Used Barford Sxr 5000 for sale (3,722)

Condition: ready for operation (used), Belt Conveyor Böhringer Brand: Böhringer *Br4: A-A length = 15000 mm, Beltwidth: 650 mm, Driving: 7,5 kW *Br5: A-A length = 22500 mm, Beltwidth: 1000 mm, Driving: 7,5 kW(=sold) Dobvavst U Uddji Uskl

Year of construction: 2018, operating hours: 7,062 h, Condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 3100 mm Measurements height 4900 mm Machine weight 50000 kg Control Unit Brand SIEMENS Model Simatic HMI Main Drive Pressing force 4500 kN Table Outer length 1000 mm Outer width 1800 mm This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours. Dsbjwgqauevavi Uokl Application Types Bending

Condition: used, Year of construction: 2013, Serial number: WSJPRS327DTJ2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19129 Specifications: - 3 axle - Lift on 1 - Suspension: Air Debjvgyxbsvavi Ujkl - 33 pallets - Meat hanger - Inside length: Approx. 13.3 m - Internal width: Approx. 2.5 m - Internal height: Approx. 2.85 m - Carrier cooling/freezer unit - Tires (see pictures) Description: Krone box semi with cooling/freezer unit. Meat hanger and 33 pallets. Ready for delivery. Technical approved: no EU-approved until: 16.06.2024 Own weight: 11995 Total Weight: 45000 Payload: 33005 Width: 260 Length: 1379

Condition: like new (used), GEA Westfalia CND 20-01-076 Bactofuge Make : GEA Westfalia Dkjbevzyyujvavi Uel Model : CND 20-01-076 Year of Manufacture: 1999 Capacity : 5000 L/h - 7500 L/H Usage : Bacteria Removal Separator Tools : Included Control Panel : Included Condition : Pre-owned/ Good

Condition: used, Year of construction: 2001, total height: 3,650 mm, installation height: 420 mm, overall weight: 25,000 kg, pressing force: 320 t, space requirement length: 4,400 mm, space requirement width: 2,600 mm, power: 80 kW (108.77 HP), controller manufacturer: SIEMENS, controller model: S7-400, lifting height: 200 mm, ram stroke: 200 mm, table length: 600 mm, tool height: 420 mm, CONTROLS .. PLC SIEMENS S7-400 SLIDE .. total force (nominal): 320 to .. stroke: 200 mm COUNTER RAM .. nominal force: 100 to V-RING .. nominal force: 63 to TOOL DIMENSIONS .. lower table (left-right): 600 mm .. lower table (front-back): 600 mm .. upper table (left-right): 600 mm .. upper table (front-back): 600 mm Dkebowf A Sgjvavi Ujl .. shut height max.: 420 mm .. distance between columns (H-frame): 700 mm STRIP-FEEDER .. feeder type: grip feeder ELECTRICAL SPECIFICATIONS .. total power consumption: 80 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4400 mm .. space requirements -front/back-: 2600 mm .. total height: 3650 mm .. total weight approx.: 25000 kg ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. closed cabin: yes .. decoiler: no .. leveller unit: no .. waste cutter: optional

Condition: new, Year of construction: 2006, SCM FS410 planer and thicknesser, in mint condition - never used, only test planed a few times! TERSA cutter block Working width: 410 mm Maximum planing height: 240 mm Total worktable length: 2050 mm Planer stop dimensions: 1100 x 170 mm Planer stop inclination: 45° Crebqewhrt Sexd Ddvob Cutter block speed: 5000 rpm Cutter block diameter: 120 mm Thickness feed rate: 6-12 m/min. Spiral steel feed roller Rubber feed roller Quick conversion system from planer to thicknesser in one go Mechanical digital display for thicknesser Glide rollers in the thicknessing table Motor power: 5.5 kW - Automatic motor brake Feed motor 0.55/0.75 kW Working height: 830 mm Extraction hood diameter for planer: 120 mm Extraction hood diameter for thicknesser: 120 mm Approx. weight: 700 kg Operating manual Dsbvowh Sw Rjavi Ujkl Price is net plus VAT

Condition: like new (used), Year of construction: 2023, operating hours: 150 h, Wood Granulation Unit Drying Capacity 1.5T.H - Granulation 1.0T.H *Sawdust Drying Unit including Fuel Hopper, Hot Air Firebox, Wet Sawdust Hopper, Screws & Conveyors, Cyclone, Dust Collector, Dkobvavjuyxxwei Uol Bucket Elevator, Dry Sawdust Storage Hopper, Chimney, 30kW 15000m3.h Fan *Granulation Unit including Control Screw, 2 75kW Vertical Axis Presses (one in operation, one on standby), Belt Conveyor, Screen Cooler, Bucket Elevator, Pellet Hopper, Cyclone, Dust Collector, 11kW Fan, Manual Bagging Machine, Pallet Wrapper, Spare Parts,... *8bar Compressor - Dryer - 500L Tank *Electrical Cabinet 630A 220kW with PLC, Variable Speed Drives, Starters .. *Visible in operation by appointment *Possibility of Dismantling and Assembly Service (not included in the price)

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1460 Measurements depth 2220 Measurements height 1700 Machine weight 3100 Main Drive Dkjbvavjwgp Udsi Usl Spindle speed range 6000 Spindle motor power 7.5/5.5 kW Number of axis 7 Movement X-Axis Movement 140 mm Y-Axis Movement 70 (+/-35) mm Z-Axis Movement 235 mm Tools Number of station 8 Media Chip conveyor Yes Additional Equipment Bar Loader: IEMCA BOSS 545 E This 7-axis Miyano BNA-42DHY turn-mill centre was manufactured in 2011. It features a main spindle with a maximum bar diameter of 42 mm and speeds up to 6000 rpm, complemented by a counter-spindle that handles up to 34 mm and 5000 rpm. Equipped with two turrets, upper with 8 positions and lower with 6, it offers versatile machining options. Includes a chips conveyor and an IEMCA BOSS 545 E bar loader. Contact us for more information about this machine. Application Types Turning

Condition: used, -Large planing tables made of gray cast iron -The planing table is adjusted using a precise parallelogram system, ensuring that the distance between the table tips and the cutter block remains constant in every adjustment position. -The large, sturdy planing stop made of anodized aluminum is easily movable and can be tilted from 0° to 45°. -The angle of the stop can be read from the workstation. -Comes with auxiliary stop as standard. -Large four-knife block with precision bearings. -Smooth operation thanks to the precision unit and the heavy-duty cast iron construction. -Powerful industrial motor. -Maximum user safety with simple operation. -Scale display for chip removal. -Manual table adjustment. -Motor protection switch. Equipment details. -Incl. Foldable auxiliary stop for narrow workpieces -Manual quick adjustment of the chip removal with scale & clamping head The guard -The guard is foldable and designed to not hinder the operator while working, while simultaneously protecting them. TERSA models with Tersa planer knife shaft system -No more adjustments or screwing -Planer knife changes in seconds -Self-locking -Extremely quiet -Perfect planing results Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Planer: - Total length of tables: 2720 mm - Work table length: 1498 mm - Maximum chip removal for planer: 8 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2750 mm - Space required (width/depth): 1604 mm - Explanation Space requirements: The dimensions take into account maximum travel distances or usable lengths. Electrical specifications: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 Dobju T Hrcjvavi Uokl - Planer block speed: 5000 rpm - Maximum planing width: 520 mm

Condition: used, Year of construction: 2001, Benhil 8358 & 8535 Butter Portion Packer with twin filling/ Format : 25 x 41 mm / Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute Benhil 8358 & 8535 Twin Filling Butter Portion Packer Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight Model : 8535 Location : In Stock Format: 25 x 41 mm ( 10g) Rectangular Filling: Twin Filling with volumetric Dosing for accuracy and compensation Product feed: Stainless steel Hopper with Screws Dsbvourulcoavi Ujkl Paper feed: On angle 90 deg for steady feeding Products: Butter , Lard, Yeast, Margarine, etc. Weight: 5000 kg Dimensions: 390 x 250 x 280 ( LxWxH) including Case Packer Benhil box packer make: Benhil Per box: 200 x 10g Mechanical Rotary box filling with portions

Condition: excellent (used), Year of construction: 2022, On behalf of a customer we offer a plasma cutting machine from Boschert - Ergocut 4020. It works perfectly and can be tested under power at any time. Technical data: Djbsu Rbqkevavi Uokl Processing table: 4000x2000mm LxW: 5000x3000mm Labold CNC control with 19" touchscreen CAD system (dxf/dwg/iges/cadl) incl. CNC CAD software Drilling and tapping unit ER25 chuck 200mm clearance between table and torch Moving suction unit (suction unit optional) Plasma source: Hi Focus 161i from Kjellberg 2 PerCut 211 plasma torch inserts Automatic gas mixing system Automatic height adjustment

Condition: used, mileage: 375,000 km, Year of construction: 2013, Serial number: YS2R6X4000208xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19513 Specifications: - 2013 model - Km: approx. 375,000 - Gear: Opticruise - Suspension: Steel - Tires (see pictures) - Euro 5 - Retarder - Length: 740 cm - Width 255 cm - Wheelbase: 330/135 cm - Weight: 14,250 kg - 6x4 - 500 hp - Tool cabinet - Trailer hitch - Lightbar - Refrigerator - 2x Bed - Radio/CD - Air conditioning/ac Description: Scania R500 tandem tipper truck from 2013. There is a leak in the tip cylinder. Dobvaovyfdijvi Uskl Can be delivered within a short time. Km: 375000 HK: 500 Technical approved: Yes EU-approved until: 28.09.2025 Own weight: 14250 Total Weight: 29500 Payload: 15175 Width: 255 Length: 740 Euro: 5

Condition: excellent (used), Year of construction: 1989, Planer and Thicknesser FS41 GEA – Casadei With slotted hole device, but missing collets The chassis is missing a drawbar Very stable, very good condition Dkjbswfflijvavi Ujl Year of manufacture 1989 Planer table: 2040 x 410 mm, thicknessing table: 700 x 410 mm 3 kW, shaft speed 5000 rpm Shaft diameter 120 mm, number of cutters 4, feed rate 8 – 14 m/min Maximum planing height 230 mm Weight 560 kg Table height adjustment, removable dust extractor hood New price was €8,800

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand OKUMA Model OSP P300MA Main Drive Spindle speed range 15000 Spindle motor power 18.5/26 kW Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 625 mm Workpiece Dksbvjuz Hq Dsavi Ujl Workpiece X 600 mm Workpiece Y 900 mm Table Table load 400 kg Tools Slots in storage 146 Additional Equipment Cooling through spindle 70 bar Probe Renishaw TS34 tool monitoring Chip conveyor Mayfran Consep 2000II 125HP 70 bar, 20 l/min Twin in-line cartridge filter Air blowing of tools TAS-S: Thermo Active dimension Stabilizer-Spindle TAS-C: Thermo Active dimension Stabilizer-Construction Servo Navi M OSP-P300M 3D kit & OSP suite This 4-axis Okuma MB-4000H horizontal machining center was manufactured in 2018. It features a 400 mm x 400 mm pallet, a spindle speed of 15,000 rpm, and a spindle power of 18.5/26 kW. The machine includes a high-capacity tool magazine with 146 Matrix positions and advanced TAS-S and TAS-C for dimensional stability. If you are looking to get high-quality milling capabilities, consider the Okuma MB-4000H machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, -Sturdy steel and gray cast iron construction -Large, ribbed gray cast iron planing tables -Smooth operation due to high weight -Four feed speeds -Motorized thicknessing table lift with two speeds and digital display -Articulated pressure bar in the infeed -Precision-mounted four-knife shaft -Helical-toothed steel feed roller for particularly even and gentle wood feed -Rubber-coated feed roller -Large planing stop, tiltable from 90 to +45° -Standard auxiliary stop -Powerful industrial motor -Pneumatic quick-change system with pneumatic raising and lowering of the planing table -The extraction connection position is always in the same place for both planing and thicknessing, eliminating the need for an additional extraction hose or the need for cumbersome reconnection and repositioning around the machine required Djbvasu T Hq Sevi Uskl Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Planer: - Total length of tables: 2300 mm - Work table length: 1200 mm - Planer table width: 520 mm - Working height: 930 mm - Max. chip removal for planer: 6 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45 ° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2300 mm - Space requirement width/depth: 1610 mm - Explanation of space requirement: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness: - Thickness table width: 520 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 250 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, machine/vehicle number: 5980, Year of construction: 2014, operating hours: 17,440 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: gas, mast type: standard, construction height: 3,010 mm, Equipment: cabin, sideshift, .: 5980 Equipment Details: Year of Manufacture: 2014 Load Capacity: 5000 kg Lift Height: 4100 mm Operating Hours Read: 17440 h Mast Type: Standard Mast Height: 3010 mm Dkobvavswh Trcji Uol Length/Width/Height: 3150 / 1550 / 2400 mm Operating Weight: 7085 kg ---- Equipment: * Protective Roof * 3rd Valve * 4th Valve * Windshield * Roof Cover * Front Work Lights * Rear Work Lights ---- Further Equipment Information: ---- The operating hours are generally read. We would be happy to offer you the appropriate transport. Another 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Also available for rent, of course! We'd be happy to buy your old one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. The device is sold in its current condition, not refurbished, at the dealer's store. All information is provided without guarantee, errors, and changes excepted.

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0040000963C, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 14 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 550 mm, tool mount: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 192 Nm, bar passage: 52 mm, total height: 1,850 mm, total length: 4,100 mm, total width: 2,600 mm, overall weight: 4,500 kg, controller manufacturer: Siemens, controller model: SINUMERIK 840D, distance between centers: 700 mm, operating hours of spindle: 6,230 h, Equipment: documentation/manual, rotational speed infinitely variable, Equipment highlights: - 12 driven tool stations - Counter spindle - Permanently integrated Y-axis - VDI30 tool holder - Tool package with rigid holders - Chip conveyor included - Control system: Siemens SINUMERIK 840D - Machine hours: 10,270 h - Spindle hours: 6,230 h Please note: The supplied chuck and tool holders do not correspond to the components currently installed or clamped on the machine. Technical Specifications: General: - Year of manufacture: 2014 - Max. connected load: 30 kVA - Mains voltage: 400 V, 50/60 Hz - Control voltage: 24 V - CE-certified Debvaswdyh Njvi Uskl Machining range: - Max. turning diameter: 500 mm - Max. turning diameter in the slide area: 290 mm - Max. turning length: 500 mm - Distance between centers: 700 mm Travel paths: - X-axis: 210 mm - Y-axis: ±40 mm - Z1-axis: 525 mm - Z3-axis: 550 mm Main spindle: - Max. speed: 6000 rpm - Power: 13 / 14 kW - Torque: up to 192 Nm - Spindle bore: 52 (67) mm - Spindle nose: FL 140h5 Counter spindle: - Maximum speed: 6000 rpm - Power: 12.6 / 16.2 kW - Spindle bore: 44.5 mm - Spindle nose: FL 140h5 - Spindle nose spacing: 780 mm - Max. workpiece weight (counter spindle): 80 kg Turret & Tools: - Tool holder: VDI30 - 12 tool positions (all driven) Driven tools: - Speed: 5000 rpm - Power: 4.18 kW - Torque: 20 Nm - Tool change time: 0.4 / 0.7 s Travel speeds & accuracy: - Rapid traverse X/Y/Z: 30 / 22.5 / 30 m/min - Resolution XYZ: 0.001 mm - Ball screws: 32x10 mm - Accuracy according to VDI/DGQ 3441: - X/Y/Z: 10 µm (new machine) - Z3: 16 µm (new machine) - Repeatability: 3 µm (new machine) Dimensions: - Transport dimensions (without chip conveyor): 3330 x 1946 x 1829 mm - Overall dimensions (including chip conveyor): 4066 x 2583 x 1829 mm

Condition: used, Functionality: fully functional, load capacity: 5,000 kg, Equipment: rotational speed infinitely variable, Used Esab welding roller/manipulator working good. 5000 kg. for each roller Dkobvswhiugsavi Ujl

Condition: new, mast type: telescope, Condition: New Year of manufacture: 2024 Warranty: 12-month Dieci manufacturer's warranty Engine: Perkins (AdBlue/DPF) Power: 100 kW = 135 HP Drive: 4x4 all-wheel drive Approval: 20 km/h Emission standard: (Stage V / Tier 4f) Drive: 4x4 all-wheel drive Maximum lifting capacity: 5000 kg Maximum lifting height: 24.1 m Weight: 18000 kg Overall length: 7.2 m Overall height: 3.03 m Overall width: 2.38 m Tires: 18 R 22.5" wheels Outriggers: Automatic, fully variable Equipment: • Anti-tip system with blocking of dangerous movements • Hydraulic connector for any accessories on the mast head • Attachment socket on the telescopic head • Soundproof, enclosed cabin with heating, ROPS – FOPS approved • Suspension-mounted Grammer seat with dual joystick, right joystick including travel motion selector (FNR) on the joystick • Rear and front axles with limited-slip differentials (45% limited slip) • Travel release between 0° - 360° with the uppercarriage rotated, with automatic travel alignment. • Hour meter • Boom vibration damping • Joystick capacitive sensor system & deadman's switch Dobvavijtu Evme Uskl • 4-1 joystick control (proportional control) • Radio remote control for work basket and lifting devices including end-of-stroke damping in the mast • Inch. Pedal for precise (oil distribution between driving and working movements) • Adjustable steering wheel • Work lights front and rear on the cab (LED) • 3 steering modes (2-wheel, 4-wheel & crab steering) • "Wheels in straight line" indicator light with automatic locking • Automatic slewing ring locking • Sunshade and LED step lighting • Rearview camera • Pallet fork including FEM fork carriage • 1.3m lattice boom with 2t winch, 4.20m swivel work basket • Various attachments available! _____ Leasing through leasing partners possible Rent-purchase option - Rent first, then buy (rental costs can be deducted from the subsequent purchase price) This offer is non-binding and subject to change. We would be happy to demonstrate the machine to you and provide you with a customized offer. The machine has a CE approval and all documents are available. No liability for input errors. Errors and prior sale excepted.

Condition: used, mileage: 67,000 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 09/2020, loading space length: 4,250 mm, loading space width: 2,080 mm, loading space height: 2,240 mm, loading space volume: 20 m³, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Mobile: WhatsApp Office: Email: Vehicle location: Geistenbecker Str. 125, 41199 Mönchengladbach . ZFA25000002P55083 Fiat Ducato van with LBW (750kg) Dhollandia 2.3 Multijet 140PS Well-maintained vehicle, first owner Navigation system Air conditioning Cruise control Rear camera LED daytime running lights 6-speed transmission 3-seater Radio/CD Bluetooth USB Electric windows Central locking + remote control Power steering ABS, ESP Electronic immobilizer On-board computer Comfortable driver's seat Euro 6, green sticker New TÜV/AU (German vehicle inspection) Payload approx. 900kg Total weight 3500kg Dsbvavju T U U Soi Uskl We always have around 30 vans: vans, vans, and tippers. Just call or drop by! Of course, you can have your car inspected on our lift by your own mechanic or our master mechanic. *We can obtain the transfer license plates for you. Favourable financing or leasing for up to 60 months, with results in 60 minutes. We are happy to accept your vehicle as a trade-in. A 12-24 month warranty is available. Subject to typos and prior sale. You can reach us Monday to Saturday from 9 a.m. to 8 p.m., and on Sundays by appointment.

Condition: used, -Sturdy steel and gray cast iron construction -Dynamically balanced milling unit anchored to the work table -Extremely robust construction -Smooth operation thanks to precision units and high dead weight -Comes with right-hand/left-hand rotation and electronic locking when changing direction as standard -Five speeds from 3000 - 10000 rpm -Speed changes are easily and conveniently performed from the machine side -Comes with an MK 4 interchangeable spindle system as standard -Large gray cast iron work table for lasting precision -Easy handling thanks to controls and a speed display on the front of the machine -Large milling stop with fine adjustment and aluminum stop jaws as standard -Stop adjustment via crank handle -Numerical display of the set spindle height, accurate to within a tenth -Powerful industrial motors Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Weight (net) approx.: 510 kg Extraction connection: - Number of extraction nozzles: 2 - Extraction nozzle diameter: 80 mm - Number of extraction nozzle stops: 1 - Extraction nozzle stop diameter: 120 mm Work table: - Work table length: 2500 mm - Work table width: 810 mm - Table height: 923 mm Installation information: - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions to the space required to determine the recommended free space for the machine. Features: - Router stop: Heavy-duty professional design with aluminum stop jaws and fine adjustment, adjustable from the front via a crank with a numeric digital display - Curved router guard - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Controls: manual height and tilt adjustment of the router unit - Position of control elements: on the machine body - Table design: table extension left and right and extendable workpiece support (total width 2500 mm) Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Router spindle: - Spindle tilt: -45 – +45 ° Dobvavieu T Hhko Uokl - Usable spindle length: 140 / 180 mm - Explanation of usable spindle length: for spindle diameter 30 – 35 / for spindle diameter 40 – 50 mm - Milling spindle stroke: 90 mm - Changeable spindle: MT 4 - Spindle speed(s): 3000/4500/6000/8000/10000 rpm Maximum milling tool diameter: - Maximum lowerable tool diameter: 320 x 60 mm - Maximum tool diameter for profile milling: 250 mm - Maximum tool diameter for tenon milling: 350 mm - Maximum tool diameter for form milling: 160 mm

Year of construction: 2018, Condition: ready for operation (used), General Data Measurements width 2000 mm Measurements depth 3600 mm Measurements height 1900 mm Machine weight 6600 kg Control Unit Brand SIEMENS Model 840 D SL Main Drive Spindle speed range 5000 rpm Spindle motor power 57 kW Number of axis 3 Turret Number of turrets 1 Tools Type of tool holder VDI 30 Additional Equipment Parts catcher for main counter spindle This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information. Application Types Dsbvavjwgp R Ssi Uekl Turning

Condition: used, mileage: 97,574 km, power: 112 kW (152.28 HP), first registration: 09/2016, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space width: 2,200 mm, loading space length: 5,510 mm, loading space height: 2,780 mm, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Electrically adjustable door mirrors - Electrically operated windows - Radio = More information = Technical information Number of cylinders: 4 Engine capacity: 4.500 cc Axle configuration Tyre profile: 40% Max. front axle load: 3600 kg Max. rear axle load: 5000 kg Measures Dimensions (LxW): 735 x 223 cm Weights Empty weight: 4.730 kg Carrying capacity: 3.570 kg GVW: 8.300 kg Interior Number of seats: 2 Maintenance APK (MOT): tested until 08/2025 Identification Dsbvowhm E Aoavi Uskl Registration number: 96-BHR-2 Serial number: XLRAEL1500L457482

Condition: used, Year of construction: 2022, Serial number: SA9CA3A55MH17xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 16636 Djbvavjvg Nk Tsi Uskl - 3 axle - Saf axles - Good tyres, see pictures - Air suspension - Hudr. Limbs - All lights work - Good with light all around - Tool cabinet - Length on plane approx. 750 cm - Total length hanger 1083 cm - Width 254 cm - Wheelbase 136/136 cm - Permitted total weight 25,000 kg - Ready for delivery According to the owner, this is very little used. Not aware of any known errors or deficiencies. Lots of light all around. Trailer has air suspension. Can be delivered round the clock. Technical approved: Yes EU-approved until: 23.01.2026 Own weight: 6425 Total Weight: 25000 Payload: 18575 Width: 254 Length: 1083

Year of construction: 2000, Condition: ready for operation (used), General Data Measurements width 5000 mm Measurements depth 4000 mm Measurements height 2000 mm Machine weight 8000 kg Control Unit Dkjbvjwfii Esavi Ujl Brand BOSCH Model TrumaGraph CC220 Main Drive Punching force 156 kN Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Y-Axis Rapid Traverse 40 m/min C-Axis Rapid Traverse 360°/s Workpiece Workpiece weight 150 kg Additional Equipment Tool cassettes Multitool tools 3 clamping claws Documentation This TRUMPF Trumatic 200 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 200 CNC punch press. Contact us for more information about this machine. Application Types Punching