Used Claas Axion 820 C-Matic for sale (40)

Condition: used, Year of construction: 2022, operating hours: 4,300 h, maximum speed: 50 km/h, Equipment: all wheel drive, compressed air brake, Claas Axion 850 Cmatic CIS+ Year of manufacture: 2022 Currently 4,300 operating hours Equipment: 600/70 R30 Mitas SFT / fixed rim / wide track width 710/70 R42 Mitas SFT / fixed rim CLAAS front linkage 4.6 t External control for front linkage 3-point cast weight 900 kg CIS+ operating terminal, color display CMATIC incl. 2 engine speed memories (CIS+) Task Control Basic activation, on tractor side AUTO PILOT / GPS PILOT Ready TELEMATICS advanced license – 1 year Ppjdpfxewblkks Agpjl CLAAS Remote Service incl. five-year license ELECTROPILOT with reverse function Steering interface prepared Steering interface activation Electronic hitch control, standard EHC Rear hitch lower links, catch hooks Cat. 3 Lower link stabilizers, automatic Long hydraulic top link, catch hooks Cat. 3 Drawbar support with insert for swinging drawbar Swinging drawbar with ball coupling Automatic trailer hitch Compressed air brake system (dual and single-circuit prep.), incl. air dryer Hydraulic system load-sensing, variable pump 150 l/min, 200 bar 4 spool valves, electrohydraulic proportional Power Beyond, load-sensing couplings with flat-face connectors CMATIC - stepless transmission 50 km/h transmission ratio PROACTIV front axle with brakes PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6-spline and 1 3/4" 6-spline Parking brake on REVERSHIFT lever CMATIC 2.0 - cruise control deactivation via drive pedal (CIS+) 264 hp max. output, 261 hp homologated nominal output, ECE R 120 Main battery switch, electronic Air compressor Engine brake Cab with 4-point suspension Roof with sunroof, rear-opening Rear window for 4-post cab, tinted Rear window wiper, incl. right side wiper Electric mirror, incl. wide-angle mirror Rear fender extensions, rear fender outer width 2.75 m Removable toolbox, left Additional interface sockets 2 auxiliary driving headlights, A-pillar Oversize tail lights, halogen with warning boards 4x halogen driving lights, 2x halogen work lights bonnet Work lights halogen: 4x front roof, 4x rear roof Working lights LED – premium Comfort seat, fabric, semi-active lateral suspension Passenger seat with safety belt Automatic climate control, incl. preparation Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system Internal No.: 11060349

Condition: used, Year of construction: 2019, operating hours: 3,000 h, power: 173 kW (235.21 HP), front tire size: MICHELIN 540 /65 R30, rear tire size: TRELLEBORG 650 /65 R42, Equipment: air conditioning, all wheel drive, compressed air brake, Front linkage | Claas Axion 830 Cmatic cebis Year of construction 2019 approx. 2600 operating hours Equipment: CLAAS front power lift 4.6 t CEBIS control terminal with touch function CMATIC incl. 2 speed memories + CSM, CEBIS AUTO PILOT Electron. Linkage control, standard EHR Hydraulic top link long, catch hook cat. 3 5 + 2 control units, electrohydraulic proportional Center axle control units with FKH assignment and 1x dw/front +1x dw/front Power Beyond, load-sensing connections without flat-face coupler 40 km/h PROACTIV front axle PTO shaft 540/540 ECO + 1000 rpm 235 hp max. power, 240 hp homol. rated power, ECE R 12 Ppsdeudp Ubopfx Agpjl including steering system S10 without front weight | Internal no.: 11236543

Condition: new, Year of construction: 2025, operating hours: 1 h, Equipment: all wheel drive, Claas Arion 660 Cmatic CEBIS New machine, year of manufacture 2025, approx. 5 operating hours Specification: 540/65 R30 Mitas AC65 / fixed rim 650/65 R42 Mitas AC65 / fixed rim CLAAS front linkage 4.0 t incl. vibration damping Electronic position control for front linkage Reinforcement frame for transmission, engine side rails for front loader External control for front linkage CEBIS control terminal with touch function CMATIC incl. engine speed memory plus CSM, CEBIS ISOBUS pre-installation, rear Task Control Basic activation, tractor side CEMOS demo version – 400 h AUTO PILOT / GPS PILOT Ready SAT 900 GNSS receiver - RTK NET activation CLAAS communication module (LTE) CEMIS 1200 terminal ISOBUS activation for CEBIS GPS PILOT activation – SAT 900 GNSS receiver Data volume for RTK NET usage – 5 years ELECTROPILOT Machine Connect license – 5 years Video function activation CEBIS + CPC in-cab connection for 2 cameras Steering interface prepared Electronic hitch control (EHR) Lower links Cat. 3 with stabilizer hooks Automatic lower link side stabilizers Hydraulic top link, stabilizer hooks Cat. 3 Hitch block with sliding drawbar Rear linkage, increased lifting capacity Automatic drawbar with 38 mm pin diameter Ball set Cat. 3/2 Compressed air brake system (2-circuit) Automatic trailer stretch brake Hydraulic system load-sensing 150 l/min 4 + 2 spool valves, electrohydraulic proportional (CEBIS) 2 front couplers / 1 pressureless return Power-Beyond, LS connections without flat face coupler CMATIC transmission, stepless Transmission ratio 50 km/h Front axle PROACTIV with wet disc brakes Rear axle, standard, 275 mm PTO 540/540 ECO rpm Pjdpfx Asx R N S Rjgpspl PTO stub shaft 6-spline, 1 3/8 Steering angle sensor for braked PROACTIV front axle 205 hp max. output, 196 hp homologated rated output, ECE R 120 Main battery switch, electronic Fuel tank 370 l 4-post cab with 4-point suspension Roof with glass hatch Tinted rear window for 4-post cab Rear window wiper, incl. right-side wiper Electric mirrors, incl. wide angle mirror Fender extensions 2.55 m overall width, wheel diameter less than 1.93 m 2 terminal rails, roof liner and A-pillar Removable toolbox, left Additional interface sockets 2 LED front headlights, A-pillar Rear lights, standard, LED with warning panels 4x LED driving headlights, 2x LED work lights on hood LED work lights – premium LED work lighting – premium Comfort seat, fabric, semi-active longitudinal/horizontal suspension Passenger seat with seatbelt Automatic climate control, incl. Cat. 3 preparation Radio sound system, digital (DAB+) Steering wheel, leather 2 LED beacons, foldable LED equipment package premium Connect Package II – Documentation, Guidance Driver Package Premium | Internal no.: 11283707

Condition: used, Year of construction: 2014, with front mower Disco 3200 FC / Pjdpfx Aotlry Ssgpopl

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar 7 disc modules with 2 blades each Pedpsxf U N Uofx Agpjpl incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146

Condition: new, Year of construction: 2024, operating hours: 1 h, working width: 9,500 mm, Cutter bar: Discs | CLAAS Disco 9700 C Contour New from 2024, not yet completed - Large-area mower for rear tractor mounting, Category III - Working width 8.80 m - 9.50 m, hydraulically adjustable - Main frame with optimized center of gravity thanks to angled rearward-mounted booms - Low-speed concept with speed reduction to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines Equipment: Wear skids 3-point hitch Wide-spreading system 1 3/8" PTO shaft, 6-piece ISOBUS cable External protective covers, hydraulically foldable Automatic slope control Pedjwbaytjpfx Agpopl Claas Disco 3200 FC front mower available as an option | Internal No.: 11180889

Condition: used, Year of construction: 2023, operating hours: 1,300 h, power: 113 kW (153.64 HP), Equipment: air conditioning, all wheel drive, front linkage, Errors and prior sale excepted! Internal number: 1334. 7302669 ----EQUIPMENT 40 km/h * Air conditioning * Radio * Cooling compartment * Rotating beacon * Rear three-point hitch * Manual top link * Dual-line air brake system * Work lights * 5x double-acting spool valves at the rear * Piton fix and K80 trailer hitch * Front loader quick coupler * Front loader Claas FL 120C (year 2022 / lifting capacity 1,825 kg) ... and much more. ----The vehicle is in unrefurbished condition! Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to take your vehicle in part-exchange. Financing / leasing possible with no down payment! Ppodpfxswxrzkj Agpsl Do you have any questions? We would be pleased to advise you!

Condition: used, Year of construction: 2019, operating hours: 4,764 h, fuel type: diesel, Equipment: cabin, head guard, * Claas Scorpion 746 telehandler * Reversing camera * Air conditioning * Front-wheel steering Ppedewta Dvepfx Agpel * All-wheel steering * Crab steering -----Internal vehicle number: 11072----Errors and interim sale excepted WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp WhatsApp

Condition: new, Year of construction: 2023, Claas Volto 700 New machine, year of manufacture 2023 - Tedder for 3-point linkage, Cat. II - Working width: 6.70 m - Drive: 540 rpm Ppedpfx Aox Tbpmsgpjl - 6 rotors with 6 tine arms each - Rotor diameter: 1.50 m - Rotor gearbox hermetically sealed and permanently lubricated - Double coil tines Ø 9.5 mm with 5 coils each - Tines of equal length and Super C tine quality - Tine angle adjustable to -7°/0°/+7° - Integrated tine loss safety system - Protective bar holders made of glass fiber reinforced plastic (GFRP) - Warning panels with lighting - Rotor tires: 6 x 16x6.50-8 - Transport width: 2.97 m - Weight: approx. 890 kg - Hydraulic requirements: 1 x single-acting | Internal no.: 11113088

Condition: new, Year of construction: 2024, operating hours: 414 h, Claas Scorpion 756 Used demo machine Currently approx. 150 operating hours Equipment: CLAAS tool carrier, hydraulic, incl. lifting bolts Swivel angle 150° / 152° Emergency lowering for telescopic arm Front socket, 4-pin Rear socket, 7-pin Automatic height-adjustable towing hitch 3rd & 4th auxiliary hydraulic circuit front (double acting) incl. continuous flow function Pressure relief front, from cab and externally at telescopic arm 3rd auxiliary hydraulic circuit front (double acting) incl. continuous flow function Top frame cover Boom wiper, front 40 km/h VARIPOWER PLUS 500/70 R24 Michelin Bibload tyres Deutz engine, 4.1 litres, 115 kW, Stage V Pre-separator for vacuum Reversible cooling fan with automatic function Diesel particulate filter Combination display instrument, multicolour display 3.5" Interior rear view mirror Air conditioning Windscreen and roof window wipers Steering column, tilt and height adjustable in two stages Driver's seat, fabric cover, low frequency, with seat heating Radio with Bluetooth, hands-free system with external microphone Ppodjwfivxjpfx Agpjl LED work lights on telescopic arm, front, 2 units Sunblinds for roof and windscreen LED work lights, 3 front & 3 rear Vibration damping Automatic bucket return Central lubrication points, 3 locations (front, rear, telescopic arm) Central lubrication system, prepared Creeper speed drive and hand throttle with DYNAMIC POWER Bucket cylinder shaking function EC certificate of conformity Overload warning system | Internal no.: 11180852

Condition: used, Year of construction: 2025, operating hours: 152 h, working width: 15,000 mm, Claas Liner 4900 Business Pro used demo machine Year of manufacture: 2025, approx. 900 hectares windrowed Equipment: Tyres 710/45 R22.5, 8-bolt Air brake system Automatic brake force regulator Ppodpfx Aswu Irwegpol Rotor wheels 16x9.5-8 Upgrade to 6-wheel rotor chassis (tyres 16x9.5-8) ISOBUS cable, without terminal Section Control Ready Rotor height adjustment, hydraulic Swath curtain | Internal no.: 11264527

Condition: used, Year of construction: 2022, operating hours: 919 h, Claas Lexion 6800 TT Year of manufacture: 2022 Engine hours: 918 Drum hours: 635 Hectares: 2,474 Current equipment: - LASER PILOT steering system, left - Header drive M, constant - Header feed roller with 2-way system, M - HP channel – AUTO CONTOUR, chain, open return pulley - Automatic hitch - Dust extraction for E/V/HP channel - Hydraulic top link for HP channel - Header brake - APS threshing system – grain/maize (10/18/18) - Threshing drum drive – 330-930 rpm - Threshing concave segment - Center guide for straw walkers, mounted - JET STREAM cleaning, incl. 3D and grass wind reduction - Returns volume measurement with CEBIS display - Upper and lower sieves, TM6 - Grain tank 12,500 liters - Grain tank preparation with unloading aid for grass - Grain tank discharge auger L, Ø 330 mm - Grain tank unloading rate 110 l/s - Grain tank unloading drive 80 l/s – 130 l/s - Fixed spout – grain tank discharge auger L, Ø 330 mm - Radial spreader – SPECIAL CUT - Swath former – radial spreader - Straw chopper drive for radial spreader – premium - Drive axle XL – TERRA TRAC - Support wheels for track system - Recovery lugs for TERRA TRAC front axle - TERRA TRAC track width 635 mm - Access ladder with anti-collision protection – TERRA TRAC - Steering axle M, adjustable - Steering axle tires 500/85 R24 x 275 IMP, 8-hole - Travel speed 30 km/h - Without railings - Mercedes-Benz OM470 LA – 340 kW/462 HP (Stage V), air-cooling - Fuel tank 950 liters - Engine PTO pump - A/C-MATIC – automatic climate control with heater - Radio with MP3 function - Roller blinds for side windows - CEBIS terminal with armrest, standard - Camera system, pre-installed - Camera – rear, display in terminal - Camera – hitch, display in terminal - LAAS Remote Service incl. five-year license - TELEMATICS advanced license – 1 year - Comfort seat, air-suspended - LED work lighting – Plus - Large toolbox incl. instructor’s seat - CEMOS AUTOMATIC – AUTO SLOPE - CMOTION multi-function lever - Automatic module Pjdoxq Sfkjpfx Agpjpl - Add-on module 1 - Add-on module 2 - Slope sensor - Steering angle sensor - CLAAS communication module (LTE) - Central locking system, standard - LED tail lights, extendable - CAN Ethernet Gateway (CEG) - FIELD SCANNER/LASER PILOT/AUTO PILOT ready - Automatic discharge direction adjustment - Straw chopper – counterblade/grate adjustment, hydraulic - Rear-view mirrors, electrically adjustable - Automatic chain lubrication for grain tank unloading Incl. Vario 930 header Incl. transport trailer | Internal no.: 11064749

Condition: used, mileage: 5,200 km, power: 90 kW (122.37 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 8,500 kg, empty load weight: 5 kg, maximum load weight: 2,900 kg, lifting height: 6,150,000 mm, number of seats: 1, first registration: 01/2016, operating hours: 5,200 h, total height: 46,800 mm, driver cabin: other, wheelbase: 2,850 mm, Boom 6 m, tires new and as good as new, various hydraulic connections renewed, lifting capacity 3,500 kg, with pallet fork and shovel, engine power 90 KW, 3,621 m³, wheelbase 2,850 mm, lifting capacity with max. boom 1.35 to, fully functional, max. load . 8,500 kg Note Despite careful checking of all our prices, it is not uncommon for errors to creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! - . Ppsdpfx Agovikp Njpol

Condition: used, Year of construction: 2025, operating hours: 86 h, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Podpowvwtajfx Agpspl Chamber: - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Condition: used, Year of construction: 2016, Equipment: compressed air brake, Automatic dosing system Fold-down scraper floor 3rd jockey wheel under pick-up / 6905 loads Self-steering axle Drawbar suspension hydraulic Axle suspension / mechanical LoadSensing PickUp 40 knives Cutterbar LED light package / force measuring bolt for L Ppedpetpn Tpefx Agpjl

Condition: used, Year of construction: 2019, OPERATOR control terminal Fixed chamber press with 1.25 mtr. dual circuit / air brake system Tires: 500/50 - 17 pick-up with roller hold-down / input gearbox with 1,000 rpm / Ppjdpotia Dfofx Agpel

Condition: used, Year of construction: 2020, Lifting height 7.0 m Power 136 hp On mast 2 control units / Ppjdpfx Ajtk R Nlegpsl

Condition: new, Year of construction: 2025, working width: 3,000 mm, Mower Bar: Disc | CLAAS Disco 3150 F Exhibition machine, unused Pjdpfx Agjwuhicspspl Year of manufacture: 2025 Technical data and equipment: 3.0 m working width Low-speed concept – speed reduction to 850 rpm MAX CUT cutter bar Quick-change blades Two-dimensional ground adaptation Weight: approx. 685 kg | Internal no.: 11258080

Condition: new, Year of construction: 2025, working width: 15,100 mm, Number of rotors: 14 | Claas Volto 1500 TS Psdpfx Agjwu Irdopspl used demonstration machine year of manufacture: 2025 Technical data and features: working width: 15.10 m drive: 540 rpm 14 rotors, each with 6 tine arms rotor diameter: 1.50 m universal drawbar for top attachment double spring tines, diameter 9.5 mm deflector sheet for border spreading limitation, hydraulically adjustable K80 ball hitch transport chassis with trailing axle tyres: 500/55-20 | Internal no.: 11264420

Condition: used, Year of construction: 2021, operating hours: 8,170 h, Equipment: crop cutter, PickUp-hydr. | Roller press | Claas Rollant 520 RC Year of manufacture 2021 Ppsdpov Aqthsfx Agpol 8200 pressed bales Equipment: Pickup with roller press, pickup width 2.10 m Follower wheels for pickup, oscillating (pivot point Ø 30 mm) ROTO REVERSE ROTO CUT cutting rotor Set of knives Bale ejector, straight Single wide-angle universal joint shaft with cam clutch, 6-part Tires 19.0/45-17 Input gear 540 rpm OPERATOR, operating terminal with display | Internal no.: 11031991

Condition: new, Year of construction: 2025, working width: 6,800 mm, Claas Liner 2600 Trend demonstration unit in use year of manufacture: 2025 Features: 2-point lower linkage hitch Pedswu Ir Dopfx Agpopl Tyres 340/55-16 12PR 6-hole Swath curtain Individual rotor lift Water-filled wheels | Internal No.: 11264604

Condition: used, Year of construction: 2012, operating hours: 8,600 h, power: 121 kW (164.51 HP), next inspection (TÜV): 11/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, CLAAS 550 ARION C-MATIC FRONT LOADER 100 CENTURY EDITION NEW TIRES ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST * ENGINE CONTROL UNIT DEFECTIVE VEHICLE FEATURES * 4-CYLINDER WITH 121 KW * CENTURY EDITION * HEXASHIFT * AIR CONDITIONING * SUSPENDED CABIN * ONBOARD COMPUTER * FRONT HYDRAULICS * SUSPENDED FRONT AXLE * FRONT LINKAGE & REAR LINKAGE * FRONT LOADER QUICKE TYPE: Q66 * CONTROL UNIT: DW 4 * FRONT LOADER WITH 4 CIRCUITS AND SELECTOR SWITCH * AIR BRAKE LINES FOR TRAILER * ADJUSTABLE TRAILER HITCH (UP & DOWN) * ENGINE CONTROL UNIT DEFECTIVE * TIRE SIZE: FRONT: 540/65R28 * REAR: 650/65R28 * NEW TIRES – INVOICE FOR €7,000 AVAILABLE * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 ----EXPORT CUSTOMS CLEARANCE EXW IN 10 MIN. (APPROVED EXPORTER) 5-DAY, 15-DAY, 30-DAY LICENSE PLATES AND 15-DAY AUSTRIAN LICENSE PLATE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) Ppsdpfx Agox Iyu Ropjl VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID For sales to the EU & third countries, a deposit of at least €500.00 / €1,000.00 will be required. Changes, errors and prior sale reserved! You will find more vehicles on our website. Sales are made exclusively in accordance with our terms and conditions – see homepage. Important Notice – Important Information: Despite careful review of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of various platform providers. Therefore, we wish to point out that all information is provided without guarantee and does not represent any legal entitlement. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Net wrap Ppodpfx Aoyalwmegpjl 9000 bales Without cutters

Condition: used, operating hours: 1,061 h, power: 56 kW (76.14 HP), gearing type: mechanical, fuel type: diesel, first registration: 08/2013, color: green, overall weight: 7,500 kg, mileage: 1,061 km, suspension: other, number of seats: 2, Equipment: all wheel drive, cabin, 1st hand, radio, center armrest, HU/AU new, diesel all-wheel first registration 07.08.2013 56 kW 4,400 cm³ 2 seats 1,061 operating hours Cabin front hydraulics headlights front and rear radio 40 km/h reversing gear armrest rotating beacon front loader with parallel guidance, 3. Circuit 1st hand permissible total weight 7,500 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Podpfovic Epex Agpopl

Condition: used, operating hours: 1,061 h, power: 56 kW (76.14 HP), gearing type: mechanical, fuel type: diesel, first registration: 08/2013, color: green, overall weight: 7,500 kg, mileage: 1,061 km, suspension: other, number of seats: 2, Equipment: all wheel drive, cabin, 1st hand, radio, center armrest, HU/AU new, diesel all-wheel first registration 07.08.2013 56 kW 4,400 cm³ 2 seats 1,061 operating hours Cabin front hydraulics headlights front and rear radio 40 km/h reversing gear armrest rotating beacon front loader with parallel guidance, 3. Circuit 1st hand permissible total weight 7,500 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Ppsdpfx Agovic Eiepol