Used Floorpul Ruby 50E Ii for sale (3,609)

Condition: used, Year of construction: 2011, lifting height: 9,900 mm, empty load weight: 2,300 kg, fuel type: electric, tire condition: 70 %, drive condition: 75 %, maximum load weight: 454 kg, Self-propelled scissor lift SKYJACK SJ III 4632 11.7 m working core. 317kg thr personal lift SKYJACK SJ III 4632 scissor lift for sale in excellent condition Celeugtlion Siupegt personal lift, work stand with extendable platform. Manufacturer: Skyjack year of manufacture: 2011 load capacity: 454 kg Working height: 11.7 m Raised platform height: 9.7m Total width: 1.9 m Total length: 2.3 m Gross weight: 2300 kg non-marking tires operating hours: 374 TROJAN MOTIVE batteries in good condition. built-in battery charger

Condition: ready for operation (used), Georgii Kobold KSY 464.20-2 R6 brushless servo motor, serial number as per photo, hole spacing of the mounting holes: 81 x 81 mm, Ø drive shaft: 19 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Coln Siei D H Uhjupegt

Condition: excellent (used), Iijima EFC-1600 die-cutting machine with break-out section and leading edge edging device for package delivery onto conveyor belt. Cgsln Siujv Nzpgepet

Condition: excellent (used), Year of construction: 2004, MAZAK INTEGREX 200-III ST 5 Axis Turning Centers Lathe, s/n 174623, w/ MAZATROL 640MT Pro Control, 40” Center Distance, 2.5” Bar Capacity, 26” Swing, 26” Turning Diameter, Travels: X-22.83”, Y-6.3”, Z-41.14”, B Axis Head Tilt: 225°, C Axis Index: 0.001°, 5,000 RPM Spindle Speed (Main/Sub), Live Tooling, 12,000 RPM Live Tooling Spindle Speed, 40-ATC, KM63 Taper, Sub Spindle, Oil Matic Oil Temp Regulator, Chip Conveyor Cjlnsu A Dgle Siupegt

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, Functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Motorized height adjustment has been repaired Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Coln Siov Hcbleupsgt Transverse movement 220 mm Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel.

Condition: used, Year of construction: 2017, For people up to max. 130 kg Lifting height driver's cab: 3350 mm Working height: 5350 mm Cgjln Sijvpvvhjupjt Dead weight: 660 kg Operating hours: 71 h Integrated charger

Year of construction: 2007, Condition: used, machine/vehicle number: 46650051, Horizontal machining centre Cjlnogay Evj Siupsgt with multipallet+B39 NIIGATA SPN 501-P8 FANUC 18I-MB Accessories: Chip conveyor High pressure cooling system through the spindle the spindle line

Condition: ready for operation (used), Georgii Kobold KOD 7410-A FO / WK Motor SN:545752 + GF85 Gearbox, SN:521116 Fan - without connection, used, normal signs of use, 100% functional, scope of delivery as per photos Cgoln Sougyzdjiupet

Condition: repair required (used), Functionality: not functional, Manufacturer: Miic The machine does not work. Program error! Cgoln Sieq U N N Rjupot Voltage: 110 V !!!

Condition: used, Three-phase motor, electric motor Cgeln Sijdzzh Roupjt -Power: 1.8 kW -Speed: 1700 rpm -Shaft: Ø 18 x 40 mm -Construction: B3 -Dimensions: 290/270/H190 mm -Weight: 14.2 kg

Condition: good (used), Year of construction: 1997, operating hours: 9,350 h, Functionality: fully functional, travel distance X-axis: 1,530 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 1,140 mm, controller manufacturer: Fanuc 15M, workpiece weight (max.): 2,000 kg, total height: 3,930 mm, total length: 7,760 mm, total width: 4,470 mm, rotary table diameter: 800 mm, overall weight: 22,000 kg, spindle speed (max.): 5,000 rpm, operating hours of spindle: 9,350 h, spindle nose: MAS 403 BT50, number of spindles: 1, number of slots in tool magazine: 90, Equipment: chip conveyor, documentation/manual, Niigata HN 80 C Fanuc 15M 5-Axis horizontal machining centre whit low hours and EXSTENDED AXIS X Y Z Fanuc 15M control travel distance X-axis: 1530mm travel distance Y-axis: 1220mm travel distance Z-axis: 1140mm Pallet width: 800X800mm / 3 palettes Max load 2000kg spindle speed (max.): 5000 rpm Spindle nose MAS 403 BT50 90 pcs of tools in tool magazine True spindle coolant Oil mist lubrication of spindle bearings Spindle oil cooler Turn table around Y-Axis diameter 800mm Hydraulic spindle box lightening Automatic power off RS-422 Port Electric pulse handwheel Renisaw MP-7 Probe Coln Sist Rgz Teupsgt Post processor for Cam for the software "Autodesk Fusion 360"

Condition: good (used), Year of construction: 2004, MEDESA III / 320  Age: 2004  Punching machine for the production of aluminum yoghurt lids.  Working width 320mm Cslnjtvatdj Siupogt We actually sell 2 Medesa III / 320 punching machines with a working width of 320 mm. Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly)

Condition: used, bore capacity in steel (diameter):5 mm Cgsln Sscxxmlsiupjt throat:100 mm bore stroke:30 mm voltage:220/380 V turning speeds:2820 U/min clamping table:170 x 120 mm workpiece height max.:120 mm total power requirement:200 W weight of the machine ca.:35 kg dimensions of the machine ca.:0,25 x 0,43 x 0,5 m

Condition: ready for operation (used), Georgii Kobold KSV 6/20 E1-M3-K4/Z1/P2/G1 AC Servocontroller MidiDrive , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Cgolji D U Smsn Siupot

Condition: ready for operation (used), Georgii Kobold KSV 6/20 E1-M3-K4/Z1/P2/G1 AC Servocontroller MidiDrive , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Cgolnsi D U Sqe Siupst

Condition: excellent (used), Year of construction: 2005, operating hours: 5,607 h, Functionality: fully functional, machine/vehicle number: 181174, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Z-axis: 1,045 mm, swivel angle B-axis (max.): 225 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Machine type: 5-axis simultaneous & 5-axis freeform – CAP Tool System Year of manufacture: 10/2005 Max. swing diameter: Ø660 mm Max. machining diameter (upper/lower turret): Ø660 mm / Ø270 mm Max. machining length: 1016 mm X-axis travel (upper turret): 580 mm X2-axis travel (lower turret): 150 mm Z-axis travel (upper turret): 1045 mm Z2-axis travel (lower turret): 990 mm B-axis travel: 225° C-axis travel: 360° Chuck size: 8" Main spindle speed: 5000 rpm Main spindle bore: Ø51 mm Min. main spindle indexing: 0.0001° Chuck size 2nd spindle: 8" Speed of 2nd spindle: 5000 rpm Travel of 2nd headstock (W-axis): 1050 mm Rapid traverse speed of 2nd headstock (W-axis): 30,000 mm/min Min. indexing of 2nd spindle: 0.001° Turret type (upper): With ATC Tool shank height (upper): 25 mm Boring bar shank diameter (upper): Ø40 mm Turret type (lower): Drum turret with 9 stations Number of tools (lower): 9 tools Tool shank height (lower): 25 mm Boring bar shank diameter (lower): Ø32 mm Turret indexing time (lower): 0.14 s per switching operation Milling spindle speed: 12,000 rpm Milling spindle machining capacity: milling Ø100 mm, end milling Ø32 mm, drilling Ø30 mm, tapping M27 Rapid traverse speed X-axis (upper turret): 38,000 mm/min Rapid traverse speed X2-axis (lower turret): 38,000 mm/min Rapid traverse speed Y-axis: 26,000 mm/min Rapid traverse speed Z-axis (upper turret): 38,000 mm/min Rapid traverse speed Z2-axis (lower turret): 38,000 mm/min Rapid traverse speed C-axis: 400°/min Jog feed speed X-axis (upper turret): 2,000 mm/min Jog feed speed X2-axis (lower turret): 2,000 mm/min Y-axis jog feed rate: 2,000 mm/min Z-axis jog feed rate (upper turret): 2,000 mm/min Z2-axis jog feed rate (lower turret): 2,000 mm/min C-axis jog feed rate: 2,000°/min Tool shank / tool holder capacity: CAPTO C6 – 20 tools Max. tool diameter: Ø90 mm (Ø125 mm with free adjacent positions) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.3 s Main spindle motor (30 min / continuous operation): AC 22 kW / AC 15 kW 2nd spindle motor (30 min / continuous operation): AC 18.5 kW / AC 15 kW Milling spindle motor (20% ED): AC 15 kW Coolant pump motor: 1.2 kW Power consumption (continuous operation): 66.0 kVA Compressed air connection: 5 bar, 500 l/min Coolant tank capacity: 300 l MACHINE DETAILS Machine height: 2,597 mm Operating times: - Total time switched on: 2026:04'40" - Automatic operating time: 1323:07'43" - Automatic cutting time: 669:16'50" - Total cutting time: 5606:49'54" - Total operating time: 2028:04'40" Cgolewcl Uxon Siupjt EQUIPMENT Various machining tools included Test and demonstration on site possible

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Coln Siuowff R Sspogt Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 300565, Tsugami SS327-5AXIII Mfd. Nov. 2020 Fanuc Series 31i-Model B5 IEMCA Boss 338 HD Run less than one shift Cgsln Sovnf Rfoiupjt Cut Steel Standard tooling included

Condition: used, Year of construction: 2021, Opportunity to purchase an outstanding tube laser in excellent condition. 3D Fabri Gear 400 III 4.0 kW Laser 8M LOAD, 8M UNLOAD Cslov Rm A Ien Siupsgt Manufactured in 2021 and only 3260 cutting hours. Full technical specifications with options and additional equipment in the attached document.

Year of construction: 1966, Condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) stroke 60 mm Cgeln Sijir I Slsupst ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Year of construction: 2018, Condition: ready for operation (used), Main Drive Spindle speed range 10000 rpm Number of axis 4 Additional Equipment Compliance with German and European regulations, including: Directive 98/37/EC (Machinery Directive) / Low Voltage Directive 73/23/EEC / Equipment and Product Safety Act (GPSG) /Prevention Principles (BGV A1) CE marking and written confirmation of compliance provided This 4-axis Willi Göbel GRS-III-2400-SP cylindrical grinding machine was manufactured in 2018. It offers precision and efficiency for your grinding needs. If you are looking to get high-quality grinding capabilities, consider the Willi Göbel GRS-III-2400-SP machine we have for sale. Contact us for more information. Application Types Grinding Celn Siewhgr Ajupegt

Condition: ready for operation (used), Siemens 6FX1190-3AA00 SINUMERIK MS250 E Stand 00 SN:250272, used, normal signs of use, 100% functional, scope of delivery as per photos Cgoln Siuji Ed Tuspst

Condition: new, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand Celn Sijvzt D Teupegt - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: good (used), Year of construction: 2018, fuel type: hybrid, color: red, General information Celn Sijwgc Sceupogt Field of application: Construction Weights Empty weight: 4.365 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.600 cm Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1400 m Transport dimensions (LxWxH): 4x0,99x2 Production country: IT Additional information Please contact Vink Machinery for more information Hinowa Lightlift 26.14 IIIS * 2018 * Diesel and 230 volt * 26 meter working height * 14 meter horizontal reach * Adjustable tracks * Remote control * Variable outriggers * Outrigger machine * ​​4365 kg net weight

Condition: ready for operation (used), Siemens 6AV7894-0BH32-0AC0 Simatik HMI IPC677C (Panel PC) 19" Touch Industrial PS ,SN:VPC0851816 , serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Colji Edhion Siupjgt