Used Pegas Gonda 850X1000 Golem for sale (24)

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device Dkodpexz Dqmofx Af Deh • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS Dedpfx Afox A H T Ho Dskh total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: used, Year of construction: 2006, saw band length: 8,220 mm, total height: 2,730 mm, total length: 2,050 mm, total width: 4,020 mm, cutting speed: 18,000 mm/min, cutting range round steel at 90°: 650 mm, cutting width (max.): 750 mm, saw drive: 7,000 W, empty load weight: 6,750 kg, Design: The saw frame is a welded structure guided by two columns with preloaded linear bearings. The rigid saw frame minimizes vibrations and enables the machine to achieve maximum cutting performance. The vise, which clamps the workpiece, is designed as a casting. The vise jaw movement is controlled by a long-stroke hydraulic cylinder. A roller conveyor runs through the entire saw, supporting the workpiece along the full length of the cut. The saw is equipped as standard with hydraulic band tensioning, adjustable guides with carbide inserts, and top band guidance using a hardened ring on a needle bearing. An electrically driven brush ensures perfect cleaning of the saw blade. The drive is transmitted via a bevel-helical gearbox and a three-phase electric motor with stepless adjustment of the blade's peripheral speed using a frequency inverter. The cooling system delivers coolant directly to the blade guides. All machine movements are controlled by a hydraulic power unit, which includes control valves for adjusting the vise pressure. The saw arm uses limit switches to set the upper and lower positions during cutting. Dsdpfx Aex Hkmzof Djkh

Condition: good (used), Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts Dsdpfx Ajcqp Hhof Dokh -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

Condition: used, color: other, emission class: euro1, Part suitable for: trucks Price: On request VAT/differential taxation: VAT deductible = Company information = For further information, you can reach us on working days from 8:30 a.m. to 5:00 p.m. and on Saturdays from 10:00 a.m. to 3:00 p.m. via telephone number. Dodpfx Asxr D N Djf Djkh You can also email us at: See you soon!

Condition: used, functionality: fully functional, input voltage: 400 V, cutting width (max.): 14 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,200 mm, input frequency: 50 Hz, cutting height (max.): 250 mm, space requirement height: 1,200 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Bread Slicing Machine Treif Model: Pegasus Stainless steel construction Manual operation Dkodovkn E Dopfx Af Doh Slice thickness: 4 - 14mm Slicing machine Connection: 400V, 16A-CEE plug Dimensions approx.: 1000 x 700 x 1200 mm (W x D x H) Used machine We have many bread slicers in stock!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 5220511, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, workpiece weight (max.): 8,000 kg, TECHNICAL DETAILS Travel X-axis: 2,600 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Max. workpiece weight: 8,000 kg Table size: 3,600 x 900 mm Number of T-slots: 6 T-slot width: 22 mm T-slot spacing: 125 mm Spindle taper: ISO 50 DIN 69871 Spindle speed: 4,000 rpm (2 ranges: 0 - 1,000 rpm) Dsdpfx Afoygxgzo Dokh Feed rate: 10 - 5,000 mm/min Rapid traverse: 10,000 / 10,000 / 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Space requirement: approx. 9.82 x 5.1 x 3.16 m Machine weight: approx. 21.5 t Motor Spindle drive motor: 29 kW Feed drive motor (Y-axis): 20 Nm Feed drive motor (X and Z-axis): 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW EQUIPMENT Tool changer Both head joints have 2.5°

Condition: new, Electrical voltage 400 / 440 V Djdpfx Asd R Uzzsf Dekh Frequency 50 / 60 Hz N° Phases 3 / 3 Ph

Condition: new, A mobile workstation with fast,individual height adjustment. About onePedal is operated the hydraulic unit,this is a stepless adaptation to thedesired working height the base frame can be differentWorktops are placed. Theseare fixed with 4 socket lift table has a steel worktop and willdelivered with 4 swivel castors, 2 of them are withParking hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 970 x 590 mmTotal height: 1010 mmWeight: 135 kgRahmen: 970 x 590 mmGes. height: 1010 mmweight: 85 kg Dkedovwf Rqspfx Af Deh

Condition: new, 85 kg Dodpfx Ajxfwdnof Djkh

Condition: good (used), Year of construction: 2009, Pietroberto Spiral Mixer - model Pegaso 340 - used - year of manufacture: 2009 - capacity approx. 220 kg dough - 3 removable bowls - electronic controls - 2 speeds - good technical condition - machine from ongoing production Dkjdpeyaqmyefx Af Deh - price on request

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Condition: New machine Technical condition: New Dkodjw Eqdkopfx Af Doh Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Dsdew Eqdqspfx Af Djkh Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotatable Telehandler Mast Type: Telescopic Technical Condition: New Front Tires Type: Pneumatic Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Description: The vehicle is UVV-tested. Djdjw Eqdwopfx Af Dskh A&M pallet fork carrier set includes 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd valve, 4th valve, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, PEGASUS 60.30 St.V TÜV/Dekra approval, 20 km/h axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED headlights on the rigid boom, 7-pin socket on the upper carriage, car radio pre-installation kit with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated front-wheel drive and electrical pre-installation for 3-motion equipment, wheel set with 18R22.5XF MICHELIN off-road tires, semi-automatic air conditioning, removable windshield protection for the cab, kit for driving with 180° upper carriage rotation, boom vibration damping, integrated rear view camera with 7-display (not compatible with 7-monitor with digital camera on the telescopic boom). Telematics kit (DTS) Road lights (front) with LED daytime running lights Cabin with laminated glass windscreen, pre-installation for saw Woodcracker Three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg Pallet fork carrier plate including load hook A&M, width 1, chain forks FEM4A, tines: 150x50, length 1.2 m, load capacity

Condition: used, Year of construction: 2004, functionality: fully functional, D&K Pegasus Semi Automated Laminator with format B2 Feeder. Removed from printshop sold Ex works. Sold Ex works Have powered up machine and rollers heat up and belts turn over. Collection Tadley near reading UK The D&K Pegasus is an entry-level thermal laminating machine designed for low- to medium-volume production. When equipped with an automatic feeder, it transitions from a manual-load system to a more efficient, automated workflow. Machine Specifications (D&K Pegasus) Format Size: Designed for prints up to B2 size. Maximum Sheet Size: Typically 540 x 740 mm (varies slightly by regional configuration). Operation: Features a belt-driven in-feed and an integral burster (sheet separator) for one-man operation. Applications: Ideal for thin, economic laminates and single-sided thermal lamination. Feeder Options Dodox Nrf Rjpfx Af Dekh The Pegasus can be fitted with several feeder types to increase productivity, often retrofittable as your volume grows. Accufeed A2 (Common Entry Feeder): Max Sheet Size: 450 x 650 mm. Min Sheet Size: 90 x 60 mm. Min Stock Weight: 70 gsm. Features: Low-cost, efficient, and comes with a supplied compressor. Accufeed 760 / 1020 (High-End Feeders): Accufeed 760: Max sheet size 685 x 760 mm. Accufeed 1020: Max sheet size 685 x 1020 mm. Technology: Uses an Accufeed Belt Stream System and integrated vacuum pump for accurate high-speed feeding. Key Benefits of the Full System One-Man Operation: The combination of an automatic suction feeder and the integral separator allows one operator to manage the entire lamination process. Productivity: Automatic feeding removes the bottleneck of manual hand-feeding, significantly increasing sheets-per-hour. Versatility: Suitable for various digital and offset stocks with adjustable temperature controls.

Condition: good (used), fuel type: diesel, color: yellow, lifting height: 15,000 mm, axle configuration: 4x4, Year of construction: 2011, operating hours: 2,864 h, Equipment: all wheel drive, Drive: Wheel CE mark: yes Technical condition: good Dkjdpfx Ajq Su Nbjf Doh Visual appearance: good Delivery terms: EXW Production country: IT Please contact Vink Machinery for more information Dieci Pegasus 35.16 * 2011 * Diesel * 15.7 meters lifting height * 13.35 meters horizontal range * 4x4x4 * 3500 kg lifting capacity * 13100 kg own weight * Inspection until May 2024 * including documents

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 18,000 mm, mast type: telescopic, Year of construction: 2019, operating hours: 664 h, General Information Year of manufacture: 2019 Technical Details Number of cylinders: 4 Drive: Wheel Unladen weight: 14,300 kg Functionality Mast: Telescopic (3-section) Mast length: 18 m Lifting capacity: 4,000 kg CE certification: yes Condition Technical condition: very good Visual condition: very good DIECI PEGASUS 40.18 400 EX DEMO TELESCOPIC HANDLER YEAR OF MANUFACTURE: 2019 DRIVE: 4X4X4 MAX. LIFTING CAPACITY: 4,000 KG MAX LIFTING CAPACITY AT 15.3 METERS: 500 KG MAX WORKING HEIGHT: 18 METERS EXTRA HYDRAULIC FUNCTIONS 400° ROTATION TYRES: 405/70/20 2X JOYSTICK CONTROL 1X RADIO REMOTE CONTROL CE CERTIFICATE KUBOTA ENGINE TYPE: V3800-T 4 CYLINDERS 101 HP Dkedpfeuxrv Tex Af Dsh WATER COOLING MAX. DRIVING SPEED: 30 KM/H PALLET FORK HOOK TYPE: BUB 2448 OWN WEIGHT: 60 KG MAX. CAPACITY: 4,000 KG LARGE HYDRAULIC WINCH TYPE: BUD 4475 OWN WEIGHT: 410 KG MAX. CAPACITY: 3,000 KG BUCKET VOLUME: 1.20 M3 ONLY 664 DEMO HOURS!!!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), fuel type: diesel, color: other, axle configuration: 4x4, Year of construction: 2016, operating hours: 12,700 h, Equipment: all wheel drive, Technical information AdBlue system: Yes Drive: Wheel Top speed: 40 km/h Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: BVL1552390 Other information Delivery terms: EXW Production country: IT Additional information Please contact Christiaan Dekker for more information Dieci Pegasus 50.21 Year: 2016 Hours : 12700 CE 4 X 4 X 4 Ad-Blue Manbasket , Forks & Lifthook Dedpfx Afext Nl Hj Dokh Lifting computer Price : Euro. 49.500,-

Condition: excellent (used), Year of construction: 2004, VEGA PEGASSO 145 Production year:2004 Kind of boxes: straight line / crash lock bottom / 4 corners / 6 corners / doble wall boxes Materials: cardboard gr 200 - 800 / corrugated board ( waves: E-F-N-B ) in production actually Dkjdjullg Djpfx Af Deh Available in end of September2024

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 7,470 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 15, Equipment: chip conveyor, documentation/manual, No minimum price – guaranteed sale to the highest bidder! Original price was approx. 200,000 EUR TECHNICAL DETAILS Travel path X-axis: 7,470 mm Travel path Y-axis: 590 mm Travel path Z-axis: 400 mm C-axis: 360° A-axis: available Number of axes: 5 Software: ITALCAM 3D Electrospindle power: 12 kW (0/24,000 rpm) Maximum torque: 9.5 Nm at 12,000 rpm Spindle speed: 24,000 rpm Spindle nose: HSK 63 F Number of spindles: 1 Number of slots in the tool magazine: 15 Spindle cooling: liquid Work area: 2 Dkedpewqfi Eofx Af Doh Machinable sides: 5 Standard clamping devices: 12, independently positionable Tool magazine: 15-position tool holder mounted on the slide Clamping force: 130 kg per clamping device Lubrication nozzles: 1 at the electrospindle Tank capacity: 2.2 liters Slide lubrication: automatic MACHINE DETAILS Dimensions (L x W x H): 9,800 x 3,100 x 3,000 mm Transport dimensions (L x W x H): 9,500 x 2,150 x 2,500 mm Weight: 3,500 kg Rated power: 18 kW Current consumption: 32 A Voltage: 400 V three-phase with transformer Frequency: 50/60 Hz Air pressure: 7 bar Accuracy: 0.1 mm Operating temperature: 10 to 35 °C Air humidity: 75 % Standard colors: RAL 7015 Chip conveyor system: chip conveyor belt Machine safety: safety light barrier on three sides of the machine Operating interface: 17-inch LCD monitor EQUIPMENT - Documentation/manual - Infinitely variable speed setting - Chip conveyor - USB port on the control panel

Condition: excellent (used), functionality: fully functional, power: 103 kW (140.04 HP), fuel type: diesel, color: yellow, overall weight: 16,800 kg, lifting power: 4,500 kg/m, lifting height: 20,600 mm, tire size: 445/65R 22.5, tire condition: 60 %, number of seats: 1, Year of construction: 2007, operating hours: 3,571 h, Equipment: all wheel drive, cabin, onboard computer, pallet forks, Cabin with front and rear window - Lifting 4.5 to at 500 mm - Lifting height 20.60 m - Dieci carriage width 1240 mm - Deuz 4-cylinder engine, power 103 kW - 4-wheel drive transmission - Maximum speed 40 km/h - 445/65R 22.5 Mitas wheels - Hydraulic tilt corrector - 4 hydraulic stands - 360° rotating turret - Empty weight 16,800 kg - Hetronic Nova XL Prop 5L radio control Djdpjv E N Ipjfx Af Dokh 3B6 programming for: Forks - 2500 mm boom - 300 kg platform - 4500 mm boom - 3.8 to winch - 2.5 to winch Accessories: - 300 kg platform including 3 people - 120x40x1200 mm forks - Jib with winch, 1.2 to - 2.5 to winch - Hook 4.5 to

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 506093, ITALMAC Pegaso 5 Axis Centar Dkjdotrvmvepfx Af Doh

Condition: used, Year of construction: 2014, Overview This palletizing and winding line consists of an Ocme  palletizer and two Robopac Genesis stretch wrapping machines, both manufactured in 2014. The line was designed for handling shrink containers and is in good condition. It is suitable for palletizing and wrapping multiple pallet formats and offers a production output of 30,000 bottles per hour, depending on the format. The grouping of the layer formation is done by two Fanuc robots. There are two more Fanucs for the palletizing and the adding of an intermediate layer. The palletizing and winding is part of a complete line, from which some components have already been sold. Technical details Palletizer Manufacturer: Ocme Model: Pegasus F450  Year of construction: 2014 Products processed: Shrink packs: PET 0.75 L 2 x 32 PET 1.0 L 3 x 2 PET 1.5 L 3 x 2 PET 1.5 L 3 x 4 Pallet Formats: Euro Pallet 800 x 1200 Chep Duesseldorfer 600 x 800 Industrial Pallet: 1000 x 1200 Speed: 42,000 bph Double lane, low level infeed Equipment: empty pallet magazine, layer pad magazine, layer pad inserter, safety fencing Wrapping machine (2x) Manufacturer: Robopac   Model: Genesis cube Year of construction: 2014 Additional functions: Film cover unit Processed pallet formats: Same as palletizer Ergonomic lifting device to enter film roll for top cover Dkedow Iqknspfx Af Dsh

Condition: used, Year of construction: 1980, table load: 60,000 kg, table width: 3,500 mm, travel distance X-axis: 2,500 mm, table length: 3,500 mm, Hydrostatic table Dedjuxnzrjpfx Af Dokh Heidenhain ROD encoder for rotation Controlled using Siemens 840C CNC Table Length: 3500mm Table Width: 3500mm Table load: 60000 Movement V-axis:2500mm Rotation B-Axis:720° Length: 6000mm Width: 3500mm Height: 1400mm Weight: 42000kg