Used Doosan D25S-5 for sale (420)

Condition: used, Year of construction: 2012, operating hours: 5,534 h, fuel type: diesel, motor manufacturer: cummins, Field of application: Construction Empty weight: 1.977 kg Generator capacity: 40 kVA Cgolqougrarexctzet Please contact Sales Department for more information

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Cgoljqzhfxeqxctzet Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: like new (used), Year of construction: 2015, Functionality: fully functional, Equipment: documentation/manual, Used CNC lathe Doosan model Puma 2100SY. Colqotx Tn Doxctzogt Fanuc i-Series CNC, max. rotating diameter on bench 780 mm; max. rotating diameter on carriage 630 mm; max. turning diameter 406 mm; max. turning length 520 mm; bar passage 65 mm; spindle nose ASA A2-6; spindle bore 52 mm; Bellegrandi collet holder on main spindle; spindle rotation speed 5000 rpm; spindle motor power 18.5 kW; X-axis travel 260 mm; Z-axis travel 590 mm; Y-axis travel +102 -51 mm; B-axis travel 590 mm; X/Z/B-axis rapid feed 30 m/min; Y-axis rapid feed 10 m/min; BMT65 turret; number of tool positions 12; motor-driven tool rotation speed 5000 rpm; with counter spindle; counter spindle bore 45 mm; counter spindle nose ASA A2-5; Bellegrandi collet holder on counter spindle; counter spindle stroke 120 mm; complete with: Carpet chip conveyor, presetter, hand and workpiece collecting belt, no.5 toolholders of which 3 are static and 2 are motorized (one radial and one axial).

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 288 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Electromechanical Condition: As good as new Technical condition: very good Front tires type: Superelastic Front tires size: 23x10-12 Rear tires type: Superelastic Rear tires size: 18x7-8 Battery voltage: 80V Cjlovm E N Soqxctzegt Battery Ah: 620Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2022 Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used vehicle, even if you don't buy a vehicle from us. Hire purchase & financing at favorable conditions are available on request. We will be happy to advise you competently and in detail about our vehicles. Side shift, 3rd valve, 4th valve, rear work light, front work light, full cabin, full free lift, interior mirror, windshield wiper, single pedal, LED, seat,

Year of construction: 2014, Condition: excellent (used), Machine travel (X-axis) 1020mm, (y axis) 540mm (z axis) 510mm X Axis Rapid Traverse 36 m/min Y Axis Rapid Traverse 36 m/min Z Axis Rapid Traverse 30 m/min Max. Spindle Speed 12000 r/min Max. Spindle Power 18.5 kW Max. Spindle Torque 353.2 N·m Table Length 12000 mm Table Width 540 mm Max. Table Weight 800 kg No. of tool station 30 Machine Length 2412mm, Width 3110mm and Height 3143mm Weight 6500kg Spindle nose: MAS BT 40 Feed range 1 - 15000 mm/min Colqxctslz Nxhszjgt Fanuc Doosan I Series control RenishawTouch Probe 4th axis ready

Condition: excellent (used), Year of construction: 2001, turning diameter: 380 mm, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm Celqovcmfmexctzsgt SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: used, Year of construction: 2013, operating hours: 4,294 h, fuel type: diesel, motor manufacturer: Yanmar 4TNV88, Field of application: Construction Empty weight: 1.020 kg Generator capacity: 20 kVA Cgolqxcsq Dhx Tjtzst Please contact Sales Department for more information

Condition: used, Functionality: fully functional, Year of construction: 2024, load capacity: 1,800 kg, lifting height: 2,090 mm, fuel type: electric, mast type: duplex, construction height: 1,445 mm, fork length: 1,195 mm, drive type: Elektro, Double-deck forklift Load centre of gravity: 600 Fork width: 185 mm Mast type: Duplex Technical condition: New Front tires type: Vulkollan Front tires condition: 80 - 100% Rear tires type: Vulkollan Celqxetqwufsctzegt Rear tires condition: 80 - 100% Battery voltage: 24V Battery Ah: 160Ah Battery year of manufacture: 2024 Description: Find your suitable used forklift now! STA-TECH offers you a large selection of used equipment. Regardless of whether you need a pallet truck, electric, diesel or LPG forklift - with our extensive range of inexpensive, ready-to-drive used forklifts to new forklifts, we can offer you a suitable solution! You can find other used forklifts from our inventory here: sta-tech/used forklifts STA-TECH is your partner for: ● Purchase and rental of new and used forklifts and warehouse technology ● Purchase of used equipment and uncomplicated logistics ● Comprehensive, cross-manufacturer service - from repairs to maintenance and testing

Condition: good (used), Year of construction: 2015, 700mm Swing, 550mm max. machining diameter, 2093mm between centres, 2000rpm spindle, 117mm bar capacity, Colqxcjvazb Djtzogt 10 station turret 26kW spindle motor, FANUC 32i control, 381mm 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant.

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Celqxctothb Icjzogt Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1500 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Cjlqxet H Nbuoctzegt Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. Cslqxceullmdjtzegt * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: used, Year of construction: 2011, Field of application: Construction Capacity: 25,5 m³/m Cgjlqxcotrqyqstzjt Compressor type: Screw compressors Transport dimensions (LxWxH): 1.55x1.32x1.45 Working pressure: 24.1 bar Please contact Sales Department for more information

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Serial: DG01041 Cslqsiy Nppsxctzogt Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: good (used), Year of construction: 2018, Swing over bed 850mm, Swing over cross-slide 670mm, maximum machining diameter 420mm, maximum machining length 2125mm, bar capacity 102 mm, Y axis -/+ 65mm, 12 station turret, spindle speed 2,800 rpm, milling speed 5,000rpm, Colqxctet I Ey Njzsgt Fanuc I control, tool setter, high pressure coolant , 12” 3 jaw and swarf conveyor.

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan P126TI, General information Field of application: Construction Serial number: EDIOAO183496 Weights Empty weight: 2.985 kg Functional Generator capacity: 275 kVA Cjler H A D Aeqxctzjgt Other information Fuel consumption: 43 Liter/Hour at 75% Load Generator: Mecc Alte ECO38 1L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 470 l Transport dimensions (LxWxH): 3,96x1,36x2,17 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Colqxcteqqivvozjgt Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: good (used), Year of construction: 2018, operating hours: 755 h, General information Field of application: Construction Drivetrain Make of engine: Kubota D1005 Weights Empty weight: 515 kg Functional Capacity: 2 m³/m Condition Technical condition: good Visual appearance: good Other information Compressor type: Screw compressors Transport dimensions (LxWxH): 2.7x1.32x1.1 Cgolqeq Eauiexctzot Working pressure: 7 bar Additional information Please contact Sales Department for more information

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, Cgeljqzx Tnoqxctzet 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 32iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan P086TI-1, General information Field of application: Construction Serial number: P086TI-1 Weights Empty weight: 1.950 kg Cgslqxcekhnrdotzst Functional Generator capacity: 165 kVA Other information Fuel consumption: 26.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Transport dimensions (LxWxH): 3,35x1,13x1,8 Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, Cgelqxcoq T Rt Detzst spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan P126TI-II, General information Field of application: Construction Serial number: EDIOC0183027 Weights Empty weight: 3.100 kg Functional Generator capacity: 330 kVA Cslor H A D Heqxctzegt Other information Fuel consumption: 47 Liter per Hour at 75% Load Generator: Mecc Alte ECO38 2L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 470 l Transport dimensions (LxWxH): 3,96x1,36x2,17 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC spindle taper BT40, spindle power 18.5 kW, Fanuc control, Cgolqxceu T Iybjtzjt coolant, swarf conveyor and probe.

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Serial number: DP180LA Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA Cjlqokhmkbjxctzegt Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Arjen van Dijk or Kenny Bongers for more information

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP126LB, General information Field of application: Construction Weights Empty weight: 3.382 kg Functional Cgslqxctskhmi Eozjt Generator capacity: 410 kVA Other information Fuel consumption: 57.1 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 625 l Transport dimensions (LxWxH): 4,15x1,4x2,1 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information