Used New Holland-Kobelco E235Sr Nlc for sale (23,475)

Condition: good (used), Year of construction: 2009, Traverses X Y Z: 6300 x 1200 x 2000mm, Table 7000 x 1200mm, B axis 360 degrees via 1 degree increments, Dsln T Hyewga Rpspeut A axis -/+ 45 degrees via 2.5 degree increments, Heidenhain iTNC530, ISO 50 spindle taper, 15,000rpm Spindle Speed, 30 station toolchanger, high pressure through spindle coolant, Interlocked guards, swarf conveyor. New spindle fitted 2025.

Condition: new, The X.mill T series is the newest generation of our vertical machining centers, with modern high-performance compact CNC controls. Whether equipped with Siemens or Fanuc controls, this series offers an excellent price-performance ratio. Wide range of accessories for easy adaptation to meet your specific requirements. Using state-of-the-art FEM Analysis Software, we were able to achieve the highest machine frame rigidity in this machine class Dsln T Hysu E I Rtjpeut

Condition: used, New: No Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19661 Specifications: - Width: U30 - Weight: 294 kg - Recommended machine weight: 10-14 tons - Ready for delivery Total Weight: 294 Deln T Hjvyf Hdjypjut

Condition: used, Year of construction: 2010, sheet width 3100 mm plate thickness 14.0 mm ST pre-bending 12.0 mm ST diameter of upper rolls ~ 290 mm side roll diameter ~ 210 mm diameter of lower rolls ~ 270 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 125 Liter voltage 380 V total power requirement 11.0 kW weight 9000 kg range L-W-H 4800 x 1900 x 1600 mm Very good condition (!!) Current new price including accessories approx. 110.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 4-roll bending machine * ??4-roll concept offers a wide range of bending and rounding options - MG NC control unit "ELAP LYNX" * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Freely movable control panel - Two central rolls are directly driven by hydraulic motors - Conical rolling is possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Pre-bending on both sides - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Permanent lubrication of all components Bearings Dusljwhqubon T Hypst - Sturdy welded steel construction - 2x bending speeds selectable - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2014, operating hours: 2,349 h, Empty weight: 15.135 kg Dimensions (LxBxH): 895 x 244 x 318 cm Serial number: 150 Condition undercarriage: 80% Dueljupf Eusn T Hypjt Komatsu GD555-5 Ex-Army Motor Grader, Made in Japan, E-rops cab with air conditioning, 6 cylinder turbocharged Komatsu SAA6D107E-1 engine with 196HP (146kW), Tier 3, 8F-4R automatic powershift transmission, 12ft (3.65 Mtr) moldboard with new cutting edge, hydr. tip control, centershift, differential unlock, accumulators, 14.00-24 tyres on average 80% remaining, 15,135 Kg operating weight, front and rear work lights, engine enclosures. Machine has low hours and is in very clean condition. Inspections are welcome. Ripper available at extra costs.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Technical details grinding length 600 mm grinding width 330 mm workpiece height - mm Control Siemens FM-NC grinding spindle drive 12,5 kW total power requirement 20 kVA weight of the machine ca. 5 t dimensions of the machine ca. 3200 x 2590 mm Additional information Precision, surface and profile grinding machine Equipment: CNC control Siemens FM-NC SIMATIC OP 27 Electronic hand-wheel Grinding wheel flange for planar contact Creep feed device Ball screw X-axis Dsln T Hyjwhvhajpjut Coolant system with paper belt filter, 180 liters, coolant pump 75 l/min. Oil mist extraction device, weight 55 kg Housing in stainless steel execution included, costs new as an machine option EUR 15.000,- Electromagnetic clamping plate 600 x 300 mm, height 81 mm, weight approx. 100 kg Separate control cabinet Machine documentation Technical data: Grinding area max. 600 x 330 mm [Working areas] X-axis 800 mm Y-axis 370 mm Z-axis 330 mm Distance table-spindle center 600 mm Table height 900 mm Table load 450 kg [Grinding wheel] Grinding wheel diameter 300 mm Max. width 50 mm Grinding wheel bore 76.2 mm Speed 100 - 4000 rpm. [Speeds] X-axis up to 35000 mm/min. X-axis 2-30000 mm/min. Space requirement length x width 3200 x 2590 mm Machine height 2850 mm Transport height 2350 mm Machine weight 5000 kg

Condition: good (used), Year of construction: 2012, turning diameter 320 mm turning length 750 mm control Heidenhain MANUALplus 620 Number of working hours 13000 h turning diameter over bed slide 150 mm cross movement 200 mm speeds V-konstant = 1-4000 U/min transmission ratio 2 spindle head Din 55022, Gr. 5 spindle bore 52 mm feeds cross mm/min. feed longitudinal - mm/min rapid travel - longitudinal/face 5/10 m/min thread pitch 0,01-999,9 mm Djln T Hysv Dmpzjpeut power feed longitudinal 7000 N tailstock quill taper MT 4 tailstock - quill stroke 140 mm turret (x-stations) 8 x 30 mm total power requirement 16 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,7 x 1,9 x 1,6 m Very well-preserved cycle lathe, made by DMT-Kern/ Germany, from the prototype workshop, with cycle control Heidenhain MANUALplus 620 HCSI, with 8-way tool changer WITH 8 driven tool positions and separate C-axis with brake, is activated when drilling/turning threads, holes with a bolt circle (off-center) or in milling operation. Prism/flat bed guide hardened and ground, slide guideways covered, digital servo motors lengthways and plane, protective cover and sliding door, combination operating station with optimalaccess to the work area and can be moved over the entire length of the machine. Sold due to free funds for the purchase of a new machine, delivery at the beginning of May 2025. Machine dealer with own stock of 1600 m².

Condition: new, The X.mill T series is the newest generation of our vertical machining centers, with modern high-performance compact CNC controls. Whether equipped with Siemens or Fanuc controls, this series offers an excellent price-performance ratio. Wide range of accessories for easy adaptation to meet your specific requirements. Using state-of-the-art FEM Analysis Software, we were able to achieve the highest machine frame rigidity in this machine class Deln T Hysuzk U Hspjut

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - BFU 980 /S/20+/8 Duolnewhzm Ue T Hypet - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C

Condition: used, Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface Delot D Hqnsn T Hypjut * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 2013, operating hours: 2,075 h, Empty weight: 15.135 kg Dimensions (LxBxH): 973 x 250 x 313 cm Serial number: 080 Condition undercarriage: 90% Komatsu GD555-5 Ex-Army Motor Grader, Made in Japan, E-rops cab with air conditioning, 6 cylinder turbocharged Komatsu SAA6D107E-1 engine with 196HP (146kW), Tier 3, 8F-4R automatic powershift transmission, 12ft (3.65 Mtr) moldboard with new cutting edge, rear ripper with full set of teeth, hydr. tip control, centershift, differential unlock, accumulators, 14.00-24 tyres on average 90% remaining, 15,135 Kg operating weight, front and rear work lights, engine enclosures. Machine has low hours and is in very clean condition. Inspections are welcome. Duolnjwhiwue T Hypet

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details turning diameter 320 mm turning length 810 mm control FANUC MSX-701 / MAPPS 3C total power requirement 89 kVA kW weight of the machine ca. 8,3 t Additional information CNC high-performance CNC turning and milling center The machine has been running with oil. Condition: Very well maintained, the machine has recently been checked by a service technician with geometry measurement. We can send you with WhatsApp videos of the machine check up of our service technican. The machine has received a new Mapps unit with the latest version Mapps 3C including USB connection. Costs approx. EUR 8-10,000 including installation. Equipment: CNC control FANUC MSX-701 / MAPPS 3C Bar loader LNS SPRINT 552-565 Collet chuck HAINBUCH SPAN-TOP 65 on main and sub-spindle Basic range of standard turning holders and driven holders Fire extinguishing system made by Siemens Chip conveyor Coolant system with high-pressure filter system Workpiece unloading device with gripper Tool pre-setting device on spindle 1 and 2 Technical data: Djlewhvdzjn T Hypjut Swing diameter over bed 800 mm Swing diameter over cross slide 800 mm Maximum turning diameter 320 mm (interference with turret cover) Standard turning diameter 200 mm Maximum distance between the centers 1130 mm Maximum turning length 810 mm Maximum workpiece size 300 mm Travels: X-axis turret 1 and 2 210/210 mm Y-axis 100 mm (+65/-45 mm) Z-axis turret 1 and 2 810/810 mm B-axis 920 mm (headstock 2) Main spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Sub-spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Feed drives: Rapid traverse turret 1 X/Y/Z 30/20/50 m/min. Rapid traverse turret 2 X/Z 30/50 m/min. Tool turret: Number of turrets 2 Number of tool stations per turret 16 Of which 16 prepared for driven tools Shaft cross-section for turning tools 20 x 20 mm Maximum shaft diameter for boring bars 32 mm Turret switching time (1 station) 0.18 s Maximum speed of the driven tools 6000 (12000) rpm Drive power for driven tools 7.5/5.5 kW (5 min/continuous operation) Dimensions, weights: Installation area without chip conveyor 3930 x 2721 mm Installation area with chip conveyor, ejection on the right 5120 x 2721 mm Total height (without automatic door) 2320 mm Net weight 8300 kg

Condition: like new (used), Functionality: fully functional, mileage: 569,000 km, first registration: 04/2015, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 18,000 kg, maximum load weight: 7,700 kg, empty load weight: 10,300 kg, fuel: diesel, wheelbase: 6,100 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,550 mm, loading space length: 8,650 mm, loading space height: 2,700 mm, Year of construction: 2015, Equipment: ABS, air conditioning, car registration, cruise control, differential lock, onboard computer, parking heater, sleeping cabin, spoiler, tail-lift, Body Dimensions 8.60m x 2.70m x 2.55m TAULINER BOX + 1,500kg DHOLLANDIA RETRACTABLE LIFT GATE. Dsln T Howifyzsypout Extras Climate Controlled Air Conditioning, Automatic Transmission, 3-Position Engine Brake, 1 Bunk Bed, Heater, Night-Time Air Conditioning in the Roof, Rear View Camera, Rear Air Suspension, Cruise Control, CD Radio, Crash Control, Lane Control, On-Board Computer, Electric Lifts, Central Locking...

Condition: new, The X.mill T series is the newest generation of our vertical machining centers, with modern high-performance compact CNC controls. Whether equipped with Siemens or Fanuc controls, this series offers an excellent price-performance ratio. Wide range of accessories for easy adaptation to meet your specific requirements. Using state-of-the-art FEM Analysis Software, we were able to achieve the highest machine frame rigidity in this machine class Djleq Rtrpsn T Hypsut

Condition: used, Year of construction: 2022, liter capacity 980 l Pressure of pump 8 / 80 bar total power requirement 16,7 kVA weight of the machine ca. 1,1 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BMF 980 L -4 - NEW, unused - universally applicable - can be controlled via contactors Djlowhzm Ion T Hypout - Number of pumps: 2 - Pump output: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 2.2 kW, 3,501 rpm, 6.9 m³/h, 115.0 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: new, pressure 150 t stroke 300 mm Dujln T Hjixm Agjypot table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Dolnswhv Rne T Hypeut

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 2000 mm y-travel 2300 mm z-travel 1000 mm Control Siemens 840 D total power requirement 153 kVA weight of the machine ca. 67,0 t dimensions of the machine ca. 9,0 x 7,5 x 5,1 m Additional information Used universal machining center for turning, drilling and milling. Large machine in portal design with fixed portal and movable base with integrated rotary table / turning station and pallet holder. New price EUR 1.327.160,- (without service) The machine can be demonstrated and tested under power/chip. Technical data: Control: Siemens 840 D Max. workpiece diameter: 2000 mm Distance spindle nose to pallet surface min. 150 / max. 1120 mm Pallet changer: 2-way pallet changer with set-up station, pallet buffer space and rotating pallet transfer station Pallet size Diameter 1250 x 200 mm and Diameter 1600 x 230 mm Pallet clamping surface designed with 12 star-shaped T-slots 22H9 Pallet center hole diameter 100 mm H6 Maximum permissible pallet load 3000 kg Rotating spindle speed range: 1 - 400 rpm Rotating spindle drive power: 70 kW Drilling and milling spindle: HV swivel head as B-axis by 90° freely programmable Water-cooled AC main drive as motor spindle Speed range of drilling and milling spindle: 1- 12000 rpm Drive power of drilling and milling spindle: 40 kW (S1-100%) Maximum spindle torque 137 Nm Hydraulic weight compensation for the spindle slide Spindle positioning per degree (M19) Main spindle bearing diameter 70 mm Cutting performance: Solid drilling diameter 50 mm in C45 Tapping M 42 in C45 Milling 400 cm³/min. in C45 Milling 3000 cm³/min. in aluminum Travel: X-axis: 2000 mm (cross slide travel) Y-axis: 2300 mm (longitudinal table travel) Z-axis: 1000 mm (spindle slide stroke) Carousel turning station with C-axis operation and holder for pallets with diameters of 1250 and 1600 mm Double main drive, each with an integrated water-cooled main drive motor and automatically switching gearbox with transmission ratio 1:4 Main drive 70 kW (S6-60%) Maximum speed 400 rpm. Maximum torque 25000 Nm Main bearing designed with 845 mm diameter axial bearing and 200 mm diameter radial bearing (2-way) Technical data C-axis drive: Number of positions 360,000 Measuring system directly via ROD Positioning accuracy +/- 0.001° Dslnjwhvape T Hypout Repeatability accuracy +/- 0.0005° Maximum speed 15 rpm

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: standard, construction height: 1,335 mm, fork length: 1,200 mm, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, net weight: 1,350 kg, High lift truck Load center: 600 Delnjqynq Rj T Hypout Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min Djln Tewhzmzs Hypjut

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Technical details x-travel 3500 mm y-travel 2200 mm z-travel 1200 mm Control Heidenhain iTNC 530 total power requirement 45 kW weight of the machine ca. 48 t Additional information The milling spindle was renewed / overhauled in November 2024. Operating hours 15918 Dueln T Hyjwhu S Ropet Travels: X/Y/Z 3500/2200/1200 mm Table clamping area 3000 x 2000 mm Rapid traverse X/Y/Z 30 m/min. Max. spindle speed 20000 rpm Tool holder HSK A 63 Power 30 kW Torque 80 Nm Equipment: Heidenhain iTNC 530 CNC control Universal milling head with B axis -110°/+110° and C axis -200°/+200° 32-ATC tool changer Coolant through spindle 24 BAR THREE-DIMENSIONAL PROBE HEIDENHAIN TS 460

Condition: used, Functionality: fully functional, Year of construction: 2021, operating hours: 980 h, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 1,464 mm, fuel type: electric, mast type: triplex, construction height: 2,004 mm, fork length: 1,150 mm, total length: 770 mm, drive type: Elektro, construction width: 760 mm, net weight: 1,050 kg, High lift truck Load center: 600 Mast type: Triplex Technical condition: very good Front tires type: Polyurethane Front tires Condition: 100% Dsln Tswh Dpxj Hypjut Rear tires Type: Polyurethane Rear tires Condition: 100% Description: Used machine reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). Pulse control, initial lift, CE certificate,

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar Duoln Towhzmhe Hypjt weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 1,110 h, load capacity: 1,400 kg, lifting height: 3,250 mm, free lift: 76 mm, fuel type: electric, mast type: standard, construction height: 2,170 mm, fork length: 1,150 mm, total length: 760 mm, drive type: Elektro, construction width: 770 mm, net weight: 1,200 kg, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Dsln T Hyst Expfepout Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 225Ah Battery year of manufacture: 2024 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). Pulse control, CE certificate,

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 3,310 h, load capacity: 1,200 kg, lifting height: 2,700 mm, free lift: 76 mm, fuel type: electric, mast type: standard, construction height: 1,843 mm, fork length: 1,150 mm, total length: 770 mm, drive type: Elektro, construction width: 760 mm, net weight: 1,000 kg, High lift truck Load center: 600 Duslsq Duxgsn T Hypjt Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 260Ah Battery year of manufacture: 2024 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). Pulse control, CE certificate,