Used Valtra/Valmet 8350 Hi-Tech for sale (144,022)

Condition: good (used), Year of construction: 2000, X 800 mm , Y 800 mm, Z 800 mm 10.000 min-1 Fjb Hjvyrh Uolvalogb HSK 100 IKZ Parts shown by hand not come.

Condition: new, Year of construction: 2025, Production time of the machine approx. 3.5 months Fgob Hljffh Atjvalob Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Year of construction: 2003, Functionality: fully functional, cooling capacity: 446 kW (606.39 HP), type of cooling: air, overall weight: 7,246 kg, total width: 2,400 mm, total length: 5,800 mm, total height: 2,500 mm, warranty duration: 6 months, Aircooled chiller YORK YCAS0475EB 446 kW Fob Hewd Sfyolvalogb Cooling capacity: 446 kW / 126.82 tons (12/7 — 35°C) Year of manufacture: 2003 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. YORK DXS36LASA46/50 (screw) + 1 pcs. YORK DXS24LASB46/50 (screw) Type of refrigerant: R407c Number of fans: 8 pcs. Weight: 7246 kg. Dimensions: 5.8x2.4x2.5 m. Condition: Good

Condition: excellent (used), Year of construction: 2013, 2013 Highcon Euclid (Direct to Pack) Digital Cutting and Creasing Machine Atlas Copco GA45 Compressor with Elektronicon Control. Lauda UC-0650 2 Spix Highcon PWP SR TS °C Chiller. Maximum Speed 1,500 Sheets/Hour. Maximum Sheet Size 760 x 1,060 mm (30 x 42 inches). Maximum Stock Weight 550 gsm. Maximum Media Thickness 0.6 mm (24 pt.). Supported Substrates Label and Paperboard Thicknesses From 0.2 mm to 0.6 mm and N & F Microflute Up To 1.2 mm (47 pt.). Utilises Highcon's Patented Digital Adhesive Rule Technology (DART) For Creating Digital Crease Lines and High-speed Laser Cutting. S/No.TL 50053. Integrated Extraction LTG VSRMM250/8 RD360. Machine Dimensions (W)8,600 x (D)2,100 x (H)2,300mm. Machine Weight 6.5 Tonnes. Oil-Injected Rotary Screw Air Compressor. 125L/Sec. 45kW. 3,000RPM. Weight 1 Tonne. (W)1,680 x (D)850 x (H)1,550mm. Lauda Chiller Temperature Range -5°C - 25°C. Pressure Nominal 3.7Bar, Maximum 4.7Bar. Pump Flow Nominal 196L/Min, Maximum 420L/Min. 60dBA. Water Reservoir Volume 300L. (W)1,000 x (D)1,565 x (H)1,965mm. Donaldson Torit DCE ART 501/N4 RD0 Extraction Facility. 965m³/h. Filter 10 m² Cartridge Type. 75 dB(A). 1.5kW. (W)3,900 x (D)1,700 x (H)5,000. Chimney (H)5,500mm. See Additional Documentation Attached. Fgjb Hlvasv U A Syjljb

Condition: like new (used), MACHINE DATA TORNI TACCHI FTC model 51 OVERALL DIMENSIONS Center distance 4000 m/m Height 1550 m/m Febod Tm D Eo Hlvalogb Width 1400 m/m Length 6200 m/m Weight 10.000 Kg Swing over bed 1120 m/m Swing over carriage 810 m/m Swing over gap 1350 m/m Hole through spindle 123 m/m Number of speeds 18 Range of speeds 7-550 / 1’ Horsepower of motor 25HP Morse taper № 6 Metric threads – inch – module – pitch 3 jaw chuck 450 m/m Face plate 850 m/m Extra face plate 1420 m/m Good condition

Condition: good (used), Automation cell for tooth flank grinding machine, consisting of: Koenig Smart Loader V6 2 x160 KOENIG Automation AG Automated parts handling for loading of Reishauer RZ160 tooth flank grinding machine Double - swivel gripper Integrated oil spinning station n.i.O. / SPC station as drawer EKF - Stacking cell 3/2 - 600x400 Fsb Hlei Aphyjvalegb Workpiece feeding and workpiece storage for 3 trolleys with 12 baskets each, dimensions 400x600 mm, raw / finished parts feeding for Koenig - Automation Automation can continue to work seamlessly during workpiece carrier change in the stacking cell Carriage change possible without interruption of automatic operation, in current configuration 288 workpiece supply per basket stack Control Siemens Siematic S7, operation via Siemens Mobile Panel HT8 Oil drip tray under complete system. Evotech laser marking unit ETL 20F Laser cell for laser marking of the gears before the grinding process Fiber laser 20 W Marking field 110x110 Integrated IPC with marking software and monitor Integrated extraction system With shuttle for workpiece transport to automation cell. Automation cell suitable for Reishauer RZ 160 tooth flank machine. All technical data are subject to typing errors/errors. "Price on request". Sale only in countries of the EU.

Year of construction: 2001, Condition: like new (used), Parts shown by hand not come. Fgob Hlsg Rgtujvalsb

Condition: used, TECHNICAL DETAILS - Speed : 100 [rpm] - Programmable work pressure : 0 - 400 [kg] - Lapping wheel diameter : 410 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1200 x 2000 [mm] - Machine height : 2200 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 26630 [h] EQUIPMENT Fob Hlvaowdam Sjljgb - CNC : SIEMENS SIMATIC HMI - Coolant tank * with paper filtering unit - Cooling unit

Condition: good (used), Year of construction: 2015, Functionality: fully functional, cooling capacity: 33.8 kW (45.96 HP), type of cooling: air, overall weight: 460 kg, total width: 1,000 mm, total length: 1,600 mm, total height: 1,570 mm, warranty duration: 6 months, Aircooled chiller RHOSS TCAEY133 33.8 kW Cooling capacity: 33.8 kW / 9.61 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Panasonic C-SCP510H38B (scroll) Type of refrigerant: R410A Number of fans: 1 pcs. Dimensions: 1.6x1x1.57 m. Weight: 460 kg. Febewd R Rns Hlvaljgb Condition: Good

Condition: used, Year of construction: 2007, Technical details: x-travel: 700 mm y-travel: 630 mm z-travel: 700 mm weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,90 x 2,90 m pallet size:: 500 x 500 mm Fgsbswdyxhj Hlvalsb tool taper: SK 40 Tool taper: HSK-A 63 turning speed range: 10.000 U/min

Condition: new, pipe diameter: 350 mm, High-quality 2 mm suction pipes, 350 mm diameter – welded, robust quality for conveying abrasive materials – 2 m long, flanged Fsbjwcfvco Hlvalegb Special price as a special item ex works 49176 Hilter = €195.00/2 m piece

Condition: excellent (used), Functionality: unexamined, overall weight: 2,500 kg, fuel type: diesel, color: green, maximum load weight: 3,000 kg, Year of construction: 1989, operating hours: 11 h, Equipment: hydraulics, Brand: Hiab Model: 965/90 Year of manufacture: 1989 Serial number: 95196 Operating hours (read): 11 Fgeb Hlvjv Rvvkjalob Engine: Hatz Fuel: Diesel Voltage: 12 Dimensions (L x W x H) (mm): 3400 x 1000 x 2700 Weight (kg): approx. 2500 Number of units in stock: 1 Capacity (kg): 3000 kg x 3000 mm / 2000 kg x 4600 mm / 1400 kg x 8400 mm Made in the Netherlands Comments: Low hours self-propelled hydraulic crane

Year of construction: 2005, Condition: good (used), All parts shown by hand not come. Fjbod N I Ezj Hlvalegb VAT not included in price.

Condition: used, Year of construction: 2019, Functionality: fully functional, Complete system for sale 1 chiller and a cooling system. Fsb Hlvsv Npgmoaljgb

Condition: repair required (used), Year of construction: 2003, Functionality: unexamined, machine/vehicle number: J10M0065, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 19,700 mm, total length: 20,700 mm, total width: 20,500 mm, workpiece height (max.): 800 mm, workpiece width (max.): 600 mm, workpiece length (max.): 215 mm, type of input current: AC, table width: 590 mm, overall weight: 2,000 kg, table height: 510 mm, Machine was turned off before 1 year as functional, it was rarely used and the batteries on the servos ran out because of it so machine is not possible run, therefore I offer it as non-functional. MODEL: W21FAV-2 * Mitsubishi 64 Bit PC Based CNC Control * Submerged Machining Capability * Automatic Wire Threader (AT) * Wire Chopper * Automatic Fluid Level Control * Auto-Lock Vertical Tank Door Mechanism * Full 4-Sided Work Table * Color CRTWith 3D Graphics * Power Master Control (Automatically Adjusts Power Settings) * Standard Hand Pendant Control * Fine-Grain Dianite Casting Material * Moving Column Design * Auto Lube System * Filtration System * Electric Chiller System: Fgjbsr Igzko Hlvalsb * Direct Drive 25mm Ball Screws * Linear Motion Guide Ways * AC Servo Drives * Fine Resolution Encoder Feedback * All Available Manuals and Accessories

Year of construction: 2011, Condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Fob Hlvewc A Rksalsgb

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, specially designed for demanding machining tasks in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an excellent investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Feb Hlvasv Tcnrjljgb Positioning accuracy thanks to linear glass scales (no recalibration required) Innovative ISPG (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark discharge and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM linking for seamless data transfer Job management with prioritization and Real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-station electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-construction with high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality requirements ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and economical die-sinking EDM! 📌 Our used machine, built in 2015, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability.

Condition: like new (used), Year of construction: 2025, operating hours: 500 h, Functionality: fully functional, screw diameter: 70 mm, overall weight: 10,000 kg, total width: 4,000 mm, total length: 6,000 mm, total height: 3,500 mm, New perfectly working Chinese blow moulding machine for sale. - year of production is 2024, in operation from 2025. - two heads with four nests (i.e. it manufactures four products at the same time) - can produce bottles up to approximately 5 litres - two robotic arms - 450-500 products/hour Accessories: 1) gravimetric mixer 2) automatic feeding system 3) silent grinder Feb Hlewd Uphovalegb 4) conveyor belt system i) for finished products ii) for inline and rejects 5) liquid cooler 6) compressor (inverter) 7) pallet foiling with clamp 8) leak tester The machine can/must be viewed in operation, training and support can be provided on request. Please see attached a video of the machine in operation.

Condition: new, For many years the Basic series has been the reliable mechanic's lathes that have been used in countless workshops and training centers. The new PRO version offers improved performance and ergonomics, more standard equipment and also the design has been improved, to meet the demands of todays users. Fjb Hlvaouyhvxjljgb

Condition: used, Year of construction: 2019, operating hours: 10 h, Equipment: Almost unused sweeper with collection container and side brush for sale Suitable for front loader with Euro attachment Double-acting control unit required on front loader Fgobstllt Tj Hlvaljb Water pump controlled via triple plug

Condition: like new (used), Position 1 TS 125 Magnum tower clamping system Jaw width 125 mm Clamping widths: 1 x 476 mm 2 x 226 mm 4 x 108 mm overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7.850,00 € + VAT. Position 2 4 pieces hydraulic vices jaw width 125 mm overall length 400 mm Price per piece 850,00 EURO + VAT. Price for 4 pieces 3.000,00 EURO + VAT. Position 6 Preci Tool NC, type 125 Fgob Hloic Rnusvaleb jaw width 125 mm overall length 430 only 1 fixed jaw Price: according to bid position 8 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. Position 9 HILMA machine vice mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 550 mm Price: 900,00 € + VAT. item 10 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 380 mm Price: 650,00 € + VAT. item 11 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. position 12 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 620 mm Price: 1.050,00 € + VAT. Position 26 HILMA machine vice (exhibition version) jaw width 125 mm overall length 430 mm Price: according to bid item 28 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 570 mm Price: 700,00 € + VAT. Position 32 Clamping angle clamping surface 160 x 420 mm Price: 150,00 € + VAT. Position 33 Clamping angle with HILMA vice jaw width 125 and load cell Price: 450,00 € + VAT.

Condition: new, Functionality: fully functional, machine/vehicle number: SCROLL, motor manufacturer: HITACHI, power: 7.1 kW (9.65 HP), type of cooling: air, Brand new stock air condition scroll compressors ready to installed, SH733QC2-U--> 12.000BTU SG633GB1-S---> 9.500BTU SHV33YC6-G--->24.500BTU SH933RC4-U--->14.500BTU SHY33MC4-U--->18.000BTU Fsb Hlvaswf U Igjlogb

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D spindle tunring speed 20.000 U/min tool taper HSK 63 A-axis -95 / +95 ° Fjb Hlvev H Erasaljgb C-Axis 360 ° number of tool places 40 Pos.

Condition: new, The Basic 180 Super is the largest mechanics lathe in the KNUTH Machine Tools catalog and is also one of the heaviest machines in this popular market segment. The large bed width of 206 mm (8 in) and a 30 percent higher total weight have a positive effect on the overall machining quality and enable machining services that also meet industrial requirements. Equipped with position indicator, quick-change holder and other standard accessories, the BASIC 180 Super has been one of our best-selling conventional lathes for more than 20 years. Fgob Heuygz Tolvaleb

Condition: like new (used), Position 1 TS 125 Magnum tower clamping system Jaw width 125 mm Clamping widths: 1 x 476 mm 2 x 226 mm Fob Hljidl Rrjvalegb 4 x 108 mm overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7.850,00 € + VAT. Position 2 4 pieces hydraulic vices jaw width 125 mm overall length 400 mm Price per piece 850,00 EURO + VAT. Price for 4 pieces 3.000,00 EURO + VAT. Position 6 Preci Tool NC, type 125 jaw width 125 mm overall length 430 only 1 fixed jaw Price: according to bid position 8 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. Position 9 HILMA machine vice mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 550 mm Price: 900,00 € + VAT. item 10 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 380 mm Price: 650,00 € + VAT. item 11 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. position 12 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 620 mm Price: 1.050,00 € + VAT. Position 26 HILMA machine vice (exhibition version) jaw width 125 mm overall length 430 mm Price: according to bid item 28 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 570 mm Price: 700,00 € + VAT. Position 32 Clamping angle clamping surface 160 x 420 mm Price: 150,00 € + VAT. Position 33 Clamping angle with HILMA vice jaw width 125 and load cell Price: 450,00 € + VAT.