Used Valtra/Valmet 6250 Hi-Tech for sale (144,174)

Condition: new, Year of construction: 2025, Functionality: fully functional, The compact, lightweight conveyor is equipped with a high-speed carbon brush motor. Dob Hhpdsqgdkbe Nokl It is easy to install and provides excellent vacuum. Removable, user-friendly controls. All conveyors are equipped with a fabric filter and automatic reverse cleaning. Carbon brushes with automatic shut-off for maintenance alarm. Control is possible via the SPV-U proportional valve controller. 360° mounting possible. All conveyors are equipped with a fabric filter and automatic reverse cleaning with alarm.

Condition: used, Year of construction: 2018, operating hours: 5,826 h, 2018 | Hitachi | Hitachi ZX170W-6 with 3 buckets | Used Wheeled Excavator | 5826 hours 📍Location: France, Bordeaux 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 83000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 51 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ Dksbowdxvfj Hhpd Njl 📌 Inspector's Comment: The general condition of the machine is good. However, there is a slight deformation of the blade, two mirrors are missing from the right side of the cabin, there is a hydraulic leak, the tire wear is significant, and the bodywork around the counterweight is damaged. The blade cylinder guard plate is also damaged. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38986 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2021, operating hours: 364 h, Field of application: Construction Serial number: 30540xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19514 Specifications: - 2021 model - Hours: approx. 364 - Weight: 6550 kg - 88.4 kW - Chassis (see pictures) - Box - Lever steering - Two cameras, bottom and top - Extra light Description: Takeuchi TCR50 Crawler Dumper from 2021. It has only had 364 hours and is in excellent condition. The box is improved. Hardox plates have been placed on the bottom and the frames have been increased by 20 cm. It is certified and ready to be put into operation. Can be delivered within a short time. Watch video. Deb Hhpevyft Red Njkl Hours: 364 Own weight: 6550 Kw: 88.4

Condition: new, Year of construction: 2025, Functionality: fully functional, Description This machine is primarily designed for drilling and milling various aluminum profiles in all applications. An optional reversible work platform is available, allowing machining within a range of 270°. Dkeb Hhowhy U Repd Nsl Multiple operations can be performed with one clamping, resulting in higher machining precision. Each movement structure uses a servo motor + precision ball screw and linear guide rail configuration, ensuring excellent machining accuracy and stability. All movement components are equipped with automatic lubrication systems. The spindle is equipped with a mist cooler. The machine is equipped with the Taiwan Syntec CNC control system in combination with the MA series controller. The system has built-in programming templates, allowing users to start machining by simply entering basic machining dimensions. This makes the machining easy to learn and use, with minimal training requirements. Machining capabilities Functions: Drilling and milling Machining length: 0–3000 mm Machining width: 0–150 mm Machining height: 0–100 mm Machining angle: 0° single-sided machining; optional reversing function allows 0–270° three-sided machining Clamping system: Equipped with 6 movable workstations, each with independent side clamps (optional top clamps available); the number of workstations can be adjusted as required Technical specifications: Overall dimensions: 4400 x 1500 x 2100 mm (depending on the actual product) Speed: X-axis travel: 3000 mm Y-axis travel: 400 mm Z-axis travel: 280 mm Please contact us for more information, prices and delivery times

Condition: used, Year of construction: 2002, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Transtechnik GmbH Year of manufacture: 03/ 02 Condition: Used Model type: 110/ 650 total length: approx. 1120 mm total width incl. motor: ca. 830 mm Dksb Hhpdoktf Ncj Nol total width without motor: ca. 730 mm belt width: approx. 650 mm Belt type: Smooth Color: Stainless steel-grey/ black Material: Stainless steel Drive type: Drum motor Belt conveyor Due to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Functionality: fully functional, Year of construction: 1991, load capacity: 7,000 kg, lifting height: 3,300 mm, load center: 600 mm, fuel type: diesel, Older Forklift, not pretty but an old strong and reliable forklift Dkob Hhjwhi Iaopd Nel

Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: 2SG00002246, High-quality gear motor. The cutting chamber and gear motor of the SG-24T are from world-renowned manufacturers. The SG-14/24N series features a combined tooth and blade cutting edge. The cutting blades break large pieces into small ones, and the tooth cutting edge shreds the material with less dust. The cutting edge is designed to the desired size so that it can be reused immediately. Djb Hhpev Unt Aod Nokl The innovative cutting edge with inclined teeth reduces the possibility of stress concentration. It extends the service life and reduces dust generation. The motor shaft and rotor shaft of the SG-14/24T/24N are connected with a shaft coupling, allowing for convenient motor replacement. A signal light indicates a motor blockage, which can be cleared by reversing the motor. It automatically returns to normal operation once the fault is resolved. Compact design, easy to maintain and clean. Feed hopper made of transparent PC.

Condition: good (used), Thiel Produro 115 Filing machine - infinitely variable stroke and speed - stroke 40-120mm Dkob Hhponp I I Tod Nel - speed 60-300 min - table swivels 15 - weight approx. 500kg

Condition: new, Year of construction: 2025, Functionality: fully functional,

Condition: as good as new (ex-display), Year of construction: 2024, Technical Data: Roller table 3200mm double rollers / double precision guides Maximum blade diameter: 400mm 0º-45° electric blade tilt electric high/low Digital display of dimensions Dkeb Hhpjwhyzqod Nsl Control panel above the head Automatic parallel stop movement Double stop Motorized crosscut stop, length 1300mm Main blade motor: 5.5 kW scoring saw blade Ø100mm Power and motors Voltage: 400V/50Hz

Year of construction: 2025, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Dkob Hot Dig Eohpd Nsl The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Condition: used, Year of construction: 2021, Westtech Woodcracker C450 felling grapple Year of manufacture: 2021 Dkob Hhpdjwh Ebcs Nol New grapple cylinder - Cutting diameter for softwood (mm): 500 - Cutting diameter for hardwood (mm): 450 - Grapple opening (mm): 1,600 - Shear opening (mm): 800 - Weight (basic - fully equipped) (kg): 1,760 - 2,350 - Recommended flow rate for main circuit (l/min.): 80 - 160 - Recommended operating pressure (bar): 280 - Recommended flow rate for secondary circuit (l/min.): 45-60 - Operating weight of carrier vehicle (t): 20 - 25

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Dsb Hhpdsflz Hdj Nekl Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Year of construction: 2010, Condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Dob Hhpdeiy D Tme Nskl Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: used, Year of construction: 2017, thorn length: 4,500 mm, pipe diameter: 80 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): Dkjbottah Re Hhpd Nsl → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, Do you want to be able to mill, drill or saw yourself, then buy now for the lowest prices, Processing machines for processing wood, plastic or aluminum Then contact us now. All machines new and used go on sale. Panel saw 315/3200 Panel saw 400/3200  CNC machining machine 13/32 CNC machining machines 16/32 CNCBidgeVraft 13/32 CNC milling machine 16/32 CNC nesting machine 15/32 CNC automatic crosscut saw Maggi GT800 Drive-dowel drill Maggi-Technology BS21 drill-dowel CNC portal milling machine Milling, drilling 21/32 Dksb Hhpewhyp Ujd Nel various CNC accessories HSK63F, ISO30, collets,..etc.. Nicron1 13/32 CNC portal milling machine type Nesting CNC Z-AS 900 SPecial 15/30 CNC 220V 50Hz dimensions 1.000x900mm

Condition: new, Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, volume flow: 420 m³/h, Equipment: chassis, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Djb Hhjunh Nmspd Nskl Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: used, fuel type: diesel, Year of construction: 2014, operating hours: 12,624 h, Field of application: Construction Empty weight: 40.000 kg Dkjbswhih Ts Hhpd Nel Production country: NL Please contact Kristoff Van Havere for more information

Condition: new, Year of construction: 2025, Robot cell for pallet making Ekatech Automation AB Robot Nailer 4017 Dkob Hhpdeq Iv Eds Nsl

Condition: good (used), Functionality: fully functional, Length: Diagonal 190 cm Dob Hsv I Umvshpd Njkl Horizontal 90 cm Width 30 cm Height of crossbeams 4 cm 3 pieces available! Price €800 each!

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Djbetr U Hls Hhpd Nekl Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: used, Single-column hydraulic press with die cushion HIDROGARNE Type CF 80 Machine No. 2955, Year of manufacture 2015 First commissioned 2016 Pressing force 80 tons Slide stroke 450 mm Thrust 340 mm Installation height 650 mm Table area 800 x 550 mm Table bore Ø 55 / 30 mm Slide area 650 x 400 mm Die cushion force 25 tons (250 kN) Ejector force 25 tons (250 kN) Die cushion stroke 200 mm Die cushion area 500 x 380 mm Table height above floor 910 mm Max. hydraulic operating pressure 280 bar Hydraulic tank capacity 130 liters Advance speed in rapid traverse 110 mm/sec. Pressing speed 10 mm/sec. Return speed 160 mm/sec. Drive power 7.5 kW Power supply 400 V, 50 Hz - Operation and programming via SIEMENS touch panel - Ram stroke and press force programmable via the control system - Pressure and travel cut-off - Continuously programmable pressure hold time - Ram and die cushion equipped with direct travel measuring system - Die cushion under the table can also be used as an ejector - Table surface with holes for die cushion push rods - SICK light barrier as an anti-interference device for safety operation - Control cabinet with electrical control mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Foot switch operation only - Operating instructions and electrical diagram available - Accident prevention regulations for manual insertion work Press footprint L x W x H 1500 x 1260 x 2640 mm Weight 3.4 tons In very good condition Dkob Hhpdewd Sy Rs Nel

Year of construction: 2025, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled Dksb Hhpsunh H Ssd Njl - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, power: 210 kW (285.52 HP), fuel type: diesel, color: orange, Year of construction: 2017, operating hours: 9,898 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCMDDQ50L00080121 Technical information Track width: 80 cm AdBlue system: Yes Deb Hhpdev Iuy Ns Nokl Make of engine: 6HK1 Empty weight: 35.600 kg Other information Undercarriage condition: 95 Dipper / stick length: 290 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 114x36x33 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information NEW UNDERCARRIAGE!

Year of construction: 2020, Condition: used, General information New: Yes Serial number: 1034140 / 9290341 Weights Empty weight: 605 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: EX1200-6 EX1200-5 Delivery terms: EXW Dkobsv Rvfre Hhpd Nol Production country: JP Additional information Please contact Bart Apers, Jeroen Heindryckx or Matthias Eyckmans for more information