Used Rotair Mdvs 185 P8 for sale (2,873)

Condition: used, mileage: 224,076 km, Year of construction: 2005, Serial number: ZCFA75C020247xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18554 Specifications: - 2005 model - 224.076km - 170 BHP - Euro 4 - Manual transmission - Rep. object - Permissible total weight: 7490 kg -Plan -Climate -Light - Ready for delivery Description: Iveco is sold as a Rep. Object as there is a lot to do with it  It starts and goes, says the owner. Some extra cost must be included here. Ready for delivery Km: 224076 Debovgxzze E Aubiout HK: 170 Technical approved: no EU-approved until: 28.02.2021 Own weight: 4146 Total Weight: 7490 Payload: 3269 Width: 252 Length: 715 Kw: 125 Euro: 4

Condition: used, Year of construction: 2007, thread capacity M 16 threading depth 80 mm throat 250 mm table-size 400 x 500 mm spindle turning speed range 280 + 1800 U/min quill stroke 80 mm thread capacity min. M 4 mm dayligth 315 mm spindle taper B 18 thread capacity in Alu: M 22 total power requirement 2,2 kW weight of the machine ca. ca. 220 kg dimensions of the machine ca. 1,5 x 0,9 x 2,25 m Automatic thread cutting machine in table design, tapping with hand feed - semi- automatic - and fully automatic operation (single and continuous stroke), threading with conductive cartridge, tap breakage protection, brake motor, faster return, extended column adjustable (largest distance from table surface to lower edge of quill 780 mm), intervention protection secured by a magnetic switch. The appropriate pulleys must beavailable for the individual speeds (possible from 280 to 1800 rpm in 9 levels). This machine is equipped with 2 pulleys for the speeds 280 + 1800 rpm. Deb Eovrrahj Aubiout Other belt slides, clamping inserts for drill chucks and conductive cartridgesare available from the manufacturer. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM Technologie, year 2007, 24 V. Prepared for weight compensation for multi-spindle drilling heads with flange quills. Machine comes from a workshop for the disabled and was only rarely used for one product. Please notice that the price of this machine new is € 18500,--! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2022, Field of application: Construction Drive: Wheel Dujb E Auetr I Uksbijt Empty weight: 749 kg Make of engine: Kubota Serial number: APP866746 Transport dimensions (LxWxH): 2.29x1.35x1.55 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Used STEPHAN stainless steel cutter. - Type UMM/SK40E PILOTE - No. 4418598-Stainless steel tilting vessel double jacket - Motor : Hp 10 - Rpm 1500/3000 - 380 volts Dsbsrdg Tao E Aubiout - Electric control panel - scraper with motor

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Dujbsu R S Hpo E Aubijt Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine -

Condition: excellent (used), Year of construction: 2018, 4 used route trolleys Manufactured by Still Type Liftrunner Year 2018 Serial numbers 550516 j 00013,00014,00015,00016 B Frame Load capacity 1 to Tractive force 2000 N Unladen weight 400 kg B-frame triple loadable 1000 x 600 mm 1.2.1 Load dimensions (length x width) mm 1210 x 810 1210 x 1010 / 1010 x 630 1.5 Load capacity 1 Q kg 1000 1 trolley: 1000 2 trolleys: 2 x 500 Weight Duobsuyi Ags E Aubiet 2.1 Tare weight kg 408 Wheels/ Chassis 3.1 Polyurethane tires 3.2 Tire size mm ⌀ 200 3.5 Number of wheels 2 (center axle) 3.6 Track width b10 mm 810 Basic dimensions 4.2.1 Overall height lowered/raised h15 mm 313/353 4.4 Lift h3 mm 40 4.12 Coupling height lowered/lifted h5 mm 185/225 4.14 Drawbar length l0 mm 533 4.16 Cargo bed length/max. length of trolley 2 l3 mm 2030 4.18 Loading area width b9 mm 834 4.19 Overall length l1 mm 2859 4.21 Overall width b1 mm 1070 4.32 Ground clearance Center wheelbase lowered/raised m2 mm 0/40 4.35 Turning radius LTX 50/LTX 70 Wa mm 3350/3450 4.39 Length of frame opening (inside frame dimension) l9 mm 1994 4.40 Length of center plate l10 mm 350 4.41 Height drawbar lowered/raised h11 mm 170/210 Performance data 5.1 Max. Driving speed 3 km/h 15 Otherwise 8.5 Clutch articulated steering system Errors excepted

Condition: used, mileage: 96,000 km, Year of construction: 2020, Field of application: Freight transport Serial number: AHTHB3CD802136039 Please contact ATS Norway AS for more information Please provide reference number upon request: 16172 Specifications. Dusbjvyfuzs E Aubiet - 2020 model - 96000 km - Automatic - 4x4 - High and low gear - Tires - 150 hp - 2 sets of tires summer/winter - Aluminum rims - Trailer hitch - Diesel - Climate/ac - Full service history - Ready for delivery Description. Great Toyota hilux with full service history. Automatic gearbox with high and low gear. Ready for delivery. Km: 96000 HK: 150 Technical approved: Yes EU-approved until: 14.08.2024 Own weight: 2110 Total Weight: 3210 Payload: 1025 Width: 185,5 Length: 533 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: Duobovr Hcwo E Aubiet - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Condition: used, Year of construction: 2022, Field of application: Construction Drive: Wheel Empty weight: 749 kg Make of engine: Kubota Dob Eotr N H Us Aubieut Serial number: APP867098 Transport dimensions (LxWxH): 2.29x1.35x1.55 Please contact Pfeifer Rentals & Sales B.V. for more information

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 2890 Measurements depth 2460 Measurements height 2185 Machine weight 1300 Main Drive Duob E Auswiah Tsbijt Main motor power Total drive 5.0 kW, Saw motor 3.0 kW Additional Equipment Hydraulic material clamping Coolant system with 2 coolant nozzles Saw blade cleaning with easily replaceable plastic brush This Metal Band Saw was manufactured in 2009. It features a robust design with dimensions ranging up to 2460mm in length and 2185mm in height, and a total weight of approximately 1300 kg. The saw motor is powered by 3.0 kW, supporting a cutting speed from 20 to 110 m/min. It includes hydraulic material clamping and a coolant system with a 65-liter capacity. Ideal for handling material weights up to 400 kg/m. For more information about this Metal Band Saw, please reach out to us. Application Types Sawing

Condition: ready for operation (used), Brand: Bacci Model: Brevettata The outer spindles are adjustable in degrees and in height Work table size: 700x200 mm Maximum working height: 165 mm Power: 380V, 50 Hz, 3-phase Size for transport: Length: 185 cm Width: 120 cm Height: 165 cm Weight: 950 kg Stock no: 103618BXA Dueb E Aoh S Irvsubiot

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr230983, CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Dob Eewiifbs Aubiout Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2019, operating hours: 7,900 h, Field of application: Construction Serial number: 81180xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18539 Specifications: - 2019 model. - Hours: approx. 7900. - Weight: 47,040 kg. - 3 deck sight and return. - crushing unit: Sandvik CH430. - Webasto with app control. - Raised undercarriage. - Extension of return link with original kit from dealer. - Central grease - Remote control Duob Esvgy Sbo Aubist - Service history - New main axle and shock cone Description: Keestrack H4e Concrusher with 7900 hours. Overhaul of crusher after 7450 hours. This job is well documented and the distributor of the crusher has supported the delivery and procurement of parts. Ready for delivery. Hours: 7900 Total Weight: 47040

Condition: used, Year of construction: 2024, operating hours: 73 h, load capacity: 10,000 kg, lifting height: 4,535 mm, free lift: 1,530 mm, load center: 120 mm, mast type: triplex, power: 168 kW (228.42 HP), fork carriage width: 2,550 mm, ground clearance: 235 mm, front tire type: Hauler LT, front tire size: 12.00-20, rear tire type: Hauler LT, rear tire size: 12.00-20, total length: 7,400 mm, wheelbase: 2,980 mm, engine type: Cummins B6.7, drive type: Diesel, construction width: 2,560 mm, net weight: 21,820 kg, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad Duob E Aoviyc Soubijt · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: used, Year of construction: 2022, Field of application: Construction Drive: Wheel Empty weight: 749 kg Make of engine: Kubota Serial number: APP867060 Transport dimensions (LxWxH): 2.29x1.35x1.55 Please contact Pfeifer Rentals & Sales B.V. for more information Deb E Austr N Hijbiout

Condition: good (used), Year of construction: 2007, Industrial Robot Manufacturer: Kuka Type: KR16 C Ceiling Year of Manufacture: 2007 Dueb Eetpf Ito Aubijt Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka Controller KRC2ed05 Weight: 185 kg Processor: 2 GHz Language: WinXP Software Version: V5.6.11 Kuka Teach Pendant KCP2ed05 Kuka Connecting Cables: 7 m/15 m ä080525

Condition: used, Year of construction: 2016, Serial number: W09SAR348GLH0xxxx Please contact ATS Norway AS for more information Dujbovgy Uvs E Aubiet Please provide reference number upon request: 18579 Specifications: Model year: 2016 Air suspension Tires (see pictures) 17 t/m Palfinger Epsilon crane (2016 model) The crane is delivered certified Lift on 1st and 3rd axles Turn on all axles Length: 1,390 cm Width: 255 cm Wheelbase: 200/200 cm Net weight: 14,400 kg Extension Outriggers Description: Huttner timber trailer equipped with 17 t/m Epsilon timber crane from 2016. Both trailer and crane are delivered approved and certified. The trailer has lift on the 1st and 3rd axles. Can be delivered at short notice. Technical approved: no EU-approved until: 12.03.2025 Own weight: 14400 Total Weight: 48000 Payload: 33600 Width: 255 Length: 1390

Condition: used, Year of construction: 2023, operating hours: 95 h, load capacity: 12,000 kg, lifting height: 5,550 mm, free lift: 1,900 mm, load center: 600 mm, mast type: triplex, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, ground clearance: 210 mm, front tire type: Hauler LT, front tire size: 12.00-20, rear tire type: Hauler LT, rear tire size: 12.00-20, total length: 7,200 mm, wheelbase: 3,000 mm, engine type: Cummins B6,7, drive type: Diesel, construction width: 2,560 mm, net weight: 21,540 kg, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder Dusb E Asvix Iajubiet · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: used, Year of construction: 2022, Field of application: Construction Empty weight: 749 kg Make of engine: Kubota Serial number: APP866721 Transport dimensions (LxWxH): 2.29x1.35x1.55 Duob E Aubstr N Ndeiot Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: good (used), Year of construction: 2011, Industrial Robot Manufacturer: Kuka Type: KR6-2 Year of Manufacture: 2011 Reach: 1611 mm Dujb Eotqvg Ej Aubiet Weight: 235 kg Payload: 6 kg Kuka Controller KRC2ed05 Weight: 185 kg Processor: 2 GHz Language: WinXP Software Version: V5.6.11 Kuka Teach Pendant KCP2ed05 Kuka Connecting Cables ä080525

Condition: good (used), Year of construction: 2006, Industrial Robot Manufacturer: Kuka Type: KR6 Year of Manufacture: 2006 Reach: 1611 mm Weight: 235 kg Payload: 6 kg Kuka Controller KRC2ed05 Weight: 185 kg Processor: 2 GHz Language: WinXP Software Version: V5.6.11 Duob E Aubstrn Hveiet Kuka Teach Pendant KCP2ed05 Kuka Connecting Cables ä080525

Condition: good (used), Year of construction: 2007, Industrial Robot Djbetrn I Nj E Aubiout Manufacturer: Kuka Type: KR16 Year of Manufacture: 2007 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka Controller KRC2ed05 Weight: 185 kg Processor: 2 GHz Language: WinXP Software Version: V5.6.11 Kuka Teach Pendant KCP2ed05 Kuka Connecting Cables ä080525

Condition: good (used), Year of construction: 2008, Industrial Robot Manufacturer: Kuka Dobsunk Ixe E Aubieut Type: KR60-3 Year of Manufacture: 2008 Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka Controller KRC2ed05 Weight: 185 kg Processor: 2 GHz Language: WinXP Software Version: V5.6.11 Kuka Teach Pendant KCP2ed05 Kuka Connecting Cables 7 m/15 m ä080525 1 piece

Condition: good (used), Year of construction: 2001, Kuka Robot KR30L15-2 EX (old design) Year of manufacture 2001 Reach 3085mm Weight 930kg Payload 15kg Kuka Controller VKRC2 Weight 185kg Processor 733MHz Djb E Aueg U Am Ejbisut Language Win95 Software version V4.1.7 Kuka Teach Pendant KCP2 Kuka Connecting Cables 7m/15m 080525ä

Condition: good (used), Year of construction: 2007, Industrial Robot Kuka KUKA KR200-2 Comp KRC2ed05 Year of manufacture 2007 Reach 2400 mm Weight 1267 kg Payload 200 kg Controller KRC2ed05 Weight 185 kg Processor 2 GHz Dujb Eedv Dx Do Aubiet Language WinXP Software version V5.6.6 Teach Pendant Kuka KCP2ed05 Connecting cables 7 m/15 m Several in stock, orange! ä080525