Used Barford Sx 9000 for sale (2,347)

Condition: new, overall weight: 2,500 kg, empty load weight: 490 kg, maximum load weight: 2,500 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/70R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2500 405x178 Go-Getter. Duolnjq Rfk De U D E Iet The standard equipment of the Anssems flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes on the outside and inside, profile channels for mounting accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, accessory box, straps and anti-theft device.

Year of construction: 2003, Condition: excellent (used), Heating boiler used Manufacturer: Viessmann Type: Vitoplex100 SX1 Year of manufacture: 2003 Nominal heat output: 1120kw Boiler water capacity:1531l Operating overpressure: 6 bar Dslnohl Sacj U D E Isut Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: new, Year of construction: 2024, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Dsln U Dod I Az Se E Ieut Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quill Travel 150 mm Quill sleeve Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: used, Year of construction: 2024, Plough body STU 40 Coulter 430 HD System protector SCHERBOLZEN / Deln Usuhnlme D E Iout

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials Djlsvdqdion U D E Ieut This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 20515021, worktable length: 6,000 mm, worktable width: 2,500 mm, Equipment and features: Power supply PRECISION PLASMARC 400 Cutting heads 2, of which the cutting head is manually reversible Lower cutting table dimensions 2,5 x 6 m Dujlnju Rnkwj U D E Iot Equipment: - heat recovery and flue gas suction system included in the shop The machine is in good condition, current and can be inspected when running. The machine is located in Varkaus.

Condition: new, overall weight: 2,000 kg, empty load weight: 490 kg, maximum load weight: 1,510 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 155R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2000 405x178 Go-Getter. Dusln U Djq Rfkcs E Iet The standard equipment of the Anssems flatbed high loader with brake includes black aluminum side panels, all foldable and removable, black rims, storage box, LED lighting, sturdy eccentric locks, lashing eyes on the outside and inside, profile channels for attaching accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, belts and anti-theft device.

Condition: excellent (used), Steam boiler Viessmann Vitoplex 100LS-440kg/h. Year.2010. 1Bar Duoln U Dji Dfcfs E Ijt Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: new, Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, turning diameter: 360 mm, spindle speed (max.): 2,300 rpm, power: 4 kW (5.44 HP), Lathe DR 180 S x 750 mm Conventional precision lathe in stepless design Center height 180 mm Center width 750 mm Bed width 250 mm Turning Ø over bed 380 mm Turning Ø over cross slide 245 mm Turning Ø over bed offset 500 mm Main spindle bore 40 mm Main spindle mount CAMLOCK D1-5 Spindle speed range 0-2300 rpm Steps in gearbox 3 pieces Main motor power 4 kW Including 24 V LED machine lamp 3-axis digital readout FAGOR 40i TS with constant cutting speed Quick-change steel holder "Multifix" with 5 inserts Duelnjtzkfke U D E Ist 3-jaw chuck AIRLOC Schrepfer machine feet Machine immediately available from stock!

Condition: used, Year of construction: 2023, Hydraulic DA-Automatic XMS 4x plough body STU 40, 1 pair 4x coulter 430 HD, 1 / pair plant protectors, 1 pair 4x skimmer M0 RH65-85 Disc coulter DM 500 to / hydr. stone release heavy pendulum support wheel DM680 / Deletvf Rwjn U D E Ijut

Condition: excellent (used), turning diameter over cross slide: 850 mm, spindle bore: 104 mm, turning diameter: 1,200 mm, Geminis lathe model GE 1200 S with 4000mm between points, has a mechanical part to extend to 5m between points, with new Fagor dimension display, in the movements of the carriage, swing over bed 1250mm, swing over cross slide 870mm, swing over neckline 1600mm, length of the neckline from the nose 430mm, 22 speeds of 2.8-560rpm, diameter of the quill hole 104mm, travel of the cross slide 600mm, travel of the tool carriage 320mm, this lathe also has the possibility of putting the chariot in automatic mode, movement of the carriage with rapids, width of the bed 850mm, has 3 fixed steady rests, has mounted independent jaw plates of diameter 1200mm, has another plate with 4 independent jaws of 600mm ,30hp, estimated weight of the lathe 12,500kg plus accessories, lathe in general in very good condition Duoln Ueuamyts D E Ist

Condition: ready for operation (used), 2x B&R 5PC600 SX02-01 system unit Doln Uot Sy Dks D E Iout

Year of construction: 2016, Condition: good (used), Functionality: unexamined, Machine vintage is 2016 and has the table T3 setup. LVS 3 Light Tower TPSys 4.2 Djlnsu E H Nns U D E Ijut Request for additional information!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank Delohhiw Nsn U D E Ieut with electrically level-controlled condensate drain with Sigma Control 2 control Year of construction: 2022 Operating hours: 1.5 operating hours Technical data: Volume flow at 10 bar: 0.67 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 260 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 1988, Condition: reconditioned (used), Producer ŻEFAM ŻNIN Machine model / type NSXA 32 Year of production 1988 Machine category Planer Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery The customer covers Startup type to be agreed Dueln U Degk Ig Ts E Iet Description Comments GRADERING WIDTH 320 MM WIDTH 4 BLADE SHAFT table length 2200 mm new electrics and new brake on the engine braking 6 sec

Condition: excellent (used), Year of construction: 2003, Cutting capacity Round material 0°-360 mm; 45° left -300 mm; 60° right-300 mm; 45° right-180 mm square 0°-350 mm; 45° left-300 mm; 60° right-300 mm; Deln Ueixqdbe D E Ijut 45° right-180 mm rectangle 0°-420x300 mm; 45°left-300x300 mm; 60°right-300x300 mm; 45°right-180x180 mm saw band dimensions 4640 x 34 x 1,1 mm connected load 3,6 kW weight 1,8 t Space requirement L x W x H 2.8 x 1.8 x 2.1 m

Condition: good (used), Year of construction: 2019, overall weight: 1,620 kg, total length: 31,280 mm, total width: 15,040 mm, total height: 20,900 mm, input voltage: 220 V, type of input current: AC, Sorting using color and image, Easy setup for different types of materials. With a capacity of up to 2 metric tons per hour, it is the ideal high throughput sorting solution for separating zinc gray metals, copper, brass and circuit boards. The extremely flexible, multi-sensor sorting unit can be programmed to create fractions for wires, seeds and non-metallic materials such as plastics. It offers a high return on investment for mixed waste, electronic scrap and metal recycling. You can see it in operation. Dueln U D Eeq Ulw Ro Iot

Condition: excellent (used), Year of construction: 2006, Viessmann Vitoplex 100 Version: SX1 Output: 1750Kw Dslein Dnlsn U D E Ijut Year 2006 Burner: Weishaupt oil or gas burner on request Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Year of construction: 2018, Condition: excellent (used), Laserscanner Surphaser 400HSX • 3D hemispherical scanner with sub-millimeter accuracy and practical work range up to 250 m Dujljlxzk Den U D E Ist • Weighs in at 5.8 kg (12 lb) with battery, compact and easily portable • Class 1 laser , wavelength 1550 nm • Built-in scan controller and battery • Two fully integrated 5 megapixel cameras; software for automatic color data mapping is included • WiFi connectivity • Designed to operate in industrial and outdoors environments, can be operated in direct sunlight • Automatic target extraction and target-based scan registration • Rapid Preview Scan and on-screen areas of interest selection for high density scans • Software allows export of clean and accurate data sets into PolyWorks®, Geomagic®, Cyclone®,RealWorks® and other applications for processing • Extensive set of filters to isolate areas of interest and eliminate unreliable data

Condition: like new (used), Year of construction: 2016, Functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm Duslnjvi Eyps U D E Iot

Condition: used, Year of construction: 2010, We will sell a STORK 900 injection molding machine, injection molding machine parameters below: Dslnjpmr H Ij U D E Isut Year of production: 2010 Installed power: 132KW Maximum injection speed: 400mm/s Maximum injection pressure: 1650bar Screw diameter: 98mm Maximum injection weight for PP: 3180g Closing force: 9000KN Clearance between columns: 1010x1010mm Minimum form height: 300mm Maximum table opening: 1190mm Maximum height of ejector pin: 700mm Diameter of centering pins: 250mm Maximum ejector stroke: 300mm Dimensions of mold mounting plates: 1570x1560mm Unit volume: 5857g Mouthpiece opening diameter: 8mm The machine is equipped with a Sytrama robot. The injection molding machine in good condition is still used in current production, it is possible to see it on site or send a video with an example of operation.

Condition: good (used), Functionality: fully functional, ESAB autogenous cutter with extraction device for sale. Deln U D Eeu Ul Rte Ieut

Condition: good (used), Good working condition. Please check out our other listings as well. Djln U D Ejn Uwicj Ieut

Condition: excellent (used), Functionality: fully functional, mileage: 569,500 km, power: 353 kW (479.95 HP), first registration: 03/2018, fuel type: diesel, color: red, axle configuration: 4x2, fuel: diesel, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, onboard computer, parking heater, sleeping cabin, spoiler, Iveco Stralis XP 480 ADR -Registered 03/2018 -Relayer : Intarder -Km 569,500 -ADR -Cool at standstill -Tyres at 40% AT OTHER LOCATIONS IN OUR GROUP WE ARE OFFICIAL MERCEDES-BENZ DEALERS D.E. TRUCK S.P.A. HEAD OFFICE NAPLES (NA) DOMENICO ESPOSITO S.P.A. HEAD OFFICE EBOLI (SA) OFFICIAL DEALER Doln U D Eeup H T Te Ieut FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS DOMENICO ESPOSITO S.P.A. HEAD OFFICE EBOLI (SA),NAPLES (NA) - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING AT THE HEADQUARTERS. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0% DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30 A.M.-7 P.M. SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTIMARKS COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-semi-trailer refrigerated tank- Lamberet-schmitz ISUZU-CASSONEFISSO-GRU-TRILTABLE-TELONATO-BOX-SPONDACARICATRIC E-CELLA FRIGO- COIBENTED WITH FRIDGE -FURBANK

Year of construction: 2001, Condition: used, Price: On request ABUS overhead crane 2 x 9000kg Year of construction: 2001  Lifting capacity: 9000kg Dimensions: 13380mm x 2370mm Motor: 440-480V, 0.90/1.90A, 50 hz 2 pieces available, price per piece - Year: 2001 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Duslswh Nh Tsn U D E Ist