, overall weight: 1,860 kg, empty load weight: 1,693 kg, operation weight: 1,860 kg, tire condition: 100 %, Year of construction: 2024, operating hours: 20 h, total length: 280 mm, front tire size: 100%, rear tire size: 100%, maximum speed: 13 km/h, working width: 117 mm, Equipment: additional headlights, cabin, Operating hours: 20, hydraulic output: 36 l/min, engine manufacturer: Kubota, single lever control unit (electronic), earth shovel, hydraulic device locking system_____Bobcat S100 demonstration machine approx. 15 operating hours including earthmoving shovel 127 cm, storage location: 07806 Neustadt/Orla Ceb Ettovnlndsvksrb

Condition: ready for operation (used), Year of construction: 2003, max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg. Cebor Dd Iaj Ettvkorb

Condition: ready for operation (used), Year of construction: 2014, An 8-color C.I. flexo printing machine (central cylinder flexo printing machine) Flexotechnica is available. Film width: 1050mm, print width: 1000mm, print repetition: 280mm-800mm, print speed: 350m/min, colors: 8, plate thickness: 1.14mm + adhesive, ink base: solvent. Materials: OPP: 20µm-40µm, HDPE: 30µm-150µm, LDPE: 30µm-200µm, CPP: 30µm-90µm, web tension: 30kg. Including Rossini sleeves for 1.14mm and 2.54mm, 19x APEX anilox rollers, Desba Tec recycling unit and AFS corona pre-treatment unit. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Crjbjvuad He Ettvkob

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Cjbst E Tq Re Ettvksrb

Year of construction: 2000, Condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Cobjvdu N Ae Ettvkjrb

Year of construction: 1992, Condition: ready for operation (used), Press force: 1000kN, rapid traverse force: 100kN, retraction force: 100kN, overrun time: 0.053s, power: 18.5kW, table dimensions X/Y: approx. 1000mm/800mm, clearance: 600mm, max. stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. Stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. 1800mm/2200mm/3700mm, control panel dimensions X/Y/Z: approx. 800mm/800mm/1600mm, external control cabinet dimensions: approx. 1600mm/500mm/1200mm. Without feed unit. On-site inspection is possible. Crebovriqdj Ettvkeb

Year of construction: 1997, Condition: ready for operation (used), A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible. Ceb Etjvnd Snetvksrb

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. Crjb Etst E Tq Dstvksb

Year of construction: 2013, Condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Crjb Ettotyax Esvkob

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Creb Ettvsum U Sxekeb

Year of construction: 2007, Condition: ready for operation (used), A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible. Cjb Eevtqrxottvkorb

Year of construction: 2010, Condition: ready for operation (used), There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible. Creb Ettvou St I Rokjb

Year of construction: 1984, Condition: ready for operation (used), Table dimensions X/Y: 830mm/700mm, spindle diameter: 30mm, vertical stroke: 150mm, speed: 10000rpm, spindle swivel: -10°/+45°, motor power: 2.2kW, weight: approx. 240kg. On-site inspection is possible. Csb Ettovbig Dsvkerb

Year of construction: 2004, Condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Crjb Ettotufb Iovkeb

Condition: ready for operation (used), Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. Documentation available. On-site inspection is possible. Cjbjup Egxs Ettvkerb

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024. Ceb Ettvettbffokorb

Year of construction: 2023, Condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Cjb Ettevuafksvkerb