Used Barford Sxr 5000 for sale (3,732)

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, SUNNEN cross sanding machine with automatic lifting device in very good condition TECHNICAL DETAILS Honing diameter manual stroke: 1.5 - 165 mm automatic stroke diameter: 1.5 - 101.6 mm Stroke length: 6 - 170 mm Stroke speed: 60 - 500 1/min Spindle speed: 200 - 3000 rpm Spindle drive motor: 4.1 kW MACHINE DETAILS Connected load: 10.5 kVA Machine weight: approx. 1 t Dimensions: 2.0 x 1.3 x 1.9 mm EQUIPMENT - two-stage grinding pressure (roughing & finishing in one cycle) - automatic grinding pressure regulation (SDR) - Automatic sanding strips - wear compensation - Filter system for honing oil cleaning - Zero cut-off or ASC Crebetuu Dpo Hcygbsb

Year of construction: 2007, operating hours: 18,204 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 200038, TECHNICAL DETAILS X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm B-axis: 360º B-axis step size: 0.001º CNC control: Mazatrol MATRIX NEXUS spindle speed: 18.000 rpm spindle drive power: 30 / 25 kW spindle torque: 259 / 191 Nm rapid traverse: 60 m/min number of pallets: 2 pallet dimensions: 500 x 500 mm Cjb Hcygslu E Icobsrb workpiece diameter: 800 mm workpiece height: 1.000 mm workpiece weight: 700 kg tool holder: SK-40 number of tools: 60 tool diameter: - with free neighbor places: 150 mm - with occupied neighbor places: 95 mm tool length: max. 420 mm tool weight: 12 kg MACHINE DETAILS hours under power: 80.452 h Spindle working time: 18.203 h Total power consumption: 65.7 kVA weight: 11.6 t Coolant supply through the spindle: 15 bar Tank capacity: 510 l EQUIPMENT - Equipment - Chip conveyor - signal lamp - High pressure pump - Work area light - Spindle active cooling unit

Condition: new, Year of construction: 2024, Functionality: fully functional, compressed air connection: 14 bar, pressure: 14 bar, total width: 1,310 mm, total height: 5,060 mm, overall weight: 944 kg, temperature: -20 °C, operating pressure: 14 bar, tank capacity: 5,000 l, pressure (max.): 14 bar, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. Csb Hcyger En Ttoborb The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Year of construction: 2023, Condition: new, Semi-automatic auger filler for 100-5000g. Suitable for dosing and filling powdery products. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres; filling weight: 10-5000g (change of dosing screws required); stainless steel version AISI 304; servo motor; packaging accuracy: 1-2% (depending on product and total weight); max. speed of the machine in neutral: 50/minute; current: 1.5kW, 3P, 380V; machine dimensions: L600xW800xH1000mm; weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainless steel pipe. The feed hopper holds 230 litres and is equipped with a vibration motor for uniform product flow. - Specifications screw conveyor: Conveying capacity depending on product: up to 3 m³/h; standard angle: 45° (can be customized 30-60°); pipe diameter: 141mm; power: 1P, 380V, 3kW; machine dimensions: size depends on the customized end system (hopper, conveying length and angle can be adjusted); weight: approx. 150kg. The drawing just shows the auger filler. Cjb Hogzp Ekscygberb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 1998, Technical details: closing pressure: 3500 kN Crob Hcygevta Ngobeb weight of the machine ca.: 25,5 t

Condition: as good as new (ex-display), operating hours: 50 h, There is a Kilia 325 liter cutter 5000 Express in the factory overhaul. New is : bottom plate main engine disk motor Electronic control cabinet Blade shaft Blade shaft bearing Disc shaft bearing Hydraulic cylinder Hydraulic unit Electronic control panel Ejector motor Ejector bearing Ejector bearing Feeder motor Feeder bearing All scrapers Csb Houni Spjcygbsrb 1st machine stainless steel 2. stainless steel bowl 3. protective device to prevent 4. infinitely variable cutter shaft drive (50-4000) 5. with reverse rotation (50-500), drive power 81 KW 6. infinitely variable bowl drive 7. maintenance-free cutterhead system 8. automatic central lubrication (ADS 100) 9. hydraulic noise protection cover 10. double-walled knife cover, stainless steel, hydraulic 11. hydraulic ejector 12. 8 or 6 blade set Knecht K24 13. electric blade shaft brake 14. electric thermometer and revolution counter with limit switch 15. hydraulic feeding system for 200 liter wagon 16. hydraulic knife clamping nut 17. knife balancing device, standard 18. vacuum preparation 19. vacuum pump 20. control panel with 10 inch touch panel and joy sticks 21. maintenance and inspection module 22. remote diagnosis via secure (encrypted) internet connection (broadband connection required) 23. separate stainless steel control cabinet (wall mounting) 24. drive power cutter 81 kW, 400 Volt, 50 Hz 25. drive power bowl 3 kW, 400 Volt, 50 H Example pictures

Year of construction: 2002, Condition: refurbished (used), Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act Dear Sir or Madam, we offer a 5000 liter double-walled storage tank for the storage of heating oil. Nominal capacity 5 cbm new color equipment paint RAL ; 7035 Material steel in steel, material S235JRG2 Documentation Manufacturer's certificate/ nameplate Crjbjh U Azvs Hcygbsb Piece 1 dipstick Piece 1 air vent Piece 1 filling nozzle Piece 1 new limit switch piece 1 new leak detection sight piece 1 ladder Piece 1 suction line tank dimensions approx. 2750 mm diameter approx. 1.600 mm Weight approx. 1200 kg Storage above ground Delivery time = 14 days With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1979, Condition: excellent (used), Functionality: fully functional, Fully operational and well maintained Complete with control cabinet, fences and hydraulic unit, valves etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery. Crob Hcygjg Ezxzebjb

Condition: new, Year of construction: 2024, Functionality: fully functional, compressed air connection: 11 bar, pressure: 11 bar, total width: 1,310 mm, total height: 5,060 mm, overall weight: 794 kg, temperature: -20 °C, operating pressure: 11 bar, tank capacity: 5,000 l, pressure (max.): 11 bar, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. Crsb Hcyor En Taogbsb We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: good (used), Year of construction: 2008, feed length X-axis: 50,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, Unisign Univers 6 - 5000, Year of manufacture 2008, Siemens 840 D control system, Travel X/Y/Z 5000/800/600 mm, tool changer 52 times, SK 50 holder, drive power 26 KW, Long machining or pendulum machining, 5-sided machining with interchangeable angle head, Csb Hcyeup D Axjgberb

Condition: used, Year of construction: 2022, Disc section 510 mm serrated Hydr. working depth adjustment Disc section hydr. / working depth adjustment of the leveling unit C-Mix-Ultra tines for Ceus 50 / hydr. working depth adjustment Tine section with hydr. drawbar HD SCHAR 80 mm / (14/K1) Csb Hcjtz Tplsygborb

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, CMT welding machine Fronius; TransPuls Synergic 5000; CMT; MIG/MAG and electrode welding; according to a specialist, TIG welding would also be possible after a conversion or activation of specialist personnel inside the machine; wire feed: VR 7000 CMT; 5m intermediate package; if interested, an inspection and testing of the machine is possible and desired by appointment; further questions will be answered by e-mail; errors excepted Ceb Hcsr H D Ugoygbjrb

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers Ceb Hcyged Eaaaoborb - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: new, Year of construction: 2024, Functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Load capacity: 400 kg Cjbouvigps Hcygbsrb Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Condition: new, Year of construction: 2024, Functionality: fully functional, compressed air connection: 8 bar, pressure: 8 bar, total width: 1,310 mm, total height: 5,060 mm, overall weight: 649 kg, temperature: -20 °C, operating pressure: 8 bar, tank capacity: 5,000 l, pressure (max.): 8 bar, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. Ceb Hcygor En S Debsrb We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: good (used), MARK ANDY XP 5000 / 13"  Year: 2008  Webwidth: 330mm / 13" Cob Hcjtubz Aeygbsrb Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER  Web edge Control  Control Panel  Optican for Sheeter  Lot off Printing/Magnetic Cylinder  Anilox

Condition: used, Year of construction: 2003, Wedge ring roller front serrated disks (new) / Creb Hcotqd Tleygbeb

Condition: new, Year of construction: 2021, Functionality: fully functional, With the VITAPOINT 5000 air purifier, harmful substances are almost completely filtered over an area of up to 180 m² and the air quality is significantly improved, especially in heavily frequented or polluted rooms. The air purifier quietly extracts the polluted air near the floor and cleans it using two filter stages (G4 + H14 HEPA). The hygienically clean air is then fed back into the room via a ventilation grille at the top of the system. The separated particles remain in the filters and are disposed of with them. Cjb Hjubuvrscygborb

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 105 mm, turning diameter: 900 mm, turning diameter over bed slide: 900 mm, turning diameter over top slide: 570 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, spindle mount: MK 6, The PORĘBA TR-90B/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 5000 mm - turning diameter over bed: 900 mm - turning diameter over support: 570 mm - turning diameter in bridge recess: 1150 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 Cobsnnz Sxo Hcygbsrb - engine power: 27/41 kW - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Year of construction: 2022, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: 1793, NEW MOTORIZED PORTAL CRANE, MFG 2022, brand COMEGE PORTMOT 5000/7/, produced in Romania with French components, load capacity 5,000 kg, max load: 5,000 kg; frame 7000 x 5250 mm; hoist stroke between poles: 6000 mm; height to the transverse beam: 4800 mm; chain hoist; motorized travel; own weight without accessories: 1600 kg; 2 fixed motorized wheels; 2 rotating wheels; obstacle detectors mounted in each corner; excellent optical and technical condition. Crjb Houm Hhlscygbeb Many manufacturers already have this type of product, but it stands out for its ability to move a load of up to 5 To, controlled by a radio control by rolling and rotating in all directions directly on the ground. In fact, no railway or civil engineering is required for its use. The motorized gantry also gives you the ability to move a load from one workshop to another. Safety is ensured thanks to the 4 full stop detectors. The portal allows rotation on its own due to the inversion of the motors and the collector connected to the electrical source offers the user the possibility to do 360°. For Romanian companies, there is the possibility of leasing. Price Euro 33,900 Euro + VAT, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Working area: 3,000 x 1,500 mm Control system: Siemens MACHINE DETAILS Machine weight: approx. 17,500 kg Creb Hcsvi Iw Rsygbob EQUIPMENT - Scraper alternating position control - Thread forming - Marking - fast beading - Slotting - Multishear - Multibend - Offset resetting - Roller tools - Set-up cassettes - Ball transfer table

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Crob Hetubz Uocygbeb Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: used, mileage: 78,850 km, power: 100 kW (135.96 HP), first registration: 03/2000, overall weight: 10,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 5,000 kg, empty load weight: 5,000 kg, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 4 m³, Year of construction: 1999, operating hours: 12,913 h, Equipment: additional headlights, hydraulics, Working machine: - Aebi Crsb Hcygsqxt Exobob - Hochdorf MFH 5000 - Iveco diesel engine, 3907ccm; 100kw - to. GG: 10.000kg - 78.850Km; 12.913 operating hours - Roof hatch - Central lubrication - Front brush arm - Hydraulics / water pump removed - Suction / brush removed - Spare parts carrier (drives, brakes and tilts) - Rear tipper - Hydrostat Vmax 45km/h You can find a video of this offer on You can find our entire vehicle fleet at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: reconditioned (used), Year of construction: 2006, High-speed planer. After full maintenance. Model-Hydromat 5000 Year of manufacture-2006 №36650-280 Feed speed-6-200 m/min. Electric motor-30 kW. Cobjh Txd Ij Hcygborb Working width-400 mm. Machining height-150 mm. Spindle arrangement: 1) Lower-37 kW 2) Upper-45 kW 3) Right-30 kW 4) Left -30 kW Table lubrication automatic All heads included Diameter of spindles - 50 mm.

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 12,900 kg, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 12900 kg Creb Hcoi Apiljygbob Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post