Used New Holland-Kobelco E195B El for sale (118,606)

Year of construction: 1988, Condition: ready for operation (used), top sheet hopper feeder Dceb E Sbsd Ad Nlswdog Built in 1988

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Dceb E Sbouv Eudowdsg Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 4,800 mm, loading space width: 2,120 mm, color: grey, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * Renault Master New Model 2025! * Premium all-aluminum body * Diesel particulate filter * Air conditioning * DAB radio with Bluetooth * OpenR Link 10" multimedia system * Navigation system (Google Maps) * Apple CarPlay * Android Auto * QI induction charging pad * RCall * Rear parking sensor * Driver fatigue warning system * Traffic sign recognition system * Crosswind assist * Heated windshield * Light sensor * Rain sensor * Lane departure warning * Emergency braking assist * ABS, ESP * 80-liter fuel tank * Extra-long, electrically adjustable exterior mirrors * On-board computer * Start/stop function * Mud flaps * Diesel particulate filter (EURO 6E) * Driver's airbag * Multifunction steering wheel * Power steering * Cup holder * Full-size spare tire * Fire extinguisher * Electric. Power windows * On-board computer * Central locking with remote control * Fabric seats * Side underride protection for cyclists * Lockable toolbox * Loading area lighting * Remote-controlled nylon cable winch * Extendable ramps (movable) * Additional short loading ramps * 2 wheel stops * LED rotating beacon * Long wheelbase * LED side marker lights * LED daytime running lights * LED low beams * Fog lights * Additional air suspension on the rear axle * 2500 kg tow bar * Additional tow bar and 12V power connection for transporting a trailer on the loading area If the vehicle is not in stock, short delivery times are possible! * Ask us about a customized leasing or financing offer * Net export possible * Delivery from 199 € Didn't find the right vehicle? Deb E Sbwov Rkn Usdjcg Configure your own vehicle! Whether it's equipment, body, or engine variant, all at a fair price! You can also purchase the body kit for your existing vehicle from us! Don't hesitate to contact us! * Images may show optional extras that are not included in the base price. *----*The information provided online is a non-binding description. It does not represent guaranteed features. The seller is not liable for typos or data transmission errors, changes, or input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors and prior sale excepted. This advertisement is to be understood as an invitation to submit an offer.

Condition: used, mileage: 10,158 km, power: 129 kW (175.39 HP), first registration: 12/2007, overall weight: 18,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 8,080 kg, empty load weight: 9,920 kg, fuel: diesel, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, Year of construction: 2007, operating hours: 10,158 h, total length: 9,030 mm, number of seats: 2, construction height: 3,220 mm, Equipment: ABS, air conditioning, parking heater, trailer coupling, The Terberg BC 182 Kamag Wiesel WBH 25 transfer vehicle is a robust and versatile commercial vehicle, ideal for use on industrial sites and in logistics centers. The vehicle is equipped with a fifth wheel and has a dual-line braking system for additional safety. It is powered by a Mercedes OM904 LA engine with an output of 129 kW (175 hp). The ZF3WG161 automatic transmission ensures smooth gear changes, while the axles in cooperation with Volvo and Axie Tech ensure stability. First registered in December 2007, this model is in a used but good condition and has 10,158 operating hours on the clock. The yellow one with a height of 3,220 mm, width of 2,500 mm and a length of 9,030 mm offers a practical size for a wide range of applications. The equipment highlights include air conditioning, a Webasto auxiliary heater and various trailer connections for flexible use. In addition to the proven technology, the Terberg BC 182 offers a comprehensive range of services, including possible delivery throughout Germany for an additional charge. The vehicle can be viewed without prior registration, which allows interested buyers to easily inspect the vehicle and adapt it to their specific needs. Additional heater. Emergency seat. Hook lock. AKH rear all trailer connections on the left in the direction of travel, trailer coupling at the front with air and electrical connections and lifting arm with 2 lifting cylinders on the vehicle frame, 2`` cast steel plate, 2-line brake system for fifth wheel coupling including electrical connections. Engine: Mercedes OM904 LA Deb E Sbor Uzq Aswdscg Gearbox ZF3WG161, axles: front Volvo, rear from Axie Tech 10158 Bh (operating hours) Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: like new (used), Year of construction: 2014, Chiller for sale as good as new. Was only used for test purposes for a short time. Dceb E Sera Dy Iobwdog Technical data see data sheet picture. Only 1 piece available!

Condition: new, overall weight: 19 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER NT 90/2 ME CLASSIC ANNIVERSARY EDITION VACUUM CLEANER: Model: NT 90/2 ME CLASSIC ANNIVERSARY EDITION Manufacturer: KARCHER Catalog number: 1.667-700.0 Type: Industrial vacuum cleaner for wet / dry work Country of production: Germany Series: Professional Condition: NEW Number of suction turbines: 2 Maximum power (W): 2300 Djb E Sbsv Txnbewdocg Air flow (l / s): 2 x 53 Voltage (V): 230 Vacuum (mbar / kPa): 225 Tank capacity (l): 90 Bagless operation: Yes Wet operation: Yes Power cord length (m): 7.5 Dimensions (length × width × H) (mm): 580 × 510 × 995 Weight (kg): 19 WHY CHOOSE THE KARCHER NT 90/2 ME CLASSIC ANNIVERSARY EDITION VACUUM CLEANER? Whether it's dust, coarse dirt or liquids, the powerful NT 90/2 Me Classic vacuum cleaner has an extra large 90-litre tank for collecting large quantities of all types of dirt and is characterized by easy handling. The high-quality, robust dual-engine all-purpose vacuum cleaner is equipped with a standard push handle and an extremely robust chassis with metal wheels. The machine is also equipped with a highly efficient cartridge filter and a practical drain hose. Thanks to its spacious 90-litre tank, the dual-engine all-purpose vacuum cleaner NT 90/2 Me Classic Anniversary Edition can vacuum large quantities of wet and coarse dirt. Exceptional suction power, handling and quality. The device impresses with its exceptional efficiency and maximum freedom of movement during thorough cleaning of upholstery, carpets, as well as other textiles in any industry. EQUIPMENT OF THE KARCHER NT 90/2 ME CLASSIC ANNIVERSARY EDITION SET: Suction hose length: 2.5 m Elbow: Plastic Number of suction pipes: 2 pcs. Suction pipe length: 550 mm Suction pipe material: Steel, chrome-plated Universal nozzle width: 360 mm Crevice nozzle Cartridge filter: Paper Drain hose Stainless steel tank

Condition: used, mileage: 46,583 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,430 mm, overall weight: 3,100 kg, empty load weight: 2,167 kg, maximum load weight: 933 kg, first registration: 08/2023, color: black, suspension: other, number of seats: 8, total length: 5,370 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, Interior paneling, 2 sliding door(s), disc brakes, extra-long, touchscreen, clock & tachometer, brake pad indicator, dimming exterior mirrors, 360-degree camera, heat-insulating glass, metallic, 5-door, 1st hand, Euro6d_Temp, green environmental sticker (4), breakdown kit, Apple CarPlay, Android Auto, tinted windows (privacy glazing), distance warning, reversing camera, black, front side airbags, passenger airbag, front window/head airbags, right sliding door, left sliding door, color monitor for navigation system, shift paddles, front parking sensors, rear parking sensors, parking aid, parking aid camera, 2 electric windows, heated seats, live information system, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, automatically dimming interior mirror, power steering, electric exterior mirrors, brake assist, adaptive cruise control, comfort seats, removable tow bar, Rear-wheel drive, 3rd brake light, center armrest, country version Germany, other equipment available, errors and prior sale reserved. Trade-in possible. Financing possible, please contact us, we will create a tailor-made offer for you. BA3 Active Brake Assist BH1 HOLD function BS1 Brake calipers with Mercedes-Benz lettering C70 Pedestrian protection C74 Illuminated Mercedes-Benz entry lettering CF8 Sports suspension CL1 Height and tilt adjustable steering wheel CL3 Leather steering wheel CL4 Multifunction steering wheel with trip computer CU4 Aerodynamics package E07 Hill start assist E1 D Digital radio (DAB) E1 E Navigation E1 F Display diagonal 26 cm (10.25") E1 T Touchpad E6 5 Burmester surround sound system E6 M BUX Multimedia system Mid ES2 12 V socket in trunk / load compartment ES3 12 V sockets for rear seat rows right and left ET4 Active Distance Assist DISTRONIC EW6 Remote Services Plus preparation EX9 3 years of free map data updates EY2 Preparation for Live Traffic Information EY5 Mercedes-Benz emergency call system EY6Breakdown management EZ6Parking package with 360° camera EZ8PARKTRONIC F48Heating for Sc Dcsb E Sbwsv Rgn Rjdeg

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Djb Esuv Ewro Sbwdocg Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: new, Unused bin washer. Bought for a contract which never materialised. Dcsb E Sotpv T Nsbwdjg

Condition: used, Year of construction: 2001, clamping force: 60 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Djb E Sbweh Nvnwsdjcg Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: used, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, wheelbase: 4,215 mm, overall weight: 3,500 kg, first registration: 02/2025, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 400 mm, loading space volume: 3.5 m³, emission class: euro6, color: white, number of seats: 3, construction height: 2,283 mm, working width: 2,070 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Navigation via mobile phone possibleAir conditioning, central locking with remote control, electric exterior mirrors. adjustable and heated, electric front windows, on-board computer, cruise control, multifunction steering wheel, partition wall, light and rain sensor, LED daytime running lights, radio, touchscreen, hands-free system, Apple CarPlay, Android Auto, heat-insulating glazing, rev counter, driver's side airbag, anti-lock braking system (ABS), traction control (ASR), seats in the driver's cab: lumbar support in the driver's seat, automatic start/stop, soot particle filter, immobilizer, side marker lights, outside temperature display, power steering, interior filter: pollen filter, seats in the driver's cab: mechanically suspended driver's seat, seats in the driver's cab: driver's seat with armrest, seats in the driver's cab: multifunctional double passenger seat, seats in the driver's cab: height-adjustable driver's seat, storage gallery, electric brake force distribution, brake assist, steering column (steering wheel) height-adjustable, electronic. Stability program (ESP), generator 185 A, body/structure: flatbed, wheelbase 4332 mm, drive type: front-wheel drive, 6-speed gearbox, model update (2), permissible. Gross vehicle weight 3.50 t, flatbed body, flatbed body with ladder rack, storage box below the flatbed/body - right, wood paneling in the cargo/engine compartment, front mud flaps, gearshift indicator Financing Example Dcjb E Sbwsv Nv S Nodsg * Cash price: €43,661.00 * Down payment: €8,732.00 * Term: 60 months * Net loan amount: €34,929.00 * Effective annual interest rate: 6.19% * Nominal interest rate (fixed) p.a.: 6.02% * Gross loan amount: €40,537.00 * Monthly installment: €676.00 *Representative financing example from Santander Consumer Bank AG, Santander-Platz 1, 41061 Mönchengladbach, for private customers for whom the dealership acts as a loan broker. Creditworthiness required. The information also corresponds to the 2/3 example according to Section 6a Paragraph 3 of the PAngV (PanV). Over 150 vans and buses in stock. Financing or leasing is possible through Santander Consumer Bank, Bank 11, or Auto Europa Bank. We would be happy to advise you. This offer is non-binding; no guarantee is given for equipment details. Listed equipment may be checked separately. Subject to changes, errors, and prior sale. Delivery is possible for an additional charge. Export license plates are available on-site. Trade-in of your old vehicle is possible. Retrofitting of: - Trailer hitches up to 3500 kg possible - Auxiliary heaters - Screen for rearview camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting a tail lift (LBW) and other customized solutions for your business needs are available for an additional charge.

Condition: new, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 44 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HD 6/15 G CLASSIC WASHER: Model: HD 6/15 G Classic Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (factory packed) Thread Type: KARCHER M22 Series Power Supply (Exhaust): Petrol Pumping Capacity (l/h): 600 Working Pressure (bar/MPa): 150 / 15 Maximum Pressure (bar/MPa): 200 / 20 Mobility: Ultra Pump Type: CRANK ROD (brass) Weight (kg): 43.6 Dimensions (L x W x H) (mm): 878 x 538 x 702 EQUIPMENT OF THE KARCHER HD WASHER 6/15 G CLASSIC: Pressure gun: Karcher Classic 300 BAR - M22 High pressure hose: Karcher Classic 10M, DN6, M22-M22 Spray lance: Karcher 600mm Classic Nozzle [1]: Power nozzle with a 25° flat stream. Flat high-pressure stream with high surface efficiency and good dirt loosening force Deb Esv Txawo Sbwdocg RELIABLE | DURABLE | ERGONOMIC Independence from external power sources. Compliant with the requirements of the EU STAGE V exhaust emission standard. Convenient, manual start. Puncture-proof wheels. The compact and small device is very easy to maneuver in limited areas. Fits in a car. Additional handles allow the device to be transported with additional equipment. Brass pump head that affects the extension of the device's service life. Solid tubular construction protects the pump from damage. Safety valve on the high-pressure pump and water filter. Crank pump with ceramic pistons The device is completely new and factory-packed in a cardboard box.

Condition: new, Year of construction: 2019, operating hours: 10 h, Functionality: fully functional, MACHINE BRAND NEW - WORKED 10h The machine has undercutters for gluing furniture boards - it is a universal machine, it can glue in a zigzag and on a line. FAMAD PDFE 2-tenoning line - with a magazine Year of production 2019 The PDFD line consists of two basic components: a DFC 60 milling-tenoning socket (where the ends of the strips are processed) and a PHSL press for joining to length, on which the elements are joined into a strip up to 6.6 m long with the possibility of programming up to eight intercuts dividing the strip into sections of a length programmed by the service. Between these basic devices there are transport devices that also perform the function of pre-tenoning. The presented line configuration allows for the achievement of an efficiency of approx. 8,000 m/shift. The microprocessor control system allows for flexible adjustment of operating parameters to the user's needs. The presented machine has the ability to process "calzing" type elements as well as elements for the production of countertops (connected "on a line"). The use of a receiving table with automatic feeding of strips to the PHSL press input conveyor allows the line to be operated by one employee feeding the elements. The receiving table is equipped with a buffering screen that increases efficiency and smoothness of work. The line operates in an automatic cycle with manual feeding of material. The components of the line can be assembled in various (agreed with the recipient) configurations enabling the machine to be adapted to the user's local conditions. Technical and operational data: Width of the milling-tenoning machine input package mm 650 Width of glued elements mm 30 ÷ 155 Dob E Sbsv A Tb Iswdjcg Length of glued elements mm 170 ÷ 900 Thickness of glued elements mm 20 ÷ 70 Working air pressure MPa 0.6 Compressed air demand m3/h approx. 25 Working efficiency cycles/min. up to 4 (6600 strip) Length of glued element mm 4500 ÷ 6600 Working voltage V AC 3/N/PE 400 V 50 Hz Control voltage V DC 24 Power demand kW max 100

Condition: used, Year: 2014 Type of inspection: NC5 Number of hours: 39,660 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 420 tons Opening stroke: 770 mm Between columns: 820 x 820 mm Plate dimensions: 1200 x 1200 mm Minimum/maximum mold: 350/1020 mm Maximum gap between plates: 1790 mm Screw diameter: 60 mm Screw length: 25T cm3: 763 Bars: 2106 Motor power: 135 kW Heating power: 27.9 kW Closing weight: Dceb Ejv I Uz Hs Sbwdjg Injection weight: 24 tonnes Length dimensions: 8 m Width dimensions: 2.2 m Height dimensions : 2.70 m Robot interface: YES Bi-metal: YES Other: 2 BLOW GUNS, 3 batteries on injection, 16 hot runners, pneumatic shutter nozzle, 3 programmable inputs, mixer/mixer tip screw

Condition: like new (used), Complete coating and frying line available for immediate sale. Bought new in 2023 and used for two mornings only. All machines manufactured 2022 and 2023 with the exception of preduster which was previously a demonstration machine. We can supply with a former and freezing equipment at extra cost. Deb E Sbjvcqmuswdscg

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Video available on our website. Electric 400 Volt Hand control panel Hydraulic-device Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m². Dcob E Sbwsk Rfwtsdsg

Condition: new, operating pressure: 130 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 69 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 5/13 U ANNIVERSARY EDITION WASHER: Model: HDS 5/13 U ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (waster packed in factory) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 500 Working pressure (bar/MPa): 125 / 12.5 Maximum pressure (bar/MPa): 150 / 15 Maximum temperature (°C): 80 Fuel consumption (kg/h): 3.1 Connection power (kW): 2.6 Power cable (m): 5 Weight with packaging (kg): 69 Dimensions (L x W x H) (mm): 618 × 618 × 994 EQUIPMENT OF THE KARCHER HDS 5/13 U ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce High pressure hose: Karcher Professional 10M, DN6, 250BAR - !EasyLock Spray lance: Karcher Professional 840 mm !EasyLock Nozzle: Karcher Professional three-stage nozzle (0°/25°/40°) !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort. Due to its small size, the device can work wherever it is difficult to reach, or where it is often necessary to work in different places. Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. EASY!Force technology reduces the force needed to hold the gun trigger to zero. KARCHER 90th anniversary version! Dcsb E Sbev Tw Sfswdeg Automatic pressure reduction after switching off the device The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed.

Condition: new, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 113 kg, warranty duration: 24 months, TECHNICAL DATA OF THE HDS 7/16-4 C ANNIVERSARY EDITION WASHER: Model: HDS 7/16-4 C ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pressing capacity (l/h): 270 - 700 Working pressure (bar/MPa): 30 - 160 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 5.1 Power cable (m): 5 Fuel tank (l): 10 Weight (kg): 113 Dimensions (length x width x height) (mm): 1060 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 7/16-4 C ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High pressure hose: Karcher Professional 10M, DN6, 250BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and comfort of work. Due to its small size, the device can work everywhere where it is difficult to reach, or you often have to work in different places. Djb E Sjv Tw I Tebwdecg Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. The standard EASY!Force high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed.

Condition: new, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 101 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 6/15 C WASHER: Model: HDS 6/15 C Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 260 - 560 Working pressure (bar/MPa): 30 - 150 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 3.4 Power cable (m): 5 Fuel tank (l): 15 Weight (kg): 101 Dimensions (length x width x height) (mm): 1066 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 6/15 C WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional 10M !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC eco!efficiency mode - economical and environmentally friendly, even during longer periods of use - Reduces fuel consumption and CO₂ emissions by 20%. Easily accessible water filter protects the pump from impurities in the water. Dsb E Sbwsv Tng Hjdjcg Safety valves, protecting against lack of water and fuel Water softening system to protect the heating coil from scale deposits. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the service life of all pump components on the high-pressure side. Practical handles on the housing + integrated nozzle storage A built-in funnel for filling the cleaning agent prevents accidental spillage of chemicals. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows 5x faster equipment changes than a traditional thread system. The device is completely new and factory-packed

Condition: new, operating pressure: 170 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 130 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 9/17-4 C CLASSIC WASHER: Model: HDS 9/17-4 C Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (waster packed in factory) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 290-900 Working pressure (bar/MPa): 130 / 13 - 170 / 17 Maximum pressure (bar/MPa): 210 / 21 Fuel consumption (kg/h): 5.6 Dob E Sbwsv Tnfpjdscg Connection power (kW): 6.5 Power cable (m): 5 Weight with packaging (kg): 129.8 Dimensions (L x W x H) (mm): 1060 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 9/17-4 C CLASSIC WASHER: Pressure gun: Karcher Professional !EasyForce High-pressure hose: Karcher Professional 10M, DN6, 250BAR - !EasyLock / !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with a 25° flat stream. Flat high-pressure stream with high surface efficiency and good dirt loosening force. RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort. Due to its small size, the device can work wherever it is difficult to reach, or where it is often necessary to work in different places. Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. The standard includes an EASY!Force high-pressure gun with a rotating lance, a 10m high-pressure hose and a power nozzle. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed.

Condition: new, operating pressure: 210 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 161 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 10/21-4 M CLASSIC WASHER: Model: HDS 10/21-4 M CLASSIC Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): >98 Connection power (kW): 7.5 Power cable (m): 5 Weight (kg): 161 Dimensions (length x width x height) (mm): 1075 x 722 x 892 EQUIPMENT OF THE KARCHER HDS 10/21-4 M CLASSIC WASHER: Pressure gun: Karcher Professional !EasyForce Classic High-pressure hose: Karcher Professional - 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort Djbev Tnbks E Sbwdecg 4-pole motor, water-cooled Two detergent tanks separated from each other Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. The standard EASY!Force Advance high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: new, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 157 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 11/18-4 S ANNIVERSARY EDITION WASHER: Model: KARCHER HDS 11/18-4 S ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (waster factory packed) Type: HOT WATER Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 550-1100 Working pressure (bar/MPa): 180 / 18 Maximum pressure (bar/MPa): 210 / 21 Fuel consumption (kg/h): 6.5 / 5.2 Dsb Eev Tm A Ho Sbwdscg Connection power (kW): 7 Power cable (m): 5 Fuel tank (l): 25 Weight with packaging (kg): 157.7 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 EQUIPMENT OF THE KARCHER HDS 11/18-4 S ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional 10M, DN8, 400BAR - !EasyLock / !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with a 25° flat stream. Flat high-pressure stream with high surface efficiency and good dirt loosening force. RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort. Large wheels with rubber tires and ergonomic push handles make transporting the machine much easier. Built-in storage for a wide range of accessories. Includes 2 hooks for the suction hose and power cable. Large storage for cleaning agents, gloves, tools, etc. As standard, the EASY!Force high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle. EASY!Force technology reduces the force needed to hold the gun trigger to zero. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the service life of all pump components on the high-pressure side. The device also has the EASY!Lock equipment mounting system that allows changing equipment 5x faster than the traditional thread system. A well-thought-out operating concept with an intuitive control panel ensures easy operation The device is completely new and factory-packed.

Condition: new, Functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 172 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 11/18-4 S BASIC WASHER: Model: HDS 11/18-4 S Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW (waster packed in factory) Type: HOT WATER Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 550-1100 Working pressure (bar/MPa): 180 / 18 Maximum pressure (bar/MPa): 210 / 21 Fuel consumption (kg/h): 5.9 Connection power (kW): 8 Power cable (m): 5 Weight with packaging (kg): 172.5 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 EQUIPMENT OF THE KARCHER HDS 11/18-4 S BASIC WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional 10M, DN8, 315BAR - !EasyLock / !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with a 25° flat stream. Flat high-pressure stream with high surface efficiency and good dirt loosening force. Dcsb E Sjv Tmuiebwdjg RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort. Large wheels with rubber tires and ergonomic push handles make it much easier to transport the machine. Additional handles make it possible to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. The standard EASY!Force high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. A well-thought-out operating concept with an intuitive control panel ensures easy operation The device is completely new and factory-packed.

Condition: new, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 157 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 13/20-4 S CLASSIC WASHER: Model: HDS 13/20-4 S CLASSIC Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 600 - 1300 Working pressure (bar/MPa): 30 - 200 Maximum pressure (bar/MPa): 230 Dsb Ejv Tbtte Sbwdscg Water heating range (°C): 80 Connection power (kW): 9.3 Power cable (m): 5 Weight (kg): 157 Dimensions (length x width x height) (mm): 1075 x 722 x 915 EQUIPMENT OF THE KARCHER HDS 13/20-4 S CLASSIC WASHER: Pressure gun: Karcher Professional !EasyForce Classic High pressure hose: Karcher Professional - 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and comfort of work Solid tubular construction protects the pump from damage Easy access for easy service and maintenance of components Safety valve on the high-pressure pump High efficiency with low emissions and long service life Long operation thanks to a 30-liter fuel tank Two detergent tanks separated from each other Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, 10m high-pressure hose and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is brand new and factory packed

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 210 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 62 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 10/21-4S NEW HEAD The device has new accessories, including a German brand R+M gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 210bar and 1000l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: 3 phases - 400 V - 50 Hz Pumping capacity (l/h): 1000 Working pressure (bar): 210 Maximum pressure (bar): 250 Connection power (kW): 8 Weight (kg): 62 Dimensions (length x width x height) (mm): 560 x 500 x 1090 Hose length (m): 10 EQUIPMENT: NEW HEAD NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw connectors - FREE Dcjbov S Euxj E Sbwdsg KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service