Used Ciata T1000/Dp for sale (3,244)

Year of construction: 2018, Condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Cjbvcyljuk I Etskorb

Year of construction: 2007, Condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. Crebvcyed Nkpyslkjb This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders.

Year of construction: 1998, Condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high pressure pump unit Hammelmann HDP 122 on base frame without engine. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 530 bar Delivery rate: 55 l/min. Drive speed: 1500 rpm. Driving power: 55 kW without motor, with pressure control valve, with safety valve, with oil cooling system. Cjbvcsgz H Aksylkjrb Dimensions LxWxH: approx. 2000x1000x1400 mm weight: approx. 300 kg year of construction: 1998 Condition: in good used condition.

Condition: used, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, first registration: 09/2024, loading space length: 1,600 mm, emission class: euro6, number of seats: 5, Year of construction: 2024, DEK:[8254382] - New Pick-Up READY FOR DELIVERY Ford Ranger Double Cab 5 seats 4WD, - Engine: 2.0 EcoBlue 170cv Euro 6d, 6-speed gearbox, removable tow hook - Maximum length of cargo compartment 1,600 mm with load securing hooks Total weight 31.90 q.li - Useful load capacity 10.00 q.li, Towing capacity 34.50 q.li XL trim, equipped with: Climate, SYNC 4 Touchscreen with Bluetooth, Apple Carplay and Android Auto, Rear sensors and parking camera, Anti-collision braking, Lane keeping assistance, Road sign detection, Cruise control, ABS, EBD, HLA, TCS, etc. - Official Ford warranty 24 months. _____ CARLO MAURI S.r.l. - Tel. 031.699.049 - Sellers: Emanuele, Luca, Giuseppe. - Lurago d'erba (Prov. Como) Lombardy opening hours: Monday to Friday: 8.30 / 12.15 - 14.00 / 19.00 Saturday: 8.30 / 12.00 - 14.00 / 17.30 - Possible road test by appointment. - Possibility of personalized financing. Carlo Mauri Srl declines all responsibility for any involuntary inconsistencies present in the advertisement which does not represent any contractual commitment, Crjbvcevibtreylkob

Condition: new, Year of construction: 2025, Functionality: fully functional, Double-sided opening cabin allows for sandblasting of large-size elements (e.g. engine block, motorcycle frame) without the need to rotate the object. Dust-free operation of the device is ensured by the use of peripheral seals, which allows the work to be performed in an environmentally friendly manner. The sandblasting hose is located at the bottom of the collecting container. The drain hole allows for a quick change of sandblasting material. The sandblaster is used for cleaning and treating various types of surfaces, e.g. removing rust, paints, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The abrasive can be, among others, quartz , silicon, glass beads, plastic sand, emery and other materials. TWO SEPARATE PRESSURE REGULATORS FOR EACH WORK STATION TWO CYCLONE EXTRACTIONS WITH DUST FILTERS ENSURING DUST-FREE WORKING Technical parameters Internal dimensions of the cabin 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x1880 mm Working pressure 4 - 8 bar Capacity 1,200 L Abrasive (abrasive) corundum, glass abrasive, and sand Weight 196 kg Cjbvcylsv Aad Aokjrb Standard equipment 8 ceramic nozzles 15 removable visor films 2 industrial pistols 2 pairs of work gloves 2 cyclones 2 pressure regulators 2 foot controls Manufacturer: Cormak

Condition: used, mileage: 152,969 km, power: 208 kW (282.80 HP), first registration: 09/1988, overall weight: 25,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 02/2026, gearing type: mechanical, total width: 2,500 mm, total height: 3,500 mm, Leaf spring suspension Dimensions and weights: Crebvcylevzv E Tekeb Total weight: 25,000 kg / 25,000 kg Empty weight: 13,600 kg Payload: 11,400 kg Total dimensions (LxWxH): 8700 x 2500 x 3500 mm Wheelbase: 3700 - 1320 mm Tank volume [m3]: 10 m3 Attachment: Concrete mixer with conveyor belt PD-01 Cabin equipment: 2 seats, mechanically opening sunroof, windows open mechanically, radio, analog tachograph Exterior: Sun visor, Warning lights (rotating lights): 2 x

Year of construction: 2012, Condition: ready for operation (used), Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible. Crjbvcsqygxmoylkjb

Year of construction: 2007, Condition: reconditioned (used), We have a SIGMA pick & place feeder available. Year 2007. The state of the feeder is exceptional. Not used very often. This feeder was installed on a Buhrs poly wrapping machine but can also be installed on other mechanical machines. Is meant for feeding plastic card and difficult inserts. The position of feeder is very precise with these type of feeders. Cjbvcod Nkp Aoylkorb

Year of construction: 2020, Condition: new, MDPE-1 SPOT WELDER portable 1 kVA High-performance transformer 2 levels of power regulation Electronic current and time control Csbvsf Eyvvocylkjrb Possibility to work with 230V power supply The range of welded sheets: to 1 + 1 mm Width: 110mm Length: 460mm Height: 300mm Weight: 12,5kg Power supply: 230V

Condition: new, Year of construction: 2025, Technical data: Control system: multi-axis real-time interpolator, with active trajectory prediction. LAN communication, EtherCat, sampling time below 1ms correction map, RTCP, remote service access Working area: 1500 – 3000 x 2100 – 12000 mm Z axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X, Y helical strips hardened ground in accuracy class 6, Z axis ball screw in accuracy class 5 Linear bearing: Bosch Rexroth 35 Travel speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Program resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gate drive: double-sided master/slave with gate angle correction Electric spindle: 8 kW to 36 kW Printing heads: G.12 with a capacity of up to 12 kg/h G.20 with a capacity of up to 20 kg/h G.50 with a capacity of up to 50 kg/h Crjbetz Sgievcylkeb G.200 with a capacity of up to 200 kg/h Maximum electrospindle speed: 24,000 rpm (option 6000, 40,000 50,000) Construction: welded steel, ribbed, stress-relieved, precisely machined Table type: vacuum, hybrid, T-slotted steel, t-slot aluminum, aluminum vacuum with M16 or M18 holes Possible additional options: - tool cooling - linear or revolver tool magazine - rotary axis on the table - laser scanner - positioning bases - oscillating unit - 5-axis software 3D printers for granulate can handle a variety of plastics, such as PLA, ABS, PETG, polyamides or polypropylene. #plotter #CNC #milling machine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Pywood #plytawiorowa #Chipboard #steel #aluminium #aluminum #brass #stainless steel #cast iron #polypropylene #polycarbonate #acrylic #fermacell

Condition: good (used), Year of construction: 2003, For Sale: 4-Color Pad Printing Machine + Consumables & Exposure Case 4-color Automation (GO Automation) pad printing machine, used but fully functional, ideal for high-volume printing on various objects. Included in the lot: ✅ 4-color pad printing machine – digital control, programmable settings, conveyor optimized for series production. ✅ Stock of consumables: inks, cleaning products, pad printing plates. ✅ Exposure case for screen preparation. ⚠ Pads and ink cups not included. Key details: • Condition: Used but functional. Never used by us, but the previous owner confirmed it was working perfectly. • Test before purchase: You can test the machine on-site. Crebvcysvvhgrjlkjb • Transport: Heavy machine, but fits in a standard van. Applications: ✔ Customization of promotional items (pens, lighters, keychains, etc.) ✔ Printing on non-flat and irregular surfaces ✔ Series production in pad printing Perfect for a customization workshop, this machine is ready to use with everything needed to start production (except for pads and ink cups). Photos and additional information available upon request.

Condition: new, pressure 220 t chamfer lenght 3100 mm distance between columns 2600 mm dayligth 550 mm throat 410 mm stroke 275 mm working feed 10,0 mm/sec return speed 185 mm/sec quantity of oil 300 l Control DELEM DA 66T total power requirement 18,5 kW weight of the machine ca. 11286 kg dimensions 4550 x 2250 x 2850 mm HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection ----- ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 Cebvcyju N Ivwslkerb - split deer foot upper tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH/HOERBIGER hydr. components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC) - 2 front support arms with SLIDING system (slide bearing) - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes Special equipment included: - electric central lubrication

Condition: new, Year of construction: 2025, A 220-liter top-loading sandblaster with telescopic cylinders is a device for sandblasting and cleaning surfaces from rust, paint, greasy deposits and other impurities. The top opening significantly improves the ergonomics of working with heavy details. It is standardly equipped with a set of nozzles, a gun and glass protection stickers. A sandblaster is an essential tool in the metal, automotive, construction and shipbuilding industries. Thanks to its capacity and the stream of sand to the type of surface, the sandblaster ensures quick and effective cleaning of surfaces. The KDP220TOP sandblaster is a top quality product. It provides users with long and reliable work, and what is more, it enables quick and effective cleaning of surfaces of various types of elements. Equipped with an upper opening on telescopic actuators, it significantly improves work ergonomics and makes it easier to load heavy elements, and the capacity of 220 liters enables effective cleaning of larger surfaces in a short time. Advantages of our sandblaster model Complete for immediate use Convenient sandblasting gun with 4 replaceable ceramic nozzles Large, stable front door with rubber seal around the perimeter for safe and dust-free operation Telescopic actuators for increased work comfort High-quality rubber gloves integrated with the device Vent connection Crobvovzqf Uscylkeb Efficient lighting of the workspace 4 pieces of replaceable protective film for the window, visor Sand blasting hose placed at the bottom of the collection container Adapted to work with various abrasives Drain hole allows for quick change of blasting material Ease of use, reliability and work safety Technical parameters Technical parameters of KDP220TOP AIR REQUIREMENTS 400-700 L/min ALLOWABLE PRESSURE 8 BAR AIR CONNECTION 1/4" quick connector ABRASIVE TANK CAPACITY +/- 18kg SUCTION CONNECTION (venting) 63mm VIEWFINDER AREA 540x250mm FRONT HEIGHT 370mm INTERIOR CABIN DIMENSIONS (LxWxH min-max) 840x550x370-550mm EXTERNAL DIMENSIONS OF THE CABIN (LxWxH min-max) 890x560x1118-1380 mm WEIGHT 49kg Technical parameters Technical parameters of the extraction unit MODEL DC23 TENSION 220V POWER 1200W UNDERPRESSURE >12Kpa INPUT DIAMETER 45mm CAPACITY ~16l Standard equipment Work area lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality rubber work gloves, integrated with the device 2 suction (venting) connections with a diameter of 63 mm and 90 mm, enabling the connection of a suction device Sandblasting gun with 4 replaceable ceramic nozzles in sizes: 4, 5, 6, 7 mm 4 pcs. of replaceable protective film for window, visor Upper door with rubber seals around the perimeter to ensure dust-free operation Stable grid on the processing field Instructions in Polish Dust Extractor DC23 Connecting hose approx. 2m Bag filter We kindly inform you that the device requires self-assembly. Manufacturer: Cormak

Condition: excellent (used), Year of construction: 2009, PRATTO Mesh Welding line for 3D fence panels (and light mesh for construction use) Cobvcyeudipfjlkorb Model Starweld POB-36-2100; production of mesh panels and 3D/bent mesh panels; mesh width: 2100mm; wire dia. longitudinal + cross wires: 3-6mm; line wire spacing min.: 50mm; cross wire spacing min.: 25mm; SPM: up to 140; 5 x 250 KVA transformers; max. number line wires: 42 with 50mm wire spacing; max. length of panels: 6000mm (20′); line consists of: payoff system; straightening-propulsion for longitudinal wires; loop LAR; powered straightening; cross wire payoff unit; cross wire loop; auto cross wire feed; welder; mesh trimming shear; mesh bending press; mesh ejection + stacking-turner; exit rolls

Condition: used, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor -Load capacity: 1000 kg -Platforms: 2420 x 710 mm -Dimension retracted: height 230 mm Cobvsu H R Dljcylkjrb -Extended dimensions: height 1100 mm -Rollers: diameter 40 x 495 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Weight: 360 kg

Condition: used, Year of construction: 1997, sheet width 1015 mm Crobvcjuiz Iwsylkeb plate length 1015 mm plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm

Condition: used, fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor, fiber optic amplifier Crebsuz Iaasvcylksb -Manufacturer: ifm, efector200 photoelectric sensor fiber optic amplifier OVP -Type: OU5002 OUF-DPKG -Dimensions box: 150/125/H30 mm -Weight: 0.1 kg

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm working width 1070 mm pressing speed 5,0 mm/sec feed speeds 9,0 mm/sec return speed 10,0 mm/sec total power requirement 11,0 kW weight of the machine ca. 1,87 t dimensions of the machine ca. 2,2 x 1,3 x 2,3 m - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge Csbvcsrz Ttvsylkerb

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm dayligth 550 mm throat 410 mm stroke 275 mm working feed 10,0 mm/sec return speed 185 mm/sec quantity of oil 300 l Control DELEM DA 66T total power requirement 18,5 kW weight of the machine ca. 13900 kg dimensions 5150 x 2250 x 3000 mm Crjbjmyg E Usvcylkjb HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection ----- ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH/HOERBIGER hydr. components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC) - 2 front support arms with SLIDING system (slide bearing) - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes Special equipment included: - electric central lubrication

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm working width 1070 mm pressing speed 5,0 mm/sec feed speeds 9,0 mm/sec return speed 10,0 mm/sec total power requirement 11,0 kW weight of the machine ca. 1,87 t dimensions of the machine ca. 2,2 x 1,3 x 2,3 m - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge Cebvcyogvqr Uolkerb

Condition: new, pressure 30 t stroke 200 mm Crobsgvqruevcylksb table surface area 775 x 190 mm working width 775 mm pressing speed 5,0 mm/sec feed speeds 7,5 mm/sec return speed 10,0 mm/sec total power requirement 3,0 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m - hydraulic workshop press - table height adjustment - V-block tool insert - pressure display manometer

Condition: new, pressure 80 t stroke 250 mm table surface area 1040 x 260 mm working width 1040 mm pressing speed 5,0 mm/sec feed speeds 8,0 mm/sec return speed 10,0 mm/sec total power requirement 5,5 kW weight of the machine ca. 0,84 t Cobvcyjgvqr Aelkerb dimensions of the machine ca. 1,81 x 0,7 x 2,1 m - hydraulic workshop press - Table height adjustment - V-block tool insert - Pressure gauge

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm working width 1070 mm Csbvcyogvqr Hslksrb pressing speed 5,0 mm/sec feed speeds 8,0 mm/sec return speed 10,0 mm/sec total power requirement 5,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,05 x 1,0 x 2,2 m

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm working width 1070 mm Cjbvcylegvqr Rokorb pressing speed 5,0 mm/sec feed speeds 8,0 mm/sec return speed 10,0 mm/sec total power requirement 5,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,05 x 1,0 x 2,2 m

Condition: new, pressure 60 t stroke 250 mm table surface area 1040 x 370 mm working width 1040 mm pressing speed 4,0 mm/sec feed speeds 8,0 mm/sec return speed 10,0 mm/sec total power requirement 4,0 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,7 x 0,7 x 2,1 m - hydraulic workshop press - Table height adjustment Crsbvogvqrxocylkeb - V-block tool insert - Pressure gauge