Used Gesan Dpr 100 for sale (40,408)

Year of construction: 2003, operating hours: 3,447 h, Condition: used, Functionality: limited functionality, fuel type: diesel, lifting height: 4,300 mm, mast type: triplex, construction height: 2,550 mm, engine type: Perkins 1004 40T mit 74 KW, drive type: Diesel, load capacity: 10,000 kg, net weight: 16,850 kg, machine/vehicle number: HR10972, Diesel forklift Chassis number: HR10972 Load centre of gravity: 600 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Gearbox: hydrostatic Condition: Ready for use and fully functional Technical condition: poor Front tyres type: bandages Front tyres condition: 40 - 60% Rear tyres type: bandages Rear tyres condition: 40 - 60% Description: Further equipment and price on request Cehxzf Njv Dn Ufocegt Side shift, fork positioner, 3rd valve, 4th valve, roof cover, windscreen, half cabin, soot filter, CE certificate, joystick, rotating beacon, seat, Joystick, ISRI air-suspended seat, compressed air brake system

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, 2 x TR chambers make Brunner and Hildebrand type HTR 100. 2 x 140 m³ year of construction:2006 Cehxzjvdrq Rsf Ncegt (length: 12,200 mm x depth: 6,400 mm x height: 4,260) complete with controls. All pipework and valves are included. If desired, including Brötje gas boiler built in 2012 in its own container.

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Cshxzf Nsi Ecacecjgt

Condition: good (used), Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IFA3002-BPKG/US-100-DPS -Weight: 30 g Cjhxzfsd Tqkbe Ncogt

Condition: new, Functionality: fully functional, Ferwood Code: R21000980 - Manufacturer Code: OTT1001725591 - Condition: New - Functionality: Fully functional - If interested we offer a revision service, contact us. Cgohxzf Novu Uw Uecst

Condition: excellent (used), Year of construction: 2010, • Panel Dimensions • Length: max. 1250 mm min. 20 mm • Width: max. 800 mm min. 50 mm • Thickness: max. 60 mm min. 10 mm • 4 clamping cylinders manually adjustable • Horizontal Drilling Aggregate with 1 Spindle • 1 Dowelling Tool (32mm from Drilling Spindle) • Glue injector with adjustable glue amount • Glue flow control • Standard Dowel Dimensions: 8x30 / 8X35mm Cohxzf Neup Augscjgt • Vibrating hopper for automatic dowel feed

Condition: used, mileage: 1 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, empty load weight: 1,471 kg, first registration: 02/2025, next inspection (TÜV): 02/2028, energy efficiency: A, color: white, number of seats: 2, fuel: diesel, Equipment: air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, Passenger airbag, side airbag, heated outside mirrors, electric windows, adjustable steering column, multifunction steering wheel, parking aid (PDC) sensors at the rear, partition without windows, wooden floor loading area lining, electric outside mirrors, Bluetooth hands-free system, height-adjustable driver's seat, USB connection, hill start assist, automatic start-stop system, traction control (ASR), outside temperature display, reversing camera, daytime running lights, head airbags at the front, central locking with remote control, DAB+ digital radio, emergency brake assistant, fatigue warning system, voice control, traffic sign recognition, steel rims, high beam assistant, summer tires, sliding door on the right, speed limiter, Android Auto, Apple CarPlay, spare wheel, lead vehicle---- Immediate information MICHAEL HUELSMANN. Errors and prior sale reserved. Stock number 117 Cgehxzjv Dl Rdef Ncot

Year of construction: 2010, operating hours: 4,786 h, Condition: excellent (used), Our X-ray inspection system from Dage is for sale. The system is in excellent condition. The system was serviced twice a year by the manufacturer. (Documents available) Type: Dage XD 7600 NT 100 HP including aluminum sample tray. X-ray on hours: 4786.4 hours The system has an XPlane function, with which it is possible to create a partial CT. The µCT tray is not required for this partial CT. We used the system for the following applications: • Analysis of electronic components (bonding wires, chip size, lead frame) • Void measurements • Solder penetration measurements • Analysis of circuit boards and assemblies (vias, conductor tracks, hidden solder joints such as QFNs, BGAs, solder joints, press-fit connections, crimp connections, rigid-flex circuit boards, etc.) Cohxzjv Hc Ryef Ncsgt • Analysis of components and solder joints under potting compound and/or paint • Analysis of aluminum die-cast parts for air inclusions and cracks • CT analysis of components • Analysis of plastic parts for cracks The system is expected to be available from the beginning of May and can be demonstrated until then. Please see the technical data below (documents).

Condition: ready for operation (used), Siemens 6AV9070-1AC00 Operating channel extension VS 100 E Stand A01 in opened OVP used 100% functional Cgehxzsi Edhqef Ncjt

Condition: excellent (used), White Type: WKL 100/70 Air-cooled with humidity -70 to 180°C Test chamber capacity approx. 100 liters Weight 210 kg Internal dimensions: Height 400 mm Width 470 mm Depth 345 mm External dimensions: Height 1776 mm Width 745 mm Depth 980 mm Data for mechanical stress: Maximum load on the test chamber floor 10 kg 10 kg per grate insert Total load on the grate supports 50 kg Data for operation: Test chamber lighting halogen bulb 24V, 50W Nominal voltage 1/N / PE AC 230 V ± 10% 50 Hz Nominal power 3.5 kW Nominal current 15.2 A Fuse provided by the customer 16A slow-blow Protection class Control cabinet IP 22 and control panel IP 54 Heat emission air-cooled test cabinets: Max. heat emission to the environment 2500 W Noise measurement Sound pressure level free field measurement at a distance of 2 m from the front and 1.0 m high approx. 59 dB(A) Characteristics for temperature tests Temperature range -70 to +180°C Temperature differences in steady state Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 1 K Temperature deviation spatially ± 1 to ± 2 K Temperature change rate Heating 3.5 K/min Cooling 3.5 K/min Heat compensation max. 700 W Characteristics for climate tests Data for humidification system Contents of the storage tank approx. 13 l Water quality Demineralized pH value 6 – 7 Conductivity max. 20 μS/cm Water consumption at constant temperature +40 °C, 92 %RH 2 l / 24 h Temperature range +10 to +95 °C Humidity range 10 to 98 %RH Temperature and humidity differences (in steady state) Temperature fluctuation over time in the middle of the usable space ± 0.3 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Humidity fluctuation over time in the middle of the usable space ± 1 to ± 3 %RH Flow through 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerant: R404A / R 23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone. Cgshxzovpgnuef Ncet

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 400134, 6 feeders and cover feeder, Trimmer, Belt delivery, Hohner stitching heads Cgehxzsvmxt Rof Ncst Machine no: 400134

Condition: good (used), Gyárto: Tria engine: 1.1 kW garat méret: 250x230mm Rosta méret: 40x10mm Cgjhxjvxrnrozf Ncjt

Year of construction: 2007, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Cehxeu U Hf Eszf Ncogt Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again

Condition: new, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: FA19-63709.1, pressure (max.): 5 bar, CSN instantaneous water heater type 97/DF-100 with 2-stage contactor control Instant water heater: Voltage: 400V 3 Power: 100kW Protection class: 54 Levels: 2x25/ 1x50 kW Cjhxzjvtrltjf Ncegt min/ max. temp.: 0/ +90°C Filling volume: 54 liters Control: Type: 200S01004002451903 S/N: FA19-62758.1 Voltage: 400V 3/PE AC 50 Hz Power: 100kW Protection class: IP 43 The instantaneous water heater type 97/DF-100 with STS 2 is a reliable solution for the efficient heating of liquids in industrial processes. With its robust design and precise temperature control, it is ideal for applications where constant and uniform heating is required.

Year of construction: 2014, Condition: used, Name: Dosing system for polymers Manufacturer: Alltech Type: Polymat 100 V8-1 FD Year built: 2014 Content: 1000 liters Conveying / dosing of: Liquid polymer # Chamber: 3 Control: Yes Material: Polypropylene Cgshxzfov D Unre Ncet Driving force: 3 x 0,37 kW Model: Horizontal Dimensions: L 2.200 x W 900 x H 1.600 mm Empty weight: 200 kg Technical doc.: Yes in PDF Condition: Second hand Price: On demand

Condition: used, Year of construction: 2005, 1 used crankshaft milling device in very good condition for mounting e.g. on a lathe for milling crankshafts or other milling work Make: SEMA, Origin Austria Model: SE 100 Year of manufacture: 2005 Technical data: Spindle holder ISO 50, concentricity / test mandrel L=300 mm = 0.01 mm Speed range, infinitely variable, currently set to 2,000 rpm Spindle is designed for up to 3,000 rpm Drive power currently 15 kW The milling spindle is designed for up to 25 kW Bearing diameter 110 mm The 2 screwed-on adapter plates under the milling spindle are each screwed on. These plates can be used for your lathe, reworked or may have to be newly manufactured. Screw-on surface of the milling spindle: L x W: 490 x 250 mm Accessories / special features: Milling spindle: Cgohxzf Njddziyjcet - The milling spindle is mounted on the face support of your lathe - Infinitely variable speed adjustment, LENZE frequency converter, designed for up to 30 KW - Clockwise / counter-clockwise rotation - Lifetime lubricated spindle bearings - Sturdy construction with hardened and ground spindle - High precision - Spindle with 2 bearings and 5 spindle bearings - Tool tightening via a threaded spindle - Mobile carriage with control panel - Emergency stop - Lockable main switch Drive gear for the main spindle: - A long drive rod is mounted in the spindle bore and connected to the gearbox - Infinitely variable speed adjustment, LENZE frequency converter - Clockwise / counterclockwise rotation - Jog mode Fast / slow The pictures show this unit mounted on a SARO SPA 10 x 3000 universal lathe for milling crankshafts. This lathe is not included in the scope of delivery! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Technical data for the pallet rack traverse: Shelving system: Dexion Type: P 90 Cgehxzf Novndr Ujcot The scope of delivery includes: 01x pallet rack traverse, used Material color: sendzimir galvanized Box profile: 100 x 50 mm Traverse type: BX100|50|13 Agraffe: 5 HK Clear width: 2,700 mm Max. load per pair of traverses 2,400 kg, with evenly distributed load 02x locking pin, used Design: sendzimir galvanized To secure the longitudinal beams Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Manufacturer: Tria Motor: 1.1 kW Cehxzfjvxrkte Ncsgt Funnel size: 250x220mm Sieve size: 40x10mm

Condition: excellent (used), Year of construction: 2006, turning diameter over bed 2000 mm turning diameter over slide rest 1600 mm turning length 22.000 mm turning diameter 2000 mm turning length 20.500 mm control SIEMENS SINUMERIK 840 D workpiece weight 70.000 KG total power requirement Hauptmotor 110 kW LATHE FOR HEAVY MACHINING Cehxzevanv Ujf Ncegt _____ CONVERSION TO CNC_____ 2006 _____TOP WIDTH_____ 22.000 mm _____MAXIMUM TURNING LENGTH_____ SUPPORT 1 20,000 mm SUPPORT 2 20,500 mm ___LARGEST TURNING DIAMETER ___ ABOVE SUPPORT 1600 mm ABOVE BED 2000 mm _____ WORKPIECE WEIGHT_____ Max. 70,000 KG _____PLANNING DISC_____ DIAMETER 2000 mm SPEED OF THE FACEPLATE, INFINITELY VARIABLE IN 4 STEPS 1.2 - 75 rpm MAXIMUM TORQUE AT CHARACTERISTIC SPEED 5.65 170,000 Nm MAIN ENGINE 110 kW LARGEST CLAMPING DIAMETER ON THE HEADSTOCK 1640 MM LARGEST CLAMPING DIAMETER ON THE TAILSTOCK 920 MM MOUNTING IN THE ROLLER BLOCK (PASSABLE) 2 PIECES 600 - 1290 mm MOUNTING IN STEADY RESTS (PASSABLE) 100 - 775 mm CONTROL SIEMENS SINUMERIK 840 D _____ SUPPORT 1 (TO THE HEADSTOCK) _____ TRAVEL OF THE UPPER SUPPORT 550 mm SLIDING MOVEMENT OF THE PUSHER 400 mm RAPID ADJUSTMENT LENGTHWISE (RAPID TRAVERSE) 3000 mm/min QUICK ADJUSTMENT FLAT (RAPID TRAVERSE) 1500 mm/min SLIDE HOLDER SITZMANN-HEINLEIN SYSTEM FEEDS STEPLESS FOR LONGITUDINAL 0.5 - 3000 mm/min FEEDS STEPLESS FOR FLAT 0.5 - 1500 mm/min _____ SUPPORT 2_____ MOVEMENT OF THE UPPER SUPPORT 550 mm SLIDING MOVEMENT OF THE SLIDER 400 mm RAPID ADJUSTMENT LENGTHWISE (RAPID TRAVERSE) 3000 mm/min QUICK ADJUSTMENT FLAT (RAPID TRAVERSE) 1500 mm/min SLIDE HOLDER SITZMANN-HEINLEIN SYSTEM FEEDS STEPLESS FOR LONGITUDINAL 0.5 - 3000 mm/min FEEDS STEPLESS FOR FLAT 0.5 - 1500 mm/min _____ RIDING STOCK_____ DIAMETER OF THE FACEPLATE 1200 mm QUILL DIAMETER 350 MM MAXIMUM ADJUSTMENT TRAVEL OF THE QUILL 150 mm CENTER POINT ANGLE 70° QUICK ADJUSTMENT ON THE BED 1850 mm/min _____ Revolutions of the faceplate per minute _____ 1st stage Motor speeds: 130 - 630 - 1575 Faceplate speeds: 1.2 - 5.65 - 14.2 2nd stage Motor speeds: 630 - 1575 Faceplate speeds: 10.8 - 27.2 3rd stage Motor speeds: 630 - 1575 Faceplate speeds: 15.5 - 38.8 4th stage Motor speeds: 630 - 1575 Faceplate speeds: 30 - 75

Condition: not inspected (used), Year of construction: 1976, Spitzl. Cylindrical grinding machine Nomoco M100 Offered here is a grinding machine from the company Nomoco of the type M100. Technical data: Manufacturer: Nomoco Type: M 100 year of manufacture: 1976 Cgohjhc S Spjxzf Ncjt max. grinding diameter: 100mm max. grinding length: 180mm grinding wheels: Ø 400mm max. grinding wheel width: 180mm weight: 3,2t grinding type: plunge grinding

Condition: used, Year of construction: 2011, operating hours: 4,286 h, fuel type: diesel, motor manufacturer: Perkins 2634/1500, Field of application: Construction Empty weight: 2.500 kg Generator capacity: 100 kVA Cjhxzfeu I I Spj Ncogt Please contact Sales Department for more information

Condition: used, Year of construction: 2006, SEMA SE 100 milling spindle unit, e.g. for the production of crankshafts Spindle holder flange Speed with this gearbox 97 rpm Cgjhxzfsddzi Ao Ncet Spindle is designed for up to 3000 rpm Drive power, currently 22 kW The milling spindle is designed for up to 25 kW Bearing diameter 110 mm Disc milling cutter SANDVIK Ø 700 x 25 mm Immersion depth of the disc cutter 235 mm Accessories / Special features: - Side milling cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings - Sturdy construction with hardened and ground spindle - High precision - Spindle with 2 bearings and 5 spindle bearings - Tool tightening via flange New price at the time: approx. 34,500.00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: VAZ100, color: blue, Wood shredder VAZ 100, feed opening 100 x 80 cm, feed channel height 160 cm. The machine has been completely overhauled and is in very good condition. All electric motors have been replaced. Main bearings have also been replaced. Drawer slide guides are almost as good as new. Hydraulic drawer, main rotor motor 7.5 kW Cehxzf Nsv En I Uecsgt The machine can be connected with a 32 A plug and can also be shown in operation on site if desired. The machine is immediately available and ready for use. Connection power 32 A

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Cgohev Dwi Esxzf Ncot

Year of construction: 1976, Condition: used, machine/vehicle number: 40 127 76, span the range of around: mit Spannfutter 115/48 (not available) 3 - 42 mm Cgehe Sxnpsxzf Ncot this maximum clamping: 345 mm span the range of around: mit Spannfutter 115/56 (not available) 5 - 50 mm this maximum clamping: 95 mm cutterhead speed: (RM 4) 740 - 1700/(ME 4) 580 - 1160 Upm spindle drive: 3 kW hydraulic drive: 4 kW space: Maschine 2100 x 1380 x 1880 mm weight: ca. 2000 kg