Used Valtra/Valmet 8950 Hi-Tech for sale (143,752)

Year of construction: 2001, Condition: like new (used), Parts shown by hand not come. Fpsbu Uveg Rgtuoz Usg

Condition: new, Year of construction: 2025, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Fsbu Uvsffh Atjz Uepg Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: used, machine/vehicle number: 248, Spotting and test press, including magnet Fpobswdmwdou Uvz Ujg adjustable depth stop.

Condition: excellent (used), Year of construction: 2013, 2013 Highcon Euclid (Direct to Pack) Digital Cutting and Creasing Machine Atlas Copco GA45 Compressor with Elektronicon Control. Lauda UC-0650 2 Spix Highcon PWP SR TS °C Chiller. Maximum Speed 1,500 Sheets/Hour. Maximum Sheet Size 760 x 1,060 mm (30 x 42 inches). Maximum Stock Weight 550 gsm. Maximum Media Thickness 0.6 mm (24 pt.). Supported Substrates Label and Paperboard Thicknesses From 0.2 mm to 0.6 mm and N & F Microflute Up To 1.2 mm (47 pt.). Utilises Highcon's Patented Digital Adhesive Rule Technology (DART) For Creating Digital Crease Lines and High-speed Laser Cutting. S/No.TL 50053. Fpobu Uvov U A Syez Usg Integrated Extraction LTG VSRMM250/8 RD360. Machine Dimensions (W)8,600 x (D)2,100 x (H)2,300mm. Machine Weight 6.5 Tonnes. Oil-Injected Rotary Screw Air Compressor. 125L/Sec. 45kW. 3,000RPM. Weight 1 Tonne. (W)1,680 x (D)850 x (H)1,550mm. Lauda Chiller Temperature Range -5°C - 25°C. Pressure Nominal 3.7Bar, Maximum 4.7Bar. Pump Flow Nominal 196L/Min, Maximum 420L/Min. 60dBA. Water Reservoir Volume 300L. (W)1,000 x (D)1,565 x (H)1,965mm. Donaldson Torit DCE ART 501/N4 RD0 Extraction Facility. 965m³/h. Filter 10 m² Cartridge Type. 75 dB(A). 1.5kW. (W)3,900 x (D)1,700 x (H)5,000. Chimney (H)5,500mm. See Additional Documentation Attached.

Condition: excellent (used), Functionality: unexamined, overall weight: 2,500 kg, fuel type: diesel, color: green, maximum load weight: 3,000 kg, Year of construction: 1989, operating hours: 11 h, Equipment: hydraulics, Brand: Hiab Model: 965/90 Year of manufacture: 1989 Serial number: 95196 Operating hours (read): 11 Engine: Hatz Fuel: Diesel Voltage: 12 Dimensions (L x W x H) (mm): 3400 x 1000 x 2700 Weight (kg): approx. 2500 Number of units in stock: 1 Capacity (kg): 3000 kg x 3000 mm / 2000 kg x 4600 mm / 1400 kg x 8400 mm Made in the Netherlands Comments: Low hours self-propelled hydraulic crane Fpebu Uvzev Rvvkj Ujg

Condition: good (used), Year of construction: 2003, Functionality: fully functional, cooling capacity: 446 kW (606.39 HP), type of cooling: air, overall weight: 7,246 kg, total width: 2,400 mm, total length: 5,800 mm, total height: 2,500 mm, warranty duration: 6 months, Aircooled chiller YORK YCAS0475EB 446 kW Cooling capacity: 446 kW / 126.82 tons (12/7 — 35°C) Year of manufacture: 2003 Refrigerant circuit: 2 pcs. Febewd Sfyou Uvz Uepg Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. YORK DXS36LASA46/50 (screw) + 1 pcs. YORK DXS24LASB46/50 (screw) Type of refrigerant: R407c Number of fans: 8 pcs. Weight: 7246 kg. Dimensions: 5.8x2.4x2.5 m. Condition: Good

Year of construction: 2005, Condition: good (used), All parts shown by hand not come. Fjbuod N I Eze Uvz Uspg VAT not included in price.

Condition: used, Year of construction: 2007, Technical details: Febewdyxhou Uvz Uspg x-travel: 700 mm y-travel: 630 mm z-travel: 700 mm weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,90 x 2,90 m pallet size:: 500 x 500 mm tool taper: SK 40 Tool taper: HSK-A 63 turning speed range: 10.000 U/min

Condition: good (used), Automation cell for tooth flank grinding machine, consisting of: Koenig Smart Loader V6 2 x160 KOENIG Automation AG Fjbusi Aphyo Uvz Ujpg Automated parts handling for loading of Reishauer RZ160 tooth flank grinding machine Double - swivel gripper Integrated oil spinning station n.i.O. / SPC station as drawer EKF - Stacking cell 3/2 - 600x400 Workpiece feeding and workpiece storage for 3 trolleys with 12 baskets each, dimensions 400x600 mm, raw / finished parts feeding for Koenig - Automation Automation can continue to work seamlessly during workpiece carrier change in the stacking cell Carriage change possible without interruption of automatic operation, in current configuration 288 workpiece supply per basket stack Control Siemens Siematic S7, operation via Siemens Mobile Panel HT8 Oil drip tray under complete system. Evotech laser marking unit ETL 20F Laser cell for laser marking of the gears before the grinding process Fiber laser 20 W Marking field 110x110 Integrated IPC with marking software and monitor Integrated extraction system With shuttle for workpiece transport to automation cell. Automation cell suitable for Reishauer RZ 160 tooth flank machine. All technical data are subject to typing errors/errors. "Price on request". Sale only in countries of the EU.

Condition: used, TECHNICAL DETAILS - Speed : 100 [rpm] - Programmable work pressure : 0 - 400 [kg] - Lapping wheel diameter : 410 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1200 x 2000 [mm] - Machine height : 2200 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 26630 [h] Fpjbjwdam Sou Uvz Ueg EQUIPMENT - CNC : SIEMENS SIMATIC HMI - Coolant tank * with paper filtering unit - Cooling unit

Condition: new, pipe diameter: 350 mm, High-quality 2 mm suction pipes, 350 mm diameter – welded, robust quality for conveying abrasive materials – 2 m long, flanged Fpebuswcfvcs Uvz Uog Special price as a special item ex works 49176 Hilter = €195.00/2 m piece

Condition: good (used), Year of construction: 2015, Functionality: fully functional, cooling capacity: 33.8 kW (45.96 HP), type of cooling: air, overall weight: 460 kg, total width: 1,000 mm, total length: 1,600 mm, total height: 1,570 mm, warranty duration: 6 months, Aircooled chiller RHOSS TCAEY133 33.8 kW Cooling capacity: 33.8 kW / 9.61 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Panasonic C-SCP510H38B (scroll) Type of refrigerant: R410A Fpjbu Uvzswd R Rne Uog Number of fans: 1 pcs. Dimensions: 1.6x1x1.57 m. Weight: 460 kg. Condition: Good

Condition: good (used), Year of construction: 2000, X 800 mm , Y 800 mm, Z 800 mm 10.000 min-1 Fpjbu Uvovyrh Uez Usg HSK 100 IKZ Parts shown by hand not come.

Condition: like new (used), MACHINE DATA Fpjbu Usd Tm D Esvz Uog TORNI TACCHI FTC model 51 OVERALL DIMENSIONS Center distance 4000 m/m Height 1550 m/m Width 1400 m/m Length 6200 m/m Weight 10.000 Kg Swing over bed 1120 m/m Swing over carriage 810 m/m Swing over gap 1350 m/m Hole through spindle 123 m/m Number of speeds 18 Range of speeds 7-550 / 1’ Horsepower of motor 25HP Morse taper № 6 Metric threads – inch – module – pitch 3 jaw chuck 450 m/m Face plate 850 m/m Extra face plate 1420 m/m Good condition

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, specially designed for demanding machining tasks in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an excellent investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy thanks to linear glass scales (no recalibration required) Innovative ISPG (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark discharge and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM linking for seamless data transfer Fobu Ujv Tcnrevz Uspg Job management with prioritization and Real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-station electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-construction with high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality requirements ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and economical die-sinking EDM! 📌 Our used machine, built in 2015, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability.

Condition: new, For many years the Basic series has been the reliable mechanic's lathes that have been used in countless workshops and training centers. The new PRO version offers improved performance and ergonomics, more standard equipment and also the design has been improved, to meet the demands of todays users. Fpebu Uvzouyhvxo Ujg

Condition: used, Year of construction: 2019, Functionality: fully functional, Complete system for sale 1 chiller and a cooling system. Fpebu Uvzjv Npgme Uog

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D spindle tunring speed 20.000 U/min tool taper HSK 63 A-axis -95 / +95 ° C-Axis 360 ° Fpjbu Uvev H Eraez Uog number of tool places 40 Pos.

Condition: new, The Basic 180 Super is the largest mechanics lathe in the KNUTH Machine Tools catalog and is also one of the heaviest machines in this popular market segment. The large bed width of 206 mm (8 in) and a 30 percent higher total weight have a positive effect on the overall machining quality and enable machining services that also meet industrial requirements. Equipped with position indicator, quick-change holder and other standard accessories, the BASIC 180 Super has been one of our best-selling conventional lathes for more than 20 years. Fpjbouygz Tou Uvz Usg

Year of construction: 2015, Condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Febu Uvzevdt Hge Ujpg Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our opinion, the machine is in good condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2012, pressure 6 bar voltage 24 V weight of the machine ca. 1,75 t length in total 1500 mm length in width 900 mm Febovdubleu Uvz Uopg Total height 2100 mm Riveting machine, riveting machine from Arnold Shinjo Changes and errors in the technical data and information as well as prior sale reserved!

Year of construction: 2012, Condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Fpebsvki Ruou Uvz Ueg Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Fsbu Uvzjvtgw Dj Ujpg Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2006, x-travel 700 mm y-travel 630 mm z-travel 700 mm Control Fanuc 21i-MB max. turning speeds 10.000 min/-1 tool taper BT 40 max. tool weight 10 kg tool length - max. 350 mm tool diameter 80 mm Number of working hours ca. 23.413 h spindle hours ca. 14.218 h range L-W-H ca. 4 x 3 x 3 m weight approx. 12.500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Fpebu Ujvwgk Sjvz Uog prior sale!

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 5 identical machines available. The machines were used for light countersinking and drilling work. Fpebu Ujvdt Rfovz Ujg Changes and errors in the technical data and information, as well Subject to prior sale!