Used Valtra/Valmet 6550 Hi-Tech for sale (144,015)

Condition: used, power: 235 kW (319.51 HP), fuel type: diesel, color: orange, Year of construction: 2022, operating hours: 10,661 h, Equipment: air conditioning, General information Field of application: Construction Dob Eruewfzzgjc Rsut VIN: T04341 Serial number: HCMJAC91J00052040 Technical information Track width: 65 cm Empty weight: 47.000 kg Make of engine: Hitachi Functional Bucket capacity: 2,2 m³ Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 12,05x3,34x4,66 Production country: JP Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2004, operating hours: 13,115 h, Field of application: Construction Make of engine: HINO Lifting capacity: 70.000 kg Serial number: HY235 Production country: JP Please contact Arco Boer for more information Dueb Erowazfusuc Rst 70T Crawler crane IHI CCH 700 from 2004 30 meter boom Hookblock & Jibball Hino powered In very nice condition, well mainteained 70T crane.

Condition: new, Functionality: fully functional, overall weight: 26 kg, load capacity: 4 kg, arm reach: 541 mm, Brand new NACHI MZ04D robot. Dueb Erucevrc Ame Rst Specifications: Maximum reach: 541 mm Payload capacity: 4 kg Number of axes: 6 Repeatability: ±0.02 mm Body protection rating: IP40 (IP67) Upper arm protection rating: IP40 (IP67) Cleanroom rating: ISO Class 4 Hollow wrist or arm: Hollow wrist Mounting options: Floor, Inverted, Wall, Tilted Weight: 26 kg

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive Dsb Erucou Rpibe Rjut - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: good (used), Year of construction: 1993, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: HR7, power: 22 kW (29.91 HP), Wood Chipper, Shredder, and Chipper Dujb Ejwbgx Aoruc Rst Manufacturer: Gräf Maschinenbau GmbH Type HR 7 Serial No.: 0108 Year of manufacture: 1993 Motor: 22 kW Dimensions: approx. L: 165 cm, W: 140 cm, H: 166 cm Wood inlet opening: approx. 42 x 60 cm

Condition: new, Year of construction: 2021, Functionality: fully functional, The Z-shaped conveyor belt with plastic slats is for sale. A WhatsApp video of the belt is also available upon request. Infeed: 600 mm Grade: 1900 mm Discharge: 500 mm Usable width: 300 mm Discharge height: 1400 mm - 1600 mm Constant belt speed: 3 m/min Mobile Tread height: 50 mm every 380 mm Dusb Erewbm Ttsuc Rot

Condition: good (used), power: 235 kW (319.51 HP), fuel type: diesel, color: orange, Year of construction: 2022, operating hours: 13,245 h, Equipment: air conditioning, General information Field of application: Construction VIN: T04286 Serial number: HCMJAC91H00051977 Technical information Track width: 65 cm Empty weight: 47.000 kg Dsb Eruswfzyiec Reut Make of engine: AA-6WG1TQA Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 12,05x3,34x4,66 Production country: JP Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, Haas Drum Chipper 90kw Machine is ready for immediately use Dusb Erjvxutdouc Ret Four infeed rollers Two Knives one anvil, also spare knives and anvils Spare knives holder 600mm wide shaker infeed

Condition: used, Year of construction: 2019, Year of manufacture: 2019 Field of application: Agriculture GVW: 22.000 kg Tipper: Back Metaltech PBN 20. Year: 2019. 9 tons BPW axles. Max weight: 22.000 kg. Max speed: 40 KMH. Airbraked. 1 point hydraulic outrigger. Duob Erujwa N Uqoc Ret Works on Hydraulic from the tractor. Hydraulic tailgate. Dimmensions inside Mammut backwards kipper: L: 5000 mm. W: 2200 mm. H: 1000 mm. Tyres: 650/55R26.5 40%. German trailer! ID 387. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers Dusb Eruevdcc Rjc Rot 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Year of construction: 1985, Condition: used, Technical manuals and tool holders available; further technical data: Drilling capacity in ST 60 20mm Threading capacity M16 milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5,7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM step jump 1,12 spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y-axis 15 m / min Feed force of the X- and Y- axis 6000 N Programmable feed in all three axes 1 to 4000 mm/min Spindle overhang to guide 300 mm Distance between spindle and table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter with full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. Dob Eebwn Rhoruc Rout cut to cut time approx. 3,2 sec. total connected load approx. 15 kW (but needs only approx. 5~10 kW in operation) Machine weight approx. 3,5 to. needs commercial compressed air connection distance measuring systems = glass measuring scales spindle conveyor with ejection height 850 mm; make: KNOLL type: 240 S-1/150; incl. documents Shifting table for

Condition: used, Functionality: fully functional, mileage: 98,255 km, power: 96 kW (130.52 HP), first registration: 01/2021, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 450 kg, maximum load weight: 3,500 kg, empty load weight: 3,050 kg, tire size: 195/75 R 16C, next inspection (TÜV): 01/2025, fuel: diesel, energy efficiency: A+, wheelbase: 2,500 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space volume: 5.5 m³, loading space width: 1,700 mm, loading space length: 3,200 mm, loading space height: 1,200 mm, Year of construction: 2021, machine/vehicle number: TYBFEA01BLDC07725, Equipment: ABS, central locking, hydraulics, BRAND MITSUBISHI TYPE REAR TIPPING WASTE COMPACTOR MODEL FUSO CANTER 3S13 DATE OF REGISTRATION 01/2021 KM TRAVELLED 98255 POWER (HP/KW) 130HP EMISSION Euro 6 CONDITION Used EQUIPMENT TECH SERVICES COMPACTOR MODEL C-TECH 5AVC - 5.5 M3 - WITH REAR TIPPING TANK - BIN LIFTER FOR 80LT TO 390LT BINS AND PIN LIFTING FOR ALL DIN STANDARD CONTAINERS Dsbewc Aars Eruc Rout RADIO ELECTRIC WINDOWS _____ ALL VEHICLES FOR SALE CAN BE CHECKED AND CONTROLLED. OUR SALES PEOPLE ARE AT YOUR DISPOSAL FROM MONDAY TO FRIDAY FROM 8.30 TO 18.00 AND ON SATURDAY FROM 8.00 TO 12.00. TO REACH US BY CAR EXIT MOTORWAY A31 THIENE, BY TRAIN THIENE FS STATION. Trucks Italiana srl Dealer

Condition: good (used), power: 235 kW (319.51 HP), fuel type: diesel, color: orange, Year of construction: 2022, operating hours: 8,728 h, Equipment: air conditioning, General information Dujbowfzvde Eruc Ret Field of application: Construction VIN: T04344 Serial number: HCMJAC91V00052056 Technical information Track width: 65 cm Empty weight: 47.000 kg Make of engine: Isuzu Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 12,05x3,34x4,66 Production country: JP Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information *It will be sold with standard digging bucket, hence grapple not included

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, Functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Dsb Erusu Th S Sjc Reut Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, fuel type: diesel, Year of construction: 2019, operating hours: 1,533 h, Year of manufacture: 2019 Field of application: Construction Drive: Track Dueb Eruowa Nx Aec Rjt CE mark: yes Price: On request Red Rhino 7000. Year: 2019. Hours: 1533. CE Machine. Deutz engine. Pads: 300 mm (steel). belt. Remote Control. 700x400 mm. Jaw crusher. UC: 80%. ID NR: 167. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Year of construction: 2024, Condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed - 2x75 sawing motors - 3 KW feed gearbox Dob Eevdahworuc Rout - 70 mm soindle diameter - 400 mm sawblade diameter - 5000 Kg weight

Condition: good (used), power: 235 kW (319.51 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 6,035 h, Equipment: air conditioning, General information Field of application: Construction VIN: T04397 Serial number: HCMDDE92T00045321 Dueb Eruewfzu Hec Rst Technical information Track width: 65 cm Empty weight: 35.600 kg Make of engine: Isuzu Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 10,97x3,19x3,12 Production country: JP Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, Functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Dujb Eruju Thabjc Rot Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2024, working width: 600 mm, saw blade bore: 70 mm, max. cutting height 160 mm max. cutting width 600 mm feed 5-30 m/min. Saw motor 55 KW feed motor 2,2 kW max. saw blade insert at 145 mm 6 Saw shaft diameter 70 mm CE compliant design Control cabinet and control panel Weight 3,200 kg Dusb Erovcn D Rsuc Rjt Special equipment - Electric height adjustment of the feed rollers

Condition: good (used), power: 125 kW (169.95 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 2,021 h, Equipment: air conditioning, General information Field of application: Construction VIN: T04462 Serial number: THEDCOLOA00001588 Technical information Track width: 60 cm Empty weight: 21.400 kg Make of engine: Isuzu Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,76x2,39x3,15 Production country: JP Dobswfzuys Eruc Rsut Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information NOTE: -Will be sold with standard bucket hence crusher not included.

Condition: good (used), Year of construction: 2015, operating hours: 19,173 h, Functionality: fully functional, pressing force: 150 t, filling opening width: 1,100 mm, filling opening length: 2,000 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 35,800 kg, oil tank capacity: 4,300 l, Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Dob Eruceu Thfdo Rsut Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 piece maintenance platform on the baling channel 1 piece Feed hopper 1 piece Drop chute 10 pieces wire reel stands 2 pieces wire drawing stations with deflection rollers 1 set of machine documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation) Remarks: The machine is still completely assembled and available at short notice. Dismantling and loading is the responsibility of the buyer. The documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation declaration) is available in German. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Dusb Erou Tg Nnsuc Ret Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Dsb Ersu Tg Rrouc Reut Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleaning are the greatest advantages of this plant technology. Remark: The screen plates / screen segments have been covered with steel plates without a screening function over the course of time for use in the paper sorting system. The steel plates are only attached and can be removed again. Remarks on the overall layout: Technical documentation for the machine is only available in German. An inspection of the machine is possible by arrangement. We do not accept any liability for the technical data or any errors.

Year of construction: 2013, Condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Dusb Eruju Thpnjc Rot Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Dujb Erucju Thypo Rot Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.