Used Barford Sxr 3000 for sale (6,724)

Condition: new, Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115 Djln Njui Rpxju Hujut

Condition: used, Year of construction: 2002, turning diameter 330 mm swing diameter 610 mm turning length 1500 mm Duoln Nu Hjwhqrmjujt control Mazatrol Fusion 640 MT spindle bore 88 mm turning speeds 35 - 3000 U/min milling head speed 15 - 10.000 U/min x-axis 580 mm y-axis 230 mm z-axis 1695 mm C-axis 0,001 ° milling head -swivable ° tool magacine with 40 tool taper Capto C6 total power requirement 32,7 kW weight of the machine ca. 9650 Kg dimensions of the machine ca. 5,9 x 2,4 x 2,2 m Röhm Duro-NC 320/3 chuck; 1 set of hard stepped jaws / 1 set of hard base jaws with soft top jaws Chuck key Tool-Eye Renishaw probe ready Renishaw MP10 probe Tailstock Chip conveyor / standard pump / high-pressure pump / gap filter

Condition: good (used), Year of construction: 1993, machine/vehicle number: 190238, With motorized backgauge, numerical control, manual bending beam lowering, and foot switch. Dusln Nu Hev Tvipeust The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width: 3020 mm Steel sheet thickness: 2.0 mm Aluminum sheet thickness: 3.0 mm Stainless steel sheet thickness: 1.5 mm Backgauge: 1000 mm Color: green Total power requirement: 400 V Space requirement: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm Without roller shears/ Opening width: 200 mm

Condition: used, No. 04400 Roller conveyor trolley / loading station Ruchser RU-RWSF / RU-VL Used Consisting of 2 units: - Roller conveyor trolley Ruchser RU-RWSF 30/7 With wide roller conveyor approx. 500 mm Height from roller conveyor approx. 1600 mm, length approx. 3000 mm Can be moved on rails (rails not included in scope of delivery) Transport dimensions approx. 3000 x 850 x 1900 mm, weight approx. 200 kg - Loading station Ruchser RU-VL 1600 For loading order picking trolleys Dolsvdwa Rsn Nu Husut Can be moved on rails (rails not included in scope of delivery) The loading device moves under the order picking trolley and pneumatically lifts the window so that it protrudes slightly and can be rolled away Transport dimensions approx. 1650 x 1200 x 400, weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in Deln Nu Hevnh T Neusut 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 992.00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 21.00 euros 12 mm brackets (package of 3000 pieces): Price 31.00 euros 10 mm staples (package of 3000 pieces): Price 31.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, overall weight: 45,000 kg, empty load weight: 12,900 kg, maximum load weight: 25,560 kg, axle configuration: 2 axles, first registration: 05/2018, tire size: 245/70 R17,5, Equipment: ABS, | DOLL 2-axle low bed | Iron loading ramps | Removable gooseneck with hydraulic support, | 2 axles steered with radio remote control | Rear air suspension adjustable left and right, | Length/width: 13500mm / 2550mm | Extendable to 19,162 mm 6m | Widenable to 3000mm | Tires: 245/70 R17.5 twin tires, | Own weight: 12,900kg, Gross vehicle weight: 45,000 kg | NL: 25560kg | Fifth wheel height 135cm | Good condition | Errors, input and advance sales excepted. Duelnjwh Trvs Nu Hujt

Condition: good (used), Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Dsln Nuju Tqm Re Huout Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

Condition: excellent (used), Year of construction: 2019, total height: 4,532 mm, controller manufacturer: SIEMENS, controller model: 840 D SL, power: 210 kW (285.52 HP), overall weight: 23,000 kg, space requirement length: 13,480 mm, space requirement width: 10,502 mm, CONTROLS Dslsv Hglbsn Nu Husut .. CNC controls SIEMENS 840 D SL DIMENSIONS / WEIGHTS .. space requirements -left/right-: 13480 mm .. space requirements -front/back-: 10502 mm .. total height: 4532 mm .. total weight approx.: 23000 kg ELECTRICAL SPECIFICATIONS .. total power consumption: 210 kW .. mains voltage: 400 V .. mains frequency: 50 Hz asic machine system with 10 stations Station 1: Component loading (multi-axis handling) Station 2: Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling (max. 15,000 rpm) Station 3: Sauter 112 crown turret (3 spindle units) HSK 40 with external cooling 1 SEMA AE2-35/50/NC 2-axis unit Station 4: 1 SE – HSK 50C spindle unit including internal cooling (max. 15,000 rpm) Station 5: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling Station 6: 1 Sauter 112 crown turret (3 spindle units) HSK 40 with internal cooling 1 SEMA 2-axis unit AE1-35/50/NC Station 7: 1 hydraulic docking unit including C-axis positioning unit (1 2-axis unit SEMA AE1-35/50/NC) Station 8: 1 hydraulic docking unit including C-axis for positioning 1 permanently integrated angle head Benz or equivalent Station 9: 1 2-axis unit SEMA AE3-35/50/NC Station 10: Permanently integrated angle,S-35/50/NC Station 11: Blow-off inside/outside

Condition: excellent (used), Year of construction: 1990, Kölle Sizing Edge Milling Machine with Belt Feed Deln Nu Hjv Trunjusut Type: FKF For plastic panels, varnished panels, and solid wood For milling, jointing, flush trimming, and trimming improperly bonded edges This machine produces chip-free edges. Table length: 3000 mm Table height: 620 mm Milling width: 45 mm Max. chip removal: 4 mm Milling speed: 8000 rpm Milling motor: 2 HP Feed speed: 11 m/min Feed motor: 0.5 HP Chip extraction nozzle: Diameter: 100 mm Required space: 3000 x 450 mm Net weight: 400 kg Location: Arrives at the end of April at our warehouse in 54634 Bitburg - Delivery as is - no warranty - - Free shipping -

Condition: used, Year of construction: 2009, table length: 2,600 mm, power: 7.5 kW (10.20 HP), table width: 920 mm, No. 04469 Spindle moulder / swivel spindle milling machine Casolin F 45 KL EVO Used, year of construction 2009 Very heavy version with full equipment Control unit EVO EL 2 with programming functions The body of the machine consists of one part Spindle swivels +/- 45.5° on both sides 4-axis control EVO Spindle diameter 30 mm Effective height of the spindle 140 mm Maximum tool diameter for profile milling 250 mm Maximum tool diameter for tenoning 300 mm Motor power 7.5 kW Direction of rotation right/left Speeds 3000 / 4500 / 6000 / 8000 / 10000 rpm Table with extensions 2600 x 920 mm LW Duelnjwhck Uj Nu Hust Including 3-roller feed unit Maggi 2 suction connections each 120 mm diameter Transport dimensions approx. 2600 x 1500 x 2000 mm LWH Weight approx. 1350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2781 Weinig Unicontrol 6 Online ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser aiming light for detecting the saw section Length stop CNC controlled ----- > Length 3500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenon and slot spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 axially clocked feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g. glass-parted rungs) Rung guide consisting of: Rung support bar from above in the area of ??the profile milling unit vertically right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 4 positions, manual Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 110 mm, 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.8 kW Other features ----- > online-capable Dujlnsv E R Ikj Nu Huet > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-free rebating > Milling carriage for milling sashes with frame widths of less than 500 mm. Automatic pneumatic clamping. Minimum frame height 450 mm > Double parts package > Return conveyor for 1-man operation: swivel belt > Screen control > Studio window device > Electronic angle display for studio windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: -----...

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Dolnowg Take Nu Huout Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Code: 0432 Brand: STETON Model: STP - CE Standard Automatic hydraulic clamp with mobile beam for wooden frames, frames and various - CE Standard Technical data: Useful working capacity mm 3000 x 2000 N° 2 horizontal cylinders diameter mm 50 - 1300 Horizontal stroke kg 5000 N° 2 vertical cylinders diameter mm 80 - 1100 Horizontal stroke kg 13000 Dsln Nu Heu N E Rxsueut Max pressure kg/cm2 160 Motor Kw 2,2 N° 3 positions of support bar N° 7 positions of horizontal reference stops Automatic control board Overall dimensions mm 3900 x 1200 x 2680 h Weight kg 1800

Condition: used, Year of construction: 2012, travel distance X-axis: 830 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 4,500 rpm, turning diameter: 150 mm, total height: 3,000 mm, overall weight: 15,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 DSL, number of spindles: 2, space requirement length: 4,300 mm, space requirement width: 2,550 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK 840 DSL BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 WORKING RANGE TURNING .. turning diameter (max): 150 mm MAIN SPINDLE .. spindle revolutions (max): 4500 /min X/Z SLIDE .. Z-axis travel: 180 mm Duelov Uv Etsn Nu Huot .. X-axis travel: 830 mm .. traverse velocity Z (max): 3000 mm/min .. traverse velocity X (max): 60000 mm/min .. number of tool positions (total): 12 ELECTRICAL SPECIFICATIONS .. mains voltage: 24 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4300 mm .. space requirements -front/back-: 2550 mm .. total height: 3000 mm .. total weight approx.: 15000 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. band filtration unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. hydraulic system: yes .. European CE standards: yes Technology: Double spindle vertical turning center - 2 x main spindle (left + right) - max. chuck Ø 215mm - Knoll chip conveyor - Machine-centered feed belt with robot gripper

Condition: excellent (used), Year of construction: 1984, Joos Veneer Press - Top Condition - Gold anodized heating plates Safety step bar Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: Electric Plate surface: Gold anodized Pressing pressure: 90 t Number of cylinders: 4 Current consumption: approx. 33 A Machine length: 3000 mm Machine width: approx. 1400 mm Dusln Nu Hjv Tfzzjuot Weight: 2750 kg Location: Arrives at the end of April at the warehouse in 54634 Bitburg - Free on freight - Handed over as is - no guarantee - no warranty

Condition: used, mileage: 368,000 km, Year of construction: 2014, Serial number: YV2RG40C5EA75xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20230 Specifications: Km: approx. 368,000 (can increase) Transmission: Automatic Full air suspension Euro 5 551 hp Tires (see pictures) The building is older than the truck 5 rooms: 2000L, 4000L, 5000L, 3000L, 3000L Total volume: 17 m 6x2 Dueln Nujwdu Nze Hust Trailer hitch VBG Sand spreaders (uncertain condition) Bed Radio/CD Air conditioning/AC Video is attached Ready for delivery Description:Volvo FH540 6x2 tanker from 2014.A total of 17 m divided into 5 rooms.The truck has recently been EU approved and is ready for delivery. Km: 368000 HK: 550 Technical approved: Yes EU-approved until: 31.01.2026 Own weight: 13100 Total Weight: 27000 Payload: 13825 Width: 250 Length: 893 Euro: 5 Gearbox: Automatic

Condition: new, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. Dsln Njvzt D Tju Husut - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: ready for operation (used), Year of construction: 2001, Main Drive Spindle speed range 30000 Number of axis 3 This 3-axis MECANUMERIC Mecapro 3015 was manufactured in 2001. Ideal for precision CNC routing, this machine offers robust construction and reliable performance. Consider the opportunity to buy this MECANUMERIC Mecapro 3015 CNC router. Contact us for more information. Duolewh A Rben Nu Hujt Application Types Milling (Wood)

Condition: good (used), Code: 0287 Brand: UNITEAM Model: MAJOR - CE Standard 5-axis CNC working centre - CE Standard Technical data: N° 2 5-axis milling routers with rotary tool changer with 12 spindles each Milling unit motor Kw 11 - Rpm 1000/18000 Double tool changer Working range X axis mm 5000 Working range Y axis mm 1800 Max workpiece thickness mm 600 Stroke X axis mm 6450 Stroke Y axis mm 2200 N° 2 Nesting tables n° 6 pneumatic reference stops each Lathe unit Dolnotphn Re Nu Huout N° 4 vacuum pumps Becker m3 250 each Installed electric power Kw 30 Operating air pressure 7-8 bar Overall dimensions for transport: Machine mm 9200 x 2400 x 3400 h - 1° Working table mm 2800 x 3000 x 900 h - 2° Working table mm 2800 x 3000 x 900 h - Protection nets mm 2100 x 1000 x 700 h - No. 4 vacuum pumps mm 1200 x 700 x 600 each Total weight kg 9000

Condition: used, Year of construction: 2008, travel distance X-axis: 1,700 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,400 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 3,959 mm, table width: 1,000 mm, table length: 1,000 mm, overall weight: 30,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37 W, space requirement length: 9,007 mm, space requirement width: 5,676 mm, CONTROLS .. CNC controls MAZATROL 640M WORKING RANGE -CUBIC- .. X-axis travel: 1700 mm .. Y-axis travel: 1400 mm Dslnjwhbufo Nu Hueut .. Z-axis travel: 1400 mm TABLE .. table surface (left-right): 1000 mm .. table surface (front-back): 1000 mm .. workpiece load (max): 3000 kg SPINDLE / HEAD .. spindle revolutions (min): 35 /min .. spindle revolutions (max): 10000 /min .. drive power: 37 kW .. spindle torque: 525 Nm AXIS DRIVES .. rapid traverse: 40000 mm/min .. rapid traverse X: 40000 mm/min .. rapid traverse Y: 40000 mm/min .. rapid traverse Z: 40000 mm/min TOOL MAGAZINE .. magazin type: chain magazine .. number of positions: 160 .. tool diameter max.: 135 mm .. - with free neighbour positions: 260 mm .. tool length max.: 650 mm .. tool weight max.: 30 kg .. tool changing time: 6.9 s AUTOMATIC WORKLOAD EQUIPMENT .. store type: pallet changer .. number of store positions: 12 .. number of pallets: 12 ELECTRICAL SPECIFICATIONS .. mains power supply: 100 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9007 mm .. space requirements -front/back-: 5676 mm .. total height: 3959 mm .. total weight approx.: 30000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: no .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes We are selling 2 Mazak FH-10800 built in 2008 and 2006, including pallet station. -Capacity for 12 pallets - Tool holder SK 50 (Din 69871 A) -Hangs on central cooling, high pressure pump is included -Clamping cubes each 500x1000x1500 mm and 650x650x1500 mm

Condition: new, Set of abrasives for wide belt sanders Manufacturer: EKAMANT Types: ARKFEO, ARKFO, EKA 3000, and EKA 3001 Grits 80, 120, 150, 240, 320, 400, 600, and 800, 1 box of each, only 320 grit is available twice. All boxes are unopened and contain 9, 10, or 11 belts. A total of 90 sanding belts are included. Sanding belt dimensions: 1350 x 2150 mm This size is suitable for many Homag Sandteq machines, Bütfering Vega, and many others. Dsln Nu Hjv T Nmnousut Please check the exact dimensions for your machine. Sold only as a set, not individually. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse ready for demonstration; see "Other offers from this supplier."

Condition: used, Year of construction: 2018, operating hours: 1,600 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20216 Specifications: 2018 model. 1600 hours. Hanging screen, can be dismantled, handles up to 300 tons per hour. Jaw crusher, opening 1040 x 700 MM. 33,000 kg dead weight. Magnetic tape.   Description: Works as it should. Few hours. Hanging screen that can handle up to 300 tons per hour. Magnetic tape. St rp Iceland n , but delivered Rotterdam or Hirtshals included in the price. Dujln Newdu Azsu Hust Hours: 1600 Total Weight: 33000

Condition: good (used), Year of construction: 2019, machine/vehicle number: KE2019025, Plasma cutting system from Koike Gammatec in TOP condition! Deln Njri Nawou Hueut with the following components: Incl. flame cutting table 3000 x 1500mm with sectional flap control incl. plasma source Kjellberg HiFocus 280i with automatic gas console incl. external control unit incl. guides, gantry and height control without filter system! Available immediately!

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Duslotu Hy Esn Nu Huet Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: good (used), Code: 0070 Brand: AGLA Model: 1200 Oscillating roll polishing machine for polyester and varnish It is suitable for buffing of polyurethane paints, metals, marble and similar Dueln Nu Hov Rxalsujt Technical data: Working width mm 1200 Working height mm 240 Brush diameter mm 350 Motor Hp 10 Table dimensions mm 2900 x 1350 Overall dimensions mm 3000 x 2200 x 1650 h Weight kg 1500